鲁米诺化学发光法测定食品中的二氧化硫残留量

建立了一种测定食品中二氧化硫残留量的方法。以鲁米诺作为发光剂,空气中的氧气作为氧化剂,亚硫酸根作为敏化剂,硫酸钴作为鲁米诺-空气-亚硫酸根离子化学发光体系的催化剂,通过测定加入亚硫酸盐溶液前后体系的发光总强度的变化,可确定亚硫酸盐的浓度。应用该方法可准确测定干果干菜等食品中二氧化硫残留量。     

距离选通技术对后向散射抑制作用的理论分析

 从辐射度学的基本理论出发，建立了单CCD像元的距离选通激光主动成像模型。而后考虑成像质量，借助单CCD像元信噪比和图像均方差误差两个指标，阐明了距离选通技术是抑制后向散射、增大成像距离、提高图像质量的有效手段。最后从模型出发，导出了距离选通技术在激光主动成像中应用时一些关键参数的选取原则:(1) 尽可能减小激光脉冲宽度，以克服后向散射的影响；（2） 要能够达到尽可能远的观测距离，在激光功率一定的条件下，激光占空比越大越好；（3）在激光满足一定条件的情况下，脉冲频率越高越好。     

Multivariate analysis of dynamical processes

The analysis of multi-dimensional biomedical systems requires analysis techniques, which are able to deal with multivariate data consisting of both time series as well as point processes. Univariate and bivariate analysis techniques in the frequency domain for time series and point processes are established and investigated, although the number of investigations is strongly biased towards time series. Actual multivariate techniques for time series or hybrids of time series and point processes are scarcely addressed. Here, we present spectral analysis techniques which are able to analyse point processes as well as time series. Thereby, univariate, bivariate as well as multivariate techniques are discussed. Applications to simulated as well as real-world data reveal the abilities of the proposed techniques.     

Real-time observation of structural and orientational transitions during growth of organic thin films

We study kinetically controlled orientational and structural transitions of molecular thin films during growth in situ and in real time, using diindenoperylene (DIP) as an example. By time-resolved surface-sensitive x-ray scattering (out of plane and in plane), we follow the organic molecular beam deposition of DIP on silicon oxide, on stepped sapphire, and on rubrene as an organic model surface. We identify transitions for the few-monolayer (ML) regime, as well as for thick (several 10's of ML) films. We show that the differences in the interaction of DIP with the substrate change the thickness as well as temperature range of the transitions, which include (transient) strain, subtle changes of the orientation, as well as complete reorientation. These effects should be considered rather general features of the growth of organics, which, with its orientational degrees of freedom, is qualitatively different from growth of inorganics.     

Aspects of organic chemistry of fullerenes

Successive additions to [60]fullerene show a remarkable degree of regioselectivity. Two characteristic examples of additions, namely nucleophilic cyclopropanations of 6-6 double bonds as well as formations of 5–6 bridged open azafulleroids, have been systematically investigated by analytical, spectroscopic as well as by computational methods. Regioselective additions to activated positions within the carbon framework of fullerene derivatives are the key steps for both controlled ring opening of the fullerene core and the synthesis of heterofullerenes.     

Factorization of discontinuities of multi-Regge amplitudes

It is shown that an arbitrary discontinuity of an arbitrary multi-Regge amplitude factorizes in a large class of models which encompasses the dual resonance model. It is argued that multiple discontinuities also factorize and that the factorization of discontinuities is expexted to hold on very general grounds as a result of the singularity structure of multiparticle amplitudes. These results allow the full amplitude as well as its discontinuities to be written as a product of Regge propagators, single-, double- and triple-Regge vertices and their discontinuities.     

Specific features of the radiative relaxation of excited states of polymethine dyes of different ionicity in films of photoconductive and nonphotoconductive polymers

The spectral and luminescent properties of film composites based on photoconductive poly-N-epoxipropylcarbazole and nonphotoconductive polyvinylbutyral with admixtures of cationic and anionic polymethine dyes, as well as the effect of an external magnetic field on these properties, are studied. It is found that the magnetic field affects the intensity and kinetics of the delayed fluorescence and recombination luminescence of the cationic dye in photoconductive films. This is explained by specific features of photogeneration of charge pairs, namely, by the participation of the singlet and triplet excited states of dye molecules in this process, as well as by the singlet-triplet conversion in dye molecules and photogenerated charge pairs.     

掺杂MgB_2体系超导电性的一个判据

提出一个计算原子半径差和电负性差的方法,研究了原子半径差Δd和电负性差Δe及它们之比△d/△e与掺杂MgB2体系超导转变温度Tc的关系,发现三者都与转变温度有良好的规律性,对它们进行数值模拟都获得开口向下的抛物线关系。由此,提出用原子半径差、电负性差、及它们之比△d/△e作为提高掺杂二硼化镁超导电性的一个新依据。     

On the Domain of Applicability of General Relativity

We consider the domain of applicability of general relativity (GR), as a classical theory of gravity, by considering its applications to a variety of settings of physical interest as well as its relationship with real observations. We argue that, as it stands, GR is deficient whether it is treated as a microscopic or a macroscopic theory of gravity. We briefly discuss some recent attempts at removing this shortcoming through the construction of a macroscopic theory of gravity. We point out that such macroscopic extensions of GR are likely to be nonunique and involve non-Riemannian geometrical frameworks.     

Effects of high-energy ultrasound on the functional properties of proteins

In recent years, high-energy ultrasound has been used as an alternative to improve the functional properties of various proteins, such as from milk, eggs, soy and poultry. The benefits of implementing this technology depend on the inherent characteristics of the protein source and the intensity and amplitude of the ultrasound, as well as on the pH, temperature, ionic strength, time, and all of the variables that have an effect on the physicochemical properties of proteins. Therefore, it is necessary to establish the optimal conditions for each type of food. The use of ultrasound is a promising technique in food technology with a low impact on the environment, and it has thus become known as a green technology. Therefore, this review focuses on the application of high-energy ultrasound to food; its effects on the functional properties of proteins; and how different conditions such as the frequency, time, amplitude, temperature, and protein concentration affect the functional properties.     

扫描探针声显微镜轻敲模式中相位像的反差机理

根据扫描探针声显微镜(SPAM)轻敲工作模式中探针作周期振动的特点,以及在探针与试样相接触过程中激振力和悬臂探针自由振动的阻尼力很小的假设下,解析求解了探针与试样的碰撞运动方程,得到了最大压痕深度和碰撞时间与探针半径、等效杨氏模量以及界面吸附能等之间的关系式,较直观地说明了SPAM中轻敲模式的相位像反差机理:信号的相位与试样微区的性质、探针振幅、设置点以及试样形貌等有关。并定量预计了纳米金刚石像中的相位差值72.59°,与实验测量平均值73.2°±8.2°一致。同时,合理地解释了实验得到的光学薄膜试样相位像的反差。这些表明SPAM轻敲模式的相位成像是一种纳米分辨率测量材料表面物理性质的成像技术。      

Equation of state at the adiabat of unloading

On the assumption that condensed matter at high pressures and temperatures behaves as an ideal gas, a functional dependence of the adiabatic exponent on the Grüneisen constant was obtained, as well as an equation of state that relates the velocity of the shock front and the mass velocity in the shock wave. The calculated estimates of the rate of unloading for cadmium, tin, aluminum, and iron are given as functions of the mass velocities. A comparison with experimental data shows that such an equation of state sufficiently well describes the behavior of the substance and can be used instead of the conventional semiempirical dependences.     

Investigation of the regimes of mixing of superconducting tunneling structures

The regimes of operation of a superconductor–insulator–superconductor tunnel junction based on three-layer structures Nb/AlOx/Nb and Nb/AlN/NbN as a harmonic mixer (for frequencies of the order of 600 and 20 GHz, respectively) and a frequency up-converter (in the frequency range from 0.1 to 5.0 GHz) have been investigated experimentally. The quasiparticle and Josephson mixing regimes have been compared. It has been shown that, in some practical applications, such as the use of the superconductor–insulator–superconductor junction as a cryogenic harmonic phase detector, the Josephson mixing regime is more preferable, because it can provide a higher signal and a greater signal-to-noise ratio as compared to the quasiparticle mixing regime. It has also been demonstrated that the Josephson mixing regime is promising for the use in signal multiplexing systems for superconducting detectors.     

瞄准制导仪中的调制盘光学系统分析

瞄准制导仪中的调制盘光学系统包含有光束投射系统、光束投影系统和旋转调制盘。基于旋转调制盘图案设计的原理,分析了瞄准制导仪中内、外调制图案与光学系统的配合问题。较详细地分析了激光束投射系统和投影系统。     

Analytical modeling of loss characteristics of a polymer arrayed waveguide grating multiplexer

Theoretical analysis is performed for the loss characteristics of a polymer arrayed waveguide grating (AWG) multiplexer around the central wavelength of 1.55 μm with the wavelength spacing of 1.6 nm. The total loss of the device includes the diffraction loss in the input and output (I/O) slab waveguides, bent loss caused by the AWG and I/O channels, leakage loss resulted from the high refractive index substrate, and propagation loss due to the absorption and scattering of the materials of the device. The effects of some structural parameters on the loss characteristics are investigated and discussed. The computed results show that when we select the core thickness as 4 μm, core width as 6 μm, pitch of adjacent waveguides as 15.5 μm, diffraction order as 50, the number of the arrayed waveguides as 91, that of the I/O channels as 17, confined layer thickness between the core and the substrate as 10 μm, distance between the focal point and the origin as 5500 μm, and central angle between the central waveguide and the x-axis (i.e. the vertical of the symmetrical line of the device) as 60°, the total loss of the device can be dropped to the range 3.79–7.93 dB.     

近红外光谱定性分析中的特征波长筛选研究

提出了一种以样品光谱类间相关系数之和最小为准则进行光谱波长逐步筛选的方法(stepwise selection basing on minimum sum of correlation coefficients, SMCC),以类间距离与类内距离和的比值最大化(符合分析者主观预期目标)作为定性分析中特征波长筛选效果的评价依据,并使用红塔集团提供的2012年17种不同类型工业分级烟叶作为试验样品,以验证筛选方法的有效性。研究表明,采用CO1分级烟叶光谱作为参照类别,筛选出10个特征波长点：采用特征波长计算得到的类内欧氏距离的平均值为采用全部波长计算得到的平均值的1.69倍,采用特征波长计算得到的类间欧氏距离的平均值为采用全部波长计算得到的平均值的3.70倍,采用特征波长计算得到的类间欧氏距离与类内欧氏距离和的比值的平均值为采用全部波长计算得到的平均值的2.21倍。特征波长的类间与类内欧氏距离和的比值增大,说明筛选出来的特征波长能更加有效的表达不同类间的远近关系以及同一类内的离散度,SMCC算法是一种有效的、可应用于近红外光谱定性分析中的特征波长筛选方法。     

Analysis of the informativeness of polarization and nephelometric measurements in diagnostics of the microphysical parameters of erythrocytes

Regression relations are found between the microphysical parameters (MPPs) of human blood erythrocytes and the angular coefficients of linear polarization P(??), as well as between the MPPs of erythrocytes and angular coefficients of linear polarization P(??) together with the directional scattering coefficients ??(??). The efficiency of using these regression relations for determining the MPPs of erythrocytes is estimated. It is shown that the involvement of polarization measurements allows one to reduce the error in the retrieval of MPPs, as well as of the size and volume distribution functions, to ??3%.     

Intensification of alkaline delignification of sugarcane bagasse using ultrasound assisted approach

Ultrasound-assisted approach has been investigated for delignification so as to develop green and sustainable technology. Combination of NaOH with ultrasound has been applied with detailed study into effect of various parameters such as time (operating range of 15–90 min), alkali concentration (0.25 M−2.5 M), solvent loading (1:15–1:30 w/v), temperature (50–90 ˚C), power (40–140 W) and duty cycle (40–70 %) at fixed frequency of 20 kHz. The optimized operating conditions established for the ultrasonic horn were 1 M as the NaOH concentration, 1 h as treatment time, 70˚C as the operating temperature, 1:20 as the biomass loading ratio, 100 W as the ultrasonic power and 70% duty cycle yielding 67.30% as the delignification extent. Comparative study performed using conventional and ultrasonic bath assisted alkaline treatment revealed lower delignification as 48.09% and 61.55% respectively. The biomass samples were characterized by SEM, XRD, FTIR and BET techniques to establish the role of ultrasound during the treatment. The morphological changes based on the ultrasound treatment demonstrated by SEM were favorable for enhanced delignification and also the crystallinity index was more in the case of ultrasound treated material than that obtained by conventional method. Specific surface area and pore size determinations based on BET analysis also confirmed beneficial role of ultrasound. The overall results clearly demonstrated the intensification obtained due to the use of ultrasonic reactors.