喷动床内纳米颗粒气固两相流动的数值模拟

采用欧拉-欧拉双流体模型,颗粒动理学理论模拟颗粒相流动,采用周涛和李洪钟(1999)的力平衡模型预测纳米颗粒聚团尺寸,对喷动床内纳米颗粒聚团流化过程进行了数值模拟,得到了喷动床内纳米颗粒聚团的流化过程,获得喷射区和环隙区内颗粒相速度和浓度分布。分析了喷动床结构和进口气体速度等对纳米颗粒聚团流化特性的影响。由于纳米颗粒的特殊性质,不易形成喷泉区。适当的喷动床结构和进口气体速度有助于形成稳定喷动。     

柱锥体喷动床喷动特性的试验研究

建立了高1500 mm、内径200 mm、锥角60°、喷口直径可变的可视化柱锥体喷动床系统,进行了五种不同颗粒喷动特性的试验,重点考察了床层压降、最小喷动速度和喷泉高度随操作参数的变化。结果表明:升速法与降速法测得的最小喷动速度具有较大的差异,降速法测得的最小喷动速度与经验关联式的计算值吻合较好;最小喷动速度随着静止床高、颗粒直径、喷口直径的增大而变大;随着表观气速的增加,喷泉高度上升,随着静止床高的增加,喷泉高度下降。     

基于摩擦-动力应力模型模拟喷动床气固流动

建立同时考虑颗粒和颗粒之间瞬间碰撞作用(瞬间接触)和非流化下颗粒滑动和滚动运动产生的颗粒半接触作用的颗粒碰撞-摩擦应力模型。推导具有普适性的固相动量守恒方程,建立高颗粒浓度气固两相流动模型,对喷动床内气体颗粒流动过程进行了数值模拟。模拟计算预测喷动床内喷射区、环隙区和喷泉区颗粒流动特性。预测喷动床内颗粒浓度和速度分布与他人实验结果相吻合。     

湍动流化床内气固两相流动特性的数值模拟

采用欧拉-欧拉双流体模型,颗粒动理学方法模拟颗粒脉动流动和κ-ε双方程模型模拟气相湍流流动,考虑气固两相间耦合作用,数值模拟湍动流化床内气固两相流动行为,获得颗粒浓度和颗粒速度分布.计算结果表明湍动流化床呈现下部密相区、上部稀相区的颗粒分布特性.在密相区,沿床径向方向颗粒浓度在床中心处低、壁面逐渐增高;在稀相区颗粒浓度分布较均匀.沿轴向方向颗粒浓度呈底部浓度高、顶部浓度低的"S"型分布.     

变倾角柱锥体喷动床颗粒流速与浓度分布特性

在一喷动床实验装置上,通过CCD拍摄了锥体倾角为60°、45°、30°时,颗粒在喷动床内的流型。采用图像法测速技术,研究了在三种流型条件下,床内颗粒的垂直速度变化趋势、水平速度变化趋势。采用浓度谱成像技术,研究了喷动床锥体倾角在60°、45°、30°条件下,喷动床内颗粒的浓度分布特性。通过以上研究发现,对于本装置,当锥体倾角为60°时,颗粒的速度分布和浓度分布特性最佳。     

导流管喷动床环隙区颗粒流动分析

本文使用光纤测量了导流管喷动床环隙区的速度分布,通过计算颗粒流中的Savage数,Bagnold数和Friction数等准则数,表明该区流动为重力控制,以摩擦应力为主的慢速颗粒流。颗粒速度沿径向近似线性变化,而且其切变率随高度有很大不同。最后研究了表观气速,导流管内径,夹带区高度等对颗粒速度分布的影响。     

喷动床气固流动特性的三维CFD-DEM数值模拟

开展了柱锥形气固流动特性的CFD-DEM耦合三维数值模拟研究。气相场采用基于欧拉坐标体系的k-ε双方程湍流模型,固相场采用基于拉格朗日坐标体系的DEM直接数值模拟方法,跟踪离散颗粒场的每一个颗粒,考虑颗粒与颗粒(壁面)之间的碰撞力、曳力、重力、Magnus升力、saffman升力。颗粒之间的碰撞采用Hertz-Mindlin无滑移模型计算。模拟对象为柱锥形喷动床,其直径为0.152 m,喷口直径为0.019 m,模拟颗粒数22万,探讨了喷动床中射流随时间的发展,不同气速下床内气固流动结构,以及颗粒速度与颗粒浓度的分布,并与实验数据进行了对比。     

气固两相流颗粒相特性参数的测量及其不确定分析

本文介绍一种采用光纤式高速摄影测量装置获取三维柱锥形冷态喷动床试验台内部气固两相流颗粒瞬时速度的测量方法、及其测量不确度的分析。基于获取的颗粒相运动视频,计算出颗粒瞬时速度、颗粒相速度和颗粒温度,它们分别用于表征测量区域中颗粒群流动的快慢和脉动的强弱。测量结果表明:镜头畸变校正环节是影响颗粒瞬时速度测量的主要因素,本测量装置的颗粒瞬时速度的测量不确定度为士2.383%;颗粒相速度在喷泉核心区(r/R≤0.2)为正,绝对值较大,沿半径方向减小到零,然后在r/R=0.45处转变方向并逐渐增大;颗粒温度在区域r/R≤0.2和r/R≥0.65变化显著,对应着喷动床内颗粒喷射上行和下落的主要区域,这证实了公开文献中喷动床内颗粒脉动动能分布的数值模拟结果。     

喷动床内颗粒浓度的实验测量和理论模拟

颗粒浓度对于稠相流动体系中颗粒应力本构方程建立具有决定性的作用。本文采用双流体模型,并结合颗粒流动力学理论来描述固相应力的基础上实现了对喷动床的数值模拟,探讨了从喷射区到环隙区颗粒浓度的理沦变化趋势。同时采用自主开发的电容探针技术,不仅颗粒浓度测量值和理论值吻合较好,而且也准确地验证了颗粒非均匀夹带这一现象。电容探针还可灵敏地分辨出环隙区内不同床高处以及接近壁面处的颗粒浓度的细微变化。     

喷动流化床的数值模拟研究

本文借鉴 Ｃｕｎｄａｌｌ＆ Ｓｔｒａｃｋ提出的碰撞模型,将欧拉方法和拉格朗日法结合起来,建立了喷动流化床气固两相流动的数学模型,在计算机上对试验台进行了模拟,探讨了床内颗粒的运动特征。按１：１的比例建立了喷动流化床的模型试验台并进行了试验,对模拟结果和试验结果进行了比较与分析。颗粒在喷动床内的运动特征,模拟结果都能够再现出来,模拟结果与试验结果取得了很好的一致性。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.