溶剂对镍(Ⅱ)金属有机骨架结构的影响

通过乙酸镍和4-咪唑-1-基-苯甲酸(HL)在不同溶剂热条件下合成了3个新型金属有机骨架化合物[Ni(L)_2]n·DMF(1),Ni(H_2O)_2(L)_2(_2)和Ni(L)_2(CH_3OH)_2(3).化合物1是用N,N-二甲基甲酰胺(DMF)作为溶剂合成的具有菱形孔道的三维骨架化合物;化合物_2是在DMF/H_2O(体积比4∶1)中合成的水作为终端配体参与配位的二维层状化合物,并通过层与层之间的氢键作用构筑形成了三维超分子结构;当溶剂为甲醇时,得到了二维层状化合物3,且甲醇作为终端配体参与配位.磁学和电化学性质研究结果表明,化合物1~3中相邻镍离子之间存在反铁磁相互作用;在一定的电势范围内出现一对明显的Ni(Ⅱ)/Ni(Ⅲ)氧化还原峰,表明化合物1~3是潜在的磁性材料或电催化剂材料.     

两个单核镍含氮配体配合物的合成、晶体结构及荧光性质(英文)

采用回流法在水溶剂中合成了2个含氮配体单核镍配合物[Ni(phen)2(H2O)2](1,6-nds)·2H2O(1)和[Ni(phen)3](1,6-nds)·10H2O(2)(1,6-nds=1,6-萘二磺酸根离子,phen=1,10-邻菲罗啉)。配合物1中,镍离子与2个1,10-邻菲罗啉和2个水分子配位,形成[Ni(phen)2(H2O)2]2+阳离子。2个没有配位的水分子通过氢键与[Ni(phen)2(H2O)2]2+和1,6-萘二磺酸根离子相互连接形成二维层状结构。配合物2中,镍离子与3个1,10-邻菲罗啉配位,形成[Ni(phen)3]2+阳离子。大量的氢键将自由的水分子和1,6-萘二磺酸根离子连接形成三维网状结构。2个配合物中1,6-萘二磺酸根离子均没有与镍离子配位,只是起到平衡电荷的作用。室温下,配合物显示了较大的荧光发射峰,其最大发射峰分别在443和438 nm。     

一种新型Ni(Ⅱ)配位聚合物的合成、晶体结构和性质研究

溶剂热法合成了1个新配位聚合物{[Ni(C18H18N4O5)(DMF)]·(DMF}n.通过元素分析、红外光谱、热重以及X-射线单晶洐射对其进行了表征.该晶体为正交晶系,Pna21空间群.该化合物中,C18H18N4O5配体通过5个配位原子以及相邻的溶剂分子DMF上的1个配位原子与Ni(Ⅱ)原子配位,形成了1个扭曲的八面体配位构型.热重分析表明该化合物在140℃开始发生分解.     

2,2′-二甲基-4,4′-联苯二甲酸构筑的两个金属有机骨架（英文）

以2,2′-二甲基-4,4′-联苯二甲酸(H2L)为配体,采用溶剂热法合成了2个金属有机骨架:[Ni(μ_2-H_2O)(L)(DMF)(H_2O)]·0.5H_2O (1)和[Cd_(2.5)(L)(trz)_3(H_2O)_2]·2.5DMF (2)(DMF=N,N-二甲基甲酰胺,Htrz=1,2,4-三氮唑)。借助红外、热重、粉末和单晶X射线衍射对其进行了表征。单晶结构分析表明,1结晶于单斜晶系的P2_1/c空间群,镍离子处在拉长的[NiO_6]八面体中且分别被μ2-H_2O和L~(2-)配体连接形成二维sql拓扑网络。2结晶于单斜晶系,C2/m空间群,含有3个不同的镉离子且均为扭曲的八面体构型。3个镉离子被三氮唑负离子以μ_(1,2,4)-桥连,在ab平面形成二维的kgd层,这些层再被L~(2-)配体沿c轴支撑形成(4,8)双节点的三维flu拓扑网络。热重分析表明,1和2的网络分别在390和230℃发生分解。     

偶氮桥连羧酸配体与Zn(Ⅱ)构建的二维配位聚合物的合成、晶体结构及荧光性质

合成了化合物3-(5-叔丁基-2-甲氧羰基甲氧基苯基)偶氮苯甲酸甲酯(Me2L),并以此为配体与醋酸锌在水热条件下通过自组装获得了1个二维的配位聚合物{[Zn(H2O)L]·H2O}n(1),通过红外、元素分析及X-射线单晶衍射等检测手段对所合成的化合物进行了结构表征,并测试了其荧光发射性质。相对于配位前驱体H2L的荧光发射,聚合物1的荧光发射略有红移。结构研究表明,该化合物中配体采取了常见的反式构型,形成了沿晶体学ab平面延伸的二维网状结构,聚合物中的溶剂水分子通过氢键连接在二维结构的内部。该配位聚合物的合成对于研究偶氮类配合物的光化学反应奠定了基础。     

三角柔性多羧酸金属有机骨架化合物的合成、结构及荧光性质（英文）

以柔性1,3,5-三(4-羧酸苯氧基)苯(H3TCPB)为配体,以4,4′-联吡啶(4,4′-BPY)为辅助配体,在溶剂热条件下合成了2个新颖的分别具有三核锌簇和三核钴簇的金属有机骨架化合物:{[Zn3(TCPB)2(4,4′-BPY)]·DMF·3H2O}n(1)和{[Co1.5(TCPB)(DMF)(H2O)]·DMF}n(2),通过单晶X射线衍射,红外光谱,元素分析,热重分析和粉末X射线衍射对其结构进行了表征。单晶X射线衍射分析表明化合物1属于三斜晶系,P1空间群,表现出三维(3,8)连接的网状结构,拓扑符号为:{43}2·{46·618·84}·{6};化合物2也属于三斜晶系,P1空间群,为二维(3,6)连接的网络层状结构,拓扑符号为:{43}4·{46·618·84}。此外,荧光性质研究表明固态化合物1在室温条件下发射出源于TCPB3-和4,4′-BPY配体的淡蓝色荧光,而化合物2在相似的条件下没有荧光发射。     

偶氮苯磺酸镍配合物的合成、结构及荧光性质

以镍离子为中心离子,4-[(8-羟基-5-喹啉)偶氮]-苯磺酸(H2L)为配体,通过溶剂热合成反应成功合成配合物Ni2{4-[(8-羟基-5-喹啉)偶氮]-苯磺酸}2(乙二胺)4.通过红外光谱(IR)、元素分析、单晶X-射线衍射(XRD)、粉末X-射线衍射(PXRD)和热重分析(TGA)等方法对其结构进行表征.通过结构分析确定配合物是由2个H2L配体与2个镍离子分别配位形成的离散结构,并且离散结构之间通过多种N—H…O氢键连接形成二维超分子层状结构.荧光测试和理论计算表明,配合物的荧光性能主要来自于配体.     

蝴蝶形单分子配合物的合成、晶体结构及其对水溶液中有害离子的检测

用苯并咪唑基配体5,5′-二(2-苯并咪唑基)-2,2′-联吡啶(H2L)与镍、锌离子溶剂热合成了配合物[Ni(HL)(HCOO)(H2O)](1)和[Zn(H2L)(H2O)2](NO3)2(2)。X射线单晶测试表明镍与锌配合物的晶体结构是只含一个配体和一个金属离子的蝴蝶形单分子。配合物分子之间存在大量分子间氢键,配合物1通过分子间氢键连接成了二维层状结构,配合物2通过分子间氢键连接成了三维超分子结构。配合物1和2在水溶液中很稳定,且能够微溶于水。荧光测试表明配合物2的固体及在水溶液中都具有很强的荧光性质,且能够在水溶液中高选择性、高灵敏度检测有害重金属离子Hg^2+及氧化性阴离子Cr2O7^2-。     

4，4′-二羧基二苯基砜的镧系配合物的合成和结构

合成了V型半刚性配体4,4'-二羧基二苯基砜的3个新的镧系配合物[Nd2(dbsf)3(DMF)225(H2O)1.75·1.25DMF·0.5MeOH(1),[Yb2(dbsf)3(H2O)2]·1.5H2O(2)和[Er2(dbsf)3(H2O)2]·0.75H2O(3)(H2dbsf=4,4'-二羧基二苯基砜,DMF=N,N-二甲基甲酰胺,MeOH=甲醇),并测定了它们的晶体结构.结构表明配合物1具有一维孔道的三维镧系金属,有机骨架结构(LnOF),未配位的DMF和MeOH填充在孔道中;配合物2和3也具有三维的LnOF结构,但晶格水存在于洞穴里.它们的形成与结构特征可能与半刚性V型配体H2dbsf和镧系收缩效应有关.     

2,6-二(1-咪唑基)萘和二羧酸构筑的金属-有机框架化合物：合成、晶体结构和荧光识别性能（英文）

利用2,6-二(1-咪唑基)萘(L)和二羧酸配体与过渡金属盐反应,通过溶剂热法合成了3个新颖的金属有机框架化合物(MOFs):[Co(L)(AIP)]·2DMF (1),[Co(L)(AIP)]·DMF (2)和[Co(L)(IDC)(H2O)2]·0.5L·H2O (3)(H2AIP=5-氨基间苯二甲酸,H2IDC=4,4′-亚氨基二苯甲酸)。利用元素分析、红外、X射线单晶和粉末衍射、热重分析等对MOFs进行了表征。单晶结构解析结果表明:1属于单斜晶系C2/c空间群,2和3属于三斜晶系P1空间群。1和3均为一维的链状结构,2为二维的层状结构,三者通过氢键作用形成三维超分子结构。此外,对MOFs的热稳定性和荧光性质进行了研究,发现3通过荧光猝灭对丙酮分子具有识别作用。     

Syntheses and Crystal Structures of Copper（Ⅱ） and Nickel Complexes with 1,2,3-Triazole-carboxylic Acid

Three novel complexes [Cu(L1)2(H2O)2] (1), [Ni(L1)2(H2O)2]·(H2O)4(2,HL1=5-methyl-1-(4-methylphenyl)-1,2,3-triazole-4-carboxylic acid) and [Ni2 (HL2)2(CH3OH)6]·(CH3OH)2(3,H3L2=1,2,3-triazole-4,5-dicarboxylic acid) were synthesized and characterized by elemental analysis, IR and X-ray diffraction. Complexes 1 and 2 are mononuclear structures, and are assembled into a two-dimensional sheet by C(7) H(7)···O(3) weak interactions or hydrogen-bonding interaction. Complex 3 is a centrosymmetric dinuclear structure, and is assembled into a three-dimensional supramolecular structure by hydrogen-bonding interaction.     

新型吡啶基羧酸席夫碱配体镍配合物的合成和晶体结构

通过新合成的吡啶基羧酸席夫碱配体（5-(吡啶基-3-亚甲基氨基)间苯二甲酸H2L）,和镍盐反应制备了一个新的镍配合物{[Ni(HL)₂(H₂O)₂]·2H₂O}_n(1),利用元素分析及X-射线单晶衍射对其进行了表征。结构分析结果表明标题化合物属于三斜晶系,P1 空间群,晶胞参数为a=0.764 79(11) nm,b=0.870 49(13) nm,c=1.081 13(16) nm,α=85.583(2)°,β=82.614(2)°,γ=81.565(2)°,V=0.704 82(18) nm³,Z=1,D_c=1.586 g·cm^-3,μ=0.763 mm^-1,F(000)=350。在配合物的结构中,Ni(Ⅱ)的配位构型为畸变的八面体。配合物中每个配体通过羧酸氧和吡啶氮原子和金属配位形成一维链状结构,并通过体系中丰富的氢键作用链接成为三维框架并加以稳定。     

基于香豆素Schiff碱双核Ni（Ⅱ）和立方烷型Cu4（μ3-O）4的四核Cu（Ⅱ）配合物的合成、晶体结构及光谱性质（英文）

合成了2个3-氨基-4-羟基香豆素类Schiff碱双核Ni?髤和立方烷型Cu4(μ3-O)4的四核Cu?髤配合物,[Ni(L1)(DMF)(H2O)]2(1)(H2L1=3-((5-溴-2-羟基-亚苄基)-氨基)-4-羟基-苯并吡喃-2-酮)和[Cu4(L2)4]·DMF·CH3OH·2H2O(2)(H2L2=4-羟基-3-((2-羟基-3-甲氧基-亚苄基)-氨基)-苯并吡喃-2-酮),并通过元素分析、红外光谱、紫外光谱、荧光光谱及X射线单晶衍射分析等手段进行了表征。X射线单晶衍射分析结果表明:配合物1具有双核结构,由2个金属离子和2个配体单元组成,配合物2具有立方烷型Cu4(μ3-O)4的四核结构,由4个金属离子和4个配体单元组成。配合物1是单斜晶系、C2/c空间群;配合物2是四方晶系,I41/a空间群,且中心金属Ni?髤和Cu?髤离子的空间构型均为六配位的扭曲的八面体。此外,配合物1通过分子间氢键、C-H…π及π…π作用形成1D超分子链结构,配合物2通过分子内氢键和π…π作用形成3D超分子结构。此外,研究了H2L1,H2L2及其相应的Ni?髤和Cu?髤配合物的荧光性质。     

Structural and magnetic studies of Schiff base complexes of nickel(II) nitrite: change in crystalline state, ligand rearrangement and a very rare μ-nitrito-1κO:2κN:3κO' bridging mode

Four new nickel(II) complexes, [Ni(2)L(2)(NO(2))(2)]·CH(2)Cl(2)·C(2)H(5)OH, 2H(2)O (1), [Ni(2)L(2)(DMF)(2)(μ-NO(2))]ClO(4)·DMF (2a), [Ni(2)L(2)(DMF)(2)(μ-NO(2))]ClO(4) (2b) and [Ni(3)L'(2)(μ(3)-NO(2))(2)(CH(2)Cl(2))](n)·1.5H(2)O (3) where HL = 2-[(3-amino-propylimino)-methyl]-phenol, H(2)L(') = 2-({3-[(2-hydroxy-benzylidene)-amino]-propylimino}-methyl)-phenol and DMF = N,N-dimethylformamide, have been synthesized starting with the precursor complex [NiL(2)]·2H(2)O, nickel(ii) perchlorate and sodium nitrite and characterized structurally and magnetically. The structural analyses reveal that in all the complexes, Ni(II) ions possess a distorted octahedral geometry. Complex 1 is a dinuclear di-μ(2)-phenoxo bridged species in which nitrite ion acts as chelating co-ligand. Complexes 2a and 2b also consist of dinuclear entities, but in these two compounds a cis-(μ-nitrito-1κO:2κN) bridge is present in addition to the di-μ(2)-phenoxo bridge. The molecular structures of 2a and 2b are equivalent; they differ only in that 2a contains an additional solvated DMF molecule. Complex 3 is formed by ligand rearrangement and is a one-dimensional polymer in which double phenoxo as well as μ-nitrito-1κO:2κN bridged trinuclear units are linked through a very rare μ(3)-nitrito-1κO:2κN:3κO' bridge. Analysis of variable-temperature magnetic susceptibility data indicates that there is a global weak antiferromagnetic interaction between the nickel(ii) ions in four complexes, with exchange parameters J of -5.26, -11.45, -10.66 and -5.99 cm(-1) for 1, 2a, 2b and 3, respectively.     

Investigation of porous Ni-based metal-organic frameworks containing paddle-wheel type inorganic building units via high-throughput methods

In the search of Ni based metal-organic frameworks (MOFs) containing paddle-wheel type building units, three chemical systems Ni(2+)/H(n)L/base/solvent with H(n)L = H(3)BTC (1,3,5-benzenetricarboxylic acid), H(3)BTB (4,4',4',-benzene-1,3,5-triyl-tris(benzoic acid)), and H(2)BDC (terephthalic acid) were investigated using high-throughput (HT) methods. In addition to the conventional heating, for the first time HT microwave assisted synthesis of MOFs was carried out. Six new compounds were discovered, and their fields of formation were established. In the first system, H(3)BTC was employed and a comprehensive HT-screening of compositional and process parameters was conducted. The synthesis condition for the Ni paddle-wheel unit was determined and two compounds [Ni(3)(BTC)(2)(Me(2)NH)(3)]·(DMF)(4)(H(2)O)(4) (1a) and [Ni(6)(BTC)(2)(DMF)(6)(HCOO)(6)] (1b) were discovered (Me(2)NH = dimethylamine, DMF = dimethylformamide). In the second system, the use of the extended tritopic linker H(3)BTB and the synthesis conditions for the paddle-wheel units led to the porous MOF, [Ni(3)(BTB)(2)(2-MeIm)(1.5)(H(2)O)(1.5)]·(DMF)(9)(H(2)O)(6.5) (2), (2-MeIm = 2-methylimidazole). This compound shows a selective adsorption of H(2)O and H(2) with a strong hysteresis. In the third system, H(2)BDC was used, and the base (DABCO) was incorporated as a bridging ligand into all structures. Thus, two pillared layered porous MOFs [Ni(2)(BDC)(2)(DABCO)]·(DMF)(4)(H(2)O)(1.5) (3a) and [Ni(2)(BDC)(2)(DABCO)]·(DMF)(4)(H(2)O)(4) (3b) as well as a layered compound [Ni(BDC)(DABCO)]·(DMF)(1.5)(H(2)O)(2) (3c) were isolated. The 3a and 3b polymorphs of the [Ni(2)(BDC)(2)(DABCO)] framework can be selectively synthesized. The combination of microwave assisted heating, low overall concentration, stirring of the reaction mixtures, and an excess of DABCO yields a highly crystalline pure phase of 3b. The fields of formation of all compounds were established, and scale-up was successfully performed for 1b, 2, 3a, 3b, and 3c. All compounds were structurally characterized. In addition to IR, elemental and TG analyses, gas and vapor sorption experiments were carried out.     

镍螺旋化合物及其杂银配位聚合物的设计合成与结构

采用两个易扭转异构的双三齿有机配体，双吡啶二甲基-6,6′-二酰肼-2,2′-连吡啶(H₂L¹)和双吡啶二乙基-6,6′-二酰肼-2,2′-连吡啶(H₂L²)，和金属镍离子组装得到2个金属螺旋体(helicate)，Ni₂(HL¹)₂(PF₆)(BF₄)(CH₃OH)(H₂O)₂ (1)和Ni₂(HL²)(H₂L²)(ClO₄)₃(C₂H₅OH)(CH₃OH)H₂O)₃ (2),并测定了它们的晶体结构。同时由配体H₂L³出发,通过逐级组装的方法,得到一个镍-银杂金属的配位聚合物Ni₂Ag₂(HL³)₂(ClO₄)₂(CH₃CN)₃ (3)。单晶结构表明，配位聚合物3中配体H₂L³首先与镍离子组装成分子盒化合物(molecular box)，该结构单元进一步通过Ag离子与分子盒外围N原子配位，使分子盒互相串连成一维配位聚合物3，分子盒聚集体沿c方向伸展成一维链结构，链与链之间相互平行，进一步堆积成二维孔道结构。     

Two ligand-functionalized Pb(ii) metal-organic frameworks: structures and catalytic performances

A microporous Pb(ii) metal-organic framework (MOF) [PbL(2)]·2DMF·6H(2)O (1) has been assembled from a N-oxide and amide doubly functionalized ligand HL (= N-(4-carboxyphenyl)isonicotinamide 1-oxide). Complex 1 features a three-dimensional (3D) framework possessing one-dimensional (1D) rhombic channels with dimensions of 13 × 13 ?(2). The 3D framework is built up from 1D PbO(2) chains that link ligands in parallel fashion to construct single-wall channels. When recrystallizing 1 in a DMSO-DMF mixture (3?:?5 v/v), a new coordination polymer, [PbL(2)]·DMF·2H(2)O (2), was obtained. Complex 2 is also a 3D framework containing 1D rectangular channels, but the channel dimensions become reduced in size to 13 × 8 ?(2) due to reorganization of the Pb(ii) coordination environment. The PbO(2) chains in 2 are reformed to link ligands in a double-wall fashion, significantly reducing the channel size. Even though, the guest exchange study indicates that the DMF molecules in 2 could be replaced with benzene molecules when immersing in benzene solvent, showing single-crystal-to-single-crystal (SC-SC) guest exchange in the solid state and leading to a daughter crystal [PbL(2)]·0.5C(6)H(6)·2H(2)O (2'). Desolvated 1 and 2 display preferential adsorption behaviors of water vapour over CO(2) due to the hydrophilic nature of the channels and the strong host-guest interactions. Catalytic tests indicate that desolvated 1 and 2 have size-selective catalytic activity towards the Knoevenagel condensation reaction.     

A series of novel lanthanide carboxyphosphonates with a 3D framework structure: synthesis, structure, and luminescent and magnetic properties

By introduction of 1,4-benzenedicarboxylic acid as the second organic ligand, a series of novel lanthanide carboxyphosphonates with a 3D framework structure, namely, [Ln(3)(H(2)L)(HL)(2)(bdc)(2)(H(2)O)]·7H(2)O (Ln = La (), Ce (), Pr (), Nd (), Sm (), Eu (), Gd (), Tb (); H(3)L = H(2)O(3)PCH(2)NC(5)H(9)COOH; H(2)bdc = HOOCC(6)H(4)COOH) have been synthesized under hydrothermal conditions. Compounds are isostructural and feature a 3D framework in which Ln(iii) polyhedra are interconnected by bridging {CPO(3)} tetrahedra into 2D inorganic layers parallel to the ab plane. The organic groups of H(2)L(-) are grafted on the two sides of the layer. These layers are further cross-linked by the bdc(2-) ligands from one layer to the Ln atoms from the other into a pillared-layered architecture with one-dimensional channel system along the a axis. The thermal stability of compounds has been investigated. Luminescent properties of compounds , and the magnetic properties of compound have also been studied.     

Hydrothermal synthesis, structures, and luminescent properties of zinc(II) and cadmium(II) phosphonates with a 3D framework structure using terephthalate as second linkers

By introduction of 1,4-benzenedicarboxylic acid as a second organic ligand, two new divalent metal(II) phosphonates with a 3D framework structure, namely, [Zn(HL1)(bdc)(0.5)] (1) and [Cd(1.5)(HL2)(bdc)(0.5)] (2) (H(2)L1 = H(2)O(3)PCH(NH(2))C(6)H(5), H(3)L2 = H(2)O(3)PCH(2)-NC(5)H(9)-COOH, H(2)bdc = HOOCC(6)H(4)COOH), have been synthesized under hydrothermal conditions. The two compounds show three-dimensional (3D) framework structure with infinite two-dimensional (2D) networks pillared by H(2)bdc. For compound 1, the {ZnO(4)} polyhedra are interconnected by phosphonate groups into a 2D layer, and the adjacent layers are further cross-linked via the bdc(2-) anions to generate a three-dimensional framework structure with two types of channel system along the c-axis. A notable feature of compound 1 is the presence of alternate left- and right-handed helical chains in the structure. In compound 2, the inorganic chains, composed of {Cd(1)O(7)}, {Cd(2)O(4)} and {CPO(3)} polyhedra, are linked by HL2(2-) ligands to form a double layer structure in the ab plane, and the adjacent layers are further linked by the bdc(2-) anions to form a 3D framework structure with one-dimensional channel systems along the a-axis. Luminescence properties of compounds 1 and 2 have also been studied.     

Neutral mononuclear, dinuclear, tetranuclear d7/d10 metal complexes containing bis-pyrazole/pyridine ligands supported by 2,6-bis(3-pyrazolyl)pyridine: synthesis, structure, spectra, and catalytic activity

A series of novel bis-pyrazole/pyridine complexes, [Zn(2)(HL(1))(2)(μ(2)-SO(4))](2)·EtOH·H(2)O (1), [Co(2)(HL(1))(2)(μ(2)-SO(4))](2)·2DMF·6H(2)O (2), [Zn(4)(HL(1))(4)(μ(4)-SO(4))][OH](2) (3), [Zn(2)(HL(2))(2)(μ(2)-SO(4))]·2H(2)O (4), [Zn(H(2)L(2))(H(2)O)(2)](SO(4))·0.87H(2)O (5) (H(2)L(1) = 2,6-di-(5-phenyl-1H-pyrazol-3-yl)pyridine, H(2)L(2) = 2,6-di-(5-methyl-1H-pyrazol-3-yl)pyridine), were synthesized hydrothermally from the self-assembly of Zn(II) or Co(II) with different types of bipyrazolyl/pyridine derivative ligands. All the complexes were characterized by elemental analysis, IR and UV-vis spectroscopy, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction. Structural analyses revealed that metal atoms (Zn and Co) in complexes 1-5 are five-coordination modes, forming slightly distorted trigonal bipyramidal geometries. In complexes 1-3, H(2)L(1) ligand connected the two metal centers via the tetradentate fashion, and the same form of connection was found in complex 4 with H(2)L(2) ligand. While in complex 5, H(2)L(2) only connected with one metal center via the tridentate fashion, which was different from those in complexes 1-4. Additionally, there are abundant hydrogen bonding interactions in complexes 1-4. Interestingly, for hydrogen bonding connecting fashions being different, the molecules for the complexes 1 and 4 are held together by the hydrogen bond to form a 1D supramolecular structure, whereas complexes 2 and 3 are a hydrogen bonded dimer. In addition, quantum chemical calculations for 1, 3, and 4, thermal behaviors and photoluminescent properties for 1 and 3-5 were performed and discussed in detail. In the mean time, we found that these complexes had potential catalytic activity for the oxidation reaction of cyclohexane.