Numerical simulation of nanoparticle melting inside a matrix

A theoretical model is proposed for describing the melting of a metal nanoparticle embedded into a solid matrix. The model is based on a thermodynamic approach that takes into account matrix elasticity. The melting process is described for gold nanoparticles embedded in a solid matrix whose elastic modulus is varied in a wide range. Both spherical and ellipsoidal particles are considered. It is shown that particle melting temperature can be both higher and lower than the melting point of a bulk sample depending on the interaction intensity of the solid and liquid particle surfaces with the matrix. An increase in the shear modulus of the matrix causes a rise in the nanoparticle melting temperature, with the effect of the matrix elasticity becoming noticeable at some critical shear modulus. The conditions are revealed at which only a surface layer of a nanoparticle, the thickness of which depends on the particle radius and temperature, is melted.     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.     

Sharp melting in DNA-linked nanostructure systems: thermodynamic models of DNA-linked polymers

Sharp melting that has been found for DNA-linked nanostructure systems such as DNA-linked gold nanoparticles enhances the resolution of DNA sequence detection enough to distinguish between a perfect match and single base pair mismatches. One intriguing explanation of the sharp melting involves the cooperative dehybridization of DNA strands between the nanostructures. However, in the DNA-linked gold nanoparticle system, strong optical absorption by the gold nanoparticles hinders the direct observation of cooperativity. Here, with a combination of theory and experiment, we investigate a DNA-linked polymer system in which we can show that the optical profile of the system at 260 nm is directly related to the individual DNA dehybridization profile, providing a clear distinction from other possible mechanisms. We find that cooperativity plays a crucial role in determining both the value of the melting temperature and the shape of the melting profile well away from the melting temperature. Our analysis suggests that the dehybridization properties of DNA strands in confined or dense structures differ from DNA in solution.     

Two-stage melting of Au-Pd nanoparticles

Several series of molecular dynamics runs were performed to simulate the melting transition of bimetallic cuboctahedral nanoparticles of gold-palladium at different relative concentrations to study their structural properties before, in, and after the transition. The simulations were made in the canonical ensemble, each series covering a range of temperatures from 300 to 980 K, using the Rafii-Tabar version of the Sutton and Chen interatomic potential for metallic alloys. We found that the melting transition temperature has a strong dependence on the relative concentrations of the atomic species. We also found that, previous to the melting transition, the outer layer of the nanoparticle gets disordered in what can be thought as a premelting stage, where Au atoms near the surface migrate to the surface and remain there after the particle melts as a whole. The melting of the surface below Tm is consistent with studies of the interaction of a TEM electron beam with Au and Au-Pd nanoparticles.     

Spectroscopic characterizations of molecularly linked gold nanoparticle assemblies upon thermal treatment

The understanding of surface properties of core-shell type nanoparticles is important for exploiting the unique nanostructured catalytic properties. We report herein findings of a spectroscopic investigation of the thermal treatment of such nanoparticle assemblies. We have studied assemblies of gold nanocrystals of approximately 2 nm core sizes that are capped by alkanethiolate shells and are assembled by covalent or hydrogen-bonding linkages on a substrate as a model system. The structural evolution of the nanoparticle assemblies treated at different temperatures was probed by several spectroscopic techniques, including UV-visible, Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The results show that the capping/linking shell molecules can be effectively removed to produce controllable surface and optical properties. The data further revealed that the thermally induced evolution of the surface plasmon resonance property of gold nanoparticles is dependent on the chemical nature of the linker molecule. The spectral evolution is discussed in terms of changes in particle size, interparticle distance, and dielectric medium properties, which has important implications for controlled preparation and thermal processing of core-shell nanostructured metal catalysts.     

Immobilization of the nanoparticle monolayer onto self-assembled monolayers by combined sterically enhanced hydrophobic and electrophoretic forces

The immobilization of surface-derivatized gold nanoparticles onto methyl-terminated self-assembled monolayers (SAMs) on gold surface was achieved by the cooperation of hydrophobic and electrophoretic forces. Electrochemical and scanning probe microscopy techniques were utilized to explore the influence of the SAM's structure and properties of the nanoparticle/SAM/gold system. SAMs prepared from 1-decanethiol (DT) and 2-mercapto-3-n-octylthiophene (MOT) were used as hydrophobic substrates. The DT SAM is a closely packed and organized monolayer, which can effectively block the underlying gold and inhibit a variety of solution species including organic and inorganic molecules from penetrating, whereas the MOT monolayer is poorly packed or disorganized (because of a large difference in dimension between the thiophene head and the alkylchain tail) and permeable to many organic probes in aqueous solution but not to inorganic probes. Thus, the MOT monolayer provides a more energetically favorable hydrophobic surface for the penetration and adsorption of organic species than the DT monolayer. This hypothesis is supported by experiments in which the density of hydrophobically immobilized nanoparticles on the MOT SAM is much larger than that on the DT SAM. The results also suggest new approaches for modification of macroscopic surfaces with nanoscopic particles.     

Molecular dynamics simulation of titanium dioxide nanoparticle sintering

Nanoparticles have been an area of active research in recent years due to their properties, which can be greatly different from the bulk. In this work, we study the sintering of TiO2 nanoparticles using molecular dynamics simulations. Such sintering occurs in flame reactors where nanotitania is prepared via the chloride process. Decrease in free energy due to reduction in surface area is the main driving force for sintering of particles. Simulations, at various starting temperatures and orientations, indicate that the process of sintering is strongly affected by temperature and initial orientation. Extremely high diffusion of ions in the neck region of sintering nanoparticles supports the idea that solid-state diffusion is significant in metal-oxide nanoparticle sintering. It is found that the dipole-dipole interaction between sintering nanoparticles plays a very important role at temperatures away from the melting point. The duration of the simulation is not enough to observe the complete sintering process, but important initial stages are well studied.     

Stability and Morphology of Gold Nanoisland Arrays Generated from Layer-by-Layer Assembled Nanoparticle Multilayer Films: Effects of Heating Temperature and Particle Size

This article reports the effects of heating temperature and composition of nanoparticle multilayer films on the morphology, stability, and optical property of gold nanoisland films prepared by nanoparticle self-assembly/heating method. First, nanoparticle-polymer multilayer films are prepared by the layer-by-layer assembly. Nanoparticle multilayer films are then heated at temperature ranging from 500 °C to 625 °C in air to induce an evaporation of organic matters from the films. During the heating process, the nanoparticles on the solid surface undergo coalescence, resulting in the formation of nanostructured gold island arrays. Characterization of nanoisland films using atomic force microscopy and UV-vis spectroscopy suggests that the morphology and stability of gold island films change when different heating temperatures are applied. Stable gold nanoisland thin film arrays can only be obtained after heat treatments at or above 575 °C. In addition, the results show that the use of nanoparticles with different sizes produces nanoisland films with different morphologies. Multilayer films containing smaller gold nanoparticles tend to produce more monodisperse and smaller island nanostructures. Other variables such as capping ligands around nanoparticles and molecular weight of polymer linkers are found to have only minimal effects on the structure of island films. The adsorption of streptavidin on the biotin-functionalized nanoisland films is studied for examining the biosensing capability of nanoisland arrays.     

Thermodynamics of DNA hybridization on gold nanoparticles

Dynamic light scattering is used as a sensitive probe of hybridization on DNA-functionalized colloidal gold nanoparticles. When a target DNA strand possesses an 8 base "dangling end", duplex formation on the surface of the nanoparticles leads to an increase in hydrodynamic radius. Duplex melting is manifested in a drop in hydrodynamic radius with increasing temperature, and the concentration dependence of the melting temperature provides a measure of the thermodynamics of binding. The hybridization thermodynamics are found to be significantly lower at higher hybridization densities than those previously reported for initial hybridization events. The pronounced deviation from Langmuir adsorption behavior is greater for longer duplexes, and it is, therefore, consistent with electrostatic repulsion between densely packed oligonucleotides. The results have implications for sensing and DNA-directed nanoparticle assembly.     

Equilibrium morphology of face-centered cubic gold nanoparticles >3 nm and the shape changes induced by temperature

Many of the unique properties of metallic nanoparticles are determined not only by their finite size but also by their shape, defined by the crystallographic orientation of the surface facets. These surfaces (and therefore the nanoparticles themselves) may differ in a number of ways, including surface atom densities, electronic structure, bonding, chemical reactivities, and thermodynamic properties. In the case of gold, it is known that the melting temperature of nanoparticles strongly depends on the crystal size and that the shape may alter considerably (and yet somewhat unpredictably) during annealing. In this work we use first principle calculations and a thermodynamic model to investigate the morphology of gold nanoparticles in the range 3-100 nm. The results predict that the equilibrium shape of gold nanoparticles is a modified truncated octahedron and that the (size-dependent) melting of such particles is preceded by a significant change in the nanoparticle's morphology.     

Generalized route to metal nanoparticles with liquid behavior

We report the generalized synthesis of metal nanoparticles with liquid-like behavior. We introduce a thiol-containing ionic liquid, N,N-dioctyl-N-(3-mercaptopropyl)-N-methylammonium bromide, which serves as a ligand for platinum, gold, palladium, and rhodium nanoparticles. A rapid reduction using THF-soluble metal salts in the presence of the thiol generates nanoparticles with tunable sizes and size distributions. The as-synthesized nanoparticles are a solid and decompose before melting. Upon exchange of the halide anion for an amphiphilic sulfonate anion, however, the nanoparticles exhibit liquid-like properties at room temperature. The liquids have high metal loadings; for example, the 2.7 nm platinum nanoparticle liquid is 36% platinum by mass.     

What controls the melting properties of DNA-linked gold nanoparticle assemblies?

We report a series of experiments and a theoretical model designed to systematically define and evaluate the relative importance of nanoparticle, oligonucleotide, and environmental variables that contribute to the observed sharp melting transitions associated with DNA-linked nanoparticle structures. These variables include the size of the nanoparticles, the surface density of the oligonucleotides on the nanoparticles, the dielectric constant of the surrounding medium, target concentration, and the position of the nanoparticles with respect to one another within the aggregate. The experimental data may be understood in terms of a thermodynamic model that attributes the sharp melting to a cooperative mechanism that results from two key factors: the presence of multiple DNA linkers between each pair of nanoparticles and a decrease in the melting temperature as DNA strands melt due to a concomitant reduction in local salt concentration. The cooperative melting effect, originating from short-range duplex-to-duplex interactions, is independent of DNA base sequences studied and should be universal for any type of nanostructured probe that is heavily functionalized with oligonucleotides. Understanding the fundamental origins of the melting properties of DNA-linked nanoparticle aggregates (or monolayers) is of paramount importance because these properties directly impact one's ability to formulate high sensitivity and selectivity DNA detection systems and construct materials from these novel nanoparticle materials.     

Determination of the minimum temperature required for selective photothermal destruction of cancer cells with the use of immunotargeted gold nanoparticles

Laser photothermal therapy of cancer with the use of gold nanoparticles immunotargeted to molecular markers on the cell surface has been shown to be an effective modality to selectively kill cancer cells at much lower laser powers than those needed for healthy cells. To elucidate the minimum light dosimetry required to induce cell death, photothermal destruction of two cancerous cell lines and a noncancerous cell line treated with antiepidermal growth factor receptor (anti-EGFR) antibody-conjugated gold nanoparticles is studied, and a numerical heat transport model is used to estimate the local temperature rise within the cells as a result of the laser heating of the gold nanoparticles. It is found that cell samples with higher nanoparticle loading require a lower incident laser power to achieve a certain temperature rise. Numerically estimated temperatures of 70-80 degrees C achieved by heating the gold particles agree well with the measured threshold temperature for destruction of the cell lines by oven heating and those measured in an earlier nanoshell method. Specific binding of anti-EGFR antibody to cancerous cells overexpressing EGFR selectively increases the gold nanoparticle loading within cancerous cells, thus allowing the cancerous cells to be destroyed at lower laser power thresholds than needed for the noncancerous cells. In addition, photothermal therapy using gold nanoparticles requires lower laser power thresholds than therapies using conventional dyes due to the much higher absorption coefficient of the gold nanoparticles.     

Molecular dynamics simulations of the melting of aluminum nanoparticles

Molecular dynamics simulations are performed to determine the melting points of aluminum nanoparticles of 55-1000 atoms with the Streitz-Mintmire [Phys. Rev. B 1994, 50, 11996] variable-charge electrostatic plus potential. The melting of the nanoparticles is characterized by studying the temperature dependence of the potential energy and Lindemann index. Nanoparticles with less than 850 atoms show bistability between the solid and liquid phases over temperature ranges below the point of complete melting. The potential energy of a nanoparticle in the bistable region alternates between values corresponding to the solid and liquid phases. This bistability is characteristic of dynamic coexistence melting. At higher temperatures, only the liquid state is stable. Nanoparticles with more than 850 atoms undergo a sharp solid-liquid-phase transition characteristic of the bulk solid phase. The variation of the melting point with the effective nanoparticle radius is also determined.     

Electroactive gold nanoparticles protected by 4-ferrocene thiophenol monolayer

Numerous reports have focused on ferrocene-terminated electroactive self-assembled monolayers (SAMs) on a flat Au surface but only a few on ferrocene SAMs on Au colloid. In this paper, we employ 4-ferrocene thiophenol as a novel capping agent to produce electroactive gold nanoparticles in consideration of the peculiar pi-conjugated structure. Transmission electron microscopy shows the narrow-dispersed gold core with an average core diameter of ca. 2.5 nm. UV/vis spectra examine the pi-conjugated structure of 4-ferrocene thiophenol and surface plasmon absorbance of the indicated gold nanoparticles. X-ray photoelectron spectroscopy reveals electronic properties of the Au core and thiol ligands. Electrochemical measurement shows that the oxidation peak current is proportional to the scan rate, indicating the electrode process is controlled by adsorbed layer reaction. The formal potential of the Fc-MPCs is compared with that of free ferrocene in MeCN solution and the Fc-SAMs. The shifts are attributed to the phenyl moiety in the 4-ferrocene thiophenol and dielectric constant of the solvation environment.     

Effect of chain length of some 2D and 3D alkanethiols on gold studied by DSC and voltammetry

Striking similarities and differences in the behaviour of two-dimensional (2D) self-assembled monolayers (SAMs) on gold and corresponding three-dimensional (3D) SAMs on gold of two alkanethiols of different chain lengths, hexadecanethiol (HDM) and octadecanethiol (ODM) were investigated as a function of temperature. Cyclic Voltammetry (CV) of the 2D SAMs and Differential Scanning Calorimetry (DSC) of the 3D SAMs were used to study previously unexplained behaviour. CV revealed two transition temperatures in both the HDM and ODM 2D systems. In the DSC studies, both a lower and higher temperature transition was observed in the 3D SAMs of HDM but only one temperature transition was observed in the 3D SAMs of ODM. It was deduced that the lower temperature transitions in the gold-alkanoate nanoparticles were related to interaction between the methyl group chain ends. The lower temperature transition was observed in the 3D system of HDM but not that of ODM because the curvature in the 3D system that is absent in the 2D system reduces the interaction between the alkyl chain ends due to a longer chain resulting in an increased distance between the end groups. It was concluded that the lower transition temperature was attributed to the disordering of the alkyl chains starting from the end closest to the terminal groups.     

A molecular-dynamics study of structural and physical properties of nitromethane nanoparticles

The structural and physical properties of nanoparticles of nitromethane are studied by using molecular dynamics methods with a previously developed force field. [Agrawal et al., J. Chem. Phys. 119, 9617 (2003).] This force field accurately predicts solid- and liquid-state properties as well as melting of bulk nitromethane. Molecular dynamics simulations of nanoparticles with 480, 240, 144, 96, 48, and 32 nitromethane molecules have been carried out at various temperatures. The carbon-carbon radial distribution function, dipole-dipole correlation function, core density, internal enthalpy, and atomic diffusion coefficients of the nanoparticles were calculated at each temperature. These properties were used to characterize the physical phases and thus determine the melting transitions of the nanoparticles. The melting temperatures predicted by the various properties are consistent with one another and show that the melting temperature increases with particle size, approaching the bulk limit for the largest particle. A size dependence of melting points has been observed in experimental and theoretical studies of atomic nanoparticles, and this is a further demonstration of the effect for large nanoparticles of complex molecular materials.     

Characterization of gas-expanded liquid-deposited gold nanoparticle films on substrates of varying surface energy

Dodecanethiol-stabilized gold nanoparticles (AuNPs) were deposited via a gas-expanded liquid (GXL) technique utilizing CO(2)-expanded hexane onto substrates of different surface energy. The different surface energies were achieved by coating silicon (100) substrates with various organic self-assembled monolayers (SAMs). Following the deposition of AuNP films, the films were characterized to determine the effect of substrate surface energy on nanoparticle film deposition and growth. Interestingly, the critical surface tension of a given substrate does not directly describe nanoparticle film morphology. However, the results in this study indicate a shift between layer-by-layer and island film growth based on the critical surface tension of the capping ligand. Additionally, the fraction of surface area covered by the AuNP film decreases as the oleophobic nature of the surfaces increases. On the basis of this information, the potential exists to engineer nanoparticle films with desired morphologies and characteristics.     

Silica-void-gold nanoparticles: temporally stable surface-enhanced Raman scattering substrates

Reproducible detection of a target molecule is demonstrated using temporally stable solution-phase silica-void-gold nanoparticles and surface-enhanced Raman scattering (SERS). These composite nanostructures are homogeneous (diameter = 45 +/- 4 nm) and entrap single 13 nm gold nanoparticle cores inside porous silica membranes which prevent electromagnetic coupling and aggregation between adjacent nanoparticles. The optical properties of the gold nanoparticle cores and structural changes of the composite nanostructures are characterized using extinction spectroscopy and transmission electron microscopy, respectively, and both techniques are used to monitor the formation of the silica membrane. The resulting nanostructures exhibit temporally stable optical properties in the presence of salt and 2-naphthalenethiol. Similar SERS spectral features are observed when 2-naphthalenethiol is incubated with both bare and membrane-encapsulated gold nanoparticles. Disappearance of the S-H Raman vibrational band centered at 2566 cm(-1) with the composite nanoparticles indicates that the target molecule is binding directly to the metal surface. Furthermore, these nanostructures exhibit reproducible SERS signals for at least a 2 h period. This first demonstration of utilizing solution-phase silica-void-gold nanoparticles as reproducible SERS substrates will allow for future fundamental studies in understanding the mechanisms of SERS using solution-phase nanostructures as well as for applications that involve the direct and reproducible detection of biological and environmental molecules.     

Stimuli induced structural changes of gold nanoparticle assemblies having sequential alternating amphiphilic peptides at the surface

Gold nanoparticles having sequential alternating amphiphilic peptide chains, Phe-(Leu-Glu)8, on the surface have been prepared. We describe structural control of the amphiphilic peptide coated gold nanoparticle assembly by a conformational transition of the surface peptides. Under the acidic condition, the conformation of the surface amphiphilic peptide was converted to a beta-sheet structure from an aggregated alpha-helix by incubation. Under this condition, the amphiphilic peptide coated gold nanoparticles formed a nanosheet assembly. The plasmon absorption maximum of the gold nanoparticles shifted to a shorter wavelength with the formation of the beta-sheet assembly of the surface peptide. This suggests that the structure of the peptide coated gold nanoparticle assembly could be controlled by the conformational transition of the surface peptide. Furthermore, the core gold nanoparticle could be fixed in the beta-sheet assembly in the state that stood alone. This system may be useful for novel molecular devices that exhibit quantized properties.