Robust multilayer thin films containing cationic thiol-functionalized gold nanorods for tunable plasmonic properties

Gold nanorods have great potential in a variety of applications because of their unique physical properties. In this article, we present the layer-by-layer (LbL) assembly of thin films containing positively charged gold nanorods that are covalently functionalized by cationic thiol molecules. The cationic gold nanorods are uniformly distributed in ultrathin nanocomposite LbL thin films. We studied the collective surface plasmon resonance coupling in the LbL films via UV-visible spectroscopy and evaluated their application in the surface-enhanced Raman scattering detection of rhodamine 6G probe molecules. Furthermore, we successfully manufactured freestanding nanoscale thin films containing multilayers of gold nanorods with a total thickness of less than 50 nm. The surface morphology and their optical and mechanical properties were systematically investigated, and the polycationic gold nanorods were found to play an important role in manipulating the properties of the nanocomposite thin films. Our findings reveal that such nanorods are excellent building blocks for constructing functional LbL films with tunable plasmonic behavior and robust mechanical properties.     

Assembly and Characterization of Rare-earth-containing Polyoxometalate [Eu （P2Mo17O61）2]^17- and Poly（allylamine hydrochloride） Multilayer Films

The ultrathin multilayer films of rare-earth-containing polyoxometalate cluster K17[Eu(P2Mo17O61)2](EuPMo) and poly(allylamine hydrochloride) (PAH) have been prepared by the Layer-by-Layer(LbL) selfassembly method. The photoluminescent behavior of the films investigated at room temperature shows the Eu^3 characteristic emission pattern of ^5Do→^7FJ(J=1—4). The occurrence of the photoluminescent activity confirms the potential of creating luminescent multilayer films with polyoxometalates (POMs).     

Preparation and characterization of the nanoporous ultrathin multilayer films based on molybdenum polyoxometalate (Mo38)n

Ultrathin multilayer films of the wheel-shaped molybdenum polyoxometalate cluster (Mo₃₈)_n and poly(allylamine hydrochloride)(PAH) have been prepared by the layer-by-layer (LbL) self-assembly method. The ((Mo₃₈)_n/PAH)_m multilayer films have been characterized by X-ray photoelectron spectra (XPS) and atomic force microscopy (AFM). UV-VIS measurements reveal regular film growth with each (Mo₃₈)_n adsorption. The electrochemistry behavior of the film at room temperature was investigated.     

聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

层-层自组装构建固相可降解基因传递体系的研究

近年来,随着人类对基因研究的深入,基因治疗作为一种新的手段,受到人们的广泛重视．在组织工程材料、介入医用材料和医用植入体的应用中,与传统的溶液给药方式不同,基因技术需要一种可直接作用于材料表面贴壁细胞的长效、高转染固相基因传递体系．目前,国内外研究者将蛋白质药     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Self-assembled graphene/azo polyelectrolyte multilayer film and its application in electrochemical energy storage device

Graphene/azo polyelectrolyte multilayer films were fabricated through electrostatic layer-by-layer (LbL) self-assembly, and their performance as electrochemical capacitor electrode was investigated. Cationic azo polyelectrolyte (QP4VP-co-PCN) was synthesized through radical polymerization, postpolymerization azo coupling reaction, and quaternization. Negatively charged graphene nanosheets were prepared by a chemically modified method. The LbL films were obtained by alternately dipping a piece of the pretreated substrates in the QP4VP-co-PCN and nanosheet solutions. The processes were repeated until the films with required numbers of bilayers were obtained. The self-assembly and multilayer surface morphology were characterized by UV-vis spectroscopy, AFM, SEM, and TEM. The performance of the LbL films as electrochemical capacitor electrode was estimated using cyclic voltammetry. Results show that the graphene nanosheets are densely packed in the multilayers and form random graphene network. The azo polyelectrolyte cohesively interacts with the nanosheets in the multilayer structure, which prevents agglomeration of graphene nanosheets. The sheet resistance of the LbL films decreases with the increase of the layer numbers and reaches the stationary value of 1.0 × 10(6) Ω/square for the film with 15 bilayers. At a scanning rate of 50 mV/s, the LbL film with 9 bilayers shows a gravimetric specific capacitance of 49 F/g in 1.0 M Na(2)SO(4) solution. The LbL films developed in this work could be a promising type of the electrode materials for electric energy storage devices.     

Layer—by—layer Multilaryer Films Self—assembled from a Rare—earth—containing Poly—oxometalate,Na9[Eu（W5O18）2] and Poly （allylamine hydrochloride） and Their Photoluminescent Properties

Ultrathin multilayer films of a rare-earth-containing polyoxometalate Na9[Eu(W5O18)2](EW) and poly (allymamine hydrochloride)(PAH) have been prepared by layer-by-layer self-assembly from dilute aqueous solution.The fabrication process of the EW/PAH multilaryer films was followed by UV-vis spectroscopy and ellipsometry,which show that the deposition process is linear and highly reproducible from layer to layer.An average EW/PAH bilayer thickness of ca.2.1nm was determined by ellipsometry.In addition,the scanning electron microscopy(SEM) image of the EW/PAH film indicates that the film surface is relatively uniform and smooth.The photoluminescent properties of these films were also investigated by fluorescence spectroscopy.     

Homogeneous, competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte coated latex particles

This study reports a homogeneous and competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte (Au(NP)/PE) coated latex particles prepared by the layer-by-layer (LbL) technique. First, the resonant energy transfer from a layer of fluorescent PEs to Au(NP) in LbL assembled films on planar substrates was investigated. The quenching efficiency (QE) for the planar films depended on the cube of the distance between the two layers. A QE of 50% was achieved at a distance of ca. 15 nm, indicating that the Au(NP)/PE system is suitable for detecting binding/release events for antibodies. A homogeneous, competitive binding immunoassay for biotin was designed based on Au(NP)/PE-coated polystyrene particles of 488 nm diameter as quenching agents for a fluorescein isothiocyanate labeled anti-biotin immunoglobulin (FITC-anti-biotin IgG). Biotin molecules were localized on the Au(NP)/PE-coated latexes by depositing a layer of biotinylated poly(allylamine hydrochloride) (B-PAH), and FITC-anti-biotin IgGs were subsequently bound to the particles through interaction with the biotin on B-PAH. Transmission electron microscopy and quartz crystal microgravimetry confirmed the multilayer formation on latex particles and planar gold surfaces, respectively. The biotin-functionalized Au(NP)/PE-coated latexes terminated by FITC-anti-biotin IgG exhibited a dynamic sensing range of 1-50 nmol. These results indicate that Au(NP)/PE-coated latexes can be readily used as dynamic range tunable sensors.     

UV-light and visible-light photochromism of inorganic–organic multilayer films based on polyoxometalate and poly(acrylamide)

Novel UV-light and visible-light photochromic inorganic–organic multilayers composed of polyoxometalates (phosphomolybdic acid (PMoA)) and poly(acrylamide) (PAM) were prepared by the layer-by-layer (LbL) self-assembly method. The grown process, composition, surface topography, and photochromic properties and mechanism of the multilayer films were investigated by ultraviolet–visible (UV–vis) spectra, Fourier transform infrared spectra (FT-IR), atomic force microscopy (AFM), electron resonance spectra (ESR), and X-ray photoelectron spectra (XPS). Irradiation with UV-light or visible-light, the transparent films changed from colorless to blue and showed reversible photochromism. PMoA/PAM LbL films had higher photochromic efficiency under UV-light irradiation than visible-light irradiation. The bleaching process occurred when the films were in contact with O₂ in the dark or heated in air. The photochromic process of PMoA/PAM LbL film was in accordance with radical mechanism.     

Effect of the layer-by-layer (LbL) deposition method on the surface morphology and wetting behavior of hydrophobically modified PEO and PAA LbL films

We demonstrate that the surface morphology and surface-wetting behavior of layer-by-layer (LbL) films can be controlled using different deposition methods. Multilayer films based upon hydrogen-bonding interactions between hydrophobically modified poly(ethylene oxide) (HM-PEO) and poly(acrylic acid) (PAA) have been prepared using the dip- and spin-assisted LbL methods. A three-dimensional surface structure in the dip-assisted multilayer films appeared above a critical number of layer pairs owing to the formation of micelles of HM-PEO in its aqueous dipping solution. In the case of spin-assisted HM-PEO/PAA multilayer films, no such surface morphology development was observed, regardless of the layer pair number, owing to the limited rearrangement and aggregation of HM-PEO micelles during spin deposition. The contrasting surface morphologies of the dip- and spin-assisted LbL films have a remarkable effect on the wetting behavior of water droplets. The water contact angle of the dip-assisted HM-PEO/PAA LbL films reaches a maximum at an intermediate layer pair number, coinciding with the critical number of layer pairs for surface morphology development, and then decreases rapidly as the surface structure is evolved and amplified. In contrast, spin-assisted HM-PEO/PAA LbL films yield a nearly constant water contact angle due to the surface chemical composition and roughness that is uniform independent of layer pair number. We also demonstrate that the multilayer samples prepared using both the dip- and spin-assisted LbL methods were easily peeled away from any type of substrate to yield free-standing films; spin-assisted LbL films appeared transparent, while dip-assisted LbL films were translucent.     

Polyelectrolyte blend multilayer films: surface morphology, wettability, and protein adsorption characteristics

We report the influence of polyelectrolyte (PE) multilayer films prepared from poly(styrene sulfonate)-poly(acrylic acid) (PSS-PAA) blends, deposited in alternation with poly(allylamine hydrochloride) (PAH), on film wettability and the adsorption behavior of the protein immunoglobulin G (IgG). Variations in the chemical composition of the PAH/(PSS-PAA) multilayer films, controlled by the PSS/PAA blend ratio in the dipping solutions, were used to systematically control film thickness, surface morphology, surface wettability, and IgG adsorption. Spectroscopic ellipsometry measurements indicate that increasing the PSS content in the blend solutions results in a systematic decrease in film thickness. Increasing the PSS content in the blend solutions also leads to a reduction in film surface roughness (as measured by atomic force microscopy), with a corresponding increase in surface hydrophobicity. Advancing contact angles (theta) range from 7 degrees for PAH/PAA films through to 53 degrees for PAH/PSS films. X-ray photoelectron spectroscopy measurements indicate that the increase in film hydrophobicity is due to an increase in PSS concentration at the film surface. In addition, the influence of added electrolyte in the PE solutions was investigated. Adsorption from PE solutions containing added salt favors PSS adsorption and results in more hydrophobic films. The amount of IgG adsorbed on the multilayer films systematically increased on films assembled from blends with increasing PSS content, suggesting strong interactions between PSS in the multilayer films and IgG. Hence, multilayer films prepared from blended PE solutions can be used to tune film thickness and composition, as well as wetting and protein adsorption characteristics.     

Fabrication of titanium dioxide and tungstophosphate nanocomposite films and their photocatalytic degradation for methyl orange

Photocatalytic multilayer films with different numbers of bilayers were prepared via an electrostatic layer-by-layer (LbL) self-assembly method. These LbL films were characterized by UV-vis spectroscopy, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Our results indicate that TiO(2) and tungstophosphate (H(3)PW(12)O(40), abbreviated as PW(12)) are successfully incorporated into the thin films. The as-prepared (TiO(2)/PW(12))(n) films show good photocatalytic performance toward methyl orange (MO) solution at pH 2.0, which is attributed to the synergistic effect between TiO(2) and PW(12). The effect of experimental parameters including number of bilayers, initial concentration, and pH value of dye solution were also studied. The multilayer films can be easily recovered and reused several times with little change of degradation, indicating that they are stable under the ultraviolet (UV) irradiation. The detection of active species displays that active holes (h(+)) play a dominant role for MO photodegradation in the TiO(2)/PW(12) system. Taking advantage of immobilization of catalysts on glass slides, the problem of recovery is solved. It is expected that photocatalytic multilayer films have substantial applications in industry.     

Spray-layer-by-layer assembly can more rapidly produce optical-quality multistack heterostructures

Automated spray-layer-by-layer (LbL) assembly was used to create highly reflective structurally colored thin films with high reflectance at near-UV light wavelengths. Reflectance peaks were tuned by fabricating alternating stacks of high (TiO(2) nanoparticles) and low (SiO(2) nanoparticles) refractive index materials using a non-quarter-wave design. Spray-assembled multilayer heterostructures fabricated with up to 840 individual polymer or nanoparticle deposition steps presented similar roughness and refractive index values compared to Bragg stacks obtained via immersion LbL assembly. Such complex multilayer heterostructures, however, could be fabricated in significantly shorter times; the time required to deposit a complete bilayer was only about 90 s, compared to 36 min for the immersion assembly of the same system. Optimization of the experimental parameters was performed to achieve uniform coatings and relatively smooth interfaces and surfaces. We observed that the spraying times of the nanoparticle and polymer solutions are the main parameters that determine the thickness, optical properties, and uniformity of the assembled films. Ellipsometry, atomic force microscopy (AFM), UV-vis spectroscopy, and transmission electron microscopy (TEM) were used to characterize the samples. The nanoparticle thin films were iridescent and presented relatively narrow peaks of high reflectance (～90%) at visible and near-UV wavelengths of light.     

Mussel-inspired chemistry for robust and surface-modifiable multilayer films

In this article, we report a bioinspired approach to preparing stable, functional multilayer films by the integration of mussel-inspired catechol oxidative chemistry into a layer-by-layer (LbL) assembly. A polyanion of poly(acrylic acid-g-dopamine) (PAA-dopamine) bearing catechol groups, a mussel adhesive protein-mimetic polymer, was synthesized as the building block for LbL assembly with poly(allylamine hydrochloride) (PAH). The oxidization of the incorporated catechol group under mild oxidative condition yields o-quinone, which exhibits high reactivity with amine and catechol, thus endowing the chemical covalence and retaining the assembled morphology of multilayer films. The cross-linked films showed excellent stability even in extremely acidic, basic, and highly concentrated aqueous salt solutions. The efficient chemical cross-linking allows for the production of intact free-standing films without using a sacrificial layer. Moreover, thiol-modified multilayer films with good stability were exploited by a combination of thiols-catechol addition and then oxidative cross-linking. The outstanding stability under harsh conditions and the facile functionalization of the PAA-dopamine/PAH multilayer films make them attractive for barriers, separation, and biomedical devices.     

Controlled loading and release of methylene blue from LbL polyurethane/poly(acrylic acid) film

The layer‐by‐layer (LbL) assembled multilayer films are widely used in the biomedical field for the controlled drug delivery. Here, multilayer films were assembled by LbL technique through alternating deposition of cationic polyurethane (PU) and poly(acrylic acid) (PAA) on glass slides. Methylene blue (MB) was used as a model drug to investigate the loading and release ability of the prepared multilayer film. The results showed that the loading rate and loading amount of MB were greatly influenced by pH value of the dye solution, and the release rate of MB was controlled both by ionic strength and pH value of immersing solution. The result also indicated that the film had a good reversibility of drug loading and release. It suggested that the PU/PAA multilayer film had potential applications in drug delivery and controlled release. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of solvent quality on the growth of polyelectrolyte multilayers

The effect of solvent conditions on the growth of polyelectrolyte (PE) multilayer films comprising poly(allylamine hydrochloride) (PAH) and poly(styrenesulfonate sodium salt) (PSS) on planar substrates was investigated by means of surface plasmon resonance spectroscopy (SPRS), quartz crystal microbalance (QCM), and atomic force microscopy techniques. The solvent quality was varied by the addition of ethanol to the PE solutions used for deposition of the layers, thus tuning the relative strength of electrostatic and secondary intermolecular and intramolecular interactions. Experiments were performed with PE solutions both without added electrolyte and containing 0.5 M NaCl. Decreasing the solvent quality (i.e., increasing the amount of ethanol in the adsorption solution) resulted in a marked increase of both the multilayer film thickness and mass loading, as determined from the SPRS spectra and QCM frequency shifts, respectively. With the solution composition approaching the precipitation point, thick PAH/PSS films were formed due to the screening of the electrostatic intra- and interchain repulsions and enhanced hydrophobic interactions between the polyelectrolyte chains. However, the films formed from water/ethanol mixtures remained stable upon subsequent exposure to water or salt-containing solutions: no significant film desorption occurred after up to 24 h of exposure to water or 0.5 M NaCl solutions. In addition, the effect of postdeposition exposure to water/ethanol mixtures was investigated for PE multilayers assembled from aqueous solutions. In this case, the optical thickness of the films was determined during exposure to water/ethanol mixtures, and instead of swelling, the polyelectrolyte films collapse to the surface as a result of the unfavorable segment-solvent interactions.     

Synthesis, characterization, and immobilization of Prussian blue-modified Au nanoparticles: application to electrocatalytic reduction of H2O2

Au nanoparticles modified with electroactive Prussian blue (PB) were for the first time synthesized by a simple chemical method. Transmission electronic microscopy showed that the average size of the Prussian blue shell/Au core hybrid composite (PB@Au) was about 50 nm, and Fourier transform IR, UV-vis spectra, and cyclic voltammetry confirmed the existence of PB on the surface of Au nanoparticles. Using the LbL technique, multilayer thin films of PB@Au nanoparticles were prepared by the alternate adsorption of oppositely charged linear polyelectrolyte poly(allylamine hydrochloride) (PAH) onto ITO glass for the construction of a hydrogen peroxide sensor. The novel multilayer films were characterized by SEM, cyclic voltammetry, and UV-visible absorption spectroscopy. The {PAH/PB@Au}n multilayer-modified electrode showed a well-defined pair of redox peaks and dramatic catalytic activity toward the reduction of hydrogen peroxide.     

The effect of support material and conditioning on wettability of PAH/PSS multilayer films

An efficient method for characterizing wetting properties of heterogeneous surfaces produced by sequential adsorption of polyelectrolytes was developed. Three types of polyelectrolytes were used: polyallylamine hydrochloride (PAH), polyethyleneimine (PEI), both of a cationic type, and polysodium 4-styrenesulfonate (PSS), of an anionic type. Multilayer films were prepared by 'layer-by-layer' (LbL) deposition technique. Natural ruby mica, glass, titanium foil and silicon wafers were used as the support material for PE films. Wetting of polyelectrolyte films was determined experimentally by contact angle measurements, using technique of direct image analysis of shape of sessile drops. Periodic oscillations in contact angle values were observed for multilayers terminated by polycation and polyanion, respectively, and the variations in contact angle values strongly depended on the conditions of adsorption and multilayer treatment after deposition. Therefore, the influence of ionic strength of polyelectrolyte solution used for deposition on wetting of multilayer films was considered and also the effect of conditioning in different environments was investigated. It is usually assumed that film properties and stability strongly depend on the first layer which is used to anchor a multilayer at the surface of support material. To investigate influence of the first layer, PAH/PSS films were compared with more complex ones having PEI as the first layer with a sequence of PSS/PAH deposited on top of it.     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.