Fluorometric sensing of alkali metal and alkaline earth metal cations by novel photosensitive monoazacryptand derivatives in aqueous micellar solutions

Novel monoazacryptand-type fluorescent chemosensors, (derived from an 18-crown-6) and (derived from a 15-crown-5) both with a pyrene ring as their photoresponsive moiety, were synthesized. Their fluorescence properties for alkali metal and alkaline earth metal cations in water were then examined. The detection of metal cations was accomplished by a change in the fluorescence intensity of the host compounds, based on a photoinduced electron transfer (PET) mechanism. In aqueous solution, showed little fluorescence upon the addition of Ba2+ because of the very weak complexation with Ba2+, but the presence of micelles of polyoxyethylene(10) isooctylphenyl ether (Triton X-100) enabled to show highly sensitive and selective Ba2+ detection among alkali metal and alkaline earth metal cations. With respect to the selective fluorescent detection of important metal cations (Na+, K+, Mg2+, Ca2+) relevant to living organisms, was found to detect K+ with high selectivity in aqueous micellar solutions of polyoxyethylene(20) sorbitan monostearate (Tween-60). The selectivity for metal cations was mainly dependent on the goodness of fit of the host cavity and the metal cation size. In the presence of anionic surfactants, detected alkaline earth metal cations more effectively than alkali metal cations.     

A triethylenetetramine bearing anthracene and benzophenone as a fluorescent molecular logic gate with either-or switchable dual logic functions

Fluorescence behaviors of a triethylenetetramine bearing anthracene (AN) and benzophenone (BP) fragments at the respective ends, L1, have been studied in water, where effects of pH (H+) and metal cations on the emission properties have been studied in detail. L1 behaves as a fluorescent molecular logic gate driven by H+ (Input1) and metal cations (Input2) as input chemicals. The most notable feature of L1 is that this molecule expresses the "either-or" switchable dual logic functions. Operation of L1 with Cu2+ as Input2 expresses the INHIBIT logic function, where a strong AN fluorescence appears only at pH 4 (with H+) without Cu2+ [Input1(1)-Input2(0)]. In contrast, operations of L1 with all other metal cations as Input2 express the TRANSFER logic function, where the presence of H+ allows strong AN fluorescence regardless of whether the metal cation exists or not [Input1(1)-Input2(0); Input1(1)-Input2(1)]. These emission switching behaviors of L1 are driven by the difference in the coordination stability between L1 and metal cations and the photoinduced intramolecular electron and energy transfer processes: (i) a pH-induced electron transfer from unprotonated nitrogen atoms of the polyamine chain to the photoexcited AN [ELT(N-->AN*)]; (ii) a pH- and metal coordination-induced electron transfer from the photoexcited AN to the ground-state BP [ELT(AN*-->BP)]; and (iii) a Cu2+ coordination-induced energy transfer from the photoexcited AN to Cu2+ [ENT(AN*-->Cu2+)].     

香豆素/Betti碱主体合成及其对铷、钡离子的选择性响应(英文)

合成了一个新型香豆素/Betti碱主体化合物1,并对其进行了结构表征。在乙腈/水溶液中进行主体1和碱金属、碱土金属相关离子(Li+,Na+,K+,Rb+,Cs+,Be2+,Mg2+,Ca2+,Sr2+,Ba2+)的相互作用研究时,发现仅Rb+,Ba2+离子对主体1有敏感的紫外光谱及荧光光谱响应,而其它的碱金属、碱土金属离子无敏感性光响应。紫外光谱显示,Rb+,Ba2+离子使主体1产生明显的红移(ε=4.66×102L·(mol·cm)-1,Δ=91nm),肉眼可观察到明显的由浅黄向橙红色的颜色变化,并使主体1的荧光光谱发生一定程度的猝灭。     

Modeling metal cation-phosphate interactions in nucleic acids in the gas phase via alkali metal cation-triethyl phosphate complexes

Threshold collision-induced dissociation techniques are employed to determine the bond dissociation energies (BDEs) of complexes of alkali metal cations, Na+, K+, Rb+, and Cs+, to triethyl phosphate (TEP). The primary and lowest energy dissociation pathway in all cases is the endothermic loss of the neutral TEP ligand. Theoretical electronic structure calculations at the B3LYP/6-311+G(2d,2p)//B3LYP/6-31G* level of theory are used to determine the structures, molecular parameters, and theoretical estimates for the BDEs of these complexes. For the complexes to Rb+ and Cs+, theoretical calculations were performed using hybrid basis sets in which the effective core potentials and valence basis sets of Hay and Wadt were used to describe the alkali metal cation, while the standard basis sets were used for all other atoms. The agreement between theory and experiment is excellent for the complexes to Na+ and K+ and is somewhat less satisfactory for the complexes to the heavier alkali metal cations, Rb+ and Cs+, where effective core potentials were used to describe the cation. The trends in the binding energies are examined. The binding of alkali metal cations to triethyl phosphate is compared with that to trimethylphosphate.     

碱金属阳离子对铁卟啉电催化CO2还原的影响

电催化CO2还原反应(CO2RR)可以有效地将温室气体转化为燃料或高附加值的化学品,从而缓解目前人类所面临的环境问题和能源危机,其中开发高效的电催化剂是至关重要的环节.近年来,研究者设计了多种高效的过渡金属配合物(包括Mn,Fe,Co,Ni和Cu)用作CO2RR分子电催化剂,并研究了其中的构效关系,例如,在分子内修饰质子给体取代基或电荷取代基可以显著提高CO2RR的催化效率.而电催化CO2RR的实际应用要在含有碱金属阳离子(例如,Na+和K+)的电解质水溶液中进行,但在已有报道中,很少有关于碱金属阳离子对CO2RR的影响.在众多的分子催化剂中,铁卟啉可以以较高的催化活性和选择性实现CO2到CO的转化.重要的是,卟啉环的刚性结构、稳定的配位环境及其骨架上官能团的易于修饰性成为研究CO2RR的构效关系的理想分子模型.基于以上考虑,本文以铁卟啉配合物为分子模型,研究了碱金属阳离子Na+和K+对电催化CO2RR的影响.首先,本文合成了简单的A4型铁卟啉化合物四-(3,4,5-三甲氧基苯基)-铁卟啉(FeP).并采用核磁共振、质谱分析、单晶衍射等表征手段对化合物进行了表征,在含有电解质的DMF溶液中测试其电催化CO2还原性能.实验结果表明,FeP可以实现高效的电催化CO2还原,催化电流随FeP的浓度呈线性增加,说明催化反应速率与催化剂浓度呈一级反应速率关系.较长时间的恒电压电解实验以及电解前后化合物的紫外-可见光谱证实了FeP的稳定性.通过气相色谱对产物进行分析,CO为主要产物,法拉第效率为95％.以上结果均表明,FeP是一个优良的分子催化剂.在此基础上,本文还发现加入Na+和K+均可以显著提升催化活性,而K+的加入使催化电流的提升更加显著,这可能是由于K+在溶液中的迁移速度比Na+更快.基于此实验现象,本文通过在FeP的第二配位层修饰1-氨-18-冠-6-醚官能团(N18C6),合成了N18C6-FeP化合物.结果表明,由于N18C6与Na+/K+之间的配位作用,使得N18C6-FeP比FeP具有更好的电催化CO2RR活性.研究表明,催化活性的提升归因于碱金属阳离子能够通过静电相互作用稳定Fe-CO2中间体.1H NMR谱证实了N18C6基团的确能够螯合碱金属阳离子.本文研究证明了碱金属阳离子对改善电催化CO2RR的积极作用,对于进一步深入了解CO2RR催化反应机理和未来合理的设计高效催化剂也都具有重要意义.     

Solvent Extraction of Alkali Metal Picrates by Lipophilic Cyclodextrin Derivatives

Lipophilic cyclodextrin (CD) derivatives were prepared to extract alkali metal cations from a water phase into an organic phase. The extraction equilibrium constant, K ex, was determined by the solvent extraction method using UV absorption spectroscopy. Hydroxyl groups at the carbons in the 2,6-positions of CD molecules were dipropylated to add the hydrophobicity for dissolving into organic solvents, and furthermore hydroxyl groups at the carbons in the 3-position of these derivatives were acylated as complexing sites with the alkali metal cations. These CD derivatives formed a 1 : 1 complex with alkali metal cations, except for the case of Li+, and transported the alkali metal cations from a water phase into a benzene phase. The initial concentrations of alkali metal cation and picrate anion in the water phase and that of the CD derivatives in the organic phase strongly influenced the extraction equilibrium. Extraction of the alkali metal cation by the derivative without acyl groups was not detected. K ex values of these CD derivatives are of the same order of magnitude as or larger than those of crown ethers. The order of the K ex values in all cases is Li+ < Na+ < K+ Rb+ Cs+, although these CD derivatives have no special selectivity for the alkali metal cations. The cation extraction mechanism was interpreted by an induced-fit mechanism.     

A calixarene based fluorescent Sr2+ and Ca2+ probe

A fluorescent probe, PyCalix, which has two pyrene moieties at the lower rim of a calix[4]arene fixed in the cone conformation was synthesized and its complexation behavior with alkali and alkaline earth cations was studied by fluorescence spectrometry. The compound showed intramolecular excimer emission at approximately 480 nm in the fluorescence spectra. Upon complexation with alkaline earth metal cations, a decrease of excimer emission was observed. The decrease of excimer emission was accompanied by an increase of monomer emission of pyrenes at 397 nm. The order of complexation constants of PyCalix with metal ions was Sr(+ approximately Ca2+ > Ba2+ > Mg2+ > K+ > Na+ > Cs+ for all reagents. PyCalix doped polyvinyl chloride (PVC) membrane was fabricated and our results showed that this membrane can be used for selective detection of Sr2+.     

Formation of metal complex ions from amino acid in the presence of Li+, Na+ and K+ by electrospray ionization: metal replacement of hydrogen in the ligands

Alkali metal cations easily form complexes with proteins in biological systems; understanding amino acid clusters with these cations can provide useful insight into their behaviors at the molecular level including diagnosis and therapy of related diseases. For the purpose of characterization of basic interaction between amino acids and alkali metal, each of the 20 naturally occurring amino acids were ionized in the presence of lithium, sodium and potassium cations by electrospray ionization, and the resulting product ions were analyzed. We focus our attention on the gas phase alkali metal ion-proton exchanged complexes in current study, specifically complexes with serine, threonine, asparagine and glutamine, which share characteristic pattern unlike other amino acids. All amino acids generated [M + H](+) and [M + Na](+) ions, where M stands for the neutral amino acid. Serine, threonine, asparagine and glutamine generated cluster ions of [nM - nH + (n + 1)Na](+) and [nM - (n - 1)H + (n - 1)Na + K](+) , where n = 1-7. While the (M - H + Li) and (M - H + K) species were not observed, the neutral (M - H + Na) species formed by proton-sodium cation exchange had a highly stable cyclic structure with ketone and amine ligand sites, suggesting that (M - H + Na) serves as a building block in cluster ion formation. Cluster ion intensity distributions of [nM - nH + (n + 1)Na](+) and [nM - (n - 1)H + (n - 1)Na + K](+) showed a magic number at n = 3 and 4, respectively. Extensive B3LYP-DFT quantum mechanical calculations were carried out to elucidate the geometry and energy of the cluster ions, and they provided a reasonable explanation for the stability and structure of the cluster ions.     

Non-covalent interactions of alkali metal cations with singly charged tryptic peptides

The complexes formed by alkali metal cations (Cat(+) = Li(+), Na(+), K(+), Rb(+)) and singly charged tryptic peptides were investigated by combining results from the low-energy collision-induced dissociation (CID) and ion mobility experiments with molecular dynamics and density functional theory calculations. The structure and reactivity of [M + H + Cat](2+) tryptic peptides is greatly influenced by charge repulsion as well as the ability of the peptide to solvate charge points. Charge separation between fragment ions occurs upon dissociation, i.e. b ions tend to be alkali metal cationised while y ions are protonated, suggesting the location of the cation towards the peptide N-terminus. The low-energy dissociation channels were found to be strongly dependant on the cation size. Complexes containing smaller cations (Li(+) or Na(+)) dissociate predominantly by sequence-specific cleavages, whereas the main process for complexes containing larger cations (Rb(+)) is cation expulsion and formation of [M + H](+). The obtained structural data might suggest a relationship between the peptide primary structure and the nature of the cation coordination shell. Peptides with a significant number of side chain carbonyl oxygens provide good charge solvation without the need for involving peptide bond carbonyl groups and thus forming a tight globular structure. However, due to the lack of the conformational flexibility which would allow effective solvation of both charges (the cation and the proton) peptides with seven or less amino acids are unable to form sufficiently abundant [M + H + Cat](2+) ion. Finally, the fact that [M + H + Cat](2+) peptides dissociate similarly as [M + H](+) (via sequence-specific cleavages, however, with the additional formation of alkali metal cationised b ions) offers a way for generating the low-energy CID spectra of 'singly charged' tryptic peptides.     

The indole side chain of tryptophan as a versatile pi-donor

Single-armed, 15- and 18-membered lariat ether receptor systems having indolylethyl side arms bind Na+ and K+ in the ring. The indole residue serves as a pi-donor to the ring-bound cation. Whether the five- or six-membered ring interacts most directly with Na+ or K+ depends on whether the sidearm is attached to indole's 3- or 5-position. This suggests that structural as well as electronic factors are important in pi-complexation of alkali metal cations.     

Visual sensing of Ca2+ ion via photoreaction of fluorenyl ester-armed cyclen

Fluorenyl ester-armed cyclen gave fluorenone and related decomposition compounds upon photoirradiation. The reaction was effectively suppressed by the formation of an octacoordinated Ca2+ complex while Na+ and other alkali/alkaline earth metal cations had little influence. Since the production efficiency of fluorescent fluorenone related well to the concentration of the Ca2+ ion, the photoreaction of this armed cyclen offered the naked-eye detection of Ca2+ ion in aqueous samples.     

碱金属离子对甘氨酸五肽气相解离过程的影响

为了获得更多的多肽结构信息,采用结构简单的甘氨酸五肽(简写为GGGGG或G5)作为模型,研究了碱金属离子(Li+、Na+、K+、Rb+)对甘氨酸五肽GGGGG气相解离过程的影响.将一定化学计量比的甘氨酸五肽分别和四种碱金属盐溶液混合后,静置10h,使反应达到平衡.电喷雾质谱结果表明,四种碱金属离子均可以在溶液中与甘氨酸五肽形成非共价复合物,其中主要组分为碱金属离子与G5配合比为1:1和2:1的非共价复合物.质谱碰撞诱导解离(CID)时的碰撞能量为25eV.气相碰撞诱导解离实验结果表明,在配合比为1:1的复合物中,其碎片化程度按照Li+、Na+、K+、Rb+的次序依次减小,Rb+的复合物碎裂过程中生成了不常见的c、z离子;在配合比为2:1的复合物中,其碎片化程度按照Li+、Na+、K+、Rb+的次序依次增大.与1:1的非共价复合物相比,Na+、K+、Rb+的2:1复合物的气相解离显得更加容易.除Li+外,两个碱金属离子对G5的活化能力明显较单个碱金属离子强,它们可以诱导多肽在更多位点断裂,生成更多类型的碎片离子.     

Experimental and theoretical investigation of alkali metal cation interactions with hydroxyl side-chain amino acids

Absolute bond dissociation energies of serine (Ser) and threonine (Thr) to alkali metal cations are determined experimentally by threshold collision-induced dissociation of M+AA complexes, where M+=Li+, Na+, and K+ and AA=Ser and Thr, with xenon in a guided ion beam tandem mass spectrometer. Experimental results show that the binding energies of both amino acids to the alkali metal cations are very similar to one another and follow the order of Li+>Na+>K+. Quantum chemical calculations at three different levels, B3LYP, B3P86, and MP2(full), using the 6-311+G(2d,2p) basis set with geometries and zero-point energies calculated at the B3LYP/6-311+G(d,p) level show good agreement with the experimental bond energies. Theoretical calculations show that all M+AA complexes have charge-solvated structures (nonzwitterionic) with [CO, N, O] tridentate coordination.     

Cation-controlled assembly of Na+-linked lacunary alpha-Keggin tungstosilicates

Two novel salts of lacunary tungstosilicates with guanidinium and alkali metal cations, (CH6N3)7Na[SiW11O39].(CH3)2CO.8H2O (1) and (CH6N3)K6Na[SiW11O39].11.5H2O (2), have been synthesized and their crystal structures have been determined by synchrotron X-ray diffraction. In both crystals, the Na+ cations link the lacunary Keggin-type tungstosilicate anions into linear structures. The neighboring [SiW11O39]8- anions are related by two-fold screw and translational operations in compounds 1 and 2, respectively. Second harmonic generation was observed for compound 1.     

阳离子－π体系相互作用的理论研究 3: 碱金属阳离子－苯 复合物体系的量子 化学研究

运用abinitioHartree-Fock从头算,微扰MP2和密度泛函B3LYP方法在不同的基组水平上对碱金属阳离子－苯复合物体系的可能构型进行了自由优化,得到了复合物的能量最低构型为碱金属阳离子位于苯环平面的正上方,频率计算结果表明该结构为稳定结构.复合物的键长、原子净电荷、分子轨道、前沿轨道能量、Mullicken键级等都表明,碱金属阳离子和苯环碳原子之间的作用包含p-π作用方式,碱金属阳离子与苯结合时电子从苯环向碱金属阳离子转移,形成电荷转移复合物.它们之间的结合方式和氢键的结合方式相似,但计算得到的热力学参数表明复合物中碱金属阳离子与苯之间的结合强度远远大于典型的氢键,尤其是锂离子－苯复合物的生成焓已和普通的化学键相当.复合物的红外特征振动频率位于200^-^1附近,对应于碱金属阳离子垂直于苯环平面的来回振动,同时形成复合物后,原来位于3200cm^-^1的苯的C--H振动红外活性消失。     

新型氮杂大环化合物的研究Ⅲ.取代不对称多齿氮杂大环化合物的合成、表征与配位性能

合成了四种以Nsp2 和Nsp3为配位原子的取代不对称多齿氮杂大环化合物 ,制备了它们与不同金属离子的配合物 ,通过元素分析和光谱表征 ,研究了配体的结构与其配位性能的关系 .以吡啶环为侧链功能基的配体L1和L2可根据其环大小选择性地识别Na+或K+离子 ,与过渡金属离子形成 1∶1型配合物 ,而与Hg2 +,Cd2 +等离子则形成1∶2型配合物 .大环配体L3与Co2 +和Na+离子形成的双核配合物中两个冠醚环和一个Na+离子形成夹心配位结构 .L5环中有两个配位中心 ,因而可同时与两个Ru2 +离子配位 .L1和L2 均表现出对不同金属离子良好的液膜传输性能和传输选择性     

基于硼二吡咯亚甲基类(BODIPY)衍生物的合成,光谱及汞离子识别(英文)

The synthesis and sensing properties of a new BODIPY derivative 1 are outlined. 1 shows fluorescence “turn-on” and colorimetric responses with high selectivity toward Hg²⁺ over the other metal cations. Coordination of Hg²⁺ influences the electronic properties of the receptor at meso-position and alter the efficiency of non-radiative decay, hence increase the fluorescence intensity and red shift the absorption spectrum.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

A new Schiff base system bearing two naphthalene groups as fluorescent chemodosimeter for Zn2+ ion and its logic gate behavior

1-((E)-(2-((2-nitrobenzyl)(2-((E)-(2-hydroxynaphthalen-1-yl)methyleneamino)ethyl)amino)ethylimino)methyl)naphthalen-2-ol (H(2)L), The new compound featuring two naphthalene units was synthesized and characterized. We find that H(2)L has high selectivity and sensitivity to detect Zn(2+) ion over other metal ions such as Na(+), Ag(+), Cd(2+), Co(2+), Cr(3+), Cu(2+), Hg(2+), Mn(2+), Ni(2+), Fe(3+), and the sensitivity is about 10(-7)M. The fluorescent changes of H(2)L upon the addition of cations Zn(2+) and triethylamine is utilized as an AND logic gate at the molecular level, using Zn(2+) and triethylamine as chemical inputs and the fluorescence intensity signal as output.     

A chemosensor showing discriminating fluorescent response for highly selective and nanomolar detection of Cu and Zn and its application in molecular logic gate

A fluorescent based receptor (4Z)-4-(4-diethylamino)-2-hydroxybenzylidene amino)-1,2dihydro-1,5-dimethyl-2-phenylpyrazol-3-one (receptor 3) was developed for the highly selective and sensitive detection of Cu²⁺ and Zn²⁺ in semi-aqueous system. The fluorescence of receptor 3 was enhanced and quenched, respectively, with the addition of Zn²⁺ and Cu²⁺ ions over other surveyed cations. The receptor formed host-guest complexes in 1:1 stoichiometry with the detection limit of 5 nM and 15 nM for Cu²⁺ and Zn²⁺ ions, respectively. Further, we have effectively utilized the two metal ions (Cu²⁺ and Zn²⁺) as chemical inputs for the manufacture of INHIBIT type logic gate at molecular level using the fluorescence responses of receptor 3 at 450 nm.