共查询到18条相似文献,搜索用时 515 毫秒
1.
为了适用于柔性变形、相对运动等复杂动边界问题,建立了并行环境下重叠和变形相结合的动态混合网格生成技术.通过计算区域分解以及分布式并行实现了重叠和变形技术的结合,其中重叠网格采用了并行化的隐式装配方法,并发展了两种并行化查询策略.变形网格则采用了并行化的径向基函数(RBF)插值方法.并行化动态网格生成方法大幅提高了动态网格生成效率,有利于处理大规模的动边界问题.在此基础上,发展了基于变形/重叠动态混合网格的流动/运动/控制一体化数值模拟方法,进一步改进了耦合模拟软件平台——HyperFLOW.典型应用算例证明了该动态混合网格技术及一体化算法的实用性. 相似文献
2.
3.
嵌套网格技术中的Collar网格和虚拟网格方法 总被引:3,自引:0,他引:3
针对嵌套网格技术中的结合部问题,提出了Collar网格和虚拟网格方法.用双曲型微分方程生成的处于结合部的有两个边界分别处于不同固定曲面上的Collar网格,在保证计算网格的生成方便快捷而且网格质量高的前提下,解决了为物体结合部的内外边界点提供有效插值单元的问题.虚拟网格为紧贴物面的面网格,它的作用是将物面边界条件传递给其它网格的边界面,而其本身不作流场计算.计算实践表明,将Collar网格和虚拟网格结合起来应用在嵌套网格技术中能保证几何外形不发生变化,有效地处理各种复杂组合体外形的结合部问题. 相似文献
4.
三维非结构网格自动生成 总被引:4,自引:0,他引:4
采用各向异性平面非结构网格生成技术对曲面的参数平面进行三角剖分,从而得到曲面的非结构网格,作为三维非结构网格的边界网格.应用推进面法生成网格内点,增量法将生成的内点逐点插入现有网格进行网格细化,得到三维计算域的Delaunay非结构网格.讨论了非结构网格质量优化方法.给出几个算例说明方法的应用. 相似文献
5.
6.
7.
8.
9.
10.
王瑞利 《工程物理研究院科技年报》2003,(1):426-426
对纯拉氏方法,格式的健壮性、精度和效率强烈地依赖于初始网格的生成。结构网格与非结构网格的联合技术,不仅可适应于复杂区域的网格生成,而且可根据实际问题的特殊性,在初始自适应的生成网格。本文在研究结构网格和非结构网格生成的基础上,研究了结构网格与非结构网格联合使用的自适应网格生成技术。首先是根据实际问题的特征,把整个计算区域划分成若干子区域,其次是把每个子区域分成若干子块,最后根据每个子块的特征生成网格,再把子块拼接起来。 相似文献
11.
Upender K. Kaul 《Journal of computational physics》2010,229(17):5966-5979
A new procedure for generating smooth uniformly clustered three-dimensional structured elliptic grids is presented here which formulates three-dimensional boundary constraints by extending the two-dimensional counterpart1 presented by the author earlier. This fully automatic procedure obviates the need for manual specification of decay parameters over the six bounding surfaces of a given volume grid. The procedure has been demonstrated here for the Mars Science Laboratory (MSL) geometries such as aeroshell and canopy, as well as the Inflatable Aerodynamic Decelerator (IAD) geometry and a 3D analytically defined geometry. The new procedure also enables generation of single-block grids for such geometries because the automatic boundary constraints permit the decay parameters to evolve as part of the solution to the elliptic grid system of equations. These decay parameters are no longer just constants, as specified in the conventional approach, but functions of generalized coordinate variables over a given bounding surface. Since these decay functions vary over a given boundary, orthogonal grids around any arbitrary simply-connected boundary can be clustered automatically without having to break up the boundaries and the corresponding interior or exterior domains into various blocks for grid generation. The new boundary constraints are not limited to the simply-connected regions only, but can also be formulated around multiply-connected and isolated regions in the interior. The proposed method is superior to other methods of grid generation such as algebraic and hyperbolic techniques in that the grids obtained here are C2 continuous, whereas simple elliptic smoothing of algebraic or hyperbolic grids to enforce C2 continuity destroys the grid clustering near the boundaries. 相似文献
12.
13.
讨论了用分层求解的思想来快速构造二维数值网格。把以往文献中针对于外场区域的解抛物型方程的方法推广到封闭的二维区域,并把分层求解的思想应用于更为复杂的用椭圆型方程构造网格的数值求解中,给出了一些闭域的网格构造图。 相似文献
14.
15.
基于声速分布,提出一种拉氏流体力学计算中大变形网格优化的数值技术.该方法不但可以优化网格的几何形状且可以提高拉氏流体计算的时间步长.介绍基于声速分布的网格松弛泛函、修正梯度流方程的推导、离散和求解方法,启动/终止网格优化过程的条件,及基于这种网格优化方法的ALE算法.给出Rayleigh-Taylor不稳定性问题等数值算例,用以证明该方法的有效性. 相似文献
16.
Z. Zong 《Journal of sound and vibration》2003,266(2):307-323
Differential quadrature (DQ) is a numerical technique which can produce highly accurate results by using a considerably small number of grid points. When it is applied to dynamic equations, however, DQ may exhibit dynamic numerical instability. The present paper analyzed the sources of dynamic numerical instability through a simple example, and the main finding is that dynamic stability is dominated by the grid points near and on boundaries. Based on this, we propose a variable order approach which is characterized by applying different DQ schemes to the grid points near boundaries and grid points far away from boundaries. Numerical examples of both linear and non-linear dynamic equations show that the variable order approach presented in this paper may greatly improve dynamic stability, producing convincing results. 相似文献
17.
二维非结构自适应多重网格的Euler方程解 总被引:1,自引:0,他引:1
将原来在结构网格中提出的AUSM+(Advection Upstream Splitting Method)格式,推广应用于二维非结构网格中。利用格林-高斯公式对控制体内的变量进行线性重构,获得空间二阶精度,并采用Barth型限制器以抑制数值解的振荡。为提高计算效率,采用了自适应多重网格法。在生成非结构网格时,采用了一种新颖的数据结构——数组链接表。最后给出了NACA0012翼型和带10%鼓包的管道流动的几个Euler方程的算例,并进行了分析比较。 相似文献
18.
结构型网格分块生成技术 总被引:6,自引:0,他引:6
构造了一种适用于模拟具有复杂几何特征的流动问题的结构型网格生成方法,该方法应用CAD技术中非均匀有理B样条(NURBS)曲面表达形式,根据给定物体的典型站位截面,首先对物体进行分片表面网格的构造与重构,同时根据物体几何特征及流场特性对绕流流场进行区域分解并构造其块边界,在此基础上再采用数值方法进行相应的分块网格生成,并给出了应用所建立的方法生成的几种天地往返运输系统流场网格. 相似文献