Effect of nanoparticle size on the extravasation and the photothrombic activity of meso(p-tetracarboxyphenyl)porphyrin

Particle size should be optimized to achieve targeted and extended drug delivery to the affected tissues. We describe here the effects of the mean particle size on the pharmacokinetics and photothrombic activity of meso-tetra(carboxyphenyl)porphyrin (TCPP), which is encapsulated into biodegradable nanoparticles based on poly(d,l-lactic acid). Four batches of nanoparticles with different mean sizes ranging from 121 to 343 nm, were prepared using the emulsification-diffusion technique. The extravasations of each TCPP-loaded nanoparticle formulation from blood vessels were measured, as well as the extent of photochemically induced vascular occlusion. These preclinical tests were carried out in the chorioallantoic membrane (CAM) of the chicken's embryo. Fluorescence microscopy showed that both the effective leakage of TCPP from the CAM blood vessels and its photothrombic efficiency were dependent on the size of the nanoparticle drug carrier. Indeed, the TCPP fluorescence contrast between the blood vessels and the surrounding tissue increased at the applied conditions, when the particle size decreased. This suggests that large nanoparticles are more rapidly eliminated from the bloodstream. In addition, after injection of a drug dose of 1mg/kg body weight and a drug-light application interval of 1 min, irradiation with a fluence of 10J/cm(2) showed that the extent of vascular damage gradually decreased when the particle size increased. The highest photothrombic efficiency was observed when using the TCPP-loaded nanoparticles batch with a mean diameter of 121 nm. Thus, in this range of applied conditions, for the treatment of for instance a disease like choroidal neovascularization (CNV) associated with age-related macular degeneration (AMD), these experiments suggest that the smallest nanoparticles may be considered as the optimal formulation since they exhibited the greatest extent of vascular thrombosis as well as the lowest extravasation.     

Preclinical evaluation of a novel water-soluble chlorin E6 derivative (BLC 1010) as photosensitizer for the closure of the neovessels

In the present study, photodynamic activity of a novel photosensitizer (PS), Chlorin e(6)-2.5 N-methyl-d-glucamine (BLC 1010), was evaluated using the chorioallantoic membrane (CAM) as an in vivo model. After intravenous (i.v.) injection of BLC 1010 into the CAM vasculature, the applicability of this drug for photodynamic therapy (PDT) was assessed in terms of fluorescence pharmacokinetics, i.e. leakage from the CAM vessels, and photothrombic activity. The influence of different PDT parameters including drug and light doses on the photodynamic activity of BLC 1010 has been investigated. It was found that, irrespective of drug dose, an identical continuous decrease in fluorescence contrast between the drug inside and outside the blood vessels was observed. The optimal treatment conditions leading to desired vascular damage were obtained by varying drug and light doses. Indeed, observable damage was achieved when irradiation was performed at light doses up to 5 J/cm(2) 1 min after i.v. injection of drug doses up to 0.5 mg/kg body weight(b.w.). However, when irradiation with light doses of more than 10 J/cm(2) was performed 1 min after injection of drug doses up to 2 mg/kg body weight, this led to occlusion of large blood vessels. It has been demonstrated that it is possible to obtain the desired vascular occlusion and stasis with BLC 1010 for different combinations of drug and/or light doses.     

Luminescent properties of dye-PMMA composite nanospheres

The luminescent properties of two types of dye-poly(methyl methacrylate) (PMMA) composite nanospheres were discussed and compared. Dye molecules (Ru(bpy)(3)Cl(2)) were combined with PMMA nanospheres in two strategies: embedding dye molecules during PMMA nanosphere formation (Em-PMMA NPs) and adsorbing dye molecules onto the surface of the produced PMMA nanospheres (Ad-PMMA NPs). It has been proved that the electrostatic interaction dominated the load of Ru(bpy)(3)(2+) on the PMMA matrix. The luminescence intensity of the Em-PMMA NPs was much higher than that of the Ad-PMMA NPs under same dye concentration due to different dye load distribution in two types of dye-PMMA composite nanospheres. Luminescence lifetime measurement of Ru(bpy)(3)(2+) in the Em-PMMA NPs (containing 2.20 × 10(3) Ru(bpy)(3)(2+) molecules per NP) indicates that ～60% of dye molecules loaded in inside of the PMMA matrix and ～40% located close to/on the surface of NPs. For the Ad-PMMA NPs containing same amount of dye as Em-PMMA Nps, most of dye molecules (～84%) were on the surface of NPs and only ～16% of them penetrated into the PMMA matrix. The luminescence of the Em-PMMA NPs had nearly seven fold enhancement and the excited-state lifetime had nearly five fold extension relative to a dye aqueous solution. The mechanism of luminescence enhancement was studied. The results indicate that the larger viscosity and weaker polarity of a PMMA matrix led to the luminescence enhancement of Ru(bpy)(3)(2+). These luminescent PMMA nanospheres with high stability, long lifetime and high brightness hold great the potential for being a novel biological label.     

Influence of the polymer structure over self‐assembly and thermo‐responsive properties: The case of PEG‐b‐PCL grafted copolymers via a combination of RAFT and ROP

During the last years, the field of drug delivery has experienced a growing interest toward the so‐called thermo‐responsive polymers: synthetic materials that, due to the specific hydrophilic–lipophilic balance of their repeating units, exhibit a lower critical solution temperature (LCST) in water associated to a characteristic coil–globule transition. In this work, thermo‐responsive amphiphilic block copolymers are synthesized via reversible addition‐fragmentation transfer (RAFT) polymerization starting from thermo‐responsive monomers and a hydrophobic biodegradable macromonomer, oligo(caprolactone)methacrylate (CL₃MA), produced via ring opening polymerization (ROP). The obtained copolymers exhibit an interesting self‐assembly behavior leading to nanoparticles (NPs) as long as temperature is kept below the LCST. Otherwise, once this value is overcome, the destabilization of the NPs causes the formation of hydrophobic superstructures that enhance the release of an entrapped lipophilic drug. This characteristic behavior has been systematically studied and related to the copolymer structure. In particular, the self‐assembly behavior as well as temperature‐triggered NP destabilization have been related to the relative length of the two blocks constituting the copolymers and to their hydrophilic–lipophilic balance (HLB). Finally, the efficacy of the thermo‐responsive triggered drug release has been tested in the case of Paclitaxel (PTX). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2919–2931     

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

Uniform silica nanoparticles encapsulating two-photon absorbing fluorescent dye

We have prepared uniform silica nanoparticles (NPs) doped with a two-photon absorbing zwitterionic hemicyanine dye by reverse microemulsion method. Obvious solvatochromism on the absorption spectra of dye-doped NPs indicates that solvents can partly penetrate into the silica matrix and then affect the ground and excited state of dye molecules. For dye-doped NP suspensions, both one-photon and two-photon excited fluorescence are much stronger and recorded at shorter wavelength compared to those of free dye solutions with comparative overall dye concentration. This behavior is possibly attributed to the restricted twisted intramolecular charge transfer (TICT), which reduces fluorescence quenching when dye molecules are trapped in the silica matrix. Images from two-photon laser scanning fluorescence microscopy demonstrate that the dye-doped silica NPs can be actively uptaken by Hela cells with low cytotoxicity.     

Fighting Aggregation‐Caused Quenching and Leakage of Dyes in Fluorescent Polymer Nanoparticles: Universal Role of Counterion

Dye‐loaded polymer nanoparticles (NPs) emerge as a powerful tool for bioimaging applications, owing to their exceptional brightness and controlled small size. However, aggregation‐caused quenching (ACQ) and leakage of dyes at high loading remain important challenges of these nanomaterials. The use of bulky hydrophobic counterions has been recently proposed as an effective approach to minimize ACQ and dye leakage, but the role of counterion structure is still poorly understood. Here, a systematic study based on ten counterions, ranging from small hydrophilic perchlorate up to large hydrophobic tetraphenylborate derivatives, reveals how counterion nature can control encapsulation and emission of a cationic dye (rhodamine B octadecyl ester) in NPs prepared by nanoprecipitation of a biodegradable polymer, poly‐lactide‐co‐glycolide (PLGA). We found that increase in counterion hydrophobicity enhances dye encapsulation efficiency and prevents dye adsorption at the particle surface. Cellular imaging studies revealed that ≥95 % encapsulation efficiency, achieved with most hydrophobic counterions (fluorinated tetraphenylborates), is absolutely required because non‐encapsulated dye species at the surface of NPs are the origin of dye leakage and strong fluorescence background in cells. The size of counterions is found to be essential to prevent ACQ, where the largest species, serving as effective spacer between dyes, provide the highest fluorescence quantum yield. Moreover, we found that the most hydrophobic counterions favor dye–dye coupling inside NPs, leading to ON/OFF fluorescence switching of single particles. By contrast, less hydrophobic counterions tend to disperse dyes in the polymer matrix favoring stable emission of NPs. The obtained structure‐property relationships validate the counterion‐based approach as a mature concept to fight ACQ and dye leakage in the development of advanced polymeric nanomaterials with controlled optical properties.     

Ultrasensitive Fluorescence Polarization Aptasensors Based on Exonuclease Signal Amplification and Polystyrene Nanoparticle Amplification

Here, we combine T7 exonuclease (T7 Exo) signal amplification and polystyrene nanoparticle (PS NP) amplification to develop novel fluorescence polarization (FP) aptasensors. The binding of a target/open aptamer hairpin complex or a target/single‐stranded aptamer complex to dye‐labeled DNA bound to PS NPs, or the self‐assembly of two aptamer subunits (one of them labeled with a dye) into a target/aptamer complex on PS NPs leads to the cyclic T7 Exo‐catalyzed digestion of the dye‐labeled DNA or the dye‐labeled aptamer subunit. This results in a substantial decrease in the FP value for the amplified sensing process. Our newly developed aptasensors exhibit a sensitivity five orders of magnitude higher than that of traditional homogeneous aptasensors and a high specificity for the target molecules. These distinct advantages of our proposed assay protocol make it a generic platform for the design of amplified aptasensors for ultrasensitive detection of various target molecules.     

Cofluorescence of dyes in nanoparticles from metal ion complexes with diketones

Nanoparticles (NPs) from diketonates of Al³⁺, Sc³⁺, In³⁺ and Ln³⁺ doped with dye molecules are synthesized. The appearance of sensitized fluorescence (cofluorescence) of dye molecules due to energy transfer from the ensemble of complexes forming NPs is revealed in aqueous solutions of these NPs. It is shown that the dye cofluorescence in NPs from Eu complexes occurs as a result of two distinct processes of energy transfer (ET) to dye molecules: from singlet levels of ligands and from Eu³⁺ ions. It is found that the efficiency of ET from Eu³⁺ ions to dyes in NPs from Eu(DBM)₃phen is one order of magnitude higher than the efficiency of ET from S₁-levels of ligands to dyes in NPs from Al complexes with the same ligands. It is shown that the excitation of dye molecules through ligands of NPs results in the enhancement of the intensity of their fluorescence by a factor of 1.5–2 orders of magnitude compared to the excitation of their own first band of absorption.     

Experimental and theoretical studies of the optimisation of fluorescence from near-infrared dye-doped silica nanoparticles

There is substantial interest in the development of near-infrared dye-doped nanoparticles (NPs) for a range of applications including immunocytochemistry, immunosorbent assays, flow cytometry, and DNA/protein microarray analysis. The main motivation for this work is the significant increase in NP fluorescence that may be obtained compared with a single dye label, for example Cy5. Dye-doped NPs were synthesised and a reduction in fluorescence as a function of dye concentration was correlated with the occurrence of homo-Förster resonance energy transfer (HFRET) in the NP. Using standard analytical expressions describing HFRET, we modelled the fluorescence of NPs as a function of dye loading. The results confirmed the occurrence of HFRET which arises from the small Stokes shift of near-infrared dyes and provided a simple method for predicting the optimum dye loading in NPs for maximum fluorescence. We used the inverse micelle method to prepare monodispersed silica NPs. The NPs were characterised using dynamic light scattering, UV spectroscopy, and transmission electron microscopy (TEM). The quantum efficiency of the dye inside the NPs, as a function of dye loading, was also determined. The fluorescent NPs were measured to be approximately 165 times brighter than the free dye, at an optimal loading of 2% (w/w). These experimental results were in good agreement with model predictions.

Open image in new window

Figure The change in nanoparticle fluorescence versus increased dye loading modelled using homo-Förster resonance energy transfer.

     

Aqueous reductive dechlorination of chlorinated ethylenes with tetrakis(4-carboxyphenyl)porphyrin cobalt

The catalytic dechlorination of chlorinated ethylenes by 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin cobalt ((TCPP)Co), a cobalt complex structurally similar to vitamin B12, was studied. It was found to have superior aqueous-phase dechlorination activity on chlorinated ethylenes (CEs) relative to vitamin B12. Bimolecular rate constants for the degradation of CEs by (TCPP)Co of 250, 24, 0.24, and 1.5 M(-1) s(-1) were found for perchloroethylene (PCE), trichloroethylene (TCE), cis-dichloroethylene (cDCE), and trans-dichloroethylene (tDCE), respectively. Through kinetic analysis, the rate laws for PCE and TCE were determined to be first order in substrate and catalyst, and PCE degradation was shown to be sensitive to the concentration of the titanium citrate bulk reductant and pH. The importance of the Co(I) oxidation state on dehalogenation was studied with UV-vis absorbance spectroscopy, a variety of reducing agents, and cyclic voltammetry. Evidence of chlorovinyl complexes as potential catalytic cycle intermediates was obtained through the preparation of (TPP)Co(trans-C2H2Cl) and the observation of (TPP)Co(C2HCl2) and (TCPP)Co(C2HCl2) by mass spectrometry. The X-ray crystal structure of (TPP)Co(trans-C2H2Cl) is reported.     

On the Hopping Efficiency of Nanoparticles in the Electron Transfer across Self‐Assembled Monolayers

Redox reactions of solvated molecular species at gold‐electrode surfaces modified by electrochemically inactive self‐assembled molecular monolayers (SAMs) are found to be activated by introducing Au nanoparticles (NPs) covalently bound to the SAM to form a reactive Au–alkanedithiol–NP–molecule hybrid entity. The NP appears to relay long‐range electron transfer (ET) so that the rate of the redox reaction may be as efficient as directly on a bare Au electrode, even though the ET distance is increased by several nanometers. In this study, we have employed a fast redox reaction of surface‐confined 6‐(ferrocenyl) hexanethiol molecules and NPs of Au, Pt and Pd to address the dependence of the rate of ET through the hybrid on the particular NP metal. Cyclic voltammograms show an increasing difference in the peak‐to‐peak separation for NPs in the order Au<Pt<Pd, especially when the length of the alkanedithiol increases from octanedithiol to decanedithiol. The corresponding apparent rate constants, k_app, for decanedithiol are 1170, 360 and 14 s^?1 for NPs of Au, Pt and Pd, respectively, indicating that the efficiency of NP mediation of the ET clearly depends on the nature of the NP. Based on a preliminary analysis rooted in interfacial electrochemical ET theory, combined with a simplified two‐step view of the NP coupling to the electrode and the molecule, this observation is referred to the density of electronic states of the NPs, reflected in a broadening of the molecular electron/NP bridge group levels and energy‐gap differences between the Fermi levels of the different metals.     

Fluorescence resonance energy transfer in CdSe/ZnS-DNA conjugates: probing hybridization and DNA cleavage

Nucleic-acid-functionalized CdSe/ZnS quantum dots (QDs) were hybridized with the complementary Texas-Red-functionalized nucleic acid. The hybridization was monitored by following the fluorescence resonance energy transfer from the QDs to the dye units. Treatment of the QD/dye DNA duplex structure with DNase I resulted in the cleavage of the DNA and the recovery of the fluorescence properties of the CdSe/ZnS QDs. The luminescence properties of the QDs were, however, only partially recovered due to the nonspecific adsorption of the dye onto the QDs. Similarly, nucleic-acid-functionalized Au nanoparticles (Au NPs) were hybridized with the complementary Texas-Red-labeled nucleic acid. The hybridization was followed by the fluorescence quenching of the dye by the Au NPs. Treatment of the Au NP/dye DNA duplex with DNase I resulted in the cleavage of the DNA and the partial recovery of the dye fluorescence. The incomplete recovery of the dye fluorescence originated from the nonspecific binding of the dye units to the Au NPs. The nonspecific binding of the dye to the CdSe/ZnS QDs and the Au NPs is attributed to nonprotected surface vacancies in the two systems.     

Structure and mechanism of the deposition of multilayers of polyelectrolytes and nanoparticles

MD simulation of the layer-by-layer assembly of polyelectrolytes (PEs) and nanoparticles (NPs) revealed that the assembly process is electrostatically driven with alternating charge reversal and an overcompensation mechanism. Layers were observed to grow in the lateral direction as well as in a direction normal to the surface. Weakly adsorbed PE molecules were observed to desorb from the flat and NP surfaces. Those molecules are attracted by suspended NPs in solution. PE molecules do not only pull NPs toward the surface but bridge NPs both in solution and on the surface, forming agglomerates and islands. The first double layer differs in structure from the second double layer as a result of strong adsorption of the PE molecules to the rigid surface.     

Calcium Phosphate‐Reinforced Photosensitizer‐Loaded Polymer Nanoparticles for Photodynamic Therapy

Calcium phosphate‐reinforced photosensitizer‐loaded polymer nanoparticles have been developed for photodynamic therapy. Chlorin e6 (Ce6)‐loaded core–shell–corona polymer micelles of poly(ethylene glycol)‐b‐poly(L ‐aspartic acid)‐b‐poly(L ‐phenylalanine) ( PEG-PAsp-PPhe ) were employed as template nanoparticles for mineralization with calcium phosphate (CaP). CaP deposition was performed by the electrostatic localization of calcium ions at the anionic PAsp middle shells and the subsequent addition of phosphate anions. CaP‐reinforced nanoparticles exhibited enhanced stability. The CaP mineral layer effectively inhibited Ce6 release from the Ce6‐loaded mineralized nanoparticles (Ce6‐NP‐CaP) at physiological pH value. At an acidic endosomal pH value of 5.0, Ce6 release was enhanced, owing to rapid dissolution of the CaP minerals. Upon irradiation of Ce6‐NP‐CaP‐treated MCF‐7 breast‐tumor cells, the cell viability dramatically decreased with increasing irradiation time. The phototoxicity of Ce6‐NP‐CaP was much higher than that of free Ce6. Non‐invasive optical‐imaging results indicated that Ce6‐NP‐CaP exhibited enhanced tumor specificity compared with free Ce6 and Ce6‐loaded non‐mineralized polymer nanoparticles (Ce6‐NP).     

Construction of nanoparticle superstructures on the basis of host-guest interaction to achieve performance integration and modulation

Creation of nanoparticle (NP) architectures via a self-assembly strategy is the current means to integrate and/or modulate the functionalities of NPs. In this paper, we demonstrate the capability for constructing NP spherical superstructures through the specific interaction between host and guest molecules, for instance the model system of α-cyclodextrin (α-CD) and oleic acid (OA), which are decorated on two different NPs beforehand. Subsequently, the OA-decorated hydrophobic NPs are dispersed in hexane, whereas the α-CD-decorated NPs are dispersed in water. The blending of these two immiscible solutions produces NP binary superstructures because of the multiple linkages between the α-CD- and OA-decorated NPs. Control experiments indicate that the self-assembly of NPs occurs either at the hexane/water interface to form hybrid films or in the aqueous phase to generate spherical architectures, which strongly depends on the amount and the size of α-CD-decorated NPs. The high ratio and small size of the α-CD-decorated NPs facilitate the formation of spherical architectures. Competitive experiments with the addition of host α-CD and guest sodium oleate clearly confirm that the main driving force for the NP co-assembly is the specific interaction between α-CD and OA. In addition, the flexible decoration of α-CD and OA on the NPs makes the current strategy generally applicable for a variety of NPs, such as the superstructures of Au/Fe(3)O(4), Pt/Fe(3)O(4), and Au/NaYF(4):Yb,Tm, which is expected to promote the further application of NPs in environmental and biological sciences.     

Bulky Barbiturates as Non-Toxic Ionic Dye Insulators for Enhanced Emission in Polymeric Nanoparticles

Bulky hydrophobic counterions (weakly coordinating anions) can insulate ionic dyes against aggregation-caused quenching (ACQ) and enable preparation of highly fluorescent dye-loaded nanoparticles (NPs) for bioimaging, biosensing and light harvesting. Here, we introduce a family of hydrophobic anions based on fluorinated C-acyl barbiturates with delocalized negative charge and bulky non-polar groups. Similarly to fluorinated tetraphenylborates, these barbiturates prevent ACQ of cationic dye alkyl rhodamine B inside polymer NPs made of biodegradable poly(lactic-co-glycolic acid) (PLGA). Their efficiency to prevent ACQ increases for analogues with higher acidity and bulkiness. Their structure controls dye-dye communication, yielding bright NPs with on/off switching or stable emission. They enhance dye encapsulation inside NPs, allowing intracellular imaging without dye leakage. Compared to fluorinated tetraphenylborates known as cytotoxic transmembrane ion transporters, the barbiturates display a significantly lower cytotoxicity. These chemically available and versatile barbiturate derivatives are promising counterion scaffolds for preparation of bright non-toxic fluorescent nanomaterials.     

Photoselective excited state dynamics in ZnO-Au nanocomposites and their implications in photocatalysis and dye-sensitized solar cells

Improving the performance of photoactive solid-state devices begins with systematic studies of the metal-semiconductor nanocomposites (NCs) upon which such devices are based. Here, we report the photo-dependent excitonic mechanism and the charge migration kinetics in a colloidal ZnO-Au NC system. By using a picosecond-resolved F?rster resonance energy transfer (FRET) technique, we have demonstrated that excited ZnO nanoparticles (NPs) resonantly transfer visible optical radiation to the Au NPs, and the quenching of defect-mediated visible emission depends solely on the excitation level of the semiconductor. The role of the gold layer in promoting photolytic charge transfer, the activity of which is dependent upon the degree of excitation, was probed using methylene blue (MB) reduction at the semiconductor interface. Incident photon-to-current efficiency measurements show improved charge injection from a sensitizing dye to a semiconductor electrode in the presence of gold in the visible region. Furthermore, the short-circuit current density and the energy conversion efficiency of the ZnO-Au NP based dye-sensitized solar cell (DSSC) are much higher than those of a DSSC comprised of only ZnO NP. Our results represent a new paradigm for understanding the mechanism of defect-state passivation and photolytic activity of the metal component in metal-semiconductor nanocomposite systems.     

Core‐shell type dually fluorescent polymer nanoparticles for ratiometric pH‐sensing

The synthesis and pH‐sensing properties of fluorescent polymer nanoparticles (NPs) in the 20 nm diameter range with a sensitive dye covalently attached to the particle surface and a reference dye entrapped within the particle core are presented. Fluorescein‐functionalized NPs were readily obtained by conjugation of fluorescein isothiocyanate (FITC) to amine‐coated crosslinked polystyrene‐based nanoparticles prepared by microemulsion polymerization followed by postfunctionalization. This all water‐based method gave access to stable aqueous suspensions of pH‐sensing fluorescent NPs. The encapsulation of the insensitive reference fluorescent dye (1,9‐diphenylanthracene, DPA) was then conveniently achieved by soaking leading to dual fluorescent NPs containing about 20 DPA and 55 fluorescein, as deduced from spectroscopic analyses. This core‐shell type architecture maximizes the interactions of the sensing dye with the medium while protecting the reference dye. The variations of the ratio of the fluorescence emission intensities of the sensitive dye (fluorescein) to the reference dye (DPA) with pH show that the dual fluorescent NPs act as a ratiometric pH sensor with a measuring range between pH 4 and pH 8. This pH nanosensor was found to be fast, fully reversible, and robust without any leaching of dye over a long period of time. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6206–6213, 2008