Dual‐fluorophore Raspberry‐like Nanohybrids for Ratiometric pH Sensing

We report on the development of raspberry‐like silica structures formed by the adsorption of 8‐hydroxypyrene‐1,3,6‐trisulfonate (HPTS)@silica nanoparticles (NPs) on rhodamine B isothiocyanate (RBTIC)@silica NPs for ratiometric fluorescence‐based pH sensing. To overcome the well‐known problem of dye leaching which occurs during encapsulation of anionic HPTS dye in silica NPs, we utilized a polyelectrolyte‐assisted incorporation of the anionic HPTS. The morphological and optical characterization of the as‐synthesized dye‐doped NPs and the resulting nanohybrids were carried out. The pH‐sensitive dye, HPTS, incorporated in the HPTS‐doped silica NPs provided a pH‐dependent fluorescence response while the RBITC‐doped silica provided the reference signal for ratiometric sensing. We evaluated the effectiveness of the nanohybrids for pH sensing; the ratio of the fluorescence emission intensity at 510 nm and 583 nm at excitation wavelengths of 454 nm and 555 nm, respectively. The results showed a dynamic response in the acidic pH range. With this approach, nanohybrids containing different dyes or receptors could be developed for multifunctioning and multiplexing applications.     

Dimerization of Organic Dyes on Luminescent Gold Nanoparticles for Ratiometric pH Sensing

Synergistic effects arising from the conjugation of organic dyes onto non‐luminescent metal nanoparticles (NPs) have greatly broadened their applications in both imaging and sensing. Herein, we report that conjugation of a well‐known pH‐insensitive dye, tetramethyl‐rhodamine (TAMRA), to pH‐insensitive luminescent gold nanoparticles (AuNPs) can lead to an ultrasmall nanoindicator that can fluorescently report local pH in a ratiometric way. Such synergy originated from the dimerization of TAMRA on AuNPs, of which geometry was very sensitive to surface charges of the AuNPs and can be reversely modulated through protonation of surrounding glutathione ligands. Not limited to pH‐insensitive dyes, this pH‐dependent dimerization can also enhance the pH sensitivity of fluorescein, a well‐known pH‐sensitive dye, within a larger pH range, opening up a new pathway to design ultrasmall fluorescent ratiometric nanoindicators with tunable wavelengths and pH response ranges.     

A versatile preparation of azobenzene‐dye functionalized colored polymer nanoparticles by surface modification

A series of stable and translucent colored nanolatex, that is, colloidal aqueous suspensions of dye‐tagged polymer nanoparticles (NPs) in the 15‐ to 20‐nm diameter range, have been prepared by covalent attachment of azobenzene chromophores to the surface of reactive NPs. Primary crosslinked NPs bearing chlorobenzyl groups were produced by microemulsion copolymerization of styrene and vinylbenzylchloride. Amine‐functionalized NPs were obtained after a second functionalization step with polyamines (cyclam and polypropyleneimine dendrimers of first and third generations). Dye‐doped particles were obtained by reacting pyridylazo‐dimethylaminobenzene (PADA) with chlorobenzyl‐NPs and by reacting amine‐reactive dimethylaminoazobenzene dyes (DABsyl, DAB‐ITC) as well as Disperse Red 1 acrylate with polyamine‐coated NPs. Regardless the dye solubility, the grafting readily proceeded in aqueous suspensions at room temperature in the presence of a cationic surfactant without added solvent. Purple, red, and orange suspensions (maximum absorption around 550, 500, 430 nm), with dye loads ranging from 0.3 to 1.2 mmol/g, corresponding to 400–1800 azobenzene residues per NP, are obtained. The reported results indicate that functional polymer NPs, with remarkably accessible multiple anchoring sites, are useful building blocks. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3375–3386, 2008     

Synthesis and properties of chitosan‐based thermo‐ and pH‐responsive nanoparticles and application in drug release

In this research, thermo‐ and pH‐responsive nanoparticles with an average diameter of about 50–200 nm were synthesized via the surfactant‐free emulsion polymerization. The thermal/pH dual responsive properties of these nanoparticles were designed by the addition of a pH sensitive monomer, acrylic acid (AA), to be copolymerized with N‐isopropylacrylamide (NIPAAm) in a chitosan (CS) solution. The molar ratio of CS/AA/NIPAAm in the feed was changed to investigate its effect on structure, morphology, thermal‐ and pH‐responsive properties of the nanoparticles. It was found that CS‐PAA‐PNIPAAm nanoparticles could be well dispersed in the aqueous solution and carried positive charges on the surface. The addition of thermal‐sensitive NIPAAm monomer affected the polymerization mechanism and interactions between CS and AA. The particle size of the nanoparticles was found to be varied with the composition of NIPAAm monomer in the feed. The synthesized nanoparticles exhibited stimuli‐responsive properties, and their mean diameter thus could be manipulated by changing pH value and temperature of the environment. The nanoparticles showed a continuous release of the encapsulated doxycycline hyclate up to 10 days during an in vitro release experiment. The environmentally responsive nanoparticles are expected to be used in many fields such as drug delivery system. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2798–2810, 2009     

Near‐Infrared Light and pH‐Responsive Polypyrrole@Polyacrylic acid/Fluorescent Mesoporous Silica Nanoparticles for Imaging and Chemo‐Photothermal Cancer Therapy

We have rationally designed a new theranostic agent by coating near‐infrared (NIR) light‐absorbing polypyrrole (PPY) with poly(acrylic acid) (PAA), in which PAA acts as a nanoreactor and template, followed by growing small fluorescent silica nanoparticles (fSiO₂ NPs) inside the PAA networks, resulting in the formation of polypyrrole@polyacrylic acid/fluorescent mesoporous silica (PPY@PAA/fmSiO₂) core–shell NPs. Meanwhile, DOX‐loaded PPY@PAA/fmSiO₂ NPs as pH and NIR dual‐sensitive drug delivery vehicles were employed for fluorescence imaging and chemo‐photothermal synergetic therapy in vitro and in vivo. The results demonstrate that the PPY@PAA/fmSiO₂ NPs show high in vivo tumor uptake by the enhanced permeability and retention (EPR) effect after intravenous injection as revealed by in vivo fluorescence imaging, which is very helpful for visualizing the location of the tumor. Moreover, the obtained NPs inhibit tumor growth (95.6 % of tumors were eliminated) because of the combination of chemo‐photothermal therapy, which offers a synergistically improved therapeutic outcome compared with the use of either therapy alone. Therefore, the present study provides new insights into developing NIR and pH‐stimuli responsive PPY‐based multifunctional platform for cancer theranostics.     

Synthesis of azide‐functionalized nanoparticles by microemulsion polymerization and surface modification by click chemistry in aqueous medium

Stable translucent aqueous suspensions of azide‐functionalized cross‐linked nanoparticles (NPs), with diameters in the 15–20 nm range, were prepared using two synthetic approaches. Copolymerization of azidomethylstyrene (VBN₃), styrene, and divinylbenzene in various oil‐in‐water microemulsions led to NPs with modulable azide contents (0.53–0.78 mmol/g) and surface over volume distributions. Surface modifications of reactive NPs bearing chlorobenzyl groups, produced by microemulsion copolymerization of vinylbenzylchloride, with sodium azide led to azido‐coated NPs with high densities of peripheral groups (0.13–0.45 mmol/g). It is shown that the nature of the surfactant used for the preparation of the microemulsion has an impact on the incorporation of VBN₃ in the polymer particles as well as on the surface reaction yield. The azide‐functionalized NPs were used as clickable polymeric scaffolds for the grafting of sparingly water‐soluble dansyl and fluorescein derivatives through copper(I)‐catalyzed azide‐alkyne cycloaddition in water in the presence of surfactants as solubilizing agents to produce fluorescent NPs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Ion and pH Sensing with Colloidal Nanoparticles: Influence of Surface Charge on Sensing and Colloidal Properties

Ion sensors based on colloidal nanoparticles (NPs), either as actively ion‐sensing NPs or as nanoscale carrier systems for organic ion‐sensing fluorescent chelators typically require a charged surface in order to be colloidally stable. We demonstrate that this surface charge significantly impacts the ion binding and affects the read‐out. Sensor read‐out should be thus not determined by the bulk ion concentration, but by the local ion concentration in the nano‐environment of the NP surface. We present a conclusive model corroborated by experimental data that reproduces the strong distance‐dependence of the effect. The experimental data are based on the capability of tuning the distance of a pH‐sensitive fluorophore to the surface of NPs in the nanometer (nm) range. This in turn allows for modification of the effective acid dissociation constant value (its logarithmic form, pK_a) of analyte‐sensitive fluorophores by tuning their distance to the underlying colloidal NPs.     

Structures and photoactive properties of poly(styrene‐co‐vinylbenzophenone)

Poly(styrene‐co‐vinylbenzophenone) prepared by a graft reaction on polystyrene revealed photoactive properties under irradiation of UVA. The photoactive structural features of the polymer were examined via electron paramagnetic resonance (EPR) under irradiation of UVA and fluorescent light. The photoactive functions of the polymer such as antimicrobial performance and dye decolorization ability were investigated. The results revealed that the poly(styrene‐co‐vinylbenzophenone) could generate radicals under fluorescent and UVA irradiation, and some radicals could stay alive for about 30 min in a dark chamber. The photoexcited polymer showed excellent antibacterial ability and decolorization effect on methylene blue and methyl orange dye under both daylight and UVA light. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2423–2430, 2008     

Light and pH dual‐sensitive biodegradable polymeric nanoparticles for controlled release of cargos

In this article, a light and pH dual‐sensitive block copolymer PEG‐b‐poly(MPC‐Azo/DEA) was facilely prepared for the first time by azide‐alkyne click chemistry between amphiphilic block copolymer bearing pendant alkynyl group poly(ethylene glycol)‐poly(5‐methyl‐5‐propargylxycarbonyl‐1,3‐dioxane‐2‐one) (PEG‐b‐poly(MPC)) and two azide‐containing compounds azobenzene derivative (Azo‐N₃) and 2‐azido‐1‐ethyl‐diethylamine (DEA‐N₃). Light response of the polymeric nanoparticles benefits from the azobenzene segments and pH responsiveness is attributed to DEA moieties. The prepared copolymer could self‐assemble into spherical micelle particles. The morphological changes of these particles in response to dual stimuli were investigated by UV/vis spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM). Nile Red (NR) was utilized as probe, and fluorescence spectroscopy was served as an evidence for the enhanced release of cargos from polymeric nanoparticles under combined stimulation. Anticancer drug, DOX was loaded into the nanoparticles and the loaded‐DOX could be released from these nanoparticles under dual stimuli. MTT assays further demonstrated that PEG‐b‐poly(MPC) and PEG‐b‐poly(MPC‐Azo/DEA) were of biocompatibility and low toxicity against HepG2 cells as well as SMCC‐7721 cells. More importantly, the prepared DOX‐loaded nanoparticles exhibited good anticancer ability for the two cells. The synthesized light and pH dual‐sensitive biodegradable polymeric nanoparticles were expected to be platforms for precisely controlled release of encapsulated molecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1773–1783     

Facile aqueous synthesis and stabilization of nearly monodispersed gold nanospheres by poly(L‐proline)

A facile strategy is developed to synthesize Au nanoparticles (Au‐NPs) using water‐soluble poly(L ‐proline) (PLP). The synthesized NPs were characterized by TEM, FTIR and NMR spectroscopy, thermogravimetric analysis, and circular dichroism. It was found that PLP has a “dual” role as an efficient reductant of Au(III) and simultaneously as a stabilizing agent of Au‐NPs. The influence of PLP molecular weight, temperature, initial Au(III) concentration, and Au(III)/PLP molar ratio on the size and dispersity of Au‐NPs is examined. It was found that the unique extended secondary structure of PLP II resulted in the facile formation of highly crystalline Au‐NPs in water at a very low Au(III)/PLP molar ratio. These Au‐NPs have the smallest dimensions and size distributions among NPs synthesized so far by polymeric materials in aqueous media, and exhibit enduring colloidal stability. Therefore, by utilizing biocompatible and benign materials in water, we managed to obtain Au‐NPs, so as the final product is ready‐to‐use for biomedical applications. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis strategies to incorporate acrylic acid into N‐vinylcaprolactam‐based microgels

Two different synthesis strategies were used to synthesize N‐vinylcaprolactam (VCL)‐acrylic acid (AA)‐based temperature‐ and pH‐sensitive microgels under the adequate conditions to avoid possible hydrolysis of VCL due to the presence of carboxylic groups provided by AA. Polymeric and colloidal features of the microgels were analyzed: the partial conversion evolutions of each comonomer were determined by ¹H NMR and the swelling/deswelling behavior by means of Photon Correlation Spectroscopy. Considering that microgels are porous soft nanoparticles, conductimetric titrations at the swollen state were carried out to calculate the volumetric charge density. The results indicate that the addition of AA after 30 minutes of reaction time helped to incorporate higher amounts of AA into microgels and as a result, to obtain both temperature‐ and pH‐sensitive nanoparticles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Engineering of new crosslinked near‐infrared fluorescent polyethylene glycol bisphosphonate nanoparticles for bone targeting

Bisphosphonates (BPs) are nonhydrolysable pyrophosphate analogs with high affinity to hydroxyapatite (HAP, bone mineral) and are mainly used for treatment of various bone diseases. In this study, we designed and prepared crosslinked BP nanoparticles by dispersion copolymerization of three monomers: methacrylate PEG bisphosphonate, N‐(3‐aminopropyl) methacrylamide, and tetra(ethylene glycol) diacrylate. The size and size distribution of these PEG‐BP nanoparticles were controlled by changing various polymerization parameters. These BP particles possess dual functionality: covalent attachment of a dye (e.g., near IR fluorescent dye) or drug to the nanoparticles through the primary amine groups belonging to the aminopropyl methacrylamide monomeric units and chelation to the bone mineral HAP through the BP groups belonging to the methacrylate PEG bisphosphonate monomeric units, for enhanced long term bone‐targeted imaging and therapy applications. Body distribution of the optimal crosslinked BP nanoparticles was tested on a chicken embryo model via intravenous administration. This study indicated that the fluorescence intensity of the all organs (e.g., blood, spleen, liver, kidney, and heart) except the bones decreased significantly within 48 h (p < 0.05) while that of the bones hardly changed over that time (p > 0.05). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4282–4291     

Novel temperature‐ and pH‐responsive graft copolymers composed of poly(L‐glutamic acid) and poly(N‐isopropylacrylamide)

A series of novel temperature‐ and pH‐responsive graft copolymers, poly(L ‐glutamic acid)‐g‐poly(N‐isopropylacrylamide), were synthesized by coupling amino‐semitelechelic poly(N‐isopropylacrylamide) with N‐hydroxysuccinimide‐activated poly(L ‐glutamic acid). The graft copolymers and their precursors were characterized, by ESI‐FTICR Mass Spectrum, intrinsic viscosity measurements and proton nuclear magnetic resonance (¹H NMR). The phase‐transition and aggregation behaviors of the graft copolymers in aqueous solutions were investigated by the turbidity measurements and dynamic laser scattering. The solution behavior of the copolymers showed dependence on both temperature and pH. The cloud point (CP) of the copolymer solution at pH 5.0–7.4 was slightly higher than that of the solution of the PNIPAM homopolymer because of the hydrophilic nature of the poly(glutamic acid) (PGA) backbone. The CP markedly decreased when the pH was lowered from 5 to 4.2, caused by the decrease in hydrophilicity of the PGA backbone. At a temperature above the lower critical solution temperature of the PNIPAM chain, the copolymers formed amphiphilic core‐shell aggregates at pH 4.5–7.4 and the particle size was reduced with decreasing pH. In contrast, larger hydrophobic aggregates were formed at pH 4.2. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4140–4150, 2008     

pH‐responsive polymer core–shell nanospheres for drug delivery

Stimuli‐responsive polymer nanoparticles are playing an increasingly more important role in drug delivery applications. However, limited knowledge has been accumulated about processes which use stimuli‐responsive polymer nanospheres (matrix nanoparticles whose entire mass is solid) to carry and deliver hydrophobic therapeutics in aqueous solution. In this research, pyrene was selected as a model hydrophobic drug and a pyrene‐loaded core‐shell structured nanosphere named poly(DEAEMA)‐poly(PEGMA) was designed as a drug carrier where DEAEMA and PEGMA represent 2‐(diethylamino)ethyl methacrylate and poly(ethylene glycol) methacrylate, respectively. The pyrene‐loaded core‐shell nanospheres were prepared via an in situ two‐step semibatch emulsion polymerization method. The particle size of the core‐shell nanosphere can be well controlled through adjusting the level of surfactant used in the polymerization where an average particle diameter of below 100 nm was readily achieved. The surfactant was removed via a dialysis operation after polymerization. Egg lecithin vesicles (liposome) were prepared to mimic the membrane of a cell and to receive the released pyrene from the nanosphere carriers. The in vitro release profiles of pyrene toward different pH liposome vesicles were recorded as a function of time at 37 °C. It was found that release of pyrene from the core‐shell polymer matrix can be triggered by a change in the environmental pH. In particular the pyrene‐loaded nanospheres are capable of responding to a narrow window of pH change from pH = 5, 6, to 7 and can achieve a significant pyrene release of above 80% within 90 h. The rate of release increased with a decrease in pH. A first‐order kinetic model was proposed to describe the rate of release with respect to the concentration of pyrene in the polymer matrix. The first‐order rate constant of release k was thus determined as 0.049 h^?1 for pH = 5; 0.043 h^?1 for pH = 6; and 0.035 h^?1 for pH = 7 at 37 °C. The release of pyrene was considered to follow a diffusion‐controlled mechanism. The synthesis and encapsulation process developed herein provides a new approach to prepare smart nanoparticles for efficient delivery of hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4440–4450     

pH‐responsive near‐infrared emitting conjugated polymer nanoparticles for cellular imaging and controlled‐drug delivery

In this article, pH‐responsive near‐infrared emitting conjugated polymer nanoparticles (CPNs) are prepared, characterized, and their stabilities are investigated under various conditions. These nanoparticles have capacity to be loaded with water insoluble, anticancer drug, camptothecin (CPT), with around 10% drug loading efficiency. The in vitro release studies demonstrate that the release of CPTs from CPNs is pH‐dependent such that significantly faster drug release at mildly acidic pH of 5.0 compared with physiological pH 7.4 is observed. Time and dose‐dependent in vitro cytotoxicity tests of blank and CPT‐loaded nanoparticles are performed by real‐time cell electronic sensing (RT‐CES) assay with hepatocellular carcinoma cells (Huh7). The results indicate that CPNs can be effectively utilized as vehicles for pH‐triggered release of anticancer drugs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 114–122     

RAFT synthesis of amphiphilic (A‐ran‐B)‐b‐C diblock copolymers with tunable pH‐sensitivity

RAFT homopolymerization of 2‐(diisopropylamino)ethyl methacrylate (DPA) and 2‐(diethylamino)ethyl methacrylate (DEA) and their random copolymerization were investigated. The random copolymers of DPA‐ran‐DEA were synthesized and used as macro‐CTA to prepare poly(DPA‐ran‐DEA)‐b‐poly(N‐(2‐hydroxypropyl) methacrylamide) amphiphilic block copolymers. The ¹H NMR and GPC measurements confirmed the successful synthesis of these copolymers. The potentiometric titration results showed that the pK_b values of these copolymers were in the range of 6.7 ～ 7.7 and linearly varied with the DPA/DEA composition, regardless of the block length of HPMA. The pH‐induced micellization in PBS solution was verified by fluorescence spectroscopy. The dynamic light scattering evaluation showed that the hydrodynamic diameters of these micelles are between 37 ～ 43 nm © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3740–3748, 2008     

Synthesis and characterization of PDEAEMA‐based magneto‐nanogels: Preliminary results on the biocompatibility with cells of human peripheral blood

Nanogels based on biocompatible, dual pH‐ and temperature‐sensitive poly(2‐(diethylamino)ethyl) methacrylate (PDEAEMA) have been successfully used as nanocontainers for the encapsulation of magnetite, Fe₃O₄ magnetic nanoparticles (MNPs). For this purpose, citric acid‐coated MNPs were encapsulated into previously synthesized PDEAEMA‐based nanogels using a poly(ethyleneglycol)‐based stabilizer. After the encapsulation of the magnetite MNPs, the so‐called magneto‐nanogels (MNGs) were proved to be multiresponsive on temperature, pH, and magnetic field and colloidally stable. Moreover, preliminary studies on the biocompatibility of these MNGs with cells of human peripheral blood were performed and evidenced quite tolerable biocompatibility, thus suggesting potential use in biomedical applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1479–1494     

Dual Thermo‐ and pH‐Responsive Zwitterionic Sulfobataine Copolymers for Oral Delivery System

A novel oral delivery system consisting of thermoresponsive zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and pH‐responsive poly(2‐(diisopropylamino)ethyl methacrylate) (PDPA) is synthesized via free radical polymerization. This copolymer can self‐aggregate into nanoparticles via electrostatic attraction between ammonium cation and sulfo‐anion of PSBMA and successfully encapsulate anticancer drug, curcumin (CUR), with highest loading content of 2.6% in the P(SBMA‐co‐DPA) nanoparticles. The stimuli‐responsive phase transition behaviors of P(SBMA‐co‐DPA) copolymers at different pH buffer solution show pH‐dependent upper critical solution temperature (UCST) attributed to the influence of protonation/deprotonation of the pH‐responsive DPA segments. Through the delicate adjustment of the PSBMA/PDPA molar ratios, the stimuli‐responsive phase transition could be suitable for physiological environment. The kinetic drug release profiles demonstrate that P(SBMA‐co‐DPA) nanoparticles have the potential as oral delivery carriers due to their effective release of entrapped drugs in the stimulated intestinal fluid and preventing the deterioration of drug in stimulated gastric fluid.

     

Self‐assembly of thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) micelles for drug delivery

Self‐assembled thermo‐ and pH‐responsive poly(acrylic acid)‐b‐poly(N‐isopropylacrylamide) (PAA‐b‐PNIPAM) micelles for entrapment and release of doxorubicin (DOX) was described. Block copolymer PAA‐b‐PNIPAM associated into core‐shell micelles in aqueous solution with collapsed PNIPAM block or protonated PAA block as the core on changing temperature or pH. Complexation of DOX with PAA‐b‐PNIPAM triggered by the electrostatic interaction and release of DOX from the complexes due to the changing of pH or temperature were studied. Complex micelles incorporated with DOX exhibited pH‐responsive and thermoresponsive drug release profile. The release of DOX from micelles was suppressed at pH 7.2 and accelerated at pH 4.0 due to the protonation of carboxyl groups. Furthermore, the cumulative release of DOX from complex micelles was enhanced around LCST ascribed to the structure deformation of the micelles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5028–5035, 2008