Methylene blue as a DNA probe for a comparative study of Cd, Pb and Cr ions binding to calf thymus DNA

Methylene blue (MB) was developed as a sensitive DNA probe for a comparative study of Cd²⁺, Pb²⁺ and Cr³⁺ ions binding with calf thymus DNA (ctDNA). The fluorescence intensity of the MB-ctDNA system increased dramatically when heavy metal ions (Cd²⁺, Pb²⁺ and Cr³⁺ ions) were added, which indicated that some of the bound MB molecules were released from the ctDNA base pairs. To compare the binding affinity of these three different heavy metal ions with ctDNA, the relationships between the fluorescence intensity of the MB-ctDNA-M (Metal ions) system and the concentration ratio of [M]/[DNA(p)] were investigated. The results showed that the order of the binding affinity of heavy metal ions with ctDNA had the following sequence: Cr³⁺> Cd²⁺>Pb²⁺. This order was further proved by the effects of heavy metal ions on the number of MB bound to ctDNA, the measurements of binding constants of these heavy metal ions to ctDNA, and the effects of heavy metal ions on the absorption of the MB-ctDNA system. In addition, the interaction mechanisms of Cd²⁺, Pb²⁺ and Cr³⁺ ions with ctDNA were also discussed in detail. These results indicated that their interaction mechanisms are related to the concentration ratios of heavy metal ions to DNA.     

A Pyrene-based Highly Selective Turn-on Fluorescent Sensor for Copper(II) Ion and its Application in Live Cell Imaging

A new pyrene derivative (chemosensor 1) containing a picolinohydrazide moiety exhibits high selectivity for Cu²⁺ ion detection in mixed aqueous media (CH₃OH:H₂O = 7:3). Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence for the system. The apparent association constant (K _a) of Cu²⁺ binding in chemosensor 1 was found to be 2.75*10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5–8. Moreover, by means of fluorescence microscopy experiments, it is demonstrated that 1 can be used as a fluorescent probe for detecting Cu²⁺ in living cells.     

New dithiacrown–ether butadienyl dyes: synthesis,structure, and complex formation with heavy metal cations

Benzothiazole type butadienyl dyes containing a dithia‐15‐crown‐5 ( 2a ) or dithia‐18‐crown‐6 ether ( 2b ) moieties were synthesized. The structures of dyes 2a , b and their complexes with Ag⁺ and Pb²⁺ were studied by an X‐ray crystallography. It was found that the conformations of dithiacrown–ether moieties of dyes 2a , b are unfavorable for complex formation and change significantly upon binding of Ag⁺ or Pb²⁺. The complexation of 2a , b with Ag⁺, Cd²⁺, Pb²⁺, and Hg²⁺ in water–acetonitrile mixtures with different contents of water (P_W = 0–75%, v/v) was studied by ¹H NMR, UV–Vis spectroscopy, and polarography. In anhydrous acetonitrile, the stability constants of 1:1 complexes change in the sequence Cd²⁺ < Pb²⁺ ≤ Ag⁺ << Hg²⁺ in the case of 2a and in the sequence Cd²⁺ < Ag⁺ < Pb²⁺ << Hg²⁺ in the case of 2b . As P_W increases, the thermodynamic stability of Ag⁺ complexes increases. The opposite effect is observed for the complexes with Cd²⁺, Pb²⁺, and Hg²⁺. When P_W ～ 50%, the stability constants of complexes with Cd²⁺ and Pb²⁺ become too small to be measured. The selectivity of ligands 2a , b toward Hg²⁺ versus Ag⁺ is very high at any P_W values (selectivity coefficients > 10⁴). The complexation of 2a , b with Hg²⁺ at P_W ≤ 50% is accompanied by a substantial hypsochromic effect. This allows dithiacrown‐containing butadienyl dyes to be used as selective optical molecular sensors for heavy metal ions, in particular, in aqueous solutions. Copyright © 2009 John Wiley & Sons, Ltd.     

A Novel Hg<Superscript>2+</Superscript> Selective Ratiometric Fluorescent Chemodosimeter Based on an Intramolecular FRET Mechanism

A irreversible Hg²⁺ selective ratiometric fluorescence probe FR, a fluorescein fluorophore linked to a rhodamine B hydrazide by a thiourea spacer, was designed and synthesized. The developed probe FR exhibited great ratiometric fluorescence enhancement and remarkable yellow-magenta color change toward Hg²⁺ with excellent selectivity in aqueous acetone solution, and the ratiometric fluorescence response to Hg²⁺ was not interfered by other metal cations including Fe³⁺, Co²⁺, Ni²⁺, Cr³⁺, Zn²⁺, Pb²⁺, Cd²⁺, Ca²⁺, Mg²⁺, Ba²⁺ and Mn²⁺. The linear range and the detection limit of this supposed ratiometric fluorescence method for Hg²⁺ were 0.0–10.0 × 10⁻⁶ and 5 × 10⁻⁸ M, respectively.     

A New Highly Sensitive and Selective Fluorescent Cadmium Sensor

Condensation product (L) of salicylaldehyde and semicarbazide behaves as a fluorescent sensor for Cd²⁺ ion, in 1:1 DMSO:H₂O, over Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺ ions. The emission peak of L at λ_max = 520 nm, on excitation with 420 nm wavelength photons, showed an enhancement in intensity of ca 60-fold when interacted with Cd²⁺ ion. The intensity was however found to remain unaltered when interacted with metal ions—Mn²⁺, Fe²⁺, Ni²⁺, Co²⁺, Cu²⁺, Pb²⁺ and Hg²⁺. The intensity increases by approximately 20 fold on interaction with Zn²⁺ ion. The increase in the fluorescent peak can be explained on the basis of photo induced electron transfer (PET) mechanism. A 1:1 complexation between Cd²⁺ and L with log β = 4.25 has been proved.     

A Novel Ratiometric Fluorescent Chemosensor for Cd2+

Novel ratiometric fluorescent chemosensor C7 was synthesized and characterized by UV–vis and fluorescence spectroscopy. C7 showed high sensitivity for Cd²⁺ among Na⁺, Mg²⁺, Cu²⁺, Pb²⁺, Ni²⁺, Fe³⁺, Zn²⁺, Ag⁺ Hg²⁺ and Cd²⁺ in ethanol.     

A Selective Fluorescent Sensor for Hg2+

A novel rhodamine based fluorescent chemosensor RQP was prepared and characterized by ¹HNMR, ¹³CNMR and HR-MS. The properties of RQP were studied through UV–Vis spectroscopy and fluorescence spectroscopy. RQP showed highly selectivity toward Hg²⁺ over other metal ions, including Ag⁺, Cd²⁺, Cu²⁺, Na⁺, Mg²⁺, Ni²⁺, Pb²⁺, Fe³⁺, and Zn²⁺ in aqueous solutions. The recognition process is reversible and confirmed by EDTA experiment.     

Effect of Pendant Group Length Upon Metal Ion Complexation in Acetonitrile by Di-Ionized Calix[4]Arenes Bearing Two Dansyl Fluorophores

A series of three di-ionizable calix[4]arenes with two pendant dansyl (1-dimethylaminonaphthalene-5-sulfonyl) groups linked to the lower rims was synthesized. Structures of the three ligands were identical except for the length of the spacers which connected the two dansyl groups to the calix[4]arene scaffold. Following conversion of the ligands into their di-ionized di(tetramethylammonium) salts, absorption and emission spectrophotometry were utilized to probe the influence of metal cation (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Ag⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) complexation in acetonitrile. Upon complexation with these metal cations, emission spectra underwent marked red shifts and quenching of the dansyl group fluorescence for the di-ionized ligand with the shortest spacer. A similar effect was noted for the di-ionized ligand with an intermediate spacer for all of the metal ions, except Ba²⁺. For the di-ionized ligand with the longest spacer, the metal cations showed different effects on the emission spectrum. Li⁺, Mg²⁺, Ca²⁺ and Ba²⁺ caused enhancement of emission intensity with a red shift. Other metal cations produce quenching with red shifts in the emission spectra. Transition metal cations interacted strongly with all three di-ionized ligands. In particular, Fe³⁺ and Hg²⁺ caused greater than 99% quenching of the dansyl fluorescence in the di-ionized ligands.     

Selective Recognition of Cobalt (II) Ion by a New Cryptand Compound with N2O2S2 Donor Atom Possessing 2-Hydroxy-1-Naphthylidene Schiff Base Moiety

A new cryptand compound carrying 2-hydroxy-1-naphthylidene Schiff base moiety (3) was designed and synthesized by reaction of the corresponding macrobicyclic amine compound (1) and 2-hydroxy-1-naphthaldehyde (2). The influence of metal cations such as Mg²⁺, Ca²⁺, Sr²⁺, Fe²⁺,Co²⁺, Mn²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Al³⁺ and Pb²⁺ on the spectroscopic properties of the new fluoroionophore was investigated in acetonitrile-dichloromethane solution (9.5/0.5) by means of absorption and emission spectrometry. The blue shifts on the fluorescence spectrum were observed for all metal cations at 504nm. At the same time the fluorescence spectrum of the ligand showed quenching in the intensity of the signal at 504 nm for all metal cations except for Zn²⁺. Interaction of Co²⁺ with the ligand caused quenching of naphtyl fluorescence higher than 84%. The method showed good selectivity and sensitivity for Co²⁺ with respect to other metal cations with linear range and detection limit of 1.5 × 10⁻⁷ to 3.3 × 10⁻⁶M and 4.8 × 10⁻⁸M respectively.     

ESR detection of pressure-induced structural change around Pb2+ and Cd2+ in soda borate glasses

The pressure-induced changes in the coordination structure of Cd²⁺ and Pb²⁺ were examined by measuring the ESR spectra of γ-ray-induced Cd⁺ and Pb³⁺ centers. The s-character of the magnetic electron in the centers increased on densification and was estimated from the analysis of the hyperfine absorption due to a ²⁰⁷Pb³⁺ and ¹¹¹Cd⁺ and ¹¹³Cd⁺. The increase in the s-character means that the strength of both Pb²⁺O and Cd²⁺O bonds was reduced upon densification and that the coordination number of Cd²⁺ and Pb²⁺ increased. The coordination sphere of Cd²⁺, which responds more sensitively than that of Pb²⁺ to the change in chemical environments, was more heavily compressed than that of Pb²⁺.     

A Novel Highly Sensitive and Selective Fluorescent Sensor for Imaging Copper (II) in Living Cells

In this work, we designed and synthesized a novel quinolin-based derivative which exhibited signaling behaviors for Cu²⁺. Upon the addition of Cu²⁺ to the solution of the molecule, it displayed an obvious fluorescence quenching in a linear fashion due to the formation of a 1:1 metal–ligand complex. This fluorescent sensor exhibited a rare sensitivity toward Cu(II) (the level of magnitude could be 6?×?10^?8), a rapid response (<10 s) and also high selectivity toward Cu²⁺ over other metal ions such as Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Fe³⁺, Mn²⁺, Hg²⁺, Pb²⁺, Cd²⁺, Cr³⁺, Co²⁺, Zn²⁺ and Al³⁺. Simultaneously, the cell imaging experiments and filter paper test demonstrated its extensive applicability.     

An asymmetric imidazole derivative as potential fluorescent chemosensor for Fe in aqueous solution

A novel conjugated molecule, L, based on 2,4,5-triphenylimidazole and 6-phenyl-2,2′-bipyridine (HC^∧N^∧N) was synthesized in two steps. The molecule can recognize Fe³⁺ in aqueous solution (THF/H₂O, 1/1, v/v) by the appearance of new emission bands at 416 and 442 nm, which can be attributed to the emission of the newly formed L-Fe³⁺ complex. The binding constant of the complex was calculated to be (6.6±0.39)×10³ M⁻¹, and its formation was also confirmed by the appearance of isosbestic points at 312 and 381 nm in the UV-visible spectral titration experiment. While other transition and rare-earth metal ions, such as Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Eu³⁺ and Nd³⁺, can only cause some decrease of L's fluorescence, alkali and alkaline earth metal ions, such as Li⁺, Na⁺, K⁺, Mg²⁺ and Ca²⁺, almost have no effect on L's fluorescence. The fluorescence of L can be recovered by the addition of EDTA to the L-Fe³⁺ system just due to EDTA's stronger chelating ability than that of L.     

Salicylaldehyde Phenylhydrazone: A New Highly Selective Fluorescent Lead (II) Probe

The fluorescence intensity of salicylaldehyde phenylhydrazone (L), in 1:1 (v/v) CH₃OH:H₂O was enhanced by ca. 100 times with a blue shift in emission maximum, on interaction with Pb²⁺ ion. No enhancement in fluorescent intensity of L was observed on interaction with metal ions - Na⁺, K⁺, Ca²⁺, Cu²⁺, Ni²⁺, Zn²⁺, Cd²⁺ and Hg²⁺. This signal transduction was found to occur via photoinduced electron transfer (PET) mechanism. A 1:1 complexation between Pb²⁺ and L with log β?=?7.86 has been proved from fluorescent and UV/Visible spectroscopic data. The detection limit of Pb²⁺ was calculated to be 6.3?×?10^?7?M.     

A New Sensitive and Selective Off-On Fluorescent Zn<Superscript>2+</Superscript> Chemosensor Based on 3,3′,5,5′-Tetraphenylsubstituted Dipyrromethene

3,3′,5,5′-Tetraphenyl-2,2′-dipyrromethene was described as a highly sensitive and selective Off-on fluorescent colorimetric chemosensor for Zn²⁺ based on the chelation-enhanced fluorescence (CHEF) effect. The reaction of dipyrromethene ligand with Zn²⁺ induces the formation of the [ZnL₂] complex, which exhibits the increasing fluorescence in 120 fold compared with ligand in the propanol-1/cyclohexane (1:30) binary mixture. The Zn²⁺ detection limit was 1.4 × 10^?7 М. The UV-Vis and fluorescence spectroscopic studies demonstrated that the dipyrromethene sensor was highly selective toward Zn²⁺ cations over other metal ions (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Cd²⁺ and Pb²⁺), excluding Hg²⁺.     

Fluorescence Sensors for Selective Detection of Hg2+ Ion Using a Water-Soluble Poly(vinyl alcohol) Bearing Rhodamine B Moieties

The novel water-soluble poly(vinyl alcohol) with pendant rhodamine B moiety as colorimetric and fluorescene chemosensor for Hg²⁺ ions was prepared by grafting poly(vinyl alcohol) using rhodamine B hydrazide and hexamethylenediisocyanate as fluorescent dye and coupling agent, respectively. Because of their good water-solubility, the polymers binding rhodamine B can be used as chemosensors in aqueous media. With the addition of Hg²⁺ ions into the aqueous solution, visual color changes and fluorescence enhancements were detected. In addition, we also noticed that other metal ions such as Ag⁺, Cd²⁺, Co²⁺, Cu²⁺, K⁺, Mg²⁺, Ba²⁺, Fe²⁺, Ni²⁺, Pb²⁺, Cr³⁺, Fe³⁺ and Zn²⁺ cannot induce obvious changes to the fluorescence spectra of the polymer chemosensors. The combination of water solubility and positive fluorescence response as well as color change are hence particularly promising for the practical utility of the sensors.     

Design and Synthesis of Highly Photostable Yellow–Green Emitting 1,8-Naphthalimides as Fluorescent Sensors for Metal Cations and Protons

Two highly photostable yellow–green emitting 1,8-naphthalimides 5 and 6, containing both N-linked hindered amine moiety and a secondary or tertiary cation receptor, were synthesized for the first time. Novel compounds were configured as “fluorophore–spacer–receptor” systems based on photoinduced electron transfer. Photophysical characteristics of the dyes were investigated in DMF and water/DMF (4:1, v/v) solution. The ability of the new compounds to detect cations was evaluated by the changes in their fluorescence intensity in the presence of metal ions (Cu²⁺, Pb²⁺, Zn²⁺, Ni²⁺, Co²⁺) and protons. The presence of metal ions and protons was found to disallow a photoinduced electron transfer leading to an enhancement in the dye fluorescence intensity. Compound 5, containing secondary amine receptor, displayed a good sensor activity towards metal ions and protons. However the sensor activity of dye 6, containing a tertiary amine receptor and a shorter hydrocarbon spacer, was substantially higher. The results obtained indicate the potential of the novel compounds as highly photostable and efficient “off–on” pH switchers and fluorescent detectors for metal ions with pronounced selectivity towards Cu²⁺ ions.     

8-Hydroxyquinoline Functionalized Graphene Oxide: an Efficient Fluorescent Nanosensor for Zn<Superscript>2+</Superscript> in Aqueous Media

A nanosensor, based on 8-hydroxyquinoline functionalized graphene oxide, was developed for the fluorescence detection of Zn²⁺. It showed high selectivity and sensitivity for Zn²⁺ion in aqueous solution over other metal ions such as Li⁺, Na⁺, Ca²⁺, Mg²⁺, Al³⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Ni²⁺, Pb²⁺, Fe²⁺, Fe³⁺and Cr³⁺. Due to the linearity of the emission intensity toward Zn²⁺ concentration, fluorescent technique could be used for the detection of Zn²⁺ ion even at very low concentrations.     

Removal of heavy metals from aqueous solutions using Fe3O4, ZnO, and CuO nanoparticles

This study investigated the removal of Cd²⁺, Cu²⁺, Ni²⁺, and Pb²⁺ from aqueous solutions with novel nanoparticle sorbents (Fe₃O₄, ZnO, and CuO) using a range of experimental approaches, including, pH, competing ions, sorbent masses, contact time, scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The images showed that Fe₃O₄, ZnO, and CuO particles had mean diameters of about 50?nm (spheroid), 25?nm (rod shape), and 75?nm (spheroid), respectively. Tests were performed under batch conditions to determine the adsorption rate and uptake at equilibrium from single and multiple component solutions. The maximum uptake values (sum of four metals) in multiple component solutions were 360.6, 114.5, and 73.0?mg?g^?1, for ZnO, CuO, and Fe₃O₄, respectively. Based on the average metal removal by the three nanoparticles, the following order was determined for single component solutions: Cd²⁺?>?Pb²⁺?>?Cu²⁺?>?Ni²⁺, while the following order was determined in multiple component solutions: Pb²⁺?>?Cu²⁺?>?Cd²⁺?>?Ni²⁺. Sorption equilibrium isotherms could be described using the Freundlich model in some cases, whereas other isotherms did not follow this model. Furthermore, a pseudo-second order kinetic model was found to correctly describe the experimental data for all nanoparticles. Scanning electron microscopy, energy dispersive X-ray before and after metal sorption, and soil solution saturation indices showed that the main mechanism of sorption for Cd²⁺ and Pb²⁺ was adsorption, whereas both Cu²⁺ and Ni²⁺ sorption were due to adsorption and precipitation. These nanoparticles have potential for use as efficient sorbents for the removal of heavy metals from aqueous solutions and ZnO nanoparticles were identified as the most promising sorbent due to their high metal uptake.     

Condensation Product of Phenylalanine and Salicylaldehyde: Fluorescent Sensor for Zn<Superscript>2+</Superscript>

The condensation product of phenylalanine and salicylaldehyde (L) was synthesised and characterised which was found to be selective fluorescent “off-on” sensor for Zn²⁺ ion with the detection limit 10^?5 M. The sensor is free of interferences from metal ions - Na⁺, K⁺, Al³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Pb²⁺, Cd²⁺ and Hg²⁺. The Fluorescence and the UV/visible spectral data reveals a 1:1 interaction between the sensor and Zn²⁺ ion with binding constant 10⁸. The DFT and TDDFT calculations confirm the structures of the sensor and the sensor-Zn²⁺ complex.