Synthesis of isotactic copolymers of 4-methyl-1-pentene by living polymerization catalyzed by zirconium non-metallocene complexes

Amorphous isotactic poly(4-methyl-1-pentene) was synthesized from 4-methyl-1-pentene in the presence of the zirconium complex (η⁵-C₅Me₅)ZrMe[PhCH₂NC(Me)N-tert-Bu][B(C₆H₅)₄] as a catalyst of living polymerization and characterized. A number of linear isotactic copolymers of 4-methyl-1-pentene with 1-hexene and functionalized olefins, such as 5-(trialkylsiloxy)-1-pentene, were prepared under similar conditions. The feasibility of chemical modification of the functionalized copolymers to yield hydroxylated copolymers was studied. All the polymers obtained were characterized by means of the GPC, DSC, X-ray diffraction, and ¹³C and ¹H NMR techniques.     

Copolymerization of propylene with higher α‐olefins in the presence of the syndiospecific catalyst i‐Pr(Cp)(9‐Flu)ZrCl2/MAO

The catalyst system i‐Pr(Cp)(9‐Flu)ZrCl₂/methylaluminoxane was used for the synthesis of random syndiotactic copolymers of propylene with 1‐hexene, 1‐dodecene, and 1‐octadecene as comonomers. An investigation of the microstructure by ¹³C NMR spectroscopy revealed that the stereoregularity of the copolymers decreased because of an increase in skipped insertions in the presence of the higher 1‐olefin. The melting temperature of the copolymers, as measured by differential scanning calorimetry (DSC), decreased linearly with increasing comonomer content independently of the comonomer nature. During the DSC heating cycle, an exothermic peak indicating a crystallization process was observed. The decrease in the crystallization temperature with higher 1‐olefin content, measured by crystallization analysis fractionation, indicated a small but significant dependence on the nature of the comonomer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 128–140, 2002     

Characterization of Polyethylene Nascent Powders Synthesized with TpTiCl2(OR) Catalysts

Summary: Different kinds of polyethylene and ethylene-1-hexene copolymers were synthesized with TpTiCl₂(OR) (Tp = hydrotris(pyrazolyl)borate; R = Et, i-Pr, n-Bu) catalysts with and without H₂. The polymers were characterized by ¹³C NMR, capillary viscosimetry or GPC, and DSC. The homopolymers showed properties characteristic of ultra-high molecular weight polyethylenes (UHMWPE) with linear structure and high density polyethylenes (HDPE) with molecular weights in the range of commercial grades under hydrogen atmosphere. The copolymers showed a 1-hexene incorporation up to 6 mol-%. Important differences in the thermal properties were observed between the first DSC (nascent powders) and the second DSC heatings (melt-crystallized samples), which evidenced the molecular weights influence on the melt-crystallized samples.     

Etude des copolymeres (ethylene-hexene-1) par resonance magnetique nucleaire du proton et du carbone 13

Ethylene 1-hexene copolymers obtained by catalytic polymerization have been examined by ¹H and ¹³C NMR. Copolymer compositions have been determined by ¹H NMR and i.r. and the sequence distributions for 1-hexene by ¹³C NMR. Variations of the copolymer microstructure have been related to the experimental conditions for copolymerization.     

Studies of Intermolecular Heterogeneity Distribution in Ethylene/1-hexene Copolymers Using DSC Method

The investigation of the intermolecular composition distribution of an ethylene/1-hexene copolymers using DSC method has been carried out. The known methods: step crystallization (SC) and successive self-nucleation/annealing (SSA) have been adapted for this purpose, and particularly, the optimal condition of the process have been chosen to enable the best fractional crystallization of the copolymer. The method has been applied for fractionation of two ethylene/1-hexenecopolymers synthesized with supported vanadium and zirconocene catalysts and having similar concentrations of 1-hexene. Although metallocene catalysts are known from their more homogeneous structure of active sites in comparison to multi-site Ziegler–Natta catalysts, the copolymers obtained over both catalytic systems gave DSC curves resolved into several peaks but with different melting points. Using the Thomson–Gibbs equation, comparable average lamellar thickness of the separated peaks has been calculated. The amounts of copolymer fraction with defined lamellar thickness have been determined. It was obtained that the copolymer produced from the metallocene system contains a thinner and more homogeneous lamella thickness than that obtained with Ziegler–Natta vanadium catalyst supported on the same carrier. This revised version was published online in August 2006 with corrections to the Cover Date.     

Analysis of microstructure of ethylene–1-hexene copolymer prepared over thermally pretreated MgCl2/THF/TiCl4bimetallic catalyst

Thermally pretreated catalysts were prepared by heating MgCl₂/THF/TiCl₄ (TT-0) at 80°C for 5 min (TT-1) and 60 min (TT-2), and at 108°C for 5 min (TT-3) and 60 min (TT-4). Ethylene–1-hexene copolymers were prepared with these catalysts. The TT-1 catalyst produced more blocky and higher 1-hexene content polymer than TT-0, 2, 3, and 4. Temperature rising elution fractionation (TREF) analysis was used to investigate the chemical composition distribution of the ethylene–1-hexene copolymer, exhibiting bimodal distribution for TT-0 and trimodal for TT-1, 2, 3, and 4. A portion of higher hexene content of the copolymer markedly increased when the copolymerization was performed with TT-1, indicating that copolymerization active sites were newly generated. Portion of homopolyethylene increased drastically when the copolymerization was performed with TT-4, indicating that ethylene homopolymerization active sites were increased. Gel permeation chromatography (GPC) also revealed that three kinds of active sites existed on the catalyst. ¹³C-NMR spectrum of each fraction after TREF analysis suggested that the isospecific active site could polymerize 1-hexene well, resulting in random and alternating copolymers. A scheme for generation of the active site and change of its nature during thermal treatment of bimetallic complex catalyst is proposed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 291–300, 1998     

The copolymerization of propylene with higher,linear α‐olefins

Propylene was copolymerized with the linear α‐olefins 1‐octene, 1‐decene, 1‐tetradecene, and 1‐octadecene. The metallocene catalyst Me₂Si(2‐Me Benz[e]Ind)₂ZrCl₂, in conjunction with methylalumoxane as a cocatalyst, was used to synthesize the copolymers. The copolymers were characterized by ¹³C and ¹H NMR with a solvent mixture of 1,2,4‐trichlorobenzene (TCB) and benzene‐d₆ (9/1) at 100 °C. Thermal analyses were carried out to determine the melting and crystallization temperatures, whereas the molecular weights and molecular weight distributions were determined by gel permeation chromatography with TCB at 140 °C. Glass‐transition temperatures were determined with dynamic mechanical analysis. Relationships among the comonomer type and amount of incorporation and the melting/crystallization temperatures, glass‐transition temperature, crystallinity, and molecular weight were established. Moreover, up to 3.5% of the comonomer was incorporated, and there was a decrease in the molecular weight with increased comonomer content. Also, the melting and crystallization temperatures decreased as the comonomer content increased, but this relationship was independent of the comonomer type. In contrast, the values for the glass‐transition temperature also decreased with increased comonomer content, but the extent of the decrease was dependent on the comonomer type. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4110–4118, 2000     

Structure formation of random isotactic copolymers of propylene and 1-hexene or 1-octene at rapid cooling

The effect of variation the cooling rate in a wide range between 10^?2 and 10³ K s^?1 on solidification the relaxed melt of random isotactic copolymers of propylene with low amount of 1-hexene or 1-octene has been studied. Emphasis has been placed on the structure formation at rapid cooling and an evaluation of the conditions required to permit crystallization, mesophase formation, or suppression of any ordering. The presence of low amount of either 1-hexene or 1-octene co-units in the propylene chain decreases drastically the critical cooling rate required for suppression of crystallization from about 150–200 K s^?1 in the homopolymer to about only 10 K s^?1 in the copolymers; increasing the cooling rate beyond these limits allowed mesophase formation or even generation of fully amorphous samples. The study of the kinetics of formation of specific structures is completed by a complementary analysis of the X-ray structure, morphology and superstructure of the ordered phase. The hindrance of non-isothermal crystallization and mesophase formation of random copolymers of propylene with 1-hexene or 1-octene is compared with that in propylene–1-butene copolymers; addition of only 2–3 mol% 1-hexene or 1-octene into the propylene chain leads to even larger hindrance of the ordering process than the addition of more than 10 mol% 1-butene.     

Crystallization of novel poly(ε-caprolactone)-<Emphasis Type="Italic">block</Emphasis>-poly(propylene adipate) copolymers

Poly(ε-caprolactone)-block-poly(propylene adipate) (PCL-block-PPAd) copolymers were prepared using a combination of polycondensation and ring opening polymerization of ε-CL. ¹H-NMR and ¹³C-NMR spectroscopy showed that the prepared copolymers were block. Also, the copolymer composition was calculated from NMR spectra and was found similar to the feeding ratio. The copolymers formed PCL crystals as was proved by WAXD. The crystallization rates and degree of crystallinity, measured from DSC crystallization experiments, decreased with PPAd content. The equilibrium melting points of PCL were estimated applying the Hoffmann–Weeks method and the observed melting point depression was analyzed using the Nishi–Wang equation which showed that there is some miscibility of the copolymer segments. Isothermal crystallization experiments after self-nucleation were performed to distinguish the nucleation and crystal growth stages during isothermal crystallization. The secondary nucleation theory was then used and the obtained data for crystallization rates, estimated from the inverse of the crystallization half-times, were analyzed. The resulting values for nucleation constant K _g, and also for the surface free energies and work of chain folding, increased with PPAd content due to topological restrictions.     

Ethylene/1-hexene copolymerizations by syndioselective metallocenes: Direct comparison of Me2C(Cp)(Flu)ZrMe2 with Et(Cp)(Flu)ZrMe2

Copolymerizations of ethylene with 1-hexene have been carried out by using two metallocenes: highly syndiospecific isopropylidene(1-η⁵-cyclopentadienyl)(1-η⁵-fluorenyl)-dimethylzirconium (Me₂C(Flu)(Cp)ZrMe₂, 1) and less syndiospecific (1-fluorenyl-2-cyclopentadienylethane)-dimethylzirconium (Et(Flu)(Cp)ZrMe₂, 2), in the presence of [Ph₃C][B(C₆F₅)₄] as a cocatalyst. The effect of different types of bridges on the catalytic activity and comonomer reactivity was reported. The ethano bridged 2 compound of a smaller dihedral angle showed much higher activity than the 1 compound in the ethylene homo- and copolymerizations. The catalytic activities of the two compounds were enhanced about twice when a suitable amount of 1-hexene comonomer is present in the feed. The copolymerization of ethylene with 1-hexene revealed a noticeable influence of the type of bridge on the relative reactivity of the 1-hexene. ¹³C-NMR analysis of copolymers showed that compound 1 is characterized by lower r_E, taken as an index of ethylene reactivity, and higher reactivity of 1-hexene. The bridge also affects the distribution of the 1-hexene along the copolymer chain, investigated through their product of reactivity ratios, r_Er_H. The thermal properties and the density of copolymers were not affected by the type of bridge of the metallocenes, but mainly depended on 1-hexene content in the copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2763–2772, 1999     

Synergistic Effects of the ZnCl2-SiCl4 Modified TiCl4 /MgCl2 /THF Catalytic System on Ethylene/1-Hexene and Ethylene/1-Octene Copolymerizations简

The copolymerizations of ethylene with 1-hexene or 1-octene by using TiCl4 /MgCl2 /THF catalysts modified with different metal halide additives(ZnCl2, SiCl4, and the combined ZnCl2-SiCl4) were investigated based on catalytic activity and copolymer properties. It was found that the catalyst modified with mixed ZnCl2-SiCl4 revealed the highest activities for both ethylene/1-hexene and ethylene/1-octene copolymerization. The increase in activities was due to the formation of acidic sites by modifying the catalysts with Lewis acids. Based on the FTIR measurements, the characteristic C―O―C peaks of the catalysts modified with metal halide additives were slightly shifted to lower wavenumber when compared to the unmodified catalyst. This showed that the modified catalysts could generate more acid sites in the TiCl4 /MgCl2 /THF catalytic system leading to an increase in activities as well as comonomer insertion(as proven by13C-NMR). However, Lewis acidmodifications did not affect the microstructure of the copolymers obtained. By comparison on the properties of copolymers prepared with the unmodified catalyst, it was found that polymers with ZnCl2 and/or SiCl4 modification exhibited a slight decrease in melting temperature, crystallinity and density. It is suggested that these results were obtained based on the different amount of α-olefins insertion, regardless of the types of Lewis acids and comonomer.     

Microstructure analysis of ethylene/1-hexene co-polymers with embeddedrac-Et[Ind]2ZrCl2 metallocene catalyst

Co-polymerization of ethylene and 1-hexene usingrac-Et[Ind]₂ZrCl₂/MAO catalyst embedded in polystyrene in liquid slurry process was examined. The embedded catalyst was prepared by polymerizing a small amount of styrene. The specific activities and bulk densities of the copolymers produced by the embedded catalyst were higher than those of the homogeneous catalyst. The produced co-polymer with embedded catalyst had more random distribution of 1-hexene at the similar co-monomer content than that with homogeneous catalyst.     

Copolymerization of ethylene and 1-hexene with TiCl4/MgCl2 catalysts modified by 2,6-diisopropylphenol

A supported TiCl4/MgCl2 catalyst without internal electron donor (O-cat) was prepared firstly. Then it was modified by 2,6-diisopropylphenol to make a novel modified catalyst (M-cat). These two catalysts were used to catalyze ethylene/1-hexene copolymerization and 1-hexene homopolymerization. The influence of cocatalyst and hydrogen on the catalytic behavior of these two catalysts was investigated. In ethylene/1-hexene copolymerization, the introduction of 2,6-iPr2C6H3O-groups did not deactivate the supported TiCl4/MgCl2 catalyst. Although the 1-hexene incorporation in ethylene/1-hexene copolymer prepared by M-cat was lower than that prepared by O-cat, the composition distribution of the former was narrower than that of the latter. Methylaluminoxane (MAO) was a more effective activator for M-cat than triisobutyl-aluminium (TIBA). MAO led to higher yield and more uniform chain structure. In 1-hexene homopolymerization, the presence of 2,6-iPr2C6H3O-groups lowered the propagation rate constants. Two types of active centers with a chemically bonded 2,6-iPr2C6H3O-group were proposed to explain the observed phenomena in M-cat.     

Studies on the phase structure of ethylene‐vinyl acetate copolymers by solid‐state 1H and 13C NMR

The phase structure of a series of ethylene‐vinyl acetate copolymers has been investigated by solid‐state wide‐line ¹H NMR and solid‐state high‐resolution ¹³C NMR spectroscopy. Not only the degree of crystallinity but the relative contents of the monoclinic and orthorhombic crystals within the crystalline region varied with the vinyl acetate (VA) content. Biexponential ¹³C NMR spin–lattice relaxation behavior was observed for the crystalline region of all samples. The component with longer ¹³C NMR spin–lattice relaxation time (T₁) was attributed to the internal part of the crystalline region, whereas the component with shorter ¹³C NMR T₁ to the mobile crystalline component was located between the noncrystalline region and the internal part of the crystalline region. The content of the mobile crystalline component relative to the internal part of the crystalline region increased with the VA content, showing that the ¹³C NMR spin–lattice relaxation behavior is closely related to the crystalline structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2199–2207, 2002     

Poly(ethylene terephthalate) copolymers containing 5‐nitroisophthalic units. II. Crystallization studies

The microstructure and crystallization behavior of a set of poly(ethylene terephthalate‐co‐5‐nitroisophthalate) copolymers (PETNI) containing 5‐nitroisophthalic units in the 10–50 mol % range were examined and compared to those of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐isophthalate) (PETI) copolymers. A ¹³C NMR analysis of PETNI copolymers in a trifluoroacetic acid solution indicates that they are random copolymers with average sequence lengths in accordance with ideal polycondensation statistics. Differential scanning calorimetry (DSC) studies show that PETNI containing 5‐nitroisophthalic units up to 20 mol % are able to crystallize and that crystallization takes place in these copolymers at much slower rates than in PET. Wide‐angle X‐ray diffraction from powder and fibers reveals that crystallizable PETNI adopts the same triclinic crystal structure as PET, with the nitroisophthalate units being excluded from crystallites. Fourier transform infrared in combination with cross‐polarization/magic‐angle spinning ¹³C NMR spectroscopy demonstrates the occurrence of a gauche–trans conversion encompassing the crystallization process. A correlation between DSC and spectroscopic data leads us to conclude that the content of trans conformer in the noncrystallized phase of PETNI is higher than in both PET and PETI copolymers and suggests that secondary crystallization in the homopolymer must proceed by a mechanism different than that in copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1553–1564, 2001     

Study on poly(oxybenzoate-p-trimethylene terephthalate) copolymer

This study examined copolymers synthesized from poly(trimethylene terephthalate) (PTT) and p-acetoxybenzoic acid using solution proton nuclear magnetic resonance (NMR) spectroscopy. Proton NMR spectra showed that these p-oxybenzoate (POB)/PTT copolyesters were almost random copolymers because the preference factor of POB bonded to another POB unit in these copolyesters is close to 1.0 with a POB content between 20 and 80 mol%.The melting and crystallization behaviors of these copolyesters were studied by differential scanning calorimetry (DSC). In the heating DSC scan of the POB rich composition, the endothermic peak is weaker because the enthalpy of fusion decreased due to a melting transition from a crystalline to anisotropy liquid state. Thermogravimetric analysis results indicated that the decomposition temperature (T_d) increased with POB content. The crystalline morphology of the copolyester was further investigated with a polarized optical microscope, indicating that the POB/PTT copolyesters with 60 mol% POB are highly anisotropic in the liquid state.     

Composition-dependent crystallization behavior of copolyperoxides from methyl methacrylate and 4-vinylbenzyl stearate

To study the composition-dependent crystallization behavior of copolyperoxides, herein a series of copolymers were prepared by varying the ratios of methyl methacrylate (MMA) and 4-vinylbenzyl stearate (VBS) under 100 psi oxygen pressure using AIBN as an initiator at 50°C in toluene. Both ¹³C NMR and electron impact mass spectroscopy (EI-MS) approved an alternative placement of either of the monomer and peroxy (–O–O–) links throughout the polymer chain. Thermal stability of the resulting copolyperoxides was investigated by thermogravimetric analysis (TGA) and the degradation fragments have been recognized from EI-MS study. In addition, differential scanning calorimetry (DSC) displayed an endothermic peak as well as an exotherm associated with the melting of the side chain crystalline domains and degradation of –O–O– links in the polymer main chain, respectively. Furthermore, DSC thermograms unveiled a systematic decrease of the crystalline melting temperature (T_m) with the enhancement of MMA content in the copolymers. Small angle X-ray scattering (SAXS) revealed the existence of lamellar morphology (depends on VBS content in the copolyperoxide) in the synthesized polyperoxide materials, further supported by atomic force microscopy (AFM) analysis showing a layered fibrillar assembly with multiple heights of the lamella. The significant crystalline nature of the polyperoxides was further evidenced from the appearance of lattice fringes in the transmission electron microscope (TEM) micrographs. The crystalline morphology with birefringent texture was further evidenced from the polarized optical microscopy (POM) study. Thus, the present study reported the effective variation of crystalline behavior in copolyperoxide materials with the incorporation of MMA units in the copolyperoxide chains.     

新型高效催化剂乙烯／1—丁烯气相齐聚和共聚制摆弹性体？…

用新型催化体系ＴｉＣｌ４,Ｔｉ（ＯＢｕ）４／ＭｇＣｌ２,ＳｉＯ２和ＺｎＣｌ２／醇／ＡＩＲ３催化乙烯与１－丁烯气均聚及共聚,制得两种共聚物弹性体,发现新型催化剂体系具有独特的齐聚和原位共聚性能,采用＾１３ＣＮＭＲ测定了共聚物链序列分布结构,观察到共聚单体在聚合物链中分布不均匀,存在较长的乙烯链段和较多的１－丁烯嵌段,产物ＤＳＣ谱图表现出复杂的结构熔融行为,存在多种结晶形态,出现熔融肩峰及双峰,怀通常     

Dynamic DSC,SAXS and WAXS on homogeneous ethylene-propylene and ethylene-octene copolymers with high comonomer contents

Ethylene-propylene (EP) and ethylene-octene (EO) copolymers polymerized with the aid of homogeneous vanadium and metallocene catalysts were compared by DSC and time-resolved simultaneous SAXS-WAXS-DSC at scanning rates of 10 and 20°C min^?1 using synchrotron radiation. An EP copolymer with a density of 896 kg m^?3 (about 89 mol % ethylene) after compression moulding gave orthorhombic WAXS reflections. The crystallinity as a function of temperature [w ^c (T)] calculated from these reflections using the two-phase model was in good agreement withw ^c (T) calculated fromc _p measurements using DSC. Thec _p measurements also enabled calculation of the baselinec _p and the excessc _p. The SAXS measurements revealed a strong change in the long period in cooling and in heating. The SAXS invariant as a function of temperature showed a maximum in both cooling and heating, which could be explained from the opposing influences of the crystallinity and the electron density difference between the two phases. Two EO copolymers with densities of about 871 kg m^?3 (about 87 mol% ethylene) no longer showed any clear WAXS reflections, although DSC and SAXS measurements showed that these copolymers did crystallize. The similarity between the results led to the conclusion that the copolymers, though based on different catalyst systems — vanadium and metallocene — did not have strongly different sets of propagation probabilities of chain growth during polymerization. On the basis of a Monte Carlo simulation model of crystallization and morphology, based on detailed knowledge of the microchain structure, the difference between WAXS on the one hand and DSC and SAXS on the other could be explained as being due to loosely packed crystallized ethylene sequences in clusters. These do cause the density and the electron density of the cluster to increase (which is measurable by SAXS) and the enthalpy to decrease (which is measurable by DSC) but the clusters are too small and/or too imperfect to give constructive interference in the case of WAXS. Of an EP copolymer with an even lower ethylene content (about 69 mol %), the crystallization and melting processes could still be readily measured by DSC and SAXS, which proves that these techniques are eminently suitable for investigating the crystallization and melting behaviour of the copolymers studied.     

Energetic potential and kinetic behavior of peats

The miscibility of blends of isotactic polypropylene and propylene-1-hexene (PH) copolymers with 11 and 21 mol% of 1-hexene (PH11 and PH21, respectively) has been studied theoretically and using DSC, DMA, and AFM techniques. Using experimental PVT data, the solubility parameter approach leads to a critical difference in 1-hexene content for melt miscibility of 17 mass% (~11 mol%) at 200 °C and 0.1 MPa. The theoretical window for miscibility is in close agreement with thermal properties of the blends. The glass transition (T _g) of miscible blends (iPP/PH11 and PH11/PH21) decreases proportionally to the content of PH having the lowest T _g, while immiscible blends (iPP/PH21) display invariable T _g with blend composition. The same trend was extracted from the analysis of the β-relaxation by dynamic mechanical analysis. Room temperature AFM images of blends quenched from 200 °C into liquid nitrogen confirm phase segregation of iPP/PH21 in domains of 1–5 microns, while the AFM images of iPP/PH11 and PH11/PH21 lack any obvious signature of phase separation prior to crystallization.