聚合物层状组装膜

介绍了近几年来我们研究组在层状组装膜的构筑以及功能化研究方面取得的一些最新进展.包括结合表面溶胶-凝胶技术与静电层状组装技术,实现了二阶非线性基团在层状组装多层膜中的非对称排列,制备了具有二阶非线性效应的膜材料;采用室温压印技术,发展了一种简便、经济和具有普适性的层状组装聚合物膜图案化方法;以轻度交联的聚合物微凝胶为构筑基元,制备了具有高负载量的聚合物层状组装膜;发展了一种基于离子剥离技术的层状组装自支持膜制备方法;基于层状组装技术,制备了具有超疏水和抗反射功能的涂层.     

聚(对乙烯基苯酚)的合成及其与重氮树脂的氢键自组装研究

带相反电荷的聚电解质,交替沉积在基片,形成超薄有序膜,通常称为静电自组装,自1991年由Decher首次阐明以来,静电自组装技术引起了广泛重视,利用氢键相互作用的氢键自组装1997年才有报道,沈家骢、张希等从聚丙烯酸和聚乙烯基吡啶通过氢键组装了有序超薄膜。和乙烯基吡啶通过氢键组装超薄膜的制备。由于静电力和氢键均很弱,此类膜对极性溶剂不稳定,如在DMF中会离解而遭破坏,我们曾报道重氮树脂（DR）与酚醛树脂间通过氢键的自组装,本文报道聚（对乙烯基苯酚）（PVPh）的制备及春与重氮树脂（DR）间的氢键相经作用,并结合光照,制备了对极性溶剂稳定的超薄膜。     

Self-assembled graphene/azo polyelectrolyte multilayer film and its application in electrochemical energy storage device

Graphene/azo polyelectrolyte multilayer films were fabricated through electrostatic layer-by-layer (LbL) self-assembly, and their performance as electrochemical capacitor electrode was investigated. Cationic azo polyelectrolyte (QP4VP-co-PCN) was synthesized through radical polymerization, postpolymerization azo coupling reaction, and quaternization. Negatively charged graphene nanosheets were prepared by a chemically modified method. The LbL films were obtained by alternately dipping a piece of the pretreated substrates in the QP4VP-co-PCN and nanosheet solutions. The processes were repeated until the films with required numbers of bilayers were obtained. The self-assembly and multilayer surface morphology were characterized by UV-vis spectroscopy, AFM, SEM, and TEM. The performance of the LbL films as electrochemical capacitor electrode was estimated using cyclic voltammetry. Results show that the graphene nanosheets are densely packed in the multilayers and form random graphene network. The azo polyelectrolyte cohesively interacts with the nanosheets in the multilayer structure, which prevents agglomeration of graphene nanosheets. The sheet resistance of the LbL films decreases with the increase of the layer numbers and reaches the stationary value of 1.0 × 10(6) Ω/square for the film with 15 bilayers. At a scanning rate of 50 mV/s, the LbL film with 9 bilayers shows a gravimetric specific capacitance of 49 F/g in 1.0 M Na(2)SO(4) solution. The LbL films developed in this work could be a promising type of the electrode materials for electric energy storage devices.     

Halogen bonding as a new driving force for layer-by-layer assembly

A new approach for fabricating a layer-by-layer polymer film was explored, which was based on the halogen bonding between poly(4-(4-iodo-2,3,5,6-tetrafluorophenoxy)-butyl acrylate) and poly(4-vinylpyridine). Layer-by-layer assembly of two polymers was confirmed by UV-vis spectroscopy and quartz crystal microbalance measurements. The interaction between the two polymers was identified as halogen bonding by X-ray photoelectron spectroscopy. The surface of the multilayer film is flat, and the thickness of one bilayer is about 1.3 nm. We also compared the stability of a halogen-bonded multilayer film in methanol with that of a hydrogen-bonded multilayer film.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

双网络增强自支撑多层膜的制备

通过石英晶体微天平(QCM)研究不同最外层对单体、交联剂、引发剂扩散入多层膜的结果显示,聚乙烯亚胺( PEI)为最外层的多层膜更有利于负电荷分子扩散.将(聚乙烯亚胺/聚丙烯酸)12-聚乙烯亚胺[( PEI/PAA)12-PEI]多层膜浸入带有单体、引发剂、交联剂的溶液后,经过光聚合交联与热交联后可形成自支撑膜.XPS数...     

The Electrochemical Characteristics of Multilayer Assembly of Hemoglobin and Polystyrene Sulfonate at Self-assembled Monolayer Surface

It was well known that protein interacted strongly with natural and syntheticpolyelectrolytes mainly through electrostatic forces to form a complex. These forces maylead to the formation of amorphous precipitates, protein assembly by the alternatelyelectrostatic adsorption immobilize protein can be formed a multilayer filml'2. Bypreparation of anisotropic protein layer and precise control of the distance of active layer,sequential reaction and vectorial transfer of electron and energy become f…     

重氮树脂与牛血清白蛋白共价结合自组装膜及其表面细胞培养

细胞支架作为组织工程的组成部分为细胞生长提供了最佳微环境 ,并对细胞生长与功能进行控制 .由于细胞对支架表面的生物识别是细胞附着、生长和增殖的基本前提 ,所以对材料表面的功能化是一个重要的课题 [1,2 ] . Shoichet等 [3 ] 通过化学反应或等离子体处理的方法 ,将蛋白质引入到材料表面而使其功能化 .基片在两种带有相反电荷的聚电解质溶液中交替吸附 ,其表面形成致密有序的超薄自组装膜 ,这种层 -层自组装技术不仅制备方法简单 ,无需特殊的设备 ,而且对膜组成和厚度能随意调控 ,以水为介质 ,对环境友好 [4～ 6] ,无疑是一项重要的表…     

一种新型的氢键自组装液晶光控取向膜

报道了一种新型的以氢键为驱动力的液晶自组装光控取向膜, 研究了薄膜的制备方法与光敏特性. 通过聚(4-乙烯基吡啶)中的吡啶基团与光敏聚丙烯酰氧基肉桂酸间的氢键作用制备了LBL(layer-by-layer)型的自组装多层膜, 制备过程的紫外-可见光谱表明, 该组装过程为逐层、均匀沉积过程. 傅里叶变换红外光谱表明, 多层膜的成膜驱动力为氢键. 用线性偏振紫外光辐照该薄膜, 多层膜中与光矢量方向匹配的光敏基团发生[2+2]环加成反应, 形成表面张力各向异性的薄膜. 用该薄膜作为向列相液晶的取向膜制成平行液晶器件, 在偏光显微镜下观察, 发现获得了均一、稳定的取向效果.     

The suspension�Cemulsion combined polymerization of fluorinated acrylic monomer and the fluorinated latex film surface properties

The perfluoroacrylate-containing copolymer composite particles were fabricated by suspension?Cemulsion combined polymerization (SECP). The features and formation mechanism of resulting polymer particles in SECP were studied. The fluorinated latexes with better stability and those fluorinated films with high surface fluorine content were prepared by SECP using fluorine-free surfactants as an emulsifying agent, and the surface natures of the fluorinated films were characterized. It was found that P(MMA?CBA) latex particles gradually coagulated with P(PFA?CBA) particles after adding emulsion polymerization constituents at the midstage of the suspension polymerization, and fluorinated composite particles with core?Cshell structure and larger size were obtained. The fluorine contents either on the film surface or in the bulk of the film and the films from SECP are higher than those from miniemulsion polymerization at high PFA feed ratio (more than 20?wt.%). The model of PFA?CMMA?CBA SECP was proposed according to the variations of particle features of the composite particles.     

煅烧温度对阳极氧化WO3多孔薄膜的形貌及光电化学性能的影响

采用一步式阶跃电压加压方法,在NH4F/(NH4)2SO4电解质溶液中对W片进行阳极氧化处理制备了WO3多孔薄膜,通过后续热处理温度的控制,制备了性能规律性变化的WO3多孔纳米薄膜材料.用场发射扫描电镜(FE-SEM)、X射线衍射(XRD)分析等手段考察了热处理温度对氧化钨晶体结构和形貌影响的规律,在450°C以下的煅烧温度下,薄膜保持50-100nm孔径;通过对光电化学性质、光催化降解甲基橙动力学行为的研究,考察了不同热处理温度对WO3多孔薄膜光电转换性能影响的规律.研究表明,450°C煅烧处理后的WO3薄膜在500W氙灯光源照射及1.2V偏压下,光电流密度达到5.11mA·cm-2;340及400nm单色光辐射下光电转换效率(IPCE)值分别达到87.4%及22.1%.电化学交流阻抗谱显示,450°C煅烧处理后的WO3薄膜表现出最佳的导电率及最小的界面电荷转移电阻.实验结果证明,高结晶度的多孔结构是WO3薄膜具有高光电转换效率的主要因素,控制热处理温度是实现薄膜具有高孔隙率、完整结晶度、低电阻的重要手段.     

A novel biological active multilayer film based on polyoxometalate with pendant support-ligand

A novel nanosized biological active multilayer film composed of polyoxometalate (POM) anion α-[SiW₁₁O₃₉Co(H₂PO₄)]⁷⁻(abbr. SiW₁₁Co-PO₄) and poly(diallyldi methylammonium chloride) (abbr. PDDA) was fabricated by layer-by-layer self-assembly (LBL). The composition and growth processes of the films have been determined by X-ray photoelectron spectra (XPS) and ultraviolet-visible absorption spectra (UV). The composite film was formed by the alternate adsorption of SiW₁₁Co-PO₄ and PDDA, and the deposition process was quantitative and highly reproducible from layer to layer. The morphology of the film was studied by atomic force microscopy (AFM), which showed that the film was relatively uniform and smooth, and POM anions aggregated into nanoclusters distributing on the surface uniformly. The film exhibited favorable electrochemical behavior of POM indicated by cyclic voltammetry (CV). The film can immobilize the DNA molecules via Mg²⁺-bridging medium.     

Layer-by-layer deposited organic/inorganic hybrid multilayer films containing noncentrosymmetrically orientated azobenzene chromophores

Organic/inorganic hybrid multilayer films with noncentrosymmetrically orientated azobenzene chromophores were fabricated by the sequential deposition of ZrO2 layers by a surface sol-gel process and subsequent layer-by-layer (LbL) adsorption of the nonlinear optical (NLO)-active azobenzene-containing polyanion PAC-azoBNS and poly(diallyldimethylammonium chloride) (PDDA). Noncentrosymmetric orientation of the NLO-active azobenzene chromophores was achieved because of the strong repulsion between the negatively charged ZrO(2) and the sulfonate groups of the azobenzene chromophore in PAC-azoBNS. Regular deposition of ZrO(2)/PAC-azoBNS/PDDA multilayer films was verified by UV-vis absorption spectroscopy and quartz crystal microbalance measurements. Both UV-vis absorption spectroscopy and transmission second harmonic generation (SHG) measurements confirmed the noncentrosymmetric orientation of the azobenzene chromophores in the as-prepared ZrO2/PAC-azoBNS/PDDA multilayer films. The square root of the SHG signal (I(2omega)(1/2)) increases with the increase of the azobenzene graft ratio in PAC-azoBNS as the number of deposition cycles of the ZrO(2)/PAC-azoBNS/PDDA films remains the same, while the second-order susceptibility chi(zzz)(2) of the film decreases with the increase of the azobenzene graft ratio. Furthermore, the present method was successfully extended to realize the noncentrosymmetric orientation of azobenzene chromophores in multilayer films when small organic azobenzene compounds with carboxylic acid and/or hydroxyl groups at one end and sulfonate groups at the other end were used. The present method was characterized by its simplicity and flexibility in film preparation, and it is anticipated to be a facile way to fabricate second-order nonlinear optical film materials.     

Effects of film structure on electrochromic properties of the multilayer films containing polyoxometalates

Multilayer films of tungstophosphate anion (P₂W₁₈) and poly(allylamine hydrochloride) (PAH) were fabricated on quartz and ITO substrates by layer-by-layer self-assembly method. These films were characterized by UV–vis spectroscopy, cyclic voltammetry (CV), chronoamperometric (CA), chronocoulometry (CC) and atomic force microscopy (AFM). The effects of film structure on multilayer electrochromic properties were investigated. The electrochromic responses of the composite films were related to the surface coverage of anion and multilayer thickness. It was found that higher concentration of polycation and anion, or adding salt to the polycation solution used for multilayer film preparation led to thicker and denser film structure which improved optical contrast and coloration efficiency whereas prolonged response time.     

Layer-by-layer deposition of rhenium-containing hyperbranched polymers and fabrication of photovoltaic cells

Multilayer thin films were prepared by the layer-by-layer (LBL) deposition method using a rhenium-containing hyperbranched polymer and poly[2-(3-thienyl)ethoxy-4-butylsulfonate] (PTEBS). The radii of gyration of the hyperbranched polymer in solutions with different salt concentrations were measured by laser light scattering. A significant decrease in molecular size was observed when sodium trifluoromethanesulfonate was used as the electrolyte. The conditions of preparing the multilayer thin films by LBL deposition were studied. The growth of the multilayer films was monitored by absorption spectroscopy and spectroscopic ellipsometry, and the surface morphologies of the resulting films were studied by atomic force microscopy. When the pH of a PTEBS solution was kept at 6 and in the presence of salt, polymer films with maximum thickness were obtained. The multilayer films were also fabricated into photovoltaic cells and their photocurrent responses were measured upon irradiation with simulated air mass (AM) 1.5 solar light. The open-circuit voltage, short-circuit current, fill factor, and power conversion efficiency of the devices were 1.2 V, 27.1 mu A cm(-2), 0.19, and 6.1x10(-3) %, respectively. The high open-circuit voltage was attributed to the difference in the HOMO level of the PTEBS donor and the LUMO level of the hyperbranched polymer acceptor. A plot of incident photon-to-electron conversion efficiency versus wavelength also suggests that the PTEBS/hyperbranched polymer junction is involved in the photosensitization process, in which a maximum was observed at approximately 420 nm. The relatively high capacitance, determined from the measured photocurrent rise and decay profiles, can be attributed to the presence of large counter anions in the polymer film.     

Identification of Skim Milk Electroacidification Fouling: A Microscopic Approach

The self-assembly film fabricated via the layer-by-layer technique was studied by the dynamic contact angle (DCA) method (wilhelmy plate method). The used polyelectrolytes are poly(diallyl-dimethylammonium chloride) (PDDA), poly(etheleneimine) (PEI), diphenylamine-4-diazonium-formaldehyde resin (DR), 2-nitro-N-methyl-4-diazonium-formaldehyde resin (NDR), and poly(sodium-p-styrenesulfonate) (PSS). For the self-assembly systems of PDDA/PSS, PEI/PSS, DR/PSS, and NDR/PSS, their individual contact angle fluctuates regularly with the fabrication of each layer, while the magnitude of different systems' contact angle depends on the participant polycation. The re-organization of components and the adjacent layer interpenetration are presented here to explain this phenomena. We also found that DR or NDR can adsorb itself via the layer-by-layer method to form multilayer film, and the hydrophobic interaction is put forward to effect this process. Moreover, the procedure of washing and drying after adsorption was studied and considered as a prerequisite for the successful fabrication, especially of the same charge carried components. Copyright 2001 Academic Press.     

钯/聚苯胺纳米多层膜的制备及对抗坏血酸和多巴胺的催化氧化

采用脉冲电位法(PPSM)结合聚苯胺(PANI)的层层自组装制备了Pd/PANI交替沉积纳米多层膜, 并用于抗坏血酸(AA)和多巴胺(DA)的检测. 实验发现, 多层膜结构形貌及催化性能受前躯体K₂PdCl₆浓度、 脉冲条件及膜厚度等影响. 当K₂PdCl₆浓度为2×10^-3 mol/L, 阴极脉冲电位为-0.3 V, 阶跃次数为17时, 5层Pd/PANI修饰玻碳电极对AA和DA的催化性能最佳; 在0.1 mol/L磷酸盐缓冲液中, AA和DA的氧化峰明显分离[ΔE_p(AA, DA)=160 mV], 其峰电流与浓度分别在5×10^-5～4×10^-4和4×10^-5～1×10^-4 mol/L范围内呈较好线性关系, 实现了对AA和DA的同时测定. 该修饰电极具有良好的抗干扰性和稳定性.     

Electrochemical behavior and luminescent properties of a multilayer film containing mixed-addenda polyoxometalates K10H3[Eu(SiMo9W2O39)2] and tris(2,2'-bipyridine)ruthenium(II)

Inorganic-organic composite films containing the mixed-addenda heteropolytungsto-molybdate K(10)H(3)[Eu(SiMo(9)W(2)O(39))(2)]xH(2)O (abbreviated as EuSiMo(9)W(2)) and tris(2,2'-bipyridine)ruthenium(II) Ru(bpy)(2+)(3) (abbreviated as Ru(bpy)(3)) were fabricated by the layer-by-layer self-assembly method. UV-vis spectroscopy shows that the absorbance values at characteristic peaks increase linearly with the number of EuSiMo(9)W(2)/Ru(bpy)(3) bilayers, suggesting that the deposition process is linear and highly reproducible from layer to layer. The composition of the multilayer film was measured by X-ray photoelectron spectra. Atomic force microscopy presented a correspondingly uniform surface morphology and a homogeneity of the multilayer films. The film exhibited photoluminescence arising from the d-pi* metal-to-ligand transition of Ru(2+), and (5)D(0) metastable state to terminate levels in the (7)F(J) (J=0-4) ground-state multiplet transitions of Eu(3+). The film also exhibited catalytic activities toward the reduction of IO(-)(3), H(2)O(2), BrO(-)(3), NO(-)(2) and the oxidation of C(2)O(2-)(4). It may provide a novel material as bifunctional electrocatalysts and fluorescence probes in biochemistry, luminescence sensors, electroluminescent optical devices, and so on.     

Fabrication of an ESA Multilayer Film from a Diazo Resin by Direct Surface Charge Reversal

An electrostatic self‐assembly (ESA) multilayer film of a diazo resin (DR) was fabricated by direct surface charge reversal. DR is first adsorbed onto the substrate via electrostatic interaction, and in the chemical activation step, the sign of the surface charge is directly reversed by converting the positively charged diazonium ion to the negatively charged diazo sulfonate ion under mild conditions. By repeating adsorption and chemical activation step, the film grows regularly layer by layer.     

一种卤键高分子多层膜的层层组装及其稳定性的提高

设计合成了聚甲基丙烯酸2-(4-碘-2,3,5,6-四氟苯氧基)乙酯( PIPEMA)和聚甲基丙烯酸3-(3-吡啶基)丙酯( PPyPMA),经过层层组装和随后的紫外可见光谱的检验,发现可以在丙酮和丁酮中组装PIPEMA/PPyPMA卤键多层膜,但是当以四氢呋喃(THF)或氯仿为组装溶剂时未能获得多层膜.另外,在丁酮中...