亚烷基卡宾与丙烯环加成反应机理的理论研究

用二阶微扰理论研究了单重态亚烷基卡宾与丙烯环加成反应的机理，采用 MP2/6-31G~*方法计算了势能面上各驻点的构型参数、振动频率和能量。根据所得 势能面上的能量数据可以预言，反应（1）的a途径和反应（2）的b途径将是单重态 亚烷基卡宾与丙烯环加成反应的两条相互竞争的主反应通道，两反应途径均由两步 组成，(I)两反应物分别生成了富能中间体INT1a和INT2b，它们均是无势垒的放热 反应，放出的能量分别为60.28和26.33kJ·mol~(-1).(II)中间体INT1a和INT2b分 别通过过渡态TS1a和TS2b异构化为三元环产物P1和四元环产物P2，其势垒分别为 16.43和12.73kJ·mol~(-1)。     

二氟亚烷基卡宾与甲醛环加成反应机理的理论研究

用二阶微扰理论研究单重态二氟亚烷基卡宾与甲醛发生的环加成反应机理,采用MP2/6-31G^*方法计算了势能面上各驻点的构型参数、振动频率和能量.结果表明,单重态二氟亚烷基卡宾与甲醛的环加成反应主要有两种反应通道,通道1中,两个反应物经a,b和c三条反应途径生成三元环构型的产物P1,其中途径c是主反应途径,该途径有两步组成:(Ⅰ)二氟亚烷基卡宾与甲醛生成了1个富能中间体(INT1c),是无势垒放热反应,放出能量为219.18kJ/mol;(Ⅱ)中间体(INT1c)异构化为产物二氟亚烷基环氧乙烷,其势垒为134.71kJ/mol.通道2的反应途径由三步组成:(Ⅰ)反应物首先生成了1个富能中间体(INT1b),为无势垒的放热反应,放出的能量142.77kJ/mol;(Ⅱ)中间体(INT1b)异构化成另一中间体(INT2),其势垒为22.31kJ/mol;(Ⅲ)中间体(INT2)异构化成四元环构型产物P2,其势垒为11.98kJ/mol.     

单重态二溴卡宾和甲醛环加成反应的量化研究

采用量子化学密度泛函理论,研究了单重态二溴卡宾和甲醛环加成反应的机理.在B3LYP/6-31G*基组水平上,优化得到了反应途径上反应物、过渡态、中间体和产物的几何构型;计算并考察了四种可能反应途径势能面上各驻点的构型参数、振动频率和能量;通过振动分析对过渡态和中间体构型进行了确认.计算结果表明,二溴卡宾和甲醛反应有四条反应通道,其中c反应通道(即0°-0°型)控制步骤的活化能仅为13.7 kJ·mol－1,反应容易进行.     

硅烯与甲醛环加成反应的理论研究

本文用RHF/6-31G^*解析梯度方法研究了单重态硅烯与甲醛环加成反应的机理,用二级微扰方法对各构型的能量进行了相关能校正,并用统计热力学方法和过渡态理论计算了该反应在不同温度下的热力学函数的变化和动力学性质。结果表明,此反应历程由两步组成:1)硅烯与甲醛生成一中间配合物,是一无势垒的放热反应,2)中间配合物异构化为产物,此步势垒经零点能校正后只有51.4kJ·mol^-^1(MP2/6-31G^*//6-31G^*);从热力学和动力学的综合角度考虑,该反应在300～400K温度下进行为宜,如此,反应既有较大的自发趋势和平衡常数,又具有较快的反应速率。     

二氯硅烯与乙烯和甲醛环加成反应机理的理论研究

用RHF/6-31G^*解析梯度方法研究了单重态二氯硅烯与乙烯和甲醛环加成反应的机理,并用二级微扰方法对各构型能量进行了相关能校正.结果表明,两反应历程均由两步组成:(1)二氯硅烯与乙烯和甲醛分别生成了中间配合物,是无势垒的放热反应;(2)中间配合物异构化成产物二氯硅杂环丙烷和二氯硅杂环氧甲烷,其势垒经零点能校正分别为97.43和103.29kJ/mol(MP₂/6-31G^*//6-31G^*).     

卡宾与醚C-H键插入反应的理论研究——(Ⅰ)卡宾与二甲醚的插入反应

用量子化学从头计算方法在MP2/6-31G(d)水平上计算了单重态的CH₂与二甲醚中C-H键插入反应的过程,并在MP₄/6-31G(d)水平上计算了反应物、过渡态和产物的能量。反应仅具有一个8.1kJ/mol的早期势垒,反应过程是卡宾的一个亲电-亲核过程,在插入过程中,卡宾空的p轨道和占有一对孤电子的σ轨道分别指向C-H键的H原子和C原子。     

锗烯与乙烯环加成反应的理论研究

用RHF/6-31G^*解析梯度方法研究了单重态锗烯与乙烯环加成反应的机理,用二级微扰方法对各构型的能量进行了相关能校正,并用统计热力学方法和过渡态理论计算了该反应在不同温度下的热力学函数的变化和动力学性质。结果表明,此反应历程由两步组成:1)锗烯与乙烯生成了一中间配合物,是一无势垒的放热反应,2)中间配合物异构化为产物锗杂环丙烷,此步势垒经零点能校正后为26.9kJ.mol^-^1(MP2/6-31G^*//6-31G^*);从热力学和动力学的综合角度考虑,该反应在200-300K温度下进行为宜,如此,反应既有较大的自发趋势和平衡常数,又具有较快的反应速率。     

咪唑与单线态氧(1O2)1,2-环加成反应的理论研究

采用较新的半经验分子轨道方法Austin Model 1(简称AM1方法), 辅以Berny梯度优化方法, 对单线态氧(~1O_2)与咪唑的1,2-环加成反应,进行了理论研究。计算获得实验尚未检测到的4,5-二氧环丁烷(4,5-dioxetane)的结构, 并在反应势能面上找到单重态双自由基中间体及通过该中间体的两步反应的过渡态。通过对过渡态的结构特征、虚振动方向以及对反应过程的电荷分布情况、轨道相互作用等的分析, 说明该反应是经由单重态双自由基中间体的分步反应。两步反应的活化势垒分别为39.2 kJ·mol~(-1)和150.5 kJ·mol~(-1)。     

单重态CCl2与O3反应机理的理论研究

用量子化学从头算方法,研究了单重态CCl_2与O_3反应的机理.在HF/6-31G(d)水平上用梯度解析技术全参数优化上述反应的反应物、中间体、过渡态和产物构型,MP2/6-31G(d)//HF/6-31G(d)方法计算能量.给出了有关化合物的结构数据.结果表明:CCl_2与O_3首先生成富能中间体CCl_2O_3,然后中间体裂解生成CCl_2O和O_2.该反应为强放热反应,放出的热量为516.88kJ·mol~(-1)[MP2/6-31G(d)//HF/6-31G(d)].通过内禀反应坐标(IRC)计算,获得了沿反应途径的势能剖面.     

咪唑与单线态氧(~1O_2)1,2-环加成反应的理论研究

采用较新的半经验分子轨道方法Austin Model 1(简称AM1方法),辅以Berny梯度优化方法,对单线态氧(~1O_2)与咪唑的1,2-环加成反应,进行了理论研究。计算获得实验尚未检测到的4,5-二氧环丁烷(4,5-dioxetane)的结构,并在反应势能面上找到单重态双自由基中间体及通过该中间体的两步反应的过渡态。通过对过渡态的结构特征、虚振动方向以及对反应过程的电荷分布情况、轨道相互作用等的分析,说明该反应是经由单重态双自由基中间体的分步反应。两步反应的活化势垒分别为39.2kJ·mol~(-1)和150.5kJ·mol~(-1)。     

Ab initio study on the mechanism of forming a silapolycyclic compound between silylidene and formaldehyde

The mechanism of the cycloaddition reaction of forming a silapolycyclic compound between singlet silylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6-31G* method. From the potential energy profile, it can be predicted that the cycloaddition reaction process of forming the silapolycyclic compound (P₂) for this reaction consists of four steps: (I) the two reactants first form a semi-cyclic intermediate INT1a through a barrier-free exothermic reaction of 32.5 kJ mol⁻¹; (II) this intermediate then isomerizes to an active four-membered ring intermediate INT1 via a transition state TS1a with an energy barrier of 30.8 kJ mol⁻¹; (III) INT1 further reacts with formaldehyde to form an intermediate INT2, which is also a barrier-free exothermic reaction of 30.1 kJ mol⁻¹; (IV) INT2 isomerizes to a silapolycyclic compound P₂ via a transition state TS2 with a barrier of 50.6 kJ mol⁻¹. Comparing this reaction path with other competitive reaction paths, we can see that this cycloaddition reaction has an excellent selectivity.     

Theoretical study of mechanism of cycloaddition reaction between dimethylmethylene carbene and formaldehyde

The cycloaddition mechanism of forming a polycyclic compound between singlet dimethylmethylene carbene(R1) and formaldehyde(R2) has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated with CCSD(T)//MP2/6‐31G* method. From the potential energy profile, it can be predicted that the dominant reaction pathway of the cycloadditional reaction between singlet dimethylmethylene carbene and formaldehyde consists of two steps: (1) the two reactants(R1, R2) firstly form an energy‐enricheded intermediate (INT1a) through a barrier‐free exothermic reaction of ΔE = 11.3 kJ/mol. (2) Intermediate (INT1a) then isomerizes to a three‐membered product (P1) via a transition state (TS1a) with an energy barrier of 20.0 kJ/mol. The dominant reaction has an excellent selectivity and differs considerably from its competitive reactions in reaction rate. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Theoretical study on the mechanism of cycloaddition reaction between dimethyl germylidene and formaldehyde

The cycloaddition mechanism of the reaction between singlet dimethyl germylidene and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated with CCSD (T)//MP2/6-31G* method. From the potential energy profile, we predict that the cycloaddition reaction between singlet dimethyl germylidene and formaldehyde has two dominant reaction pathways. First dominant reaction pathway consists of three steps: (1) the two reactants (R1, R2) firstly form an intermediate INT1a through a barrier-free exothermic reaction of 43.0 kJ/mol; (2) INT1a then isomerizes to a four-membered ring compound P1 via a transition state TS1a with an energy barrier of 24.5 kJ/mol; (3) P1 further reacts with formaldehyde(R2) to form a germanic heterocyclic compound INT3, which is also a barrier-free exothermic reaction of 52.7 kJ/mol; Second dominant reaction pathway is as following: (1) the two reactants (R1, R2) firstly form a planar four-membered ring intermediate INT1b through a barrier-free exothermic reaction of 50.8 kJ/mol; (2) INT1b then isomerizes to a twist four-membered ring intermediate INT1.1b via a transition state TS1b with an energy barrier of 4.3 kJ/mol; (3) INT1.1b further reacts with formaldehyde(R2) to form an intermediate INT4, which is also a barrier-free exothermic reaction of 46.9 kJ/mol; (4) INT4 isomerizes to a germanic bis-heterocyclic product P4 via a transition state TS4 with an energy barrier of 54.1 kJ/mol.     

Ab initio Study of Mechanism of Forming Germanic Hetero-Polycyclic Compound between Germylene Carbene (H2Ge=C: ) and Formaldehyde

The mechanism of the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has been investigated with MP2/6‐31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD (T)//MP2/6‐31G* method. From the potential energy profile, we predict that the cycloaddition reaction of forming germanic hetero‐polycyclic compound between singlet germylene carbene and formaldehyde has two competitive dominant reaction pathways. First dominant reaction pathway consists of four steps: (1) the two reactants (R1, R2) first form an intermediate (INT1) through a barrier‐free exothermic reaction of 117.5 kJ/mol; (2) intermediate (INT1) then isomerizes to a four‐membered ring compound (P2) via a transition state (TS2) with an energy barrier of 25.4 kJ/mol; (3) four‐membered ring compound (P2) further reacts with formaldehyde (R2) to form an intermediate (INT3), which is also a barrier‐free exothermic reaction of 19.6 kJ/mol; (4) intermediate (INT3) isomerizes to a germanic bis‐heterocyclic product (P3) via a transition state (TS3) with an energy barrier of 5.8 kJ/mol. Second dominant reaction pathway is as follows: (1) the two reactants (R1, R2) first form an intermediate (INT4) through a barrier‐free exothermic reaction of 197.3 kJ/mol; (2) intermediate (INT4) further reacts with formaldehyde (R2) to form an intermediate (INT5), which is also a barrier‐free exothermic reaction of 141.3 kJ/mol; (3) intermediate (INT5) then isomerizes to a germanic bis‐heterocyclic product (P5) via a transition state (TS5) with an energy barrier of 36.7 kJ/mol.     

Theoretical studies of mechanism of cycloaddition reaction between germylidene and formaldehyde

Mechanism of the cycloadditional reaction between singlet germylidene (R1) and formaldehyde (R2) has been investigated with MP2/6‐31G* method, including geometry optimization, and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by CCSD(T)//MP2/6‐31G* method. From the potential energy profile, it can be predicted that the dominant reaction pathway of the cycloadditional reaction between singlet germylidene and formaldehyde is reaction (4) , which consists of three steps: the two reactants (R1, R2) first form an intermediate INT1b through a barrier‐free exothermic reaction of 28.1 kJ/mol; this intermediate reacts further with formaldehyde (R2) to give an intermediate INT4, which is also a barrier‐free exothermic reaction of 37.2 kJ/mol; subsequently, the intermediate INT4 isomerizes to a heteropolycyclic germanic compound P4 via a transition state TS4, for which the barrier is 18.6 kJ/mol. The dominant reaction has an excellent selectivity and differs considerably from its competitive reactions in thermodynamic property and reaction rate. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Theoretical study of mechanism of cycloaddition reaction between singlet dichlorosilylene carbene (Cl<Subscript>2</Subscript>Si=C:) and formaldehyde

The mechanism of the cycloaddition reaction between singlet dichlorosilylene carbene (Cl₂Si=C:) and formaldehyde has been investigated with MP2/6-31G* method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. The energies of the different conformations are calculated by Zero-point energy and CCSD (T)//MP2/6-31G* method. From the potential energy profile, it can be predicted that the reaction has two competitive dominant reaction pathways. The first dominant reaction pathway consists of two steps: (1) the two reactants (R1, R2) firstly form a four-membered ring intermediate (INT4) through a barrier-free exothermic reaction of 387.9 kJ/mol; (2) intermediate (INT4) then isomerizes to H-transfer product (P4.2) via a transition state (TS4.2) with energy barrier of 4.7 kJ/mol. The second dominant reaction pathway as follows: on the basis of intermediate (INT4) created between R1 and R2, intermediate (INT4) further reacts with formaldehyde (R2) to form the intermediate (INT5) through a barrier-free exothermic reaction of 158.3 kJ/mol. Then, intermediate (INT5) isomerizes to a silicic bis-heterocyclic product (P5) via a transition state (TS5), for which the barrier is 40.1 kJ/mol.     

二氟硅烯与甲醛环加成反应机理的理论研究

The mechanism of the cycloadditohn reaction of singlet difluorosilylene with formaldehyde have been studied by RHF/6-311G* gradient method. The electron correlation energy corrections of energies for all the structures were computed using second-order Moller-Plesset perturbation theory(MP2). The results show that this reaction proceeds via two steps:1)Difluorosilylene and formaldehyde form an intermediate complex, it is an exothermal reaction with no barrier.2) The intermediate complex isomerizes to form the product, after being corrected by zero-point energies, the barrier is 127.28 kJ•mol-1 (MP2/6-311G* 6-311G*).