A Fluorescence Sensor Array Based on Zinc(II)-Carboxyamidoquinolines: Toward Quantitative Detection of ATP**

The newly prepared fluorescent carboxyamidoquinolines ( 1 – 3 ) and their Zn(II) complexes ( Zn@1-Zn@3 ) were used to bind and sense various phosphate anions utilizing a relay mechanism, in which the Zn(II) ion migrates from the Zn@1-Zn@3 complexes to the phosphate, namely adenosine 5’-triphosphate (ATP) and pyrophosphate (PPi), a process accompanied by a dramatic change in fluorescence. Zn@1-Zn@3 assemblies interact with adenine nucleotide phosphates while displaying an analyte-specific response. This process was investigated using UV-vis, fluorescence, and NMR spectroscopy. It is shown that the different binding selectivity and the corresponding fluorescence response enable differentiation of adenosine 5’-triphosphate (ATP), adenosine 5’-diphosphate (ADP), pyrophosphate (PPi), and phosphate (Pi). The cross-reactive nature of the carboxyamidoquinolines-Zn(II) sensors in conjunction with linear discriminant analysis (LDA) was utilized in a simple fluorescence chemosensor array that allows for the identification of ATP, ADP, PPi, and Pi from 8 other anions including adenosine 5’-monophosphate (AMP) with 100 % correct classification. Furthermore, the support vector machine algorithm, a machine learning method, allowed for highly accurate quantitation of ATP in the range of 5–100 μM concentration in unknown samples with error <2.5 %.     

Dual signal (color change and fluorescence ON-OFF) ensemble system based on bis(Dpa-Cu) complex for detection of PPi in water

We have developed simple dual signal (color change and fluorescence ON-OFF) ensemble systems based on a bis(Dpa-Cu^II) complex 1 for the detection of PPi in water. Dual signal takes place because of weak binding and fluorescence quenching effect of coordinatively unsaturated Cu^II complex for indicators and replacement of the indicators by more strongly binding PPi. As a consequence, these ensembles show a high selectivity and sensitivity for PPi over various anions including phosphate and its derivatives (AMP, ADP, and ATP) in water.     

Novel coumarin-based containing denrons selective fluorescent chemosesor for sequential recognition of Cu2+ and PPi

In this study, we have successfully synthesized a novel coumarin-based dendrons derivative CD and its chemical structure was characterized by ¹H NMR, ¹³C NMR and ESI-HR-MS. The sensor CD showed an obvious “on-off” fluorescence quenching response toward Cu²⁺ with a maximum quenching efficiency of 99.8%. The CD-Cu²⁺ complex showed an “off-on” fluorescence enhancement response toward PPi over many competitive anions. The detection limit of the sensor CD was 0.29?×?10^?6?M to Cu²⁺ and 2.39?×?10^?9?M to PPi. In addition, the sensor CD showed a 1:1 binding stoichiometry to Cu²⁺ and the sensor CD-Cu²⁺ showed a 2:1 binding stoichiometry to PPi in CH₃CN/HEPES buffer medium (9:1 v/v, pH?=?7.2). The stable pH range of sensor CD to Cu²⁺ and CD-Cu²⁺ to PPi was from 3 to 8.     

Ratiometric fluorescence and visual sensing of ATP based on gold nanocluster-encapsulated metal-organic framework with a smartphone

Adenosine triphosphate (ATP) plays an important role in various biological processes and the ATP level is closely associated with many diseases. Herein, we designed a novel dual-emissive fluorescence nanoplatform for ATP sensing based on red emissive europium metal-organic framework (Eu-MOF) and blue emissive gold nanoclusters (AuNCs). The presence of ATP causes the decomposition of Eu-MOF owing to strong affinity of Eu³⁺ with ATP. As a result, the red emission of Eu-MOF decreases while the blue emission of AuNCs remains unchanged. The distinct red/blue emission intensity change enables the establishment of a ratiometric fluorescent and visual sensor of ATP. Moreover, a fluorescent paper-based sensor was fabricated with the ratiometric ATP probes, which enabled easy-to-use and visual detection of ATP in serum samples with a smartphone.     

Labile zinc-assisted biological phosphate chemosensing and related molecular logic gating interpretations

Herein, molecular fluorescence 'OFF-ON' behavior with aqueous addition of biological phosphate and Zn(2+) is studied with Zn(2)(slys)(2)Cl(2) [H(2)slys = 6-amino-2-{(2-hydroxybenzylidene)amino}hexanoic acid], a fluorescent water-soluble complex, using various spectroscopic tools (e.g., (31)P NMR, UV-vis, emission, and CD spectroscopy) at the micromolar level. Adduct-dependent fluorescence intensity changes can be interpreted as a two-input (cation/anion) implication molecular logic gating system. A displacement study of PPi from the dizinc complex is also reported. Diphosphate and triphosphate addition/displacements were also studied. (31)P NMR spectroscopy shows gradual NMR peak shifts from bound ADP/GDP to free ADP/GDP with increasing [PPi]. In the emission spectrum, fluorescence quenching is shown: CD signal maxima decrease with addition of PPi. These displacement events are also tested with triphosphates (ATP, GTP), and their binding strength/displacement ability over ADP/GDP is quantified: PPi > ATP ≈ GTP (3.35 ± 0.77 × 10(4) M(-1) for PPi, 7.73 ± 1.79 × 10(3) M(-1) for ATP, 9.21 ± 2.88 × 10(3) M(-1) for GTP over 1·ADP). Many anions and cations were also screened for selectivity. Tubulin polymerization was assayed in the presence of 1 and its copper analogue which reflected a slight inhibition in polymerization.     

A coumarin based highly selective fluorescent chemosensor for sequential recognition of Cu2+ and PPi

In this study, we have successfully synthesized a new coumarin based fluorescent chemosensor 1, in which tren and quinolone are introduced as receptors for sequential recognition of Cu²⁺ and PPi. The structure of chemosensor 1 was characterized by ¹H NMR, ¹³C NMR and ESI-HR-MS. Sensor 1 showed an obvious “on-off” fluorescence quenching response toward Cu²⁺, and the quenching efficiency reached a maximum of 99.6% with the addition of 20 equiv. of Cu²⁺. The 1-Cu²⁺ complex showed an “off-on” fluorescence enhancement response toward PPi over many competitive anions, especially HPO₄^2? and H₂PO₄^?. The detection limit of sensor 1 was 1.9?×?10^?6?M to Cu²⁺ and 5.96?×?10^?8?M to PPi. In addition, sensor 1 showed a 1:1 binding stoichiometry to Cu²⁺ and sensor 1-Cu²⁺ showed a 2: 1 binding stoichiometry to PPi in CH₃CN/HEPES buffer medium (9:1 v/v, pH?=?7.4). The stable pH range of sensor 1 to Cu²⁺ and 1-Cu²⁺ to PPi was from 4 to 8.     

可用于连续识别Cu^2+和阴离子、中性分子荧光探针的研究进展

铜(Cu)含量的高低直接影响着生命体的正常运转和自然体系的平衡.检测铜离子的方法多种多样,其中具有较高敏感度和选择性的荧光化学传感器应用更加广泛.综述了以Cu^2+为基的荧光化学传感器通过"替换"法实现了对阴离子S^2-, CN^-, H2PO4^-, PPi和I^-以及中性分子ATP、ADP和生物硫醇等的连续识别的研究进展.     

Electrochemiluminescence Sensor for Phosphate Ions Based on Europium(III)‐Modulated CdSe Quantum Dots

Phosphate anions are determined based on the electrochemiluminescence (ECL) of CdSe quantum dots (CdSe QDs) capped with 3‐mercaptopropionic acid. The ECL gets quenched with the introduction of Eu³⁺ ions, but it is restored on the further addition of phosphate anions. The sensing mechanism might be due to the strong and specific interaction between phosphate anions and the Eu³⁺ ions, leading to the releasing of CdSe QDs from aggregates. On the basis of the quenching/recovery ECL behaviors, the ECL sensor offer acceptable sensitivity, high selectivity, and a linear response from 0.1 to 120 µM with a detection limit of 0.03 µM (3δ) for phosphate anions.     

A highly selective turn-on ATP fluorescence sensor based on unmodified cysteamine capped CdS quantum dots

Unmodified cysteamine capped nanocrystalline cadmium sulfide quantum dots (Cys-CdS QDs) were demonstrated as a selective turn-on fluorescence sensor for sensing adenosine-5′-triphosphate (ATP) in aqueous solution for the first time. The fluorescence intensity of the Cys-CdS QDs was significantly enhanced in the presence of ATP. In addition, the fluorescence intensity of the Cys-CdS QDs increased when increasing ATP concentrations. On the other hand, other phosphate metabolites and other tested common anions did not significantly alter the fluorescence intensity of the Cys-CdS QDs. In addition, this sensor showed excellent discrimination of pyrophosphate (PPi) from ATP detection. The proposed sensor could efficiently be used for ATP sensing at very low concentration with LOD of 17 μM with the linear working concentration range of 20–80 μM. The feasibility of the proposed sensor for determining ATP in urine samples was also studied, and satisfactory results were obtained.     

Lanthanide(III) Complexes of Bis‐semicarbazone and Bis‐imine‐Substituted Phenanthroline Ligands: Solid‐State Structures,Photophysical Properties,and Anion Sensing

Phenanthroline‐based hexadentate ligands L¹ and L² bearing two achiral semicarbazone or two chiral imine moieties as well as the respective mononuclear complexes incorporating various lanthanide ions, such as La^III, Eu^III, Tb^III, Lu^III, and Y^III metal ions, were synthesized, and the crystal structures of [ML¹Cl₃] (M=La^III, Eu^III, Tb^III, Lu^III, or Y^III) complexes were determined. Solvent or water molecules act as coligands for the rare‐earth metals in addition to halide anions. The big Ln^III ion exhibits a coordination number (CN) of 10, whereas the corresponding Eu^III, Tb^III, Lu^III, and Y^III centers with smaller ionic radii show CN=9. Complexes of L², namely [ML²Cl₃] (M=Eu^III, Tb^III, Lu^III, or Y^III) ions could also be prepared. Only the complex of Eu^III showed red luminescence, whereas all the others were nonluminescent. The emission properties of the Eu derivative can be applied as a photophysical signal for sensing various anions. The addition of phosphate anions leads to a unique change in the luminescence behavior. As a case study, the quenching behavior of adenosine‐5′‐triphosphate (ATP) was investigated at physiological pH value in an aqueous solvent. A specificity of the sensor for ATP relative to adenosine‐5′‐diphosphate (ADP) and adenosine‐5′‐monophosphate (AMP) was found. ³¹P NMR spectroscopic studies revealed the formation of a [EuL²(ATP)] coordination species.     

Fluorescent sensing of pyrophosphate and ATP in 100% aqueous solution using a fluorescein derivative and Mn

A new fluorescein derivative has been synthesized for the detection of pyrophosphate (PPi) and ATP in 100% aqueous solution. Chemosensor 1 in the presence of Mn²⁺ (2.5 equiv) displayed selective fluorescent enhancements with PPi and ATP at pH 7.4. among the anions examined. The association constant of 1 in the presence of Mn²⁺ with PPi and ATP was calculated as 4.2 × 10⁴ and 3.5 × 10⁴ M⁻¹.     

A quinoline-based selective ‘turn on’ chemosensor for zinc(II) via quad-core complex,and its application in live cell imaging

An efficient quinoline-based fluorescent chemosensor (QLNPY) was successfully developed for the detection of zinc ions (Zn²⁺). This novel chemosensor displayed higher sensitivity and selectivity toward Zn²⁺ over other competitive metal ions accompanying with obvious fluorescence enhancement. The QLNPY-Zn²⁺ complex can be further used as a new fluorescent “turn-off” sensor for pyrophosphate (PPi) and sulfur ion (S^2?) via a Zn²⁺ displacement approach. The limits of detection were calculated to be 3.8 × 10^?8 M for Zn²⁺, 3.7 × 10^?7 M for PPi and 4.9 × 10^?7 M for S^2?. The binding mechanism of QLNPY and Zn²⁺ was investigated through NMR, HR-MS analysis and further studied by crystallographic analysis. Additionally, further application of QLNPY for sequential bioimaging of Zn²⁺ and PPi was studied in HepG2 cells, suggesting that the quinoline-based chemosensor possesses great potential applications for the detection of intracellular Zn²⁺ and PPi in vivo.     

Hybrid supraparticles of carbon dots/porphyrin for multifunctional tongue-mimic sensors

Supraparticles（SPs）, such as assembly of inorganic components with organic, have made tremendous attention in biochemical analysis, which represents a novel but challenging research orientation. Herein, a single-SPs multifunctional fluorescent sensor array has been developed for high-throughput detection of heavy metal ions in biofluids, which is based on an inorganic/organic hybrid SPs consisting of carbon dots（CDs） and an easily available porphyrin [5,10,15,20-tetra（4-carboxyphenyl）porphyrin（T...     

Polydiacetylene‐Based Colorimetric Self‐Assembled Vesicular Receptors for Biological Phosphate Ion Recognition

Self‐assembled vesicular polydiacetylene (PDA) particles with embedded metal complex receptor sites have been prepared. The particles respond to the presence of ATP and PPi (pyrophosphate) in buffered aqueous solution by visible changes of their color and emission properties. Blue PDA vesicles of uniform size of about 200 nm were obtained upon UV irradiation from mono‐ and dinuclear zinc(II)–cyclen and iminodiacetato copper [Cu^II–IDA] modified diacetylenes, embedded in amphiphilic diacetylene monomers. Addition of ATP and PPi to the PDA vesicle solution induces a color change from blue to red observable by the naked eye. The binding of ATP and PPi changes the emission intensity. Other anions such as ADP, AMP, H₂PO₄^?, CH₃COO^?, F^?, Cl^?, Br^? and I^?, failed to induce any spectral changes. The zinc(II)–cyclen nanoparticles are useful for the facile detection of PPi and ATP in millimolar concentrations in neutral aqueous solutions, while Cu^II–IDA modified vesicular PDA receptors are able to selectively discriminate between ATP and PPi.     

Metal ion based chiral fluorescence sensor selective for dihydrogenphosphate

A Cu(II) based conformationally restricted chiral fluorescence sensor (receptor 2) has been designed and synthesized for selective sensing of anions. The anion recognition property of the Cu²⁺-complex has been studied in acetonitrile by fluorescence methods which show remarkable sensitivity toward dihydrogen phosphate via fluorescence modulation of the Cu²⁺-complex over the other anions examined.     

ATP Sensing with Anthryl‐Functionalized Open‐Chain Polyaza‐alkanes

The anthryl‐functionalized open‐chain polyaza‐alkanes L ¹ , L ² , and L ³ have been synthesized, and their activity as fluorescent chemosensors has been studied in MeCN/H₂O 70 : 30 (v/v) and H₂O at 25° against the anions bromide, phosphate, sulfate, ATP, ADP, and GMP. The crystal structure of L ³ has been solved by single‐crystal X‐ray‐diffraction techniques. The emission intensity of L ¹ and L ² is selectively quenched in the presence of ATP at acidic pH in MeCN/H₂O 70 : 30 (v/v). In H₂O, the emission intensity of L ¹ and L ² is enhanced at neutral pH in the presence of ADP and ATP. The sensing behavior is discussed in terms of H‐bonding or electrostatic anion‐cation interactions. Receptor L ³ does not show any significant change in fluorescence emission upon addition of anions. Protonation constants of the three ligands and stability constants of L ² with phosphate and sulfate were determined by potentiometric titration in MeCN/H₂O. The stability constants obtained are compared with those obtained for the interaction of these anions with related open‐chain polyamines.     

Electrochemical determination of pyrophosphate at nanomolar levels using a gold electrode covered with a cysteine nanofilm and based on competitive coordination of Cu(II) ion to cysteine and pyrophosphate

We are presenting an electrochemical method for the determination of pyrophosphate ions (PPi) that is based on the competitive coordination of Cu(II) ion to a nanofilm of cysteine (Cys) and dissolved PPi. Cys was immobilized on the surface of a gold electrode by self-assembly. The Cys-modified gold electrode was loaded with Cu(II) ion which is released from the surface on addition of a sample containing PPi. The sensor shows an unprecedented electrochemical response to PPi, and the reduction peak currents is linearly related to the logarithm of the concentration of PPi in the 100 nM to 10 mM range (with an R² or 0.982). The limit of detection is ~10 nM which is lower than the detection limits hitherto reported for PPi. Adenosine triphosphate (ATP), adenosine diphosphate (ADP), adenosine monophosphate (AMP) and common anions give a much weaker response. The method demonstrated here is simple, effective, highly sensitive, hardly interfered, and does not require the addition of a reagent. The method was applied to the determination of PPi in (spiked) serum samples.

Schematic illustration of the pyrophosphate sensing process.

     

Ratiometric Detection of Adenosine Triphosphate (ATP) in Water and Real‐Time Monitoring of Apyrase Activity with a Tripodal Zinc Complex

Two tripodal fluorescent probes Zn?L^{1 , 2} have been synthesised, and their anion‐binding capabilities were examined by using fluorescence spectroscopy. Probe Zn?L¹ allows the selective and ratiometric detection of adenosine triphosphate (ATP) at physiological pH, even in the presence of several competing anions, such as ADP, phosphate and bicarbonate. The probe was applied to the real‐time monitoring of the apyrase‐catalysed hydrolysis of ATP, in a medium that mimics an extracellular fluid.     

Carbazole-based Schiff base: A sensitive fluorescent ‘turn-on’ chemosensor for recognition of Al(III) ions in aqueous-alcohol media

Carbazole-based Schiff base chemosensor was synthesized in one-pot synthesis using 2-hydroxy-1-naphtaldehyde for fluorescent sensing of Al³⁺ ions. Characterization of the ligand (L) was revealed through spectroscopic and physicochemical techniques. The fluorescence emission responses of L to various metal ions and anions were investigated. The chelation was studied by UV–vis, ¹H NMR, LC-MS/MS, fluorescence titration and Job’s plot analysis. Bathochromic shift resulted from charge transfer from L to electrophilic Al³⁺ ion was observed in the chelation of L with Al³⁺. The potentiality of L to be a distinguished probe to detect Al³⁺ ions was due to a chelation enhanced fluorescence (CHEF) effect, concomitant with noticeable fluorescent enhancement. A significant fluorescence enhancement at 533 nm was observed in ethanol–water (1:1, v/v) solution upon addition of Al³⁺ along with a distinct color change from yellow to white. Non-fluorescent ligand exposed highly sensitive turn-on fluorescent sensor behavior for selectively sensing Al³⁺ ions via 1:1 (ligand:metal) stoichiometry. The ligand’s specificity in the existence of other tested metal ions and anions indicated no observation in color change. The ligand-Al³⁺ complex formation was reversible upon addition of chelating agent EDTA. The ligand interacted with Al³⁺ ions with an association constant of K_a = 5 × 10⁴ M^?1. The limit of detection (LOD) was found to be 2.59 × 10^-7 M. The synthesized Schiff base could efficiently detect Al³⁺ ions as a fluorescent sensor.     

An inorganic phosphate (Pi) sensor triggers ‘turn-on’ fluorescence response by removal of a Cu ion from a Cu-ligand sensor: determination of Pi in biological samples

A fluorescent ligand that displays a high selectivity for Cu²⁺ has been synthesized. On complexation with Cu²⁺, the fluorescence of the ligand is quenched. Inorganic phosphate ions decomplex Cu²⁺ displaying a fluorescence enhancement that can even be seen with naked eyes. The method was successfully used in quantitative determination of inorganic phosphates in serum, urine, and saliva samples.