SACM/CT Study of the dissociation/recombination dynamics of hydrogen peroxide on an ab initio potential energy surface. Part II. Specific rate constants k(E,J), thermal rate constants k infinity(T), and lifetime distributions

Statistical adiabatic channel model/classical trajectory (SACM/CT) calculations of the dissociation/recombination dynamics of hydrogen peroxide, H(2)O(2) <--> 2HO, have been performed on an ab initio potential energy surface by Kuhn, Rizzo, Luckhaus, Quack, and Suhm (J. Chem. Phys. 1999, 111, 2565). Specific rate constants k(E,J), thermal rate constants k(infinity)(T), and lifetime distributions are determined. After averaging over J, the derived k(E,J) are in quantitative agreement with non-exponential time-profiles of HO formation recorded after overtone excitation of H(2)O(2) near the dissociation threshold by Scherer and Zewail (J. Chem. Phys. 1987, 87, 97). The thermal high pressure rate constants for HO recombination agree with experimental data as well and can be represented by k(rec,infinity)/10(-10) cm(3) molecule(-1) s(-1) approximately [0.376 (298 K/T)(0.47) + 0.013 (T/298 K)(0.74)] over the range 60-1500 K. Non-statistical lifetime distributions are suggested not to have been of major relevance for the available experiment.     

On the model dependence of kinetic shifts in unimolecular reactions: the dissociation of the cations of benzene and n-butylbenzene

Statistical adiabatic channel model/classical trajectory (SACM/CT) calculations have been performed for transitional mode dynamics in the simple bond fission reactions of C(6)H(6)(+) --> C(6)H(5)(+) + H and n-C(6)H(5)C(4)H(9)(+) --> C(7)H(7)(+) + n-C(3)H(7). Reduced-dimensionality model potentials have been designed that take advantage of ab initio results as far as available. Average anisotropy amplitudes of the potentials were fitted by comparison of calculated specific rate constants k(E,J) with measured values. The kinetic shifts of the calculated k(E) curves and the corresponding bond energies E(0)(J=0), derived as 3.90 +/- 0.05 eV for C(6)H(6)(+) and 1.78 +/- 0.05 eV for n-C(6)H(5)C(4)H(9)(+), were in good agreement with literature values from thermochemical studies. Kinetic shifts from fixed tight activated complex Rice-Ramsperger-Kassel-Marcus (RRKM) theory, which also reproduces the measured k(E), were larger than the present SACM/CT results as well as earlier results from variational transition state theory (for C(6)H(6)(+)). The approach using RRKM theory was found to underestimate E(0)(J=0) by about 0.2-0.3 eV. A simplified SACM/CT-based method is also proposed which circumvents the trajectory calculations and allows derivation of E(0)(J=0) on the basis of measured k(E) and which provides similar accuracy as the full SACM/CT treatment.     

The addition of hydrogen atoms to diacetylene and the heats of formation of i-C4H3 and n-C4H3

In this article, we discuss in detail the addition of hydrogen atoms to diacetylene and the reverse dissociation reactions, H + C(4)H(2)<==>i-C(4)H(3) (R1) and H + C(4)H(2)<==>n-C(4)H(3) (R2). The theory utilizes high-level electronic structure methodology to characterize the potential energy surface, Rice-Ramsperger-Kassel-Marcus (RRKM) theory to calculate microcanonical/J-resolved rate coefficients, and a two-dimensional master-equation approach to extract phenomenological (thermal) rate coefficients. Comparison is made with experimental results where they are available. The rate coefficients k1(T, p) and k2(T, p) are cast in forms that can be used in chemical kinetic modeling. In addition, we predict values of the heats of formation of i-C(4)H(3) and n-C(4)H(3) and discuss their importance in flame chemistry. Our basis-set extrapolated, quadratic-configuration-interaction with single and double excitations (and triple excitations added perturbatively), QCISD(T), predictions of these heats of formation at 298 K are 130.8 kcal/mol for n-C(4)H(3) and 119.3 kcal/mol for the i-isomer; multireference CI calculations with a nine-electron, nine-orbital, complete-active-space (CAS) reference wavefunction give just slightly larger values for these parameters. Our results are in good agreement with the recent focal-point analysis of Wheeler et al. (J. Chem. Phys. 2004, 121, 8800-8813), but they differ substantially for DeltaH0(f 298)(n-C(4)H(3)) with the earlier diffusion Monte Carlo predictions of Krokidis et al. (Int. J. Chem. Kinet.2001, 33, 808-820).     

Reductions by titanium(II) as catalyzed by titanium(IV)

The cobalt(III) complexes, [(NH3)5CoBr]2+ and [(NH3)5CoI]2+ are reduced by Ti(II) solutions containing Ti(IV), generating nearly linear (zero-order) profiles that become curved only during the last few percent of reaction. Other Co(III)-Ti(II) systems exhibit the usual exponential traces with rates proportional to [Co(III)]. Observed kinetics of the biphasic catalyzed Ti(II)-Co(III)Br and Ti(II)-Co(III)I reactions support the reaction sequence: [Ti(II)(H20)n]2+ + [Ti(IV)F5]- (k1)<==>(k -1) [Ti(II)(H2O)(n-1)]2+ + [(H2O)Ti(IV)F5]-, [Ti(II)(H2O)(n-1)]2+ + Co(III) (k2)--> Ti(III) + Co(II) with rates determined mainly by the slow Ti(IV)-Ti(II) ligand exchange (k1 = 9 x 10(-3) M(-1) s(-1) at 22 degrees C). Computer simulations of the catalyzed Ti(II)-Co(III) reaction in perchlorate-triflate media yield relative rates for reduction by the proposed active [Ti(II)(H2O)(n-1)]2+ intermediate; k(Br)/k(I) = 8.     

Reflected shock tube studies of high-temperature rate constants for OH + NO2 --> HO2 + NO and OH + HO2 --> H2O + O2

The motivation for the present study comes from the preceding paper where it is suggested that accepted rate constants for OH + NO2 --> NO + HO2 are high by approximately 2. This conclusion was based on a reevaluation of heats of formation for HO2, OH, NO, and NO2 using the Active Thermochemical Table (ATcT) approach. The present experiments were performed in C2H5I/NO2 mixtures, using the reflected shock tube technique and OH-radical electronic absorption detection (at 308 nm) and using a multipass optical system. Time-dependent profile decays were fitted with a 23-step mechanism, but only OH + NO2, OH + HO2, both HO2 and NO2 dissociations, and the atom molecule reactions, O + NO2 and O + C2H4, contributed to the decay profile. Since all of the reactions except the first two are known with good accuracy, the profiles were fitted by varying only OH + NO2 and OH + HO2. The new ATcT approach was used to evaluate equilibrium constants so that back reactions were accurately taken into account. The combined rate constant from the present work and earlier work by Glaenzer and Troe (GT) is k(OH+NO2) = 2.25 x 10(-11) exp(-3831 K/T) cm3 molecule(-1) s(-1), which is a factor of 2 lower than the extrapolated direct value from Howard but agrees well with NO + HO2 --> OH + NO2 transformed with the updated equilibrium constants. Also, the rate constant for OH + HO2 suitable for combustion modeling applications over the T range (1200-1700 K) is (5 +/- 3) x 10(-11) cm3 molecule(-1) s(-1). Finally, simulating previous experimental results of GT using our updated mechanism, we suggest a constant rate for k(HO2+NO2) = (2.2 +/- 0.7) x 10(-11) cm3 molecule(-1) s(-1) over the T range 1350-1760 K.     

Calculation of the rate constant for state-selected recombination of H+O2(nu) as a function of temperature and pressure

Classical trajectory calculations using the MERCURY/VENUS code have been carried out on the H+O(2) reactive system using the DMBE-IV potential energy surface. The vibrational quantum number and the temperature were selected over the ranges nu=0 to 15, and T=300 to 10 000 K, respectively. All other variables were averaged. Rate constants were determined for the energy transfer process, H+O(2)(nu)-->H+O(2)(nu(")), for the bimolecular exchange process, H+O(2)(nu)-->OH(nu('))+O, and for the dissociative process, H+O(2)(nu)-->H+O+O. The dissociative process appears to be a mere extension of the process of transferring large amounts of energy. State-to-state rate constants are given for the exchange reaction, and they are in reasonable agreement with previous results, while the energy transfer and dissociative rate constants have never been reported previously. The lifetime distributions of the HO(2) complex, calculated as a function of v and temperature, were used as a basis for determining the relative contributions of various vibrational states of O(2) to the thermal rate coefficients for recombination at various pressures. This novel approach, based on the complex's ability to survive until it collides in a secondary process with an inert gas, is used here for the first time. Complete falloff curves for the recombination of H+O(2) are also calculated over a wide range of temperatures and pressures. The combination of the two separate studies results in pressure- and temperature-dependent rate constants for H+O(2)(nu)(+Ar) right arrow over left arrow HO(2)(+Ar). It is found that, unlike the exchange reaction, vibrational and rotational-translational energy are liabilities in promoting recombination.     

Atmospheric chemistry of n-C(x)F(2)(x)(+1)CHO (x = 1, 2, 3, 4): fate of n-C(x)F(2)(x)(+1)C(O) radicals

Smog chamber/FTIR techniques were used to study the atmospheric fate of n-C(x)F(2)(x)(+1)C(O) (x = 1, 2, 3, 4) radicals in 700 Torr O(2)/N(2) diluent at 298 +/- 3 K. A competition is observed between reaction with O(2) to form n-C(x)()F(2)(x)()(+1)C(O)O(2) radicals and decomposition to form n-C(x)F(2)(x)(+1) radicals and CO. In 700 Torr O(2)/N(2) diluent at 298 +/- 3 K, the rate constant ratio, k(n-C(x)F(2)(x)(+1)C(O) + O(2) --> n-C(x)F(2)(x)(+1)C(O)O(2))/k(n-C(x)F(2)(x)(+1)C(O) --> n-C(x)F(2)(x)(+1) + CO) = (1.30 +/- 0.05) x 10(-17), (1.90 +/- 0.17) x 10(-19), (5.04 +/- 0.40) x 10(-20), and (2.67 +/- 0.42) x 10(-20) cm(3) molecule(-1) for x = 1, 2, 3, 4, respectively. In one atmosphere of air at 298 K, reaction with O(2) accounts for 99%, 50%, 21%, and 12% of the loss of n-C(x)F(2)(x)(+1)C(O) radicals for x = 1, 2, 3, 4, respectively. Results are discussed with respect to the atmospheric chemistry of n-C(x)F(2)(x)(+1)C(O) radicals and their possible role in contributing to the formation of perfluorocarboxylic acids in the environment.     

Implementation of a microcanonical variational transition state theory for direct dynamics calculations of rate constants

Calculation of microcanonical rate constants has been an important field in chemical dy-namic studies for many years because it can be used not only to give good prediction of rate con-stants in microcanonical assembly, but also to calculate rate constants with certain conserved quantum numbers such as the total angular momentum, and in turn, can be easily converted into thermal rate constants[1—3]. The widely used method for calculating microcanonical rate constants of unimolecular reac-tions…     

Manifestation of stereoelectronic effects on the calculated carbon-hydrogen bond lengths and one-bond 1J(C-H) NMR coupling constants. Relative acceptor ability of the carbonyl (C=O), thiocarbonyl (C=S), and methylidene (C=CH2) groups toward C-H donor bonds

Theoretical examination [B3LYP/6-31G(d,p), PP/IGLO-III//B3LYP/6-31G(d,p), and NBO methods] of six-membered cyclohexane 1 and carbonyl-, thiocarbonyl-, or methylidene-containing derivatives 2-27 afforded precise structural (in particular, C-H bond distances) and spectroscopic (specifically, one-bond (1)J(C)(-)(H) NMR coupling constants) data that show the consequences of stereoelectronic hyperconjugative effects in these systems. Major observations include the following. (1) sigma(C)(-)(H)(ax)() -->(C)(=)(Y) and pi(C)(=)(Y) --> sigma(C)(-)(H)(ax)() (Y = O, S, or CH(2)) hyperconjugation leads to a shortening (strengthening) of the equatorial C-H bonds adjacent to the pi group. This effect is reflected in smaller (1)J(C)(-)(H)(ax)() coupling constants relative to (1)J(C)(-)(H)(eq)(). (2) Comparison of the structural and spectroscopic consequences of sigma(C)(-)(H)(ax)() --> pi(C)(=)(Y) hyperconjugation in cyclohexanone 2, thiocyclohexanone 3, and methylenecyclohexane 4 suggests a relative order of acceptor orbital ability C=S > C=O > C=CH(2), which is in line with available pK(a) data. (3) Analysis of the structural and spectroscopic data gathered for heterocyclic derivatives 5-12 reveals some additivity of sigma(C)(-)(H)(ax)() --> pi(C)(=)(Y), pi(C)(=)(Y) --> sigma(C)(-)(H)(ax)(), n(X) --> sigma(C)(-)(H)(ax)(), n(beta)(O) --> sigma(C)(-)(H)(eq)(), and sigma(S)(-)(C) --> sigma(C)(-)(H)(eq)() stereoelectronic effects that is, nevertheless, attenuated by saturation effects. (4) Modulation of the C=Y acceptor character of the exocyclic pigroup by conjugation with alpha-heteroatoms O, N, and S in lactones, lactams, and methylidenic analogues 13-24 results in decreased sigma(C)(-)(H)(ax)() --> pi(C)(=)(Y) and pi(C)(=)(Y) --> sigma(C)(-)(H)(ax)() hyperconjugation. (5) Additivity of sigma(C)(-)(H)(ax)() --> pi(C)(=)(Y) and pi(C)(=)(Y) --> sigma(C)(-)(H)(ax)() hyperconjugative effects is also apparent in 1,3-dicarbonyl derivative 25 (C=Y equal to C=O), 1,3-dithiocarbonyl derivative 26 (C=Y equal to C=S), and 1,3-dimethylidenic analogue 27 (C=Y equal to C=CH(2)).     

Kinetics of Dissociation of Iron(III) Complexes of Tiron in Aqueous Acid

The kinetics of dissociation of the mono, bis, and tris complexes of Tiron (1,2-dihydroxy-3,5-benzenedisulfonate) have been studied in acidic aqueous solutions in 1.0 M HClO(4)/NaClO(4), as a function of [H(+)] and temperature. In general, the kinetics can be explained by two reactions, (H(2)O)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L(n)H) + H(+) (k(n), k(-n)) and (HO)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L(n)H) (k(n)', k(-n)'), a rapid equilibrium, (H(2)O)Fe(L(n)H) right arrow over left arrow (H(2)O)Fe(L)(n) + H(+) (K(cn)), and the formation constant (H(2)O)Fe(L)(n)(-1) + H(2)L right arrow over left arrow (H(2)O)Fe(L)(n) + 2H(+). For n = 1, the reaction was observed at 670 nm, and at [H(+)] of 0.05-0.5 M at temperatures of 2.0, 14.0, 25.0, and 36.7 degrees C. For n = 2, the analogous conditions are 562 nm, at [H(+)] of 1.5 x 10(-3) to 1.4 x 10(-2) M at temperatures of 2.0, 9.0, and 14.0 degrees C. For n = 3, the conditions are 482 nm, at pH 4.5-5.7 in 0.02 M acetate buffer at temperatures of 1.8, 8.0, and 14.5 degrees C. The rate or equilibrium constants (25 degrees C) with DeltaH or DeltaH degrees (kcal mol(-1)) and DeltaS or DeltaS degrees (cal mol(-1) K(-1)) in brackets are as follows: for n = 1, k(1) = 2.3 M(-1) s(-1) (8.9, -27.1), k(-1) = 1.18 M(-1) s(-1) (4.04, -44.8), K(c1) = 0.96 M (-9.99, -33.6), K(f1) = 2.01 M (-5.14, -15.85); for n = 2, k(-2)/K(c2) = 1.9 x 10(7) (19.9, 41.5) and k(-2)'/K(c2) = 1.85 x 10(3) (1.4, -38.8) and a lower limit of K(c2) > 0.015 M; for n = 3, k(3) = 7.7 x 10(3) (15.8, 12.3), k(-3) = 1.7 x 10(7) (16.2, 28.9), K(c3) = 7.4 x 10(-5) M (4.1, -5.1), and K(f3) = 3.35 x 10(-8) (3.7, -21.7). From the variations in rate constants and activation parameters, it is suggested that the Fe(L)(2) and Fe(L)(3) complexes undergo substitution by dissociative activation, promoted by the catecholate ligands.     

Kinetics and mechanism of platinum-thallium bond formation: the binuclear [(CN)5Pt-Tl(CN)](-) and the trinuclear [(CN)5Pt-Tl-Pt(CN)5](3-) complex

Formation kinetics of the metal-metal bonded binuclear [(CN)(5)Pt-Tl(CN)](-) (1) and the trinuclear [(CN)(5)Pt-Tl-Pt(CN)(5)](3-) (2) complexes is studied, using the standard mix-and-measure spectrophotometric method. The overall reactions are Pt(CN)(4)(2-) + Tl(CN)(2)(+) <==> 1 and Pt(CN)(4)(2-) + [(CN)(5)Pt-Tl(CN)](-) <==> 2. The corresponding expressions for the pseudo-first-order rate constants are k(obs) = (k(1)[Tl(CN)(2)(+)] + k(-1))[Tl(CN)(2)(+)] (at Tl(CN)(2)(+) excess) and k(obs) = (k(2b)[Pt(CN)(4)(2-)] + k(-2b))[HCN] (at Pt(CN)(4)(2-) excess), and the computed parameters are k(1) = 1.04 +/- 0.02 M(-2) s(-1), k(-1) = k(1)/K(1) = 7 x 10(-5) M(-1) s(-1) and k(2b) = 0.45 +/- 0.04 M(-2) s(-1), K(2b) = 26 +/- 6 M(-1), k(-2b) = k(2b)/K(2b) = 0.017 M(-1) s(-1), respectively. Detailed kinetic models are proposed to rationalize the rate laws. Two important steps need to occur during the complex formation in both cases: (i) metal-metal bond formation and (ii) the coordination of the fifth cyanide to the platinum site in a nucleophilic addition. The main difference in the formation kinetics of the complexes is the nature of the cyanide donor in step ii. In the formation of [(CN)(5)Pt-Tl(CN)](-), Tl(CN)(2)(+) is the source of the cyanide ligand, while HCN is the cyanide donating agent in the formation of the trinuclear species. The combination of the results with previous data predict the following reactivity order for the nucleophilic agents: CN(-) > Tl(CN)(2)(+) > HCN.     

Determination of the rate constants for the NH2(X2B1) + NH2(X2B1) and NH2(X2B1) + H Recombination reactions with collision partners CH4, C2H6, CO2, CF4, and SF6 at low pressures and 296 K. Part 2

The recombination rate constants for the reactions NH2(X2B1) + NH2(X2B1) + M → N2H4 + M and NH2(X2B1) + H + M → NH3 + M, where M was CH4, C2H6, CO2, CF4, or SF6, were measured in the same experiment over presseure ranges of 1-20 and 7-20 Torr, respectively, at 296 ± 2 K. The NH2 radical was produced by the 193 nm laser photolysis of NH3. Both NH2 and NH3 were monitored simultaneously following the photolysis laser pulse. High-resolution time-resolved absorption spectroscopy was used to monitor the temporal dependence of both species: NH2 on the (1)2(21) ← (1)3(31) rotational transition of the (0,7,0)A2A1 ← (0,0,0)X2B1 electronic transition near 675 nm and NH3 in the IR on either of the inversion doublets of the qQ3(3) rotational transition of the ν1 fundamental near 2999 nm. The NH2 self-recombination clearly exhibited falloff behavior for the third-body collision partners used in this work. The pressure dependences of the NH2 self-recombination rate constants were fit using Troe’s parametrization scheme, k(inf), k(0), and F(cent), with k(inf) = 7.9 × 10(-11) cm3 molecule(-1) s(-1), the theoretical value calculated by Klippenstein et al. (J. Phys. Chem. A113, 113, 10241). The individual Troe parameters were CH4, k(0)(CH4) = 9.4 × 10(-29) and F(cent)(CH4) = 0.61; C2H6, k(0)(C2H6) = 1.5 × 10(-28) and F(cent)(C2H6) = 0.80; CO2, k(0)(CO2) = 8.6 × 10(-29) and F(cent)(CO2) = 0.66; CF4, k(0)(CF4) = 1.1 × 10(-28) and F(cent)(CF4) = 0.55; and SF6, k(0)(SF6) = 1.9 × 10(-28) and F(cent)(SF6) = 0.52, where the units of k0 are cm6 molecule(-2) s(-1). The NH2 + H + M reaction rate constant was assumed to be in the three-body pressure regime, and the association rate constants were CH4, (6.0 ± 1.8) × 10(-30); C2H6, (1.1 ± 0.41) × 10(-29); CO2, (6.5 ± 1.8) × 10(-30); CF4, (8.3 ± 1.7) × 10(-30); and SF6, (1.4 ± 0.30) × 10(-29), with units cm6 molecule(-1) s,(-1) and the systematic and experimental errors are given at the 2σ confidence level.     

High-temperature rate constants for CH3OH + Kr --> products, OH + CH3OH --> products, OH + (CH3)(2)CO --> CH2COCH3 + H2O, and OH + CH3 --> CH) + H2O

The reflected shock tube technique with multipass absorption spectrometric detection of OH radicals at 308 nm (corresponding to a total path length of approximately 4.9 m) has been used to study the dissociation of methanol between 1591 and 2865 K. Rate constants for two product channels [CH3OH + Kr --> CH3 + OH + Kr (1) and CH3OH + Kr --> 1CH2 + H2O + Kr (2)] were determined. During the course of the study, it was necessary to determine several other rate constants that contributed to the profile fits. These include OH + CH3OH --> products, OH + (CH3)2CO --> CH2COCH3 + H2O, and OH + CH3 --> 1,3CH2 + H2O. The derived expressions, in units of cm(3) molecule(-1) s(-1), are k(1) = 9.33 x 10(-9) exp(-30857 K/T) for 1591-2287 K, k(2) = 3.27 x 10(-10) exp(-25946 K/T) for 1734-2287 K, kOH+CH3OH = 2.96 x 10-16T1.4434 exp(-57 K/T) for 210-1710 K, k(OH+(CH3)(2)CO) = (7.3 +/- 0.7) x 10(-12) for 1178-1299 K and k(OH+CH3) = (1.3 +/- 0.2) x 10(-11) for 1000-1200 K. With these values along with other well-established rate constants, a mechanism was used to obtain profile fits that agreed with experiment to within <+/-10%. The values obtained for reactions 1 and 2 are compared with earlier determinations and also with new theoretical calculations that are presented in the preceding article in this issue. These new calculations are in good agreement with the present data for both (1) and (2) and also for OH + CH3 --> products.     

Ferrimagnetic Mixed-Valency and Mixed-Metal Tris(oxalato)iron(III) Compounds: Synthesis, Structure, and Magnetism

The synthesis and structural and magnetic characterization of 16 compounds AM(II)Fe(III)(C(2)O(4))(3) (A = N(n-C(3)H(7))(4), N(n-C(4)H(9))(4), N(n-C(5)H(11))(4), P(n-C(4)H(9))(4), P(C(6)H(5))(4), N(n-C(4)H(9))(3)(C(6)H(5)CH(2)), (C(6)H(5))(3)PNP(C(6)H(5))(3), As(C(6)H(5))(4); M(II) = Mn, Fe) are reported. X-ray powder diffraction profiles are indexed in R3c or its subgroup P6(5)22 or P6/mmm to derive unit cell constants. The structures of all the compounds consist of two-dimensional honeycomb networks [M(II)Fe(III)(C(2)O(4))(3)(-)](infinity). The M(II) = Fe compounds behave as ferrimagnets with T(c) between 33 and 48 K, but five exhibit a crossover from positive to negative magnetization near 30 K when cooled in a field of 10 mT. The compounds exhibiting this unusual magnetic behavior are those that have the highest T(c). Within the set N(n-C(n)()H(2)(n)()(+1))(4)Fe(II)Fe(III)(C(2)O(4))(3) (n = 3-5), T(c) increases with interlayer separation and the low-temperature magnetization changes from positive (n = 3) to negative (n = 4, 5). In the M = Mn(II) compounds, the in-plane cell parameter a(0) is approximately 0.03 ? greater than in the corresponding M = Fe(II) ones while the interlayer separation (c(0)/6) is on average 0.08 ? smaller. All members of the M(II) = Mn series have magnetic susceptibilities showing broad maxima at 55 K characteristic of two-dimensional antiferromagnetism, but the magnetization of several of the salts increases sharply below 27 K due to the onset of spin canting, the magnitude of which varies significantly with A.     

Quantum chemical investigation of formation of polychlorodibenzo-p-dioxins and dibenzofurans from oxidation and pyrolysis of 2-chlorophenol

Density functional theory (DFT) calculations have been used to obtain thermochemical parameters for formation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) from the oxidation of 2-chlorophenol. Formation mechanisms of PCDD through radical-radical coupling have been investigated in detail. The sequence of 2-chlorophenoxy radical coupling has been studied. The formation of chlorinated bis keto dimers which results from cross coupling of 2-chlorophenoxy at the ortho carbon bearing hydrogen (a known direct route for PCDF formation) passes through a tight transition structure whose barrier is 9.4 kcal/mol (0 K). Three routes for the formation of the most abundant PCDD/PCDF species (viz., 4,6-dichlorodibenzofuran, 4,6-DCDF, and 1-monochlorodibenzo-p-dioxin, 1-MCDD) in oxidation and pyrolysis of 2-chlorophenol are discussed. In the case of 4,6-DCDF, formation through H or HO + keto-keto <==> H2 or H2O + keto-keto* <==> H2 or H2O + enol-keto* <==> H2 or H2O + 4,6-DCDF + HO is shown to be the preferred route. The other two routes proceed via closed shell processes (keto-keto <==> enol-keto <==> enol-enol <==> H2O + 4,6-DCDF) and (keto-keto <==> enol-keto <==> (H-,OH-) 4,6-DCDF <==> H2O + 4,6-DCDF). Results indicate that 1-MCDD should be the favored product in 2-chlorophenol pyrolysis in agreement with experimental findings. According to our results, tautomerization (inter-ring hydrogen transfer) and intra-annular displacement of HCl would not be competitive with paths deriving from H abstraction from the phenolic oxygen and the benzene ring followed by displacement of Cl in the formation of dibenzo-p-dioxin (DD) and 1-MCDD. The results presented here will assist in construction of detailed kinetic models to account for the formation of PCDD/PCDF from chlorophenols.     

CH(A2Delta) Formation in hydrocarbon combustion: the temperature dependence of the rate constant of the reaction C2H + O2--> CH(A2Delta) + CO2

The temperature dependence of the rate constant of the chemiluminescence reaction C2H + O2 --> CH(A) + CO2, k1e, has been experimentally determined over the temperature range 316-837 K using pulsed laser photolysis techniques. The rate constant was found to have a pronounced positive temperature dependence given by k1e(T) = AT(4.4) exp(1150 +/- 150/T), where A = 1 x 10(-27) cm(3) s(-1). The preexponential factor for k1e, A, which is known only to within an order of magnitude, is based on a revised expression for the rate constant for the C2H + O(3P) --> CH(A) + CO reaction, k2b, of (1.0 +/- 0.5) x 10(-11) exp(-230 K/T) cm3 s(-1) [Devriendt, K.; Van Look, H.; Ceursters, B.; Peeters, J. Chem. Phys. Lett. 1996, 261, 450] and a k2b/k1e determination of this work of 1200 +/- 500 at 295 K. Using the temperature dependence of the rate constant k1e(T)/k1e(300 K), which is much more accurately and precisely determined than is A, we predict an increase in k(1e) of a factor 60 +/- 16 between 300 and 1500 K. The ratio of rate constants k2b/k1e is predicted to change from 1200 +/- 500 at 295 K to 40 +/- 25 at 1500 K. These results suggest that the reaction C2H + O2 --> CH(A) + CO2 contributes significantly to CH(A-->X) chemiluminescence in hot flames and especially under fuel-lean conditions where it probably dominates the reaction C2H + O(3P) --> CH(A) + CO.     

Solubility of iron(II) carbonate at temperatures between 30 and 80 degrees

Measurements were made of the forward rate-constant (k(f)) for the dissolution of FeCO(3) at 10 degrees temperature intervals between 30 and 80 degrees and in buffered solutions at pH 4, 5, 6 and 7. The solubility product (K(sp)) of FeCO(3) was measured at the same six temperatures. The forward rate-constant is related to temperature (T, degrees C) and pH by pk(f) = pH - 0.0350T + 0.695. The solubility product of FeCO(3) is related to temperature by pK(sp) = 0.0314T + 10.20. Kinetic data indicate that, under the conditions of the study, the rate-determining step of the dissolution reaction is FeCO(3)(s) + H(+) --> Fe(2+) + HCO(-)(3).     

Theoretical study on the rate constants for the C2H5 + HBr --> C2H6 + Br reaction

The reaction C(2)H(5) + HBr --> C(2)H(6) + Br has been theoretically studied over the temperature range from 200 to 1400 K. The electronic structure information is calculated at the BHLYP/6-311+G(d,p) and QCISD/6-31+G(d) levels. With the aid of intrinsic reaction coordinate theory, the minimum energy paths (MEPs) are obtained at the both levels, and the energies along the MEP are further refined by performing the single-point calculations at the PMP4(SDTQ)/6-311+G(3df,2p)//BHLYP and QCISD(T)/6-311++G(2df,2pd)//QCISD levels. The calculated ICVT/SCT rate constants are in good agreement with available experimental values, and the calculate results further indicate that the C(2)H(5) + HBr reaction has negative temperature dependence at T < 850 K, but clearly shows positive temperature dependence at T > 850 K. The current work predicts that the kinetic isotope effect for the title reaction is inverse in the temperature range from 200 to 482 K, i.e., k(HBr)/k(DBr) < 1.     

Water-exchange study revealed unexpected substitution behavior of [(CO)2(NO)Re(H2O)3]2+ in aqueous media

The pH-dependent water-exchange rates of [(CO)2(NO)Re(H2O(cis))2(H2O(trans))]2+ (1) in aqueous media were investigated by means of 17O NMR spectroscopy at 298 K. Because of the low pK(a) value found for 1 (pK(a) = 1.4 +/- 0.3), the water-exchange rate constant k(obs)(H2O(trans/cis)) was analyzed with a two-pathway model in which k(Re)(H2O(trans/cis)) and k(ReOH)(H2O)(trans/cis)) denote the water-exchange rate constants in trans or cis position to the nitrosyl ligand on 1 and on the monohydroxo species [(CO)2(NO)Re(H2O)2(OH)]+ (2), respectively. Whereas the rate constants k(ReOH)(H2O)(trans)) and k(ReOH)(H2O)(cis)) were determined as (4.2 +/- 2) x 10(-3) s(-1) and (5.8 +/- 2) x 10(-4) s(-1), respectively, k(Re)(H2O)(trans)) and k(Re)(H2O)(cis)) were too small to be determined in the presence of the much more reactive species 2. Apart from the water exchange, an unexpectedly fast C identical with 16O --> C identical withO exchange was also observed via NMR and IR spectroscopy. It was found to proceed through 1 and 2, with rate constants k(Re)(CO) and k(ReOH)(CO) of (19 +/- 4) x 10(-3) s(-1) and (4 +/- 3) x 10(-3) s(-1), respectively. On the other hand, N identical with 16O --> N identical with *O exchange was not observed.