Asymmetric Synthesis and DNA Intercalation of (-)-6-[[(Aminoalkyl)oxy]methyl]-4-demethoxy-6,7- dideoxydaunomycinones(1)(,)

The BF(3).Et(2)O-promoted Diels-Alder addition of 1-acetylvinyl RADO(Et)-ate (RADO(Et)-ate = 3-ethyl-2-oxo-6,8-dioxa-3-azabicyclo[3.2.1]octane-7-exo-carboxylate) to 1-(dimethoxymethyl)-2,3,5,6-tetramethylidene-7-oxabicyclo[2.2.1]heptane led to one major monoadduct that added to 1,2-didehydrobenzene and was converted into (-)-4-demethoxy-7-deoxydaunomycinone and (2R)-12-acetoxy-2-acetyl-5-(bromomethyl)-1,2,3,4-tetrahydronaphthacen-2-yl RADO(Et)-ate. The latter compound was used to construct (8R)-8-acetyl-6,8-dihydroxy-11-[[(3'-[(aminopropyl)oxy]-, -4'-[(aminobutyl)oxy], and -5'-[(aminopentyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride (-)-8, (-)-9, (-)-10, respectively, as well as (8R)-8-acetyl-6,8-dihydroxy-11- [[[2'-[(3"-aminopropyl)amino]ethyl]oxy]- ((-)-11) and -[[3'-[(3"-aminopropyl)amino]propyl]oxy]methyl]-7,8,9, 10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-12). (8R)-8-Acetyl-6,8-dihydroxy-11-[[(alpha-L-daunosaminyl)oxy]methyl]-7,8,9,10-tetrahydronaphthacene-5,12-dione hydrochloride ((-)-13), a mimic of idarubicin, was also prepared. Absorbance and fluorescence titration experiments showed (-)-8, (-)-9, and (-)-10 to intercalate calf thymus DNA whereas (-)-11, (-)-12, and (-)-13 did not. The best intercalator was (-)-9 (K(b) = (1.1 +/- 0.1) x 10(5) M(-)(1)) with the [(4'-aminobutyl)oxy]methyl chain. Inhibition of topoisomerase II-induced DNA strand religation was observed for (-)-8 at a concentration of 50 &mgr;M.     

Synthesis and pharmacological effects of optically active 2-[4-(4-benzhydryl-1-piperazinyl)phenyl]-ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(3-nitrophenyl)-3,5-pyridinedicarboxylate hydrochloride

Optically active 2-[4-(4-benzhydryl-1-piperazinyl)phenyl]ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(3-nitrophenyl)-3,5-pyridinedicarboxylate [(S)-(+)-1 and (R)-(-)-1] hydrochlorides were synthesized with high optical purities from (R)-(-)- and (S)-(+)-1,4-dihydro-5-methoxycarbonyl-2,6-dimethyl-4-(3-nitrophenyl)- 3-pyridinecarboxylic acids [(R)-(-)-6 and (S)-(+)-6], which are available from (+/-)-6 by optical resolution using quinidine and cinchonidine, respectively. From pharmacological investigations of (S)-(+)-1 and (R)-(-)-1 such as the antihypertensive effect on spontaneously hypertensive rats and inhibition of [3H]nimodipine binding to rat cardiac membrane homogenate, the active form of 1 was defined to be the (4S)-(+)-enantiomer of 1.     

Kinetics and mechanisms of S(IV) reductions of bromite and chlorite ions

The reaction of bromite with aqueous S(IV) is first order in both reactants and is general-acid catalyzed. The reaction half-lives vary from 5 ms (p[H+] 5.9) to 210 s (p[H+] 13.1) for 0.7 mM excess S(IV) at 25 degrees C. The proposed mechanism includes a rapid reaction (k(1) = 3.0 x 10(7) M(-1) s(-1)) between BrO(2)(-) and SO(3)(2-) to form a steady-state intermediate, (O(2)BrSO(3))(3-). General acids assist the removal of an oxide ion from (O(2)BrSO(3))(3-) to form OBrSO(3)(-), which hydrolyzes rapidly to give OBr(-) and SO(4)(2-). Subsequent fast reactions between HOBr/OBr(-) and SO(3)(2-) give Br(-) and SO(4)(2-) as final products. In contrast, the chlorite reactions with S(IV) are 5-6 orders of magnitude slower. These reactions are specific-acid, not general-acid, catalyzed. In the proposed mechanism, ClO(2)(-) and SO(3)H(-)/SO(2) react to form (OClOSO(3)H)(2)(-) and (OClOSO(2))(-) intermediates which decompose to form OCl(-) and SO(4)(2-). Subsequent fast reactions between HOCl/OCl(-) and S(IV) give Cl- and SO(4)(2-) as final products. SO(2) is 6 orders of magnitude more reactive than SO(3)H-, where k(5)(SO(2)/ClO(2)(-)) = 6.26 x 10(6) M(-1) s(-1) and k(6)(SO(3)H(-)/ClO(2)(-)) = 5.5 M(-1) s(-1). Direct reaction between ClO(2)(-) and SO(3)(2-) is not observed. The presence or absence of general-acid catalysis leads to the proposal of different connectivities for the initial reactive intermediates, where a Br-S bond forms with BrO(2)(-) and SO(3)(2-), while an O-S bond forms with ClO(2)(-) and SO(3)H-.     

Linked porphyrin systems

Porphyrin monomers, 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin ( 1 ), 5,10-(dipyridyl)-15,20-(diphenyl)-porphyrin ( 2 ), and 5,15-(dipyridyl)-10,20-{diphenyl)porphyrin ( 3 ), were linked by hydrocarbon chains to form a series of dimers, trimers and polymers. The 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin monomers were linked by 2, 4, 6, 8 and 10 carbon chains through the alkylation of the pyridine nitrogens using the appropriate diiodoalkane to form positively charged linked dimers 4–8 . A trimer 12 was synthesized from two 5-(monopyridyl)-10,15,20-(triphenyl)porphyrin and one 5,10-(dipyridyl)-15,20-(diphenyl)porphyrin linked by a six carbon chain. Hydrocarbon linked (5,10-(dipyridyl)-15,20-(diphenyl)porphyrin)_n ( 13 ) and (5,15-(dipyridyl)-10,20-(diphenyl)porphyrin)_n ( 14 ) were also prepared.     

Synthesis,optical, and spectroscopic characterisation of substituted 3-phenyl-2-arylacrylonitriles

The Knoevenagel condensation between aldehydes and substrates with active methylene groups was applied to synthesise a series of 3-(4-substituted phenyl)-2-arylacrylonitriles (aryl = phenyl or pyridyl). Chloro-, fluoro-, or dimethylamino-substituted aryls and a cyano group attached to the double bond of acrylonitrile were studied. Previous studies showed that the condensation products were E isomers. The compounds synthesised were: 3-(4-chlorophenyl)-2-phenylacrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-chlorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-fluorophenyl)-2-phenylacrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-3-yl)acrylonitrile, 3-(4-fluorophenyl)-2-(pyridin-4-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-phenylacrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-2-yl)acrylonitrile, 3-(4-dimethylaminophenyl)-2-(pyridin-3-yl)acrylonitrile, and 3-(4-dimethylaminophenyl)-2-(pyridin-4-yl)acrylonitrile. Structures were confirmed by IR, MS, and NMR spectral data. Molar absorption coefficient, absorbance, and fluorescence emission spectra were compared in order to evaluate the effects of substituents on phenyl and the position of nitrogen in pyridine moiety on the electronic properties of acrylonitrile derivatives prepared.     

2-芳基吲哚的敏化光氧化偶合反应

本文研究了十七种2-芳基吲哚(1a-1q)在甲醇-乙酸介质中的亚甲基蓝(MB)敏化光氧化反应, 发现有十五种吲哚(1a-1o)以85%-95%的产率给出2,2'-二芳基-[2,3'-联-1H-吲哚]-3(2H)-酮(2a-2o), 而2-(4-硝基苯基]吲哚(1p)和2-联苯基吲哚(1q)则分别生成2-甲氧基-2-(4-硝基苯基)-1,2-二氢-3H-吲哚-3-酮(7p)和2-联苯基-4H-3,1-苯并恶嗪-4-酮(11q), 其中7p在分离过程中失去甲醇分子给出2-(4-硝基苯基)-3H-吲哚-3-酮(10p)。     

The first enantiomerically pure [n]triangulanes and analogues: sigma-[n]helicenes with remarkable features

(M)-(-)- and (P)-(+)-Trispiro[2.0.0.2.1.1]nonanes [(M)- and (P)-3] as well as (M)-(-)- and (P)-(+)-tetraspiro[2.0.0.0.2.1.1.1]undecanes [(M)- and (P)-4]-enantiomerically pure unbranched [4]- and [5]triangulanes-have been prepared starting from racemic bicyclopropylidenecarboxylic [(1RS)-12] and exo-dispiro[2.0.2.1]heptane-1-carboxylic [(1RS,3SR)-13] acids. The optical resolutions of rac-12 and rac-13 furnished enantiomerically pure acids (S)-(+)-12, (R)-(-)-12, (1R,3S)-(-)-13, and (1S,3R)-(+)-13. The ethyl ester (R)-25 of the acid (R)-(-)-12 was cyclopropanated to give carboxylates (1R,3R)-26 and (1R,3S)-26. The ester (1R,3S)-26 and acids (1R,3S)-13 and (1S,3R)-13 were converted into enantiomerically pure methylene[3]triangulanes (S)-(-)- and (R)-(+)-28. An alternative approach consisted of an enzymatic deracemization of endo-[(1SR,3SR)-dispiro[2.0.2.1]heptyl]methanol (rac-20) or anti-[(1SR,3RS)-4-methylenespiropentyl]methanol (rac-18). This afforded (S)-(-)- and (R)-(+)-28 (starting from rac-20), as well as enantiomerically pure (M)-(-)- and (P)-(+)-1,4-dimethylenespiropentanes [(M)- and (P)-23] starting from rac-18. The methylenetriangulanes (S)-(-)- and (R)-(+)-28 were cyclopropanated furnishing (M)- and (P)-3. The rhodium-catalyzed cycloaddition of ethyl diazoacetate onto (S)-(-)- and (R)-(+)-28 yielded four diastereomeric ethyl trispiro[2.0.0.2.1.1]nonane-1-carboxylates in approximately equal proportions. The enantiomerically pure esters (1R,3S,4S)- and (1S,3R,4R)-30 were isolated by careful distillation and then transformed into [5]triangulanes (M)- and (P)-4 using the same sequence of reactions as applied for (M)- and (P)-3. The structures of the key intermediates (R)-12 and rac-31 were confirmed by X-ray analyses. Although [4]- and [5]triangulanes have no chromophore which would lead to any significant absorption above 200 nm, they have remarkably high specific rotations even at 589 nm with [alpha](20)D=-192.7 [(M)-3, c=1.18, CHCl(3))] or +373.0 [(P)-4, c=1.18, CHCl(3))]. This remarkable optical rotatation is in line with their helical arrangement of sigma bonds, as confirmed by a full valence space single excitation configuration interaction treatment (SCI) in conjunction with DFT computations at the B3LYP/TZVP//B3LYP/6-31+G(d,p) level of theory which reproduce the ORD very well. Thus, it is appropriate to call the helically shaped unbranched [n]triangulanes the "sigma-[n]helicenes", representing the sigma-bond analogues of the aromatic [n]helicenes.     

Studies of the kinetics and thermochemistry of the forward and reverse reaction Cl + C6H6 = HCl + C6H5

The laser flash photolysis resonance fluorescence technique was used to monitor atomic Cl kinetics. Loss of Cl following photolysis of CCl4 and NaCl was used to determine k(Cl + C6H6) = 6.4 x 10(-12) exp(-18.1 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 578-922 K and k(Cl + C6D6) = 6.2 x 10(-12) exp(-22.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 635-922 K. Inclusion of literature data at room temperature leads to a recommendation of k(Cl + C6H6) = 6.1 x 10(-11) exp(-31.6 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) for 296-922 K. Monitoring growth of Cl during the reaction of phenyl with HCl led to k(C6H5 + HCl) = 1.14 x 10(-12) exp(+5.2 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 294-748 K, k(C6H5 + DCl) = 7.7 x 10(-13) exp(+4.9 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 292-546 K, an approximate k(C6H5 + C6H5I) = 2 x 10(-11) cm(3) molecule(-1) s(-1) over 300-750 K, and an upper limit k(Cl + C6H5I) < or = 5.3 x 10(-12) exp(+2.8 kJ mol(-1)/RT) cm(3) molecule(-1) s(-1) over 300-750 K. Confidence limits are discussed in the text. Third-law analysis of the equilibrium constant yields the bond dissociation enthalpy D(298)(C6H5-H) = 472.1 +/- 2.5 kJ mol(-1) and thus the enthalpy of formation Delta(f)H(298)(C6H5) = 337.0 +/- 2.5 kJ mol(-1).     

铜(Ⅰ)配合物的不对称催化1,4-共轭加成反应

以两个新型手性配体S-(+)-2-(2-吡啶酰胺基)-2'-(二苯基膦基)-1,1'-联苯(1a)和S-(+)-2-(6-甲基-2-吡啶酰胺基)-2'-(二苯基膦基)-1,1'-联萘(1b)的铜配合物催化的二乙基锌对开链烯酮的1,4-共轭加成反应的研究。以1a为标准配体,查耳酮为代表性底物,考察了溶剂、催化剂前体等因素对反应的影响。在优化条件下,系统研究了以[Cu(OTf)](C~6H~6)~1~/~2/1b为催化剂,甲苯-二氯乙烷为溶剂时进行了二乙基锌对七个开链烯酮的1,4-共轭加成反应,取得了突破性进展,获得最高达98%e.e.值的加成产物。     

Increased sensitivity of an enzyme immunoassay (ELISA) for the determination of triazine herbicides by variation of tracer incubation time

Immunoassays for triazine herbicides were tested for their reaction to the variation of the tracer incubation time. By application of a sequential technique the measuring range of atrazine could be expanded to five decades and the total duration of the test could be reduced to about 30 min. In an optimized version a lower detection limit of 9 pmol/l (2 ng/l) was achieved. The detection limit of a sensitive immunoassay for terbuthylazine is also below the concentration limit demanded of the German drinking water regulation (100 ng/l) and reaches 130 pmol/l (30 ng/l). Short tracer incubation times did not lead to increased cross-reactivities in contrast to theoretical models [1, 2]. Different mechanisms, which could cause a shift of the center point of the calibration curve, are discussed, including kinetic considerations.Nomenclature ametryn 2-(ethylamino)-4-(isopropylamino)-6-(methylthio)-1,3,5-triazine - atrazine 2-(chloro)-4-(ethylamino)-6-(isopropylamino)-1,3,5-triazine - deethylatrazine 2-(amino)-4-(chloro)-6-(isopropylamino)-1,3,5-triazine - DMSO dimethylsulfoxide - DOC dissolved organic carbon - ELISA enzyme-linked immunosorbent assay - glyme 1,2-dimethoxyethane - hydroxyatrazine 2-(ethylamino)-4-(hydroxy)-6-(isopropylamino)-1,3,5-triazine - PBS phosphate buffered saline - propazine 2-(chloro)-4,6-bis(isopropylamino)-1,3,5-triazine - simazine 2-(chloro)-4,6-bis(ethylamino)-1,3,5-triazine - terbuthylazine 2-(tert-butylamino)-4-(chloro)-6-(ethylamino)-1,3,5-triazine - TLC thin-layer chromatography - TMB 3,3,5,5-tetramethylbenzidine - tracer enzyme (peroxidase) labeled hapten     

Why are SiX5(-) and GeX5(-) (X = F, Cl) stable but not CF5(-) and CCl5(-)?

The possible existence of the CF(5)(-), CCl(5)(-), SiF(5)(-), SiCl(5)(-), GeF(5)(-), and GeCl(5)(-) anions has been investigated using ab initio methods. The species containing Si and Ge as central atoms were found to adopt the D(3h)-symmetry trigonal bipyramidal equilibrium structures whose thermodynamic stabilities were confirmed by examining the most probable fragmentation channels. The ab initio re-examination of the electronic stabilities of the SiF(5)(-), SiCl(5)(-), GeF(5)(-), and GeCl(5)(-) anions [using the OVGF(full) method with the 6-311+G(3df) basis set] led to the very large vertical electron detachment (VDE) energies of 9.316 eV (SiF(5)(-)) and 9.742 eV (GeF(5)(-)), whereas smaller VDEs of 6.196 and 6.452 eV were predicted for the SiCl(5)(-) and GeCl(5)(-) species, respectively. By contrast, the high-symmetry and structurally compact anionic CF(5)(-) and CCl(5)(-) systems cannot exist due to the strongly repulsive potential predicted for the X(-) (F(-) or Cl(-)) approaching the CX(4) (CF(4) or CCl(4)). The formation of weakly bound CX(4)···X(-) (CF(4)···F(-) and CCl(4)···Cl(-)) anionic complexes (consisting of pseudotetrahedral neutral CX(4) with the weakly tethered X(-)) might be expected at low temperatures (approaching 0 K), whereas neither CX(5)(-) (CF(5)(-), CCl(5)(-)) systems nor CX(4)···X(-) (CF(4)···F(-) and CCl(4)···Cl(-)) complexes can exist in the elevated temperatures (above 0K) due to their susceptibility to the fragmentation (leading to the X(-) loss).     

Conformations of dimethylhydrogen phosphonate (DMHP): a matrix isolation infrared and ab initio study

The infrared spectra of dimethylhydrogen phosphonate (DMHP) isolated in nitrogen, argon and krypton matrices using an effusive source at 298 and 373 K have been recorded. Experiments were also performed using a supersonic jet source to look for conformational cooling in the expansion process. As a result of these experiments, infrared spectral characteristics of the ground and higher energy conformers of the DMHP have been identified for the first time. The structures of DMHP were optimized at the hybrid B3LYP and Hartree fock (HF) levels of theory using the 6-31++G** basis sets. Computationally, four minima were obtained corresponding to DMHP conformers with G (+/-)G (-/+), G (-)G (-), TG (+) and TG (-) structures in the order of increasing energy. Frequency calculations were done to confirm that the structures were indeed minima on the potential energy surface (PES). The computed frequencies corroborated well with the experimental matrix isolation infrared frequencies leading to definite assignments of the infrared features of DMHP, for the G (+/-)G (-/+) and TG (+) conformers. At B3LYP/6-31++G** level, the energy difference between the G (+/-)G (-/+) and G (-)G (-) conformer was 1.53 kcal/mol, and that between G (+/-)G (-/+) and TG (+), G (+/-)G (-/+) and TG (-) were 1.65 and 1.95 kcal/mol. Transition-state calculations were also carried out at B3LYP/6-31++G** level connecting the G (+/-)G (-/+) to G (-)G (-), TG (+) and TG (-) conformers. Computations indicated that the conformer interconversion between G (-)G (-) --> G (+/-)G (-/+) is barrierless, whereas the barriers for TG (+) --> G (+/-)G (-/+) and TG (-) --> G (+/-)G (-/+) are 1.47 and 0.88 kcal/mol, respectively.     

Optically active antifungal azoles. XI. An alternative synthetic route for 1

New routes for the synthesis of the optically active antifungal triazoles 1-[(1R,2R)-2-(2,4-difluorophenyl)-2-hydroxy-1-methyl-3-(1H-1,2,4-triazol-1-yl)propyl]-3-[4-(1H-1-tetrazolyl)phenyl]-2-imidazolidinone (1b) and the 3-14-(1H-1,2,3-triazol-1-yl)phenyl]-2-imidazolidinone analog (1a) that possess an imidazolidine nucleus were established. The key synthetic intermediates, (2R,3R)-3-(2,2-diethoxvethyl)amino-2-(2,4-difluorophenyl)-1-(1H1,2,4-triazol-1-yl)-2-butanol (8) and (2R,3R)-2-(2,4-difiuorophenyl)-3-(2-h ydroxyethyl)amino-1-(1H-1,2,4-triazol-1-yl)-2-butanol (14), were prepared by the ring-opening reaction of the oxirane (2) with the corresponding 2-substituted ethylamines. The acetal (8) was converted to the imidazolidinones (1a, b) by condensation with the carbamates (10a, b) followed by treatment with hydrochloric acid and subsequent catalytic hydrogenation. The candidate selected for the clinical trials, 1b (TAK-456), was alternatively prepared from the hydroxyethylamino intermediate (14) via two reaction steps: condensation with the carbamate (10b) to the urea (15) and subsequent cyclization to the imidazolidinones. This newly developed synthetic route could be applied to a large scale preparation of 1b.     

Microbial enantioselective ester hydrolysis for the preparation of optically active 4,1-benzoxazepine-3-acetic acid derivatives as squalene synthase inhibitors

Microbial enantioselective ester hydrolysis for the preparation of optically active (3R,5S)-(-)-5-phenyl-4,1-benzoxazepine-3-acetic acid derivatives as potent squalene synthase inhibitors was investigated. Pseudomonas diminuta and Pseudomonas taetrolens hydrolyzed the racemic ethyl ester of the 5-(2-chlorophenyl) analogue to yield the (-)-carboxylic acid with excellent enantiomeric excess (>99% ee). We found that the (-)-enantiomer was an active inhibitor. Bulkiness of the ester moiety did not affect the enantioselectivity but did affect reactivity. The racemic ethyl ester of the 5-(2-methoxyphenyl) analogue, 5-(2,3-dimethoxyphenyl) analogue and 5-(2,4-dimethoxyphenyl) analogue were also hydrolyzed with Pseudomonas taetrolens to afford enantiomerically pure (-)-carboxylic acids in large scale. As another route to (3R,5S)-(-)-7-chloro-5-(2,3-dimethoxyphenyl)-1-neopentyl-2-oxo-1,2,3,5-tetrahydro-4,1-benzoxazepine-3-acetic acid [(-)-1c], the earlier intermediate (-)-2-amino-5-chloro-alpha-(2,3-dimethoxyphenyl)benzyl alcohol [(-)-12] was successfully obtained by asymmetric hydrolysis of (+/-)-5-chloro-alpha-(2,3-dimethoxyphenyl)-2-pivaloylaminobenzyl acetate with Pseudomonas sp. S-13 with >99% ee in kilogram scale followed by alkaline treatment. The product (-)-12 was converted to (-)-1c without racemization.     

Pulse radiolysis studies on galactose oxidase

Single-Cu-containing galactose oxidase in the GOase(semi) state (Cu(II), no Tyr(*) radical) reacts with pulse radiolysis generated formate radicals CO(2)(*-) to give an intermediate UV-vis spectrum assigned as RSSR(*-), peak at 450 nm (epsilon = 8100 M(-1) cm(-1)). From a detailed kinetic analysis at 450 nm, pH 7.0, the following steps have been identified. First the strongly reducing CO(2)(*-) (-1.9V) reduces GOase(semi) (k(0) > or = 6.5 x 10(8) M(-1) s(-1)) to a species GOase(semi)(*-). This is followed by biphasic reactions (i) GOase(semi)(*-) + GOase(semi) (k(1) = 1.6 x 10(7) M(-1) s(-1)) to give GOase(semi) + P(*-) and (ii) P(*-) + GOase(semi) (k(2) = 6.7 x 10(6) M(-1) s(-1)) to give GOase(semi)RSSR(*-). There are no significant absorbance changes for the formation of GOase(semi)(*-) and P(*-), which are Cu(I) (or related) species. However, GOase(semi)RSSR(*-) has an absorption spectrum which differs significantly from that of GOase(semi). The 450 nm peak is characteristic of an RSSR(*-) radical with two cysteines in close sequence proximity and is here assigned to Cys515-Cys518, which is at the GOase surface and 10.2 A from the Cu. On chemical modification of the RSSR group with HSPO(3)(2-) to give RSSPO(3)H(-) and RS(-), absorbance changes are approximately 50% of those previously observed. The decay of RSSR(*-) (0.17 s(-1)) results in the formation of GOase(red). No RSSR(*-) formation is observed in the reaction of GOase(semi) Tyr495Phe with CO(2)(*-), and a single process giving GOase(red)Tyr495Phe occurs. Similarly in the reaction of GOase(ox) with CO(2)(*-), a single-stage reaction gives GOase(semi).     

Lipase-catalyzed asymmetric synthesis of desprenyl-carquinostatin A and descycloavandulyl-lavanduquinocin

An asymmetric synthesis of the core carbazole structure, 6-desprenyl-carquinostatin 3 and 6-descycloavandulyl-lavanduquinocin 3, toward a total synthesis of carquinostatin A (1) and lavanduquinocin (2), has been established. Lipase QLM (Meito) catalyzed enantioselective acetylation of the racemic alcohol 6 gave the (-)-acetate 7 and the (+)-alcohol 6 with high enantioselectivity. The absolute stereochemistry of the (-)- and (+)-alcohol 6 have been determined to be R- and S-configurations, respectively, by the advanced Mosher method. In the same manner, the (-)-acetate 13 and the (+)-alcohol 12 have been obtained from the racemic alcohol 12. The (R)-(-)-acetate 13, derived from the (R)-(-)-acetate 7, was the same as the (-)-acetate 13, which has been determined to be (R)-configuration. Oxidation of the (R)-(-)-acetate 13 followed by hydrolysis afforded (R)-(-)-6-desprenyl-carquinostatin [and (R)-(-)-6-descycloavandulyl-lavanduquinocin] 3. In addition, oxidation of the (S)-(+)-alcohol 12 provided (S)-(+)-3, which is the enantiomer of 6-desprenyl-carquinostatin A (R)-(-)-3.     

Kinetics and mechanism of the cleavage of phthalic anhydride in glacial acetic acid solvent containing aniline

Apparent second-order rate constants (k(n)(app)) for the nucleophilic reaction of aniline (Ani) with phthalic anhydride (PAn) vary from 6.30 to 7.56 M(-1) s(-1) with the increase of temperature from 30 to 50 degrees C in pure glacial acetic acid (AcOH). However, the values of pseudo-first-order rate constants (k(s)) for the acetolysis of PAn in pure AcOH increase from 16.5 x 10(-4) to 10.7 x 10(-3) s(-1) with the increase of temperature from 30 to 50 degrees C. The values of k(n)(app) and k(s) vary from 5.84 to 7.56 M(-1) s(-1) and from 35.1 x 10(-4) to 12.4 x 10(-4) s(-1), respectively, with the increase of CH(3)CN content from 1% to 80% v/v in mixed AcOH solvents at 35 degrees C. The plot of k(s) versus CH(3)CN content shows a minimum (with 10(4) k(s) = 4.40 s(-1)) at 50% v/v CH(3)CN. Similarly, the variations of k(n)(app) and k(s) with the increasing content of tetrahydrofuran (THF) in mixed AcOH solvent reveal respective a maximum (with k(n)(app) = 17.5-15.6 M(-1) s(-1)) at 40-60% v/v THF and a minimum (with k(s) = approximately 0-1.2 x 10(-4) s (-1)) at 60-70% v/v THF. The respective values of DeltaH* and DeltaS* are 15.3 +/- 1.2 kcal mol(-1) and -20.1 +/- 3.8 cal K(-1) mol(-1) for k(s) and 1.1 +/- 0.5 kcal mol(-1) and -51.2 +/- 1.7 cal K(-1) mol(-1) for k(n)(app), while the values of k(n) (= k(n)(app)/f(b) with f(b) representing the fraction of free aniline base) are almost independent of temperature within the range 30-50 degrees C. A spectrophotometric approach has been described to determine f(b) in AcOH as well as mixed AcOH-CH(3)CN and AcOH-THF solvents. Thus, the observed data, obtained under different reaction conditions, have been explained quantitatively. An optimum reaction condition, within the domain of present reaction conditions, has been suggested for the maximum yield of the desired product, N-phenylphthalamic acid.     

Circular dichroism spectra and absolute configuration of some aryl methyl sulfoxides

The absorption and circular dichroism (CD) spectra of three aryl sulfoxides, i.e. (-)-(S)-1-naphthyl methyl sulfoxide, (S)-1, (-)-(S)-1-(2-methyl)naphthyl methyl sulfoxide, (S)-2 and (-)-(S)-9-phenanthryl methyl sulfoxide, (S)-3, have been interpreted by means of the coupled oscillator model formulated by DeVoe. Theoretical spectra have been calculated starting from input geometries provided by molecular mechanics (MMX) calculations and by employing standard spectroscopic parameters to describe the allowed transitions of the aromatic and the sulfoxide chromophores. The satisfactory agreement between the predicted and experimental spectra allows us to confirm the configurational assignment of these compounds as (-)/(S). The analysis of CD spectra, affording the right assignment of the absolute configuration (AC) of the alkyl aryl sulfoxides, then offers a practical alternative to the more complex vibrational circular dichroism spectroscopy and ab initio optical rotation calculation techniques that have been used very recently to assign the AC of (-)-2 and (-)-3.     

Simultaneous determination of Cl(-), Br(-), I(-) and F(-) with flow-injection/ion-selective electrode systems

Flow-through ion-selective electrodes were constructed from compressed pellets (8-10 mm thick, 13 mm diameter, 10 tons/cm(2) pressure) of Ag(2)S/AgX (X = Cl(-), Br(-) or I(-)) drilled longitudinally (1.5 mm diameter hole) to be suitable for use in flow-injection analysis. A column of AgCl (5.5 cm long, 2-3 mm i.d.) was included in the Cl(-)-electrode manifold to remove interferences from 10(-4)M Br(-) and 3 x 10(-5)M I(-) and S(2-). A column of amalgamated lead (2-3 cm long, 2-3 mm i.d.) was used in the Br(-) electrode manifold to remove interference from 2 x 10(-5)M I(-), 3 x 10(-5)M S(2-) and 7 x 10(-4)M Cl(-). These columns and the addition of ascorbic acid were not required when I(-) was determined with the iodide electrode. The carrier stream was 0.1M sodium perchlorate (pH 4) at a flow-rate of 0.5 ml/min. The sample pH could be 4-7. Simultaneous determination of Cl(-) and I(-), Cl(-), I(-) and Br(-) and Cl(-), I(-), Br(-) and F(-) ions was possible with combinations of the corresponding electrodes and columns in series and/or parallel in specially designed manifolds. Calibration plots were linear, with almost theoretical slopes, down to 10(-6)M I(-), 5 x 10(-6)M Br(-), 10(-4)M Cl(-) and 5 x 10(-6)M F(-), with precision better than 1%. Sampling rates for single-ion determinations were 72, 102, 90 and 80 per hr for the one-, two-, three- and four-electrode systems respectively. Determinations of these ions in water samples by the recommended procedure and by established batch methods showed no significant difference at the 95% confidence limits in a paired comparison t-test.     

Monocarbaborane anion chemistry. [COOH], [CH2OH] and [CHO] units as functional groups on ten-vertex monocarbaborane anionic compounds

B(10)H(14) reacts with para-C(6)H(4)(CHO)(COOH) in aqueous KOH solution to give the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-COOH)](-) anion 1, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-COOH)](-) anion 2. Upon heating, anion 2 rearranges to form the [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-COOH)](-) anion 3. Similarly, B(10)H(14) with glyoxylic acid OHCCOOH in aqueous KOH gives the [arachno-6-CB(9)H(13)-6-(COOH)](-) anion 4, which undergoes cage closure with iodine in alkaline solution to give the [closo-2-CB(9)H(9)-2-(COOH)](-) anion 5. Upon heating, anion 5 rearranges to give the [closo-1-CB(9)H(9)-1-(COOH)](-) anion 6. Reduction of the [COOH] anions 3 and 6 with diisobutylaluminium hydride gives the [CH(2)OH] hydroxy anions [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) and [closo-1-CB(9)H(9)-1-(CH(2)OH)](-) 8 respectively. The [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CH(2)OH)](-) anion 7 can also be made via isomerisation of the [closo-2-CB(9)H(9)-2-(C(6)H(4)-para-CH(2)OH)](-) anion 9, in turn obtained from the [nido-6-CB(9)H(11)-6-(C(6)H(4)-para-CH(2)OH)](-) anion 10, which is obtained from the reaction of B(10)H(14) with terephthaldicarboxaldehyde, C(6)H(4)-para-(CHO)(2), in aqueous KOH solution. Oxidation of the hydroxy anions 7 and 8 with pyridinium dichromate gives the aldehydic [closo-1-CB(9)H(9)-1-(C(6)H(4)-para-CHO)](-) anion 11 and the aldehydic [closo-1-CB(9)H(9)-1-(CHO)](-) anion 12 respectively, characterised as their 2,4-dinitrophenylhydrazone derivatives, the [closo-1-CB(9)H(9)-1-C(6)H(4)-para-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion 13 and the [closo-1-CB(9)H(9)-1-CH=N-NHC(6)H(3)(NO(2))(2)](-) anion respectively.