Comparative study of the nature of chemical bonding of corrugated graphene on Ru(0001) and Rh(111) by electronic structure calculations

Recently, atomic resolved scanning tunneling microscopy investigations revealed that, depending on the substrate (Ni(111), Ru(0001), Ir(111), Pt(111), Rh(111)), graphene overlayer might present regular corrugation patterns, with periodically repeated units of a few nanometers. Variations of the interactions at the interface and the modulation of the local electronic properties are associated with the exact atomic arrangement of the carbon pairs with respect to the metal atoms of the substrate. Better understanding of the atomic structure and of the chemical bonding between graphene and the underlying transition metal is motivated by the fundamental scientific relevance of such systems, but it is also crucial in the perspective of possible applications. With the present work, we propose model systems for the two interfaces showing the most pronounced corrugation patterns, i.e. graphene/Ru(0001) and graphene/Rh(111). Our goal is to understand the nature of the interactions by means of electronic structure calculations based on Density Functional Theory. Our simulations qualitatively reproduce very well experimental results such as the STM topographies and the electrostatic potential maps, and quantitatively provide the closest agreement that has been published so far. The detailed analysis of the electronic structure at the interface highlights similarities and differences by changing the supporting transition metal. Our results point to a fundamental role of the hybridization between the π orbitals of graphene with the d band of the metal in determining the specific corrugation of the adsorbed monolayer. It is shown that differences in the response of the graphene electronic structure to the interaction with the metal can hinder the hybridization and lead to substantially different structures.     

Synthesis of epitaxial graphene on rhodium from 3-pentanone

The synthesis of high quality single layer graphene on rhodium, g/Rh(111), is reported. The graphene layers are grown at 1060 K by low pressure chemical vapor deposition (CVD) using 3-pentanone as a precursor molecule. The presented growth technique shows an easy high quality production method for epitaxial graphene monolayers. The chemical composition and structural properties of such self-assembled monolayers were characterized by X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED). Scanning Tunneling Microscopy (STM) confirms the formation of a 3 nm super cell and a unique surface morphology which establishes the potential of g/Rh(111) as a template for molecules.     

石墨烯-六方氮化硼面内异质结构的扫描隧道显微学研究

石墨烯-六方氮化硼面内异质结构因可调控石墨烯的能带结构而受到广泛关注. 本文介绍了在超高真空体系内, 利用两步生长法在两类对石墨烯分别有强和弱电子掺杂的基底, 即Rh(111)和Ir(111)上制备石墨烯-六方氮化硼单原子层异质结构. 通过扫描隧道显微镜及扫描隧道谱对这两种材料的形貌和电子结构进行研究发现: 石墨烯和六方氮化硼倾向于拼接生长形成单层的异质结构, 而非形成各自分立的畴区; 在拼接边界处, 石墨烯和六方氮化硼原子结构连续无缺陷; 拼接边界多为锯齿形型, 该实验结果与密度泛函理论计算结果相符合; 拼接界面处的石墨烯和六方氮化硼分别具有各自本征的电子结构, 六方氮化硼对石墨烯未产生电子掺杂效应.     

Triphenylene adsorption on Cu(111) and relevant graphene self-assembly

Investigations on adsorption behavior of triphenylene(TP) and subsequent graphene self-assembly on Cu(111) were carried out mainly by using scanning tunneling microscopy(STM).At monolayer coverage,TP molecules formed a longrange ordered adsorption structure on Cu(111) with an uniform orientation.Graphene self-assembly on the Cu(111) substrate with TP molecules as precursor was achieved by annealing the sample,and a large-scale graphene overlayer was successfully captured after the sample annealing up to 1000 K.Three different Moire patterns generated from relative rotational disorders between the graphene overlayer and the Cu(111) substrate were observed,one with 40 rotation between the graphene overlayer and the Cu(111) substrate with a periodicity of 2.93 nm,another with 70 rotation and 2.15 nm of the size of the Moire supercell,and the third with 100 rotation with a periodicity of 1.35 nm.     

Ordered vacancy network induced by the growth of epitaxial graphene on Pt(111)

We have studied large areas of (√3×√3)R30° graphene commensurate with a Pt(111) substrate. A combination of experimental techniques with ab initio density functional theory indicates that this structure is related to a reconstruction at the Pt surface, consisting of an ordered vacancy network formed in the outermost Pt layer and a graphene layer covalently bound to the Pt substrate. The formation of this reconstruction is enhanced if low temperatures and polycyclic aromatic hydrocarbons are used as molecular precursors for epitaxial growth of the graphene layers.     

Two-dimensional nanoscale self-assembly on a gold surface by spinodal decomposition

The structure formation upon spinodal decomposition of a two-dimensional model system, a Au adatom gas on a Au(111) surface, was observed in situ by scanning tunneling microscopy (STM). A thermodynamically unstable state was prepared by applying microsecond voltage pulses to the STM tip in an electrochemical system, causing the random dissolution of Au atoms from the uppermost monolayer. Interconnected, labyrinthine island patterns were formed at Au coverages between 0.4 and 0.9 monolayer with dominating length scales lambda(m) of the order of a few nanometers.     

Epitaxial growth of graphene on transition metal surfaces: chemical vapor deposition versus liquid phase deposition

The epitaxial growth of graphene on transition metal surfaces by ex situ deposition of liquid precursors (LPD, liquid phase deposition) is compared to the standard method of chemical vapor deposition (CVD). The performance of LPD strongly depends on the particular transition metal surface. For Pt(111), Ir(111) and Rh(111), the formation of a graphene monolayer is hardly affected by the way the precursor is provided. In the case of Ni(111), the growth of graphene strongly depends on the applied synthesis method. For CVD of propene on Ni(111), a 1 × 1 structure as expected from the vanishing lattice mismatch is observed. However, in spite of the nearly perfect lattice match, a multi-domain structure with 1 × 1 and two additional rotated domains is obtained when an oxygen-containing precursor (acetone) is provided ex situ.     

Ag growth on Si(111) with an Sb surfactant investigated by scanning tunneling microscopy

We have investigated a room-temperature growth mode of ultrathin Ag films on a Si(111) surface with an Sb surfactant using STM in a UHV system. On the Sb-passivated Si surface, small sized islands were formed up to 1.1 ML. Flat Ag islands were dominant at 2.1 ML, coalescing into larger islands at 3.2 ML. Although the initial growth mode of Ag films on the Sb-terminated Si(111) surface was Volmer-Weber (island growth), the films were much more uniform than Ag growth on clean (Si(111) at the higher coverages. From the analysis of STM images of Ag films grown with and without an Sb surfactant, the uniform growth of Ag films using an Sb surfactant appears to be caused by the kinetic effects of Ag on the preadsorbed Sb layer. Our STM results indicated that Sb suppresses the surface diffusion of Ag atoms and increases the Ag-island density. The increased island density is believed to cause coalescence of Ag islands at higher coverages of Ag, resulting in the growth of atomically flat and uniform Ag islands on the Sb surfactant layer.     

Deposition of metal clusters on single-layer graphene/Ru(0001): Factors that govern cluster growth

Fabrication of nanoclusters on a substrate is of great interest in studies of model catalysts. The key factors that govern the growth and distribution of metal on graphene have been studied by scanning tunneling microscopy (STM) based on different behaviors of five transition metals, namely Pt, Rh, Pd, Co, and Au supported on the template of a graphene moiré pattern formed on Ru(0001). Our experimental findings show that Pt and Rh form finely dispersed small clusters located at fcc sites on graphene while Pd and Co form large clusters at similar coverages. These results, coupled with previous findings that Ir forms the best finely dispersed clusters, suggest that both metal–carbon (M–C) bond strength and metal cohesive energies play significant roles in the cluster formation process and that the M–C bond strength is the most important factor that affects the morphology of clusters at the initial stages of growth. Furthermore, experimental results show Au behaves differently and forms a single-layer film on graphene, indicating other factors such as the effect of substrate metals and lattice match should also be considered. In addition, the effect of annealing Rh on graphene has been studied and its high thermal stability is rationalized in terms of a strong interaction between Rh and graphene as well as sintering via Ostwald ripening.     

Surface diffusion during decay of nano-island on Si(1 0 0) at high temperature

Surface diffusion during decay of a two-dimensional nano-island formed on Si(1 0 0) surface at 750-800 K is studied using STM and a kinetic Monte Carlo simulation. From a surface diffusion point of view, decay proceeds so that the total diffusion rate of atoms on a surface decreases. Atoms at step edges move more frequently than terrace atoms, which results in decay from step edges of the island. In addition, a terrace atom takes part in surface diffusion in the same way as an atom from steps of the island once it hops up on a terrace leaving a vacancy. The mass transport is not a specific atom process but terrace atoms and vacancies on the terrace are involved. Repeated upward and downward hops of atoms and their difference are combined with surface diffusion, which leads to the mass transport. Some tracks of atom using simulation show random walk with preferential diffusion along step edges, re-entering to the island, exchange of diffusing atom and filling in a vacancy on the terrace. The motion of the center of the island to the upper side of the terrace observed by STM is also well reproduced in the simulation.     

Influence of copper crystal surface on the CVD growth of large area monolayer graphene

We study the influence of the surface structure of copper single crystals on the growth of large area monolayer graphene by chemical vapor deposition (CVD) in ultra-high vacuum (UHV). Using atomic-resolution scanning tunneling microscopy (STM), we find that graphene grows primarily in registry with the underlying copper lattice for both Cu(111) and Cu(100). The graphene has a hexagonal superstructure on Cu(111) with a significant electronic component,whereas it has a linear superstructure on Cu(100). Graphene on Cu(111) forms a microscopically uniform sheet, the quality of which is determined by the presence of grain boundaries where graphene grains with different orientations meet. Graphene grown on Cu(100) under similar conditions does not form a uniform sheet and instead displays exposed nanoscale edges. Our results indicate the importance of the copper crystal structure on the microstructure of graphene films produced by CVD.     

The molecular dynamic study of anharmonic effects at Cu(111) and Ag(111) surfaces in the presence of Cu- and Ag-trimer island

The molecular dynamics (MD) technique based on semi-empirical potentials, is used to carry out the diffusion of Cu- and Ag-trimer on Cu- and Ag(111) surface at 300, 500 and 700 K temperatures. The constant energy MD simulation elaborates the anharmonic effects at the surface such as fissures, dislocations and vacancy creation, in the presence of island. The fissures and dislocations formed are in the range of 1.5–4 Å and 1–7 Å, respectively, from the island's position. The Cu and Ag islands both diffuse easily on Cu(111) surface, manipulate that the trend of diffusion is faster on Cu surface as compared to Ag surface. The process of breaking and opening of the island has also been observed. Moreover, a surface atom popped-up at 700 K by creating a vacancy near the Cu island on Ag surface. The rate of diffusion increases with the increase in temperature, both for homo- and hetero-cases.     

Effects of vacancy and deformation on an Al atom adsorbed on graphene

First-principles calculations based on density functional theory are carried out to study the adsorption energy of monovacancy and deformation on an Al atom adsorbed on graphene. The bond length and Mulliken charge of an Al atom adsorbed on intrinsic and defected graphene systems are also analyzed. We find that an Al atom, sitting above the H site of intrinsic graphene, is in the most stable location. And the adsorption energy increases with increasing graphene coverage. In 1/32 Al/VC-gra and 1/8 Al/VC-gra Al—C covalent bonds are formed, and the Al—C ionic bonds are enhanced by the vacancy. For our calculations, vacancy and deformation both enhance the adsorption energy of an Al atom adsorbed on a graphene system, but vacancy is more effective. In a tensile system, a geometric distortion is induced in the adsorption structure when the tensile deformation is greater than 15%; in a compression system, the adsorption structure begins to distort from 5%. When the tensile and compressive deformations are greater than 10%, the compressive deformation is more effective than the tension deformation on an Al atom adsorbed on the graphene system. Especially, when the deformation is relatively small, a vacancy has a greater effect on the adsorption energy of an Al atom adsorbed on graphene.     

Scalable synthesis of graphene on single crystal Ir(111) films

We have investigated single crystal Ir(111) films grown heteroepitaxially on Si(111) wafers with yttria-stabilized zirconia (YSZ) buffer layers as possible substrates for an up-scalable synthesis of graphene. Graphene was grown by chemical vapor deposition (CVD) of ethylene. As surface analytical techniques we have used scanning tunneling microscopy (STM), low-energy electron diffraction, scanning electron microscopy, and atomic force microscopy. The mosaic spread of the metal films was below 0.2° similar to or even below that of standard Ir bulk single crystals, and the films were basically twin-free. The film surfaces could be improved by annealing so that they attained the perfection of bulk single crystals. Depending on the CVD conditions a lattice-aligned graphene layer or a film consisting of different rotational domains were obtained. STM data of the non-rotated phase and of the phases rotated by 14° and 19° were acquired. The quality of the graphene was comparable to graphene grown on bulk Ir(111) single crystals.     

Electronic properties and interfacial coupling in Pb islands on single-crystalline graphene

Introducing metal thin films on two-dimensional (2D) material may present a system to possess exotic properties due to reduced dimensionality and interfacial effects. We deposit Pb islands on single-crystalline graphene on a Ge(110) substrate and studied the nano- and atomic-scale structures and low-energy electronic excitations with scanning tunneling microscopy/spectroscopy (STM/STS). Robust quantum well states (QWSs) are observed in Pb(111) islands and their oscillation with film thickness reveals the isolation of free electrons in Pb from the graphene substrate. The spectroscopic characteristics of QWSs are consistent with the band structure of a free-standing Pb(111) film. The weak interface coupling is further evidenced by the absence of superconductivity in graphene in close proximity to the superconducting Pb islands. Accordingly, the Pb(111) islands on graphene/Ge(110) are free-standing in nature, showing very weak electronic coupling to the substrate.     

Surface defects created by low energy (20 < E < 240 eV) ion bombardment of Ge(001)

Surface defects created on Ge(001) exposed to low energy Xe ions are characterized by in situ scanning tunneling microscopy (STM). The temperature of the sample during ion bombardment is 165 C and ion energies range from 20 to 240 eV. The ion collisions create defects (vacancies and adatoms) which nucleate and form vacancy and adatom islands. For fixed total vacancy creation, the vacancy island number density increases with increasing ion energy: the vacancy island number density is 1.6 × 10⁻²⁰ cm⁻² for 40 eV ion bombardment and increases to 4.4 × 10⁻²⁰ cm⁻² for 240 eV ion bombardment. The increased nucleation rate for vacancies is attributed to clustering of defects. The sputtering yield of Ge(001) is also measured by STM. The sputtering yield for 20 eV ions is approximately 10⁻³ per ion but the net yield for surface defects (sum of adatoms and vacancies) is an order of magnitude higher, 10⁻², due to adatom-vacancy pair creation.     

Corrugated single layer templates for molecules: From h-BN nanomesh to graphene based quantum dot arrays

Functional nano-templates enable self-assembly of otherwise impossible arrangements of molecules. A particular class of such templates is that of sp² hybridized single layers of hexagonal boron nitride or carbon (graphene) on metal supports. If the substrate and the single layer have a lattice mismatch, superstructures are formed. On substrates like rhodium or ruthenium these superstructures have unit cells with ~3-nm lattice constant. They are corrugated and contain sub-units, which behave like traps for molecules or quantum dots, which are small enough to become operational at room temperature. For graphene on Rh(111) we emphasize a new structural element of small extra hills within the corrugation landscape. For the case of molecules like water it is shown that new phases assemble on such templates, and that they can be used as “nano-laboratories” where many individual processes are studied in parallel. Furthermore, it is shown that the h-BN/Rh(111) nanomesh displays a strong scanning tunneling microscopy-induced luminescence contrast within the 3 nm unit cell which is a way to address trapped molecules and/or quantum dots.     

Planar vanadium oxide clusters: two-dimensional evaporation and diffusion on Rh(111)

The formation of novel vanadium oxide cluster molecules by oxidative two-dimensional evaporation from vanadium oxide nanostructures is reported on a Rh(111) metal surface. The structure and stability of the planar V6O12 clusters and the physical origin of their 2D evaporation process have been elucidated by high-resolution scanning tunneling microscopy (STM) and ab initio density functional theory calculations. The surface diffusion of the clusters has been followed in elevated-temperature STM experiments, and the diffusion parameters have been extracted, indicating diffusion by hopping of the entire surface stabilized cluster units.     

Observation of sputtering damage on Au(111)

The morphology of a Au(111) surface has been observed with the STM (scanning tunneling microscope) after ion bombardment with 2.5 keV Ne⁺ ions at about 400 K. Mostly triangular and hexagonal shaped vacancy islands are seen in the STM topographs. They are bounded by monatomic steps, oriented along the closed packed 110 directions. The general morphology confirms the conclusions inferred from TEAS (thermal energy atom scattering) measurements on ion bombarded Pt(111) surfaces. The observation of a propensity for the formation of {100} microfacetted 110 ledges is discussed.     

Formation of Two-Dimensional AgTe Monolayer Atomic Crystal on Ag(111) Substrate

We report on the formation of two-dimensional monolayer AgTe crystal on Ag(111) substrates. The samples are prepared in ultrahigh vacuum by deposition of Te on Ag(111) followed by annealing. Using a scanning tunneling microscope(STM) and low electron energy diffraction(LEED), we investigate the atomic structure of the samples.The STM images and the LEED pattern show that monolayer AgTe crystal is formed on Ag(111). Four kinds of atomic structures of AgTe and Ag(111) are observed:(i) flat honeycomb structure,(ii) bulked honeycomb,(iii)stripe structure,(iv) hexagonal structure. The structural analysis indicates that the formation of the different atomic structures is due to the lattice mismatch and relief of the intrinsic strain in the AgTe layer. Our results provide a simple and convenient method to produce monolayer AgTe atomic crystal on Ag(111) and a template for study of novel physical properties and for future quantum devices.