锁模脉冲波长连续可调谐光纤激光器

利用在腔内加入可调谐光纤光栅滤波器使“8”字形腔掺Yb3+光纤激光器在锁模状态下实现波长连续可调谐.实验中,在保证锁模状态稳定的情况下,通过调节可调谐光纤光栅滤波器,使激光器输出锁模脉冲的中心波长在1 047 nm～1 055 nm范围内连续调谐,重复频率稳定维持在4.9 MHz.在中心波长1 053 nm处,测得锁模脉冲输出平均功率为8.02 mW,光谱带宽1 nm,脉冲宽度为259.3 ps.这种“8”字形腔被动锁模光纤激光器在锁模状态下对波长连续可调谐,并可长时间稳定工作.     

大功率多波长可转换双包层光纤激光器

在多模掺镱双包层光纤上,利用相位掩模法直接写制Bragg光栅作为激光器后腔镜,得到多波长激光输出.在室温下,通过调节偏振控制器可以得到稳定的单波长及多波长的激光输出,输出波长范围在1 056～1 061 nm,线宽均小于0.02 nm.在25 W的976 nm激光泵浦下,激光器得到功率为6 W的多波长输出.     

Wavelength-spacing tunable multiwavelength erbium-doped fiber laser based on four-wave mixing of dispersion-shifted fiber

We experimentally demonstrate a wavelength-spacing tunable multiwavelength erbium-doped fiber laser based on degenerate four-wave mixing in a dispersion-shifted fiber incorporating multiple-fiber Bragg gratings. We have achieved stable operation of the multiwavelength erbium-doped fiber laser, which has 0.8 nm spacing ten-channel lasing wavelengths and a high extinction ratio of more than approximately 45 dB, at room temperature. The output power of the multiwavelength erbium-doped fiber laser is stable, so the peak fluctuation is less than approximately 0.2 dB. By changing the properties such as loss and polarization state of multiple fiber Bragg grating cavities, we can exercise flexible control of the wavelength spacing of the multiwavelength output. We can also obtain switchable multiwavelength lasing operation by elimination of the effects of alternate single-fiber Bragg gratings.     

波长可调谐超短光脉冲的简便高质的生成技术

提出了一种以处于增益开关调制状态下的法布里珀罗(Fabry-Pérot)半导体激光器作为光源,采用简单的自激注入锁定方式,以生成波长可调谐的超短光脉冲的实验系统。该实验装置中,激光器的外腔包括两个串联在一起的布拉格光纤光栅,一个掺铒光纤放大器(EDFA),一个光耦合器和两个环行器,其作用是选模,以及增强并控制反馈回激光器内腔的光强。该实验系统简单而高效,在24nm的波长调谐范围内获得了边模抑制比高于40dB的单模光脉冲输出;而在1521.8nm和1550.0nm之间28.2nm的波长调谐范围内,边模抑制比高于35dB。所得到的各个单波长激光脉冲的时域半峰全宽为140~260ps,各个脉冲的光谱半峰全宽皆为0.1nm。     

基于级联光纤Bragg光栅的外腔半导体激光器三波长同时激射

实现了使用3个级联的光纤Bragg光栅外腔半导体激光器3波长同时激射.3条谱线的峰值波长取决于光纤Bragg光栅的峰值反射波长,分别为1 531.5 nm、1 549.4 nm与1 554.8 nm.注入电流为52 mA时,激光器总输出功率为1 mW.该激光器的主要优点包括,由于输出波长被锁定在光纤Bragg光栅的Bragg波长上,因此输出波长稳定,谱线窄,成本低.可应用于多波长干涉测量以及全光通信等领域中.     

Multi-Wavelength-Switchable Double Clad Yb3+-Doped Fiber Laser Based on Reflectivity Control of Fiber Bragg Gratings by Induced Bend Loss

We propose and demonstrate an all-fiber multi-wavelength switchable double-clad Yb³⁺-doped fiber laser based on the reflectivity cavity control by induced bend loss. The wavelength switching is realized by a variable reflecting mirror that employs a cascaded array of three high reflection (>99%) fiber Bragg gratings at 1064, 1080 and 1096 nm, with a bending controller inserted between each grating. The order of the Bragg gratings is decided according to the gain profile of the Yb³⁺-doped fiber and the induced bending loss allows us to select the Bragg-wavelength laser operation. The laser is capable of switching continuously from one wavelength to another, and slope efficiencies over 50% are obtained at each wavelength.     

高功率2 μm波长可调谐超短脉冲光纤激光器

高功率2 μm波长可调谐的超短脉冲激光具有峰值功率高、脉冲宽度窄、波长可调谐等优势,在医疗手术、大气通信、光电对抗等领域具有广泛的应用。利用高峰值功率的掺铒光纤放大器泵浦高非线性光纤,在全光纤化结构中获得了1895～2165 nm可调谐的拉曼孤子输出。采用啁啾脉冲放大技术对拉曼孤子的脉冲能量进行提升,放大后拉曼孤子的单脉冲能量为1.56 μJ,平均功率达到50.6 W,脉冲宽度为83 ps。经过光栅对压缩后,脉冲宽度降低至1.23 ps,平均功率为22 W,峰值功率达到0.55 MW。放大后的脉冲仍具有波长调谐的能力,当输出功率为5 W和50.6 W时,脉冲的波长调谐范围分别为38 nm和8 nm。     

Observation of stable bound soliton with dual-wavelength in a passively mode-locked Er-doped fiber laser

A phase-locked bound state soliton with dual-wavelength is observed experimentally in a passively mode-locked Erdoped fiber(EDF) laser with a fiber loop mirror(FLM). The pulse duration of the soliton is 15 ps and the peak-to-peak separation is 125 ps. The repetition rate of the pulse sequence is 3.47 MHz. The output power is 11.8 mW at the pump power of 128 mW, corresponding to the pulse energy of 1.52 nJ. The FLM with a polarization controller can produce a comb spectrum, which acts as a filter. By adjusting the polarization controller or varying the pump power, the central wavelength of the comb spectrum can be tuned. When it combines with the reflective spectrum of the fiber Bragg grating, the total spectrum of the cavity can be cleaved into two parts, then the bound state soliton with dual-wavelength at 1549.7 nm and 1550.4 nm is obtained.     

Wavelength and duration tunable soliton generation from a regeneratively mode-locked fiber laser

A 10-GHz soliton source with pulse duration between 4-8 ps and wavelength continuously tunable from 1530 to 1563 nm is presented. Using regeneratively mode-locking technology, the harmonically modelocked fiber ring laser could work without pulse dropout at room temperature when no cavity length or polarization maintaining mechanism is available. Applying only one 980-nm laser diode pump, the average output power reaches more than 4 mW.     

基于级联光纤光栅的双模外腔半导体激光器的实验研究

实现了使用两个级联的光纤Bragg光栅的外腔半导体激光器的双模运转.两个模的峰值波长取决于光纤Bragg光栅的峰值反射波长,分别为1531.5nm与1549.4nm.注入电流为53mA时,两模峰值功率达到均衡为0.5mW,边模抑制比为27dB.     

Wideband wavelength tunable fiber ring laser with flattened output power spectrum

A wavelength tunable erbium-doped fiber ring laser with flattened output power spectrum over a broadband is proposed and demonstrated. The power flattening is achieved using a high-birefringence fiber loop mirror, in which a number of high-birefringence fiber sections and polarization controllers are used to get a reflection spectrum that can compensate for the output power spectrum. The wavelength tuning is realized by compressing or stretching the FBGs in the laser cavity. A 1×3 switchable fiber Bragg grating array is incorporated into the fiber ring to get a wideband tuning range of 38 nm, from 1527 to 1565 nm. Within this range, the output power uniformity is controlled within ±0.8 dB. The total output power is about 4 dBm, the 3-dB linewidth is 0.01 nm, and the side mode suppression ratio is more than 48 dB.     

2080 nm long-wavelength,high-power dissipative soliton resonance in a dumbbell-shaped thulium-doped fiber laser

We demonstrate a 2080 nm long-wavelength mode-locked thulium(Tm)-doped fiber laser operating in the dissipative soliton resonance(DSR) regime. The compact all-fiber dumbbell-shaped laser is simply constructed by a 50/50 fiber loop mirror(FLM), a 10/90 FLM, and a piece of large-gain Tm-doped double-clad fiber pumped by a 793 nm laser diode. The 10/90 FLM is not only used as an output mirror, but also acts as a periodical saturable absorber for initiating DSR mode locking. The stable DSR pulses are generated at the center wavelength as long as 2080.4 nm, and the pulse duration can be tunable from 780 to 3240 ps as the pump power is increased. The maximum average output power is 1.27 W, corresponding to a pulse energy of 290 nJ and a nearly constant peak power of 93 W. This is, to the best of our knowledge, the longest wavelength for DSR operation in a mode-locked fiber laser.     

利用啁啾光纤光栅色散特性实现波长可调谐的主动锁模掺铒光纤环行腔激光器

在环形腔主动锁模光纤激光器中引入啁啾光纤光栅，利用啁啾光纤光栅的大色散特性，通过调节调制频率，实现波长调谐，调谐范围2nm。所得脉冲为重复频率2．5GHz，脉宽约60ps的正啁啾脉冲，。     

Gigahertz Harmonic Mode-Locked Fiber Laser Based on Tunable SMS Ultrafast Optical Switch

A novel passively gigahertz harmonic mode-locked all-fiber laser based on hybrid fiber structure (single-mode fiber–graded-index multimode fiber–single-mode fiber (SMS)) is proposed SMS, which coils on the paddles of polarization controller (PC), is demonstrated to modulate the temporal intensity for mode-locking. The nonlinear absorption properties of the optical switch are controllable by adjusting the paddles of PC; such an ultrafast optical switch enables the wavelength switchable harmonic mode-locking operation. Ultrafast pulses with 1.9 ps at 1558.41 nm and 0.95 ps at 1563.08 nm are generated. The maximum repetition rate of the laser up to 1.127 GHz harmonic of fundamental repetition mode-locking at 1563.08 nm, corresponding to 880 order, and the output power is 4.2 mW. Considering its superiority in terms of low cost, easy integration, and high reliability, the findings validate that SMS can be used in harmonic mode-locking.     

Switchable dual-wavelength passively mode-locked fiber ring laser using SESAM and cascaded fiber Bragg gratings

We propose and demonstrate an efficient and simple wavelength switchable dual-wavelength passively mode-locked fiber ring laser based on a semiconductor saturable absorber mirror (SESAM) and a cascaded sequence of fiber Bragg gratings (FBGs). The efficient self-starting mode-locked operation was realized with a SESAM. Dual-wavelength pulses with a wavelength spacing of 12.49 nm were obtained which was determined by the reflection peaks of the FBGs used in the experiment. In addition, by rotating the polarization controllers (PCs), the switchable dual-wavelength operation was simply achieved via exploiting wavelength-dependent loss mechanism.     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Switchable dual-wavelength polarization-maintaining erbium-doped fiber laser using an optical circulator as the all-reflecting mirror

A simple and effective switchable dual-wavelength polarization-maintaining erbium-doped fiber laser is proposed and demonstrated. Only using a uniform fiber Bragg grating written directly in a segment of the photosensitive and polarization-maintaining erbium-doped fiber as the wavelength selector and an optical circulator as the all-reflecting mirror, a stable simultaneous dual-wavelength oscillation is achieved with a wavelength spacing of 0.364 nm experimentally by exploiting the polarization hole burning effect at room temperature. The output can be switched between single- and dual-wavelength by adjusting the polarization controller. The 3-dB bandwidth and the side mode suppression ratio of the laser’s outputs are measured to be less than 0.01 nm and more than 50 dB. The power fluctuation and wavelength drift are measured to be less than 0.50 dB and 0.020 nm over an hour.     

基于少数层石墨烯可饱和吸收的锁模光纤激光器

本文利用化学气相沉积法高温分解甲烷在铜箔上制得单层石墨烯薄膜, 测量了石墨烯的拉曼光谱. 将石墨烯薄膜逐层转移到光纤跳线的氧化锆插芯端面上做成可饱和吸收材料, 实验研究了环形腔掺铒光纤脉冲激光器的输出特性, 获得了峰值波长为1560.1 nm, 3 dB带宽为0.27 nm, 重复频率为7.69 MHz, 脉冲宽度为58.8 ps 的锁模脉冲序列. 时间带宽积为1.98, 表明脉冲出现了啁啾. 最后, 通过改变两个光纤活动接头之间的空气腔的长度, 激光波长实现了4 nm的调谐. 关键词： 光纤激光器 石墨烯 锁模     

输出平均功率大于2W的高功率、包层抽运、超短脉冲铒镱共掺光纤激光器

采用主振荡功率放大的方式，研制成功集宽带波长连续可调谐、带宽内输出功率谱均衡、高重复频率和高功率性能于一体的超短脉冲包层抽运铒镱共掺光纤激光器.将优化主振荡器和功率放大器的腔结构与掺铒光纤的饱和增益特性结合起来，实现了1535nm—1570nm(35nm带宽)的输出功率均衡的波长连续可调谐激光输出，在带宽内激光功率的最大波动仅为0.5dBm；带宽内平均输出功率大于2W、脉冲重复频率大于10GHz、脉冲宽度小于30ps.该激光器具有综合性能指标先进、结构简单、全光纤化、使用方便等优点. 关键词： 光纤激光器 包层抽运 短脉冲 高重复频率     

滤波对8字腔掺铒光纤激光器锁模运转的影响

构建了基于损耗非对称非线性光学环镜的8字腔掺铒光纤锁模激光器,并讨论了腔内滤波带宽对腔内脉冲演化和激光器输出特性的影响.在非线性光学环镜中引入双向输出耦合器,耦合器和传输光纤位置的不对称产生非互易性,实现锁模运转.利用自制的可调谐滤波器实验研究了滤波带宽对激光器的影响.当滤波带宽为2.1 nm时,腔内脉冲的演化过程受滤波和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲半高全宽分别为583.7fs和2.94 ps.随着滤波带宽增大,滤波的作用逐渐减弱,激光器两路输出脉冲参数逐渐接近,并接近傅里叶变换极限脉冲.当滤波带宽较大时,腔内脉冲的演化过程受增益谱和孤子效应的共同作用,激光器顺时针和逆时针输出脉冲均为变换极限脉冲,半高全宽约为440 fs.通过调节滤波器中心波长实现了对激光器输出脉冲光谱的连续调谐,调节范围大于30 nm.