聚硫醚纤维素吸附阳离子染料的动力学与热力学

脱脂棉在碱存在下与环硫氯丙烷发生醚化反应,合成了一种环境功能材料--聚硫醚纤维素（PTCC）。 考察了溶液酸度对吸附容量的影响并研究了PTCC对3种阳离子染料的吸附动力学与热力学。 研究结果表明,中性介质较有利于吸附的进行;298 K、pH=7.0时,静态吸附2 h后,吸附趋于平衡,PTCC对碱性艳蓝B、碱性艳蓝R和夜蓝的饱和吸附量分别为726、652和320 mg/g;PTCC对阳离子染料的吸附过程符合Lagergren二级吸附动力学方程,吸附速率常数k2随着温度的降低而升高,低温有利于吸附反应的进行;吸附过程ΔG、ΔH和ΔS均为负值,表明该吸附是自发的放热过程,主要是通过范德华力实现的。 吸附过程的吸附等温模型符合Langmuir等温式,可以用单分子层吸附理论加以解释。     

羧基化石墨烯对4种离子型染料的吸附脱色

合成的羧基化石墨烯（G-COOH）用FT-IR进行表征,并对G-COOH用于水溶液中甲基紫、中性红、灿烂黄和茜素红4种离子型染料的吸附性能进行了研究。 考察了吸附剂用量、吸附时间、初始浓度以及溶液pH值等条件对吸附效果的影响。 同时,研究了甲基紫染料的脱附性能,结果表明,用NaOH/EtOH混合溶液洗脱甲基紫,洗脱率可达88.2%,洗脱后的G-COOH可再利用。 从热力学角度探讨得出,G-COOH对阳离子染料甲基紫和中性红的吸附行为能够较好的符合Langmuir等温吸附模型,而对阴离子染料灿烂黄和茜素红的吸附行为则能够较好的符合Freundlich等温吸附模型,计算的吸附参数表明,G-COOH对4种染料的吸附过程容易进行。 动力学研究表明,G-COOH对4种离子型染料的吸附行为均能较好的符合准二级吸附模型。 该实验研究表明,在处理染料废水时,G-COOH为相当优异的吸附剂。     

氧化石墨及石墨烯对阳离子染料的吸附行为研究

利用改进的Hummers-Offeman法合成氧化石墨(GO)和石墨烯,并以其作为吸附剂,选择三种阳离子染料为模型染料,通过测定吸附前后三种阳离子染料溶液的紫外-可见吸收光谱,考察pH、染料初始浓度、温度对吸附效果的影响,研究GO及石墨烯对这三种阳离子染料的吸附行为。结果表明,GO及石墨烯对三种阳离子染料的吸附过程均符合准二级反应动力学方程,且染料结构和pH对其吸附效率也有影响。     

氧化石墨：制备及去除阳离子染料的性能

以石墨粉为原料按Hummers氧化法制备氧化石墨,借助X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、傅里叶变换红外光谱法(FTIR)和低温氮吸附-脱附对氧化石墨的结构和形貌进行了表征。结果表明,氧化石墨是不平整的、具有一定层状结构的褶皱片状,在其表面存在着许多含氧的官能团如:环氧基、羟基、羧基。此外还研究了氧化石墨对阳离子染料的吸附性能,结果表明:吸附过程的等温模型符合Langmuir等温式,对甲基紫、甲基绿、中性红这3种阳离子染料的最大饱和吸附量分别为:741,446和368 mg.g-1;对阳离子染料的吸附过程符合二级动力学方程。氧化石墨作为一种吸附剂能有效的去除阳离子染料与其较高的比表面积和与阳离子染料的静电吸引有关。     

镁铝类水滑石对阳离子染料中性红的吸附及机理研究

研究了镁铝类水滑石对中性红的吸附及其作用机理,考察了时间、pH、温度、电解质浓度等因素对吸附作用的影响。结果表明,镁铝类水滑石对中性红的吸附动力学符合准二级动力学方程,热力学符合Langmuir吸附等温式。在实验范围内,吸附量随溶液pH的增大而增加,随温度的升高而降低,随电解质浓度的增加先增加后降低。吸附过程是放热、熵减小的自发过程。镁铝类水滑石对中性红的吸附缘于为类水滑石与中性红分子中π电子的较强静电吸引作用。     

磁性碳纳米管对水中孔雀石绿的吸附性能研究

（1）以磁性碳纳米管吸附处理孔雀石绿溶液,考察了吸附剂用量、孔雀石绿浓度以及温度等对吸附平衡的影响。结果表明,该吸附不受溶液pH值的影响,符合准二级动力学方程（R2＞0.999）。不同温度下,该吸附过程满足Langmuir方程（R2>0.97）和Freundlich方程（R2>0.98）,qmax、KF随温度升高而变大。D-R等温方程拟合结果表明该吸附的机理是以化学吸附为主。热力学参数计算结果表明,该吸附是一个熵增的自发吸热过程,温度越高越利于吸附的进行。     

磁性碳纳米管对水中孔雀绿的吸附性能研究

以磁性碳纳米管吸附处理孔雀绿溶液,考察了吸附剂用量、孔雀绿浓度以及温度等对吸附平衡的影响。结果表明,该吸附不受溶液p H的影响,符合准二级动力学方程(R20.999)。不同温度下,该吸附过程满足Langmuir方程(R20.97)和Freundlich方程(R20.98),qmax、KF随温度升高而变大。D-R等温方程拟合结果表明该吸附的机理是以化学吸附为主。热力学参数计算结果表明,该吸附是一个熵增的自发吸热过程,温度越高越利于吸附的进行。     

新型阳离子凝胶吸附剂对活性橙的吸附研究

采用分步聚合的方法,以醛、酮、胺为原料通过溶液缩聚制备了新型阳离子凝胶吸附剂,通过吸附实验研究了阳离子凝胶对活性橙K-GN模拟染料废水的吸附效果并对其吸附行为和机理进行探讨。实验结果表明阳离子凝胶对活性橙的吸附以静电引力和基团间相互作用为主,热力学参数显示该吸附是一个自发、吸热和熵增过程,吸附行为可用准二级动力学方程描述,吸附等温线符合Langmuir和Freundlich等温吸附模型,30℃时凝胶对活性橙的饱和吸附量可达709 mg/g。     

均苯四甲酸酐改性花生壳粉吸附阳离子红染料的研究

以花生壳粉(PS)为生物基质,甲苯-2,4-二异氰酸酯(TDI)为交联剂,均苯四甲酸酐(PMDA)为改性剂,制备了均苯四甲酸酐改性花生壳粉(PMPS)吸附剂,并研究了PMPS对阳离子红染料吸附效果的影响因素。结果表明,在25℃,吸附时间3 h,pH值为2.0时,PMPS处理浓度为400.0 mg/mL的阳离子红溶液25 mL,最大吸附容量Q为177.2 mg/g,是未改性花生壳粉的2.2倍。改性花生壳粉吸附模式为Langmuir单分子层化学吸附。     

Ni-MOFs@GO复合材料吸附亚甲基蓝工艺优化及其性能研究

为了提高氧化石墨烯(GO)对阳离子染料的吸附效果,采用溶液共混法制备Ni-MOFs@GO复合材料。采用X射线衍射仪(XRD)、傅里叶红外光谱仪(FTIR)和扫描电子显微镜(SEM)对其结构和形貌进行了表征。采用响应曲面法(RSM)优化Ni-MOFs@GO对亚甲基蓝(MB)的吸附工艺。以Ni-MOFs@GO浓度、MB质量浓度和吸附温度3因素为变量,以MB吸附量为响应值,建立了二项式回归模型方程,确定最佳吸附条件,并进行动力学和热力学分析。结果表明：3因素的一次项和二次项对MB的吸附效果影响显著,交互项影响不明显。Ni-MOFs@GO对MB最佳吸附条件为Ni-MOFs@GO浓度为0.6 g·L^-1,MB质量浓度为30 mg·L^-1,吸附温度为26℃,MB吸附量为259.83 mg/g;吸附过程符合准二级动力学方程,吸附模型符合Freundlich等温线方程。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.