溶胶-凝胶非标记 CA15-3免疫传感器的研制与应用

采用溶胶-凝胶技术将乳腺癌抗体固定于电极表面,研制成用于检测乳腺癌抗原的非标记型溶胶-凝胶-抗体膜免疫传感器;用循环伏安法对电极的修饰过程进行表征,同时对乳腺癌抗原定量检测的可行性进行了探讨;随着抗体与抗原特异性反应的进行,形成的抗体-抗原免疫复合物使膜电位发生变化(△V),该变化的大小与溶胶-凝胶-抗体膜表面免疫反应进行的程度相关;本文以此为依据对CA15-3进行检测,在5～240U／mL范围内．△V／与lgCCA15-3呈良好的线性关系,线性相关系数r=O.998;该传感器响应迅速,灵敏度高,稳定性好,于4℃干态保存30d,其响应信号基本不变。     

溶胶-凝胶非标记免疫传感器检测乙肝表面抗原

采用溶胶 凝胶 (sol gel)技术包埋乙肝表面抗体 (HBsAb) ,涂布于金盘电极表面 ,构成sol gel HBsAb/Au非标记免疫传感器 ,用于检测人血清中乙肝表面抗原 (HBsAg)。该传感器对HBsAg的电位响应遵循Nernst方程 ,在 1～ 330 μg/L浓度范围内 ,传感器的电位响应值ΔE与HBsAg浓度C的对数呈线性关系 ,线性回归方程为ΔE =1 8.1 7+79.84lgC。响应时间为 3min。癌胚抗原、甲胎蛋白等对测定无明显影响。对于HBsAg阴性血清 ,电位响应值ΔE <30mV ,而对于阳性血清则ΔE >30mV ,据此 ,作为临床判别的依据。对1 0 0例临床血清分别用传感器和酶联免疫法 (ELISA)进行双盲检验 ,两法的符合率为 86 %。     

溶胶-凝胶固定葡萄糖氧化酶方法的改进

明胶;生物传感器;溶胶-凝胶固定葡萄糖氧化酶方法的改进     

基于功能化溶胶-凝胶膜的乳腺癌抗原免疫传感器

结合溶胶-凝胶(sol-gel)和交联技术,将乳腺癌抗体固定在铂盘电极表面的氨基化sol-gel功能膜上,制备出用于检测乳腺癌抗原(CA15-3)的免疫传感器.用红外光谱验证了该传感器功能膜的形成过程和组成结构,采用循环伏安法对传感器逐层修饰过程进行了表征,并对传感器功能膜的作用机理进行了探讨.该法检测CA15-3的线性范围为8～240U/mL,线性回归方程为ΔE=75.75lgc-56.36,r=0.998.结果表明,该方法很好地保持了被固定抗体的活性,增强了传感器的稳定性,所制备的传感器于4℃干态保存30d,其响应信号基本不变.且该传感器响应迅速、灵敏度高、选择性好,血清中常见抗原不干扰测定.     

基于Nafion-L-赖氨酸-溶胶-凝胶膜的电催化型多巴胺传感器

基于Nafion-L-赖氨酸-溶胶-凝胶膜的电催化型多巴胺传感器     

溶胶-凝胶生物传感器

评述了溶胶－凝胶生物传感器这个领域已取得的成果,主要内容涉及溶胶－凝胶固定化方法的过程,优点与性质,溶胶－凝胶光学生物传感器和安培生物传感器的发展,并展望了其发展趋势。     

自组装碳纳米管-氯洁霉素分子印迹溶胶-凝胶电化学传感器研究

结合自组装技术, 采用电聚合方法在碳纳米管修饰金电极表面制备对氯洁霉素具有特异性识别位点的分子印迹溶胶-凝胶薄膜, 成功构建了一种新型印迹溶胶-凝胶电化学传感器. 通过循环伏安法(CV)、示差脉冲法(DPV)、安培计时法(I-t)和扫描电镜(SEM)表征了该印迹溶胶-凝胶膜的电化学性能和表面形貌. 结果表明, 该传感器具有良好的选择性和灵敏度, 氯洁霉素在多壁碳纳米管修饰的印迹溶胶-凝胶传感器上的响应明显提高. 该印迹溶胶-凝胶传感器对氯洁霉素的浓度响应线性范围为5.0×10^-7~8.0×10^-5 mol/L, 检出限为2.44×10^-8 mol/L. 该传感器被成功地用于人体尿液中氯洁霉素的分析测定.     

基于ZnO溶胶-凝胶固定的酪氨酸酶传感器的研制

通过使用带正电荷的ZnO溶胶-凝胶在玻碳电极表面固定酶,研制了一种简单有效的酪氨酸酶传感器。结果表明,ZnO溶胶-凝胶的等电点为酪氨酸酶的固定提供了有利的微环境,酪氨酸酶能很好地保持其生物活性。所研制的传感器达到95%稳定状态电流的时间在10 s以内。酚类化合物可通过酶催化产生的醌在-200 mV(对饱和甘汞电极)直接还原而测定,传感器对苯酚测定的灵敏度为168μA.mmol-1.L-1,线性范围为1.5×10-7~4.0×10-5mol.L-1,检出限为8.0×10-8mol.L-1。该传感器使用二周后活性仍保持原有活性的75%。     

溶胶-凝胶-HBsAb膜免疫传感器的研制与应用

采用溶胶-凝胶(Sol-gel)技术,成功地将乙肝表面抗体(HBsAb)包埋于Sol-gel中,再滴涂于铂盘电极表面,制成溶胶-凝胶-HBsAb膜非标记免疫传感器.根据抗原与抗体特异性结合形成的免疫复合物使敏感膜有效扩散截面积减小的特性,提出了利用铁氰化钾作为氧化还原探针间接检测乙肝表面抗原(HBsAg)的新方法.用循环伏安法(CV)对电极逐层修饰过程进行了表征,并探讨了对HBsAg定量检测的可行性及其响应机理.采用差示脉冲伏安法(DPV)检测人体血清中的HBsAg.线性范围5～320μg/L,线性相关系数r=0.997.该传感器响应迅速,灵敏度高,稳定性好.于4℃干态保存14d,其响应信号基本不变.将其用于108例临床血清检验,与酶联免疫吸附法(ELISA)的符合率为87.5％.     

溶胶-凝胶技术在电化学和生物传感器制备中的应用近况

对溶胶-凝胶技术在制备电化学和生物传感器中的应用近况(涉及年份主要在1992-2006年间)作了评述,内容主要集中在应用此技术包埋某些电化学活性物质或生物化学活性分子于其中而制备相关传感器的方法及其原理,在制备传感器过程中的影响因素以及此类传感器的分析应用。此外,对其发展趋势也作了简单的讨论(引用参考文献51篇)。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.