Spatially shifted beam approach to subwavelength focusing

Although negative-refractive-index metamaterials have successfully achieved subwavelength focusing, image resolution is limited by the presence of losses. In this Letter, a metal transmission screen with subwavelength spaced slots is proposed that focuses the near-field beyond the diffraction limit and, furthermore, is easily scaled from microwave frequencies to the optical regime. An analytical model based on the superposition of shifted-beam patterns is developed that agrees very well with full-wave simulations and is corroborated by experimental results at microwave frequencies.     

Stimulated emission depletion microscopy with a supercontinuum source and fluorescence lifetime imaging

We demonstrate stimulated emission depletion (STED) microscopy implemented in a laser scanning confocal microscope using excitation light derived from supercontinuum generation in a microstructured optical fiber. Images with resolution improvement beyond the far-field diffraction limit in both the lateral and axial directions were acquired by scanning overlapped excitation and depletion beams in two dimensions using the flying spot scanner of a commercially available laser scanning confocal microscope. The spatial properties of the depletion beam were controlled holographically using a programmable spatial light modulator, which can rapidly change between different STED imaging modes and also compensate for aberrations in the optical path. STED fluorescence lifetime imaging microscopy is demonstrated through the use of time-correlated single photon counting.     

Nano‐imaging through tip‐enhanced Raman spectroscopy: Stepping beyond the classical limits

The spatial resolution in optical imaging is restricted by so‐called diffraction limit, which prevents it to be better than about half of the wavelength of the probing light. Tip‐enhanced Raman spectroscopy (TERS), which is based on the SPP‐induced plasmonic enhancement and confinement of light near a metallic nanostructure, can however, overcome this barrier and produce optical images far beyond the diffraction limit. Here in this article, the basic phenomenon involved in TERS is reviewed, and the high spatial resolution achieved in optical imaging through this technique is discussed. Further, it is shown that when TERS is combined with some other physical phenomena, the spatial resolution can be dramatically improved. Particularly, by including tip‐applied extremely localized pressure in TERS process, it has been demonstrated that a spatial resolution as high as 4 nm could be achieved.     

光学相干层析成像轴向超分辨研究

为了提高光学相干层析成像(OCT)的轴向分辨率,采用OCT与光学超分辨术相结合的方法,设计了三区相位型和振幅型两种光瞳滤波器,并将制作的光瞳滤波器应用于系统的样品臂中,分别测量不同条件下对应的轴向响应曲线,结果与理论分析基本吻合,实现了轴向分辨率10％以上的提高,从而验证了利用合适光瞳滤波器实现OCT轴向超分辨的可行性.     

Structured interference optical coherence tomography

We developed a structured interference optical coherence tomography (SIOCT) to enhance the lateral resolution beyond the diffraction limit. A sinusoidal pattern is created on the interferometric beam with the reference intensity temporally modulated. In the Fourier domain, the high spatial frequencies are shifted into the detectable range, which enhances the lateral resolution beyond the diffraction limit by a factor of 2. The lateral resolution of SIOCT was characterized in our study as ～5.5 μm, surpassing the diffraction limit ～9.6 μm as in conventional Fourier-domain optical coherence tomography. SIOCT was demonstrated on phantoms and ex vivo adipose tissues.     

用于频域光学相干层析成像的深度分辨色散补偿方法

提出一种深度分辨的色散补偿方法,用于增强频域光学相干层析成像的纵向分辨率。将频域光学相干层析成像采集的干涉谱信号傅里叶变换到空域,获取对应不同深度的干涉谱条纹相位,通过对其进行调整实现对被测样品不同深度处的色散的精确补偿。避免传统方法中采用统一色散系数进行色散补偿所带来的过补偿与欠补偿误差,可以有效消除色散引起的频域光学相干层析成像系统点扩展函数的展宽和扭曲。模拟和实验结果表明,基于深度分辨的色散补偿方法在样品的全深度探测范围内可以达到较佳的补偿效果,可有效提高光学相干层析成像系统的纵向分辨率。     

双光栅快速扫描光学延迟线的色散补偿

光学相干层析成像(OCT)系统的纵向分辨力不仅与光源的带宽有关,而且与系统中两干涉臂间的色散匹配有关。如果色散没有得到精确匹配,将使光学相干层析成像系统的纵向分辨力达不到所预期的理论值。色散问题在超高分辨光学相干层析成像系统中尤为突出。提出了一种基于双光栅快速扫描光学延迟线(RSOD),用于光学相干层析成像系统的色散补偿。该方法中新增的光栅引入了光栅间距这一独立变量,其与常规单光栅快速扫描光学延迟线机构中的光栅离焦量一起,可使光学相干层析成像系统中的群速度色散(GVD)和三阶色散(TOD)同时得到补偿。分析了双光栅快速扫描光学延迟线的色散特性和色散调节原则,并提供了一个典型光学相干层析成像系统中的色散补偿实例。     

Apodization‐Assisted Subdiffraction Near‐Field Localization in 2D Phase Diffraction Grating

Conventional phase diffraction gratings can be used to localize the incoming optical radiation in the near‐field region. A new design of the binary phase diffraction grating is proposed with embedded pupil opaque mask inside each stripe. By means of numerical simulations, it is shown that with this masked phase grating the spatial resolution of the near‐field localization can be substantially improved and brought even beyond the solid immersion limit (λ/2n). Moreover, due to anomalous apodization effect, the subdiffraction field localization is accompanied by intensity enhancement as compared to the non‐masked design. The pupil mask rearranges the optical fluxes within the stripes and promotes the Fano resonances excitation in the periodic step lattice. This can be important for advancing the phase grating‐based super‐resolution technologies, including subdiffraction imaging, interferometry, and surface fabrication.     

Ultrahigh light transmission through a C-shaped nanoaperture

Optical resolution beyond the diffraction limit can be achieved by use of a metallic nanoaperture in a near-field optical system. Conventional nanoapertures have very low power throughput. Using a numerical finite-difference time domain method, we discovered a unique C-shaped aperture that provides approximately 3 orders of magnitude more power throughput than a conventional square aperture with a similar near-field spot size of approximately 0.1 lambda. Microwave experiments at 6 GHz quantitatively confirmed the simulated transmission enhancement. The high transmission of the C-aperture--or one of the related shapes--is linked to both a propagation mode in the aperture and local surface plasmons.     

Fourier变换光谱学退卷积技术的理论研究

介绍了Fourier变换光谱退卷积技术的原理,通过数学推导从理论上对退卷积光谱的特性进行了分析,分别讨论了退卷积技术的两个重要参量,即退卷积系数和切趾长度,对复原光谱的线宽和信噪比的影响,从而得到三个结论:1) 退卷积技术的分辨率增强能力在实际中由于受到噪音的限制而不能无限提高.2) 对于光谱中宽度不同的谱线,退卷积将导致它们之间的峰高比失真.3) 在选定退卷积系数和切趾长度以满足谱线形状和宽度的要求后,只有通过选择合适的切趾函数来满足信噪比的要求.研究还发现,退卷积过程相当于一个带通滤波器,其中高通滤波器是退卷积函数,低通滤波器是切趾函数,它们共同决定着退卷积技术的滤波特性.     

Cell refractive index tomography by digital holographic microscopy

For what we believe to be the first time, digital holographic microscopy is applied to perform optical diffraction tomography of a pollen grain. Transmission phase images with nanometric axial accuracy are numerically reconstructed from holograms acquired for different orientations of the rotating sample; then the three-dimensional refractive index spatial distribution is computed by inverse radon transform. A precision of 0.01 for the refractive index estimation and a spatial resolution in the micrometer range are demonstrated.     

激光超衍射加工机理与研究进展

随着纳米科技和微纳电子器件的发展,制造业对微纳加工技术的要求越来越高.激光加工技术是一种绿色先进制造技术,具有巨大的发展潜力,己广泛应用于不同的制造领域.为实现低成本、高效率、大面积尤其是高精度的激光微纳加工制造,研究和发展激光超衍射加工技术具有十分重要的科学意义和应用价值.本文首先阐述了基于非线性效应的远场激光直写超衍射加工技术的原理与国内外发展状况,包括激光烧蚀加工技术、激光诱导改性加工技术和多光子光聚合加工技术等;然后介绍了几种基于倏逝波的近场激光超衍射加工技术,包括扫描近场光刻技术、表面等离子激元光刻技术等新型超衍射激光近场光刻技术的机理与研究进展;最后对激光超衍射加工中存在的问题及未来发展方向进行了讨论.     

Improving spatial resolution in quantum imaging beyond the Rayleigh diffraction limit using multiphoton W entangled states

Using multiphoton entangled states, we demonstrate improving spatial imaging resolution beyond the Rayleigh diffraction limit in the quantum imaging process. In particular, we examine resolution enhancement using triphoton W state and a factor of 2 is achievable as with the use of the Greenberger-Horne-Zeilinger state, compared to using a classical-light source.     

光学弱相干反射测量系统频谱分析

本文在弱物体近似下从成象系统角度研究了光学弱相干反射测量术,分析了该技术测量时信号的形成机理.结果表明它相当于一线性平移不变系统,具有高通滤波特性,直接测量的是缺陷分布的高频信息.本文的工作为定量分析测量结果及进一步提高空间分辨率提供了理论依据.     

Demonstration of dispersion-canceled quantum-optical coherence tomography

We present an experimental demonstration of quantum-optical coherence tomography. The technique makes use of an entangled twin-photon light source to carry out axial optical sectioning. It is compared to conventional optical coherence tomography. The immunity of the quantum version to dispersion, as well as a factor of 2 enhancement in resolution, is experimentally demonstrated.     

用于飞秒激光纳米加工的TiO_2粒子阵列诱导多种基底表面近场增强

利用纳米粒子辅助对飞秒激光能量进行空间局域化,使其在基底表面诱导产生纳米尺度的近场增强,这对超衍射极限微结构加工具有重要意义.目前对于粒子阵列诱导飞秒激光纳米孔加工的研究仅限于金属Au粒子及低折射率聚苯乙烯介电粒子等,本文提出并开展了应用高折射率TiO_2介电粒子阵列作为辅助诱导激光近场增强从而进行飞秒激光超衍射纳米孔加工的研究.对TiO_2介电粒子阵列在Si,Pt及SiO_2表面的近场强度分布进行了数值模拟,研究其基底表面近场增强的规律及物理过程.研究结果发现,使用硅基底时,阵列与单一TiO_2球形粒子相比其近场增强仅下降约30%;相对于入射激光强度而言,在直径约为100nm的空间范围内获得140倍的近场增强,这一现象可用于百纳米孔的激光加工.同时在其他典型基底的理论计算结果中也表明,几乎在所有金属及介电材料表面均可以实现良好的百纳米空间范围内的近场增强,并且具有近场随着基底折射率变大而增强的规律.这些现象的产生归因于TiO_2粒子中磁四极振荡产生的激光前向场增强及粒子与基底的耦合作用.进一步引入镜像电荷模型对基底光学参数对其表面近场增强的影响规律进行了分析和解释.本文的模拟结果对飞秒激光近场超衍射极限纳米加工的应用有着重要的意义.     

Microstructure measurement based on frequency-shift feedback in a-cut Nd:YVO_4 laser

A new optical method based on frequency-shift feedback and laser confocal microscopy is presented to noninvasively measure a microstructure inside a sample. Due to the limit of axial resolution caused by poor signal detection ability, conventional laser feedback cannot precisely measure the microstructure. In this Letter, the light scattered by the sample is frequency shifted before feedback to the laser to obtain a magnification. Weak signals that change with the microstructure can be detected. Together with the tomography ability of laser confocal microscopy, the inner microstructure can be measured with high axial resolution.     

Study of an ultrahigh-numerical-aperture fiber continuum generation source for optical coherence tomography

The axial resolution of optical coherence tomography images is primarily dependent on the bandwidth of the illumination source. Continuum generation is one way to generate the single-mode, high-bandwidth light needed for point illumination. We present an inexpensive and easy-to-implement augmentation to a Ti:sapphire laser that widens the bandwidth from 20 to over 200 nm with commerically available ultrahigh-numerical-aperture fiber. This technique can provide a readily available broad-bandwidth source for researchers and a practical enhancement to a fiber-optic optical coherence tomography system.     

Axial coding in full-field microscopy using three-dimensional structured illumination implemented with no moving parts

We report a simple optical setup to produce both axial and lateral structured illumination through a single objective lens. With a minimum of six full-field images obtained without moving either the sample or the microscope objective, 100 nm diameter fluorescent beads can be localized axially with an accuracy of 50 nm in a 1.76-microm-thick layer. We show that this axial localization improvement can easily be combined with classical lateral structured illumination, so that lateral resolution enhancement by a factor of 2 is maintained.     

超分辨近场结构的研究进展及其应用

超分辨近场结构(super-resolution near-field structure,super-RENS)由于突破了传统远场光学衍射极限的限制,在纳米光储存、微纳米加工、基于局域表面等离子体增强的生物传感器方面展现出良好的应用前景,因此吸引了众多研究者的目光.文章简要介绍了超分辨近场结构的发展历程、相应的工作机理、最新研究动态及其在超高密度光存储、近场光刻中的应用状况,并对未来的工作重点做出展望.