Application of sequential extraction and the ICP-AES method for study of the partitioning of metals in fly ashes

In this work, the original BCR extraction scheme was modified and applied to study the partitioning of metals in fly ashes. In the first step, the water-soluble fraction was investigated here. The next metal fractions were acid-soluble, reducible, and oxidisable. Two kinds of coal fly ash certified reference materials were analysed. Metal concentrations in the extracts were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES). The efficiency of the extraction process for each step was examined. The partitioning of metals between the individual fractions was investigated and is discussed.     

电感耦合等离子体质谱法测定黄沙土壤中铅同位素比

用电感耦合等离子体质谱法（ＩＣＰ—ＭＳ）测定了５个黄沙原土样品中铅同位素比２０７Ｐｂ／２０６Ｐｂ、２０８Ｐｂ／２０６Ｐｂ，样品来自被认为是黄沙气溶胶源地区，为了使铅同位素测量中质量偏差和漂移减至最少，在样品中加入了铊标准溶液，测量２０５Ｔｌ／２０３Ｔｌ比，校正质量数差别选择的影响．同时，采用ＩＣＰ—ＭＳ和电感耦合等离子体原子发射光谱法（ＩＣＰ一ＡｌＳ）测定了随粒径变化样品中１２种元素浓度的变化．     

Determination of Titanium in Nano-Titanium(IV) Oxide Composite Food Packaging by Microwave Digestion and Inductively Coupled Plasma Atomic Emission Spectrometry and Inductively Coupled Plasma Mass Spectrometry

Titanium was determined in nano-titanium(IV) oxide food packaging by microwave digestion with inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). Microwave digestion was optimized using different acid combinations. Both spectrometry techniques showed good reproducibility, repeatability, and recovery. For ICP-AES, the limit of detection was 5.0 mg kg^?1, the linear dynamic range was 100–5000 µ g L^?1, the average recoveries for blank samples spiked with titanium were between 94.7% and 100.1%, and the relative standard deviations were from 2.1% to 7.1%. By ICP-MS, the limit of detection was 0.3 mg kg^?1, the linear dynamic range was 0.5–200 µ g L^?1, the recoveries were 88.4%–96.3%, and the relative standard deviations were 6.3%–7.4%. These results indicated that methods were effective for the determination of titanium in food packaging.     

有机试液的电感耦合等离子体原子发射光谱分析 Ⅰ.实际应用的若干方面

本文从七个方面介绍了ICP-AES在有机试液直接分析中的应用:(1) 油类样品分析;(2) 酒样直接分析;(3) 溶剂萃取分离富集-ICP光谱分析;(4) 基于生成挥发性金属有机化合物的ICP进样方法;(5) 有机试液分析中的其它进样方法;(6) 有机介质中非金属元素的ICP-AES测定;(7) ICP-AES作为色谱法的检测器。     

Analytical performance of a multi-element ICP-AES method for Cd, Co, Cr, Cu, Mn, Ni and Pb determination in blood fraction samples

An analytical method using inductively coupled plasma atomic emission spectrometry (ICP-AES) for rapid simultaneous determination of seven heavy metals (Cd, Co, Cr, Cu, Mn, Ni and Pb) in human blood fractions, like plasma, cells fraction and whole blood, is performed. The optimum wavelength was selected using as criterions the sensitivity, the linearity and recovery of aqueous standard solutions. The pretreatment of the sample, the centrifugal conditions, the necessity of digestion and the dilution of the digests were also studied. For plasma it was possible to avoid digestion of the sample, but for cells fractions and whole blood the digestion is necessary. The samples were acid-digested by HNO₃ in closed Teflon tubes under high temperature and pressure conditions and were diluted before injection into ICP-AES. Also, optimization of the inductively coupled plasma conditions like nebulizer argon flow rate, sample flow rate and power of radio frequency was performed for each analyte. Finally, the effect of the type of the employed calibration technique on the total variation of the method was examined. Calibration using the standard addition technique was proved more accurate for the determination in terms of analyte recovery. The sensitivity and recovery (Cd 99%, Co 101%, Cr 100%, Cu 99%, Mn 101%, Ni 100% and Pb 97%) of the developed method are presented for all examined blood fractions. Correspondence: George A. Zachariadis, Laboratory of Analytical Chemistry, Department of Chemistry, Aristotle University, Thessaloniki 54124, Greece     

Determination of cadmium in polyethylene by analytical atomic spectrometry with gas-phase sample introduction technique

Cadmium in polyethylene was determined by both inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption spectrometry (AAS) with continuous-flow gas-phase sample introduction in a reaction medium of ascorbic acid. In the presence of mixture of cobalt and thiourea in the ascorbic acid solution, the sensitivities by both ICP-AES and AAS for cadmium were greatly enhanced. The gaseous cadmium species was phase-separated in a gas–liquid separator and directed via a stream of argon carrier gas to an inductively coupled plasma and an electrically heated quartz tube atomizer (QTA) for atomic spectrometry. Under the optimized experimental conditions, the best attainable detection limits at Cd I 228.802 nm line were 1.3 and 0.017 ng/ml with linear dynamic ranges of 10–500 ng/ml and 0.1–1 ng/ml in concentrations by ICP-AES and QTA-AAS, respectively. The instrumental precisions expressed as the relative standard deviation (R.S.D.) from ten replicate measurements of 50 and 1 ng/ml cadmium by ICP-AES and QTA-AAS were 5.6% and 3.2%, respectively. With the use of ICP-AES and QTA-AAS with gas-phase sample introduction method, six- and 200-fold improvements in detection limits for cadmium were obtained in comparison with their conventional solution nebulization methods, respectively. After the effects of several diverse elements on the determination of cadmium by ICP-AES and QTA-AAS with the present gas-phase sample introduction systems were examined, these methods were applied to the determination of low concentrations of cadmium in polyethylene. The results obtained by the present method were in good agreement with the certified values.     

Direct analysis of fly ash materials by inductively coupled plasma atomic emission spectrometry using slurry nebulization

Fly ash samples of cement works were analysed using slurry nebulization inductively coupled plasma atomic emission spectrometric (ICP-AES). Because of the influence of the experimental factors on the signal intensity, the optimal conditions of the analysis circumstances were determined. Control analyses (wet digestion followed by ICP-AES, and XRF of dry powders (pressed pellets)) were also carried out to compare the results. Based on the result, it was concluded that the slurry nebulization method using slurry standard of same type reference material for calibration can be applied for rapid but less precise (RSD 5–10%) determination of the elements in fly ash.     

电感耦合等离子体质谱激光烧蚀固体进样技术新进展

本文简单地介绍了电感耦合等离子体质谱(LA-ICP-MS)的基本原理及装置。分别对LA-ICP-MS在飞秒激光器、紫外激光器、固液气溶胶混合进样、集合式小样品标样、原位统计分布技术上的技术新进展进行了详细的评述。     

A pilot study on the feasibility of the preparation of a new certified reference material based on the Antarctic Scallop Adamussium Colbecki

As foreseen by the Italian National Programme of Research in Antarctica, a preliminary investigation was performed to ascertain the feasibility of the production of a new Certified Reference Material for trace elements based on the bivalve Adamussium colbecki. The scallops sampled in Antarctica during the 1999–2000 Italian scientific expedition were analyzed by inductively coupled plasma atomic emission spectrometry and high-resolution inductively coupled plasma mass spectrometry for their content in selected trace elements (As, Cd, Cr, Cu, Fe, Hg, Mn, Mo, Ni, V and Zn). The certification campaign will be undertaken on the basis of the findings of this feasibility study in close cooperation with the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission.     

Isolation and analysis of trace level of silicone oil in pharmaceutical bulk drug substance by ICP-AES

In order to evaluate the extent of silicone oil contamination in a drug substance derived from processing equipment, a novel extraction method was developed which uses a mixture of polar and non-polar solvents (toluene/acetonitrile). Unlike the majority of silicone oil extraction methods in the literature that yield very low recoveries, this procedure proved able to completely recover the silicone oil from this compound. The recovered silicone oil was rediluted in isopropanol alcohol (IPA)/toluene mixture and subsequently analyzed by an inductively coupled plasma atomic emission spectrometer (ICP-AES) coupled to an ultrasonic nebulizer (USN).     

碱熔-ICP-AES测定电镀废弃物中的镍

采用过氧化钠分解试样,盐酸浸取,通过仪器参数的优化、共存元素干扰等实验,建立了电感耦合等离子体原子发射光谱法测定电镀废弃物中镍含量的方法。方法的测定范围ω(Ni)1.00%~10.00%。经加标回收实验,镍元素的加标回收率为99.0%~107%(n=3),方法准确可靠,完全能够满足此类物料中镍含量的检验工作。     

Alcohol and metal determination in alcoholic beverages through high-temperature liquid-chromatography coupled to an inductively coupled plasma atomic emission spectrometer

In the present work, an inductively coupled plasma atomic emission spectrometry (ICP-AES) system was used as a high temperature liquid chromatography (HTLC) detector for the determination of alcohols and metals in beverages. For the sake of comparison, a refractive index (RI) detector was also employed for the first time to detect alcohols with HTLC. The organic compounds studied were methanol, ethanol, propan-1-ol and butan-1-ol (in the 10-125 mg/L concentration range) and the elements tested were magnesium, aluminum, copper, manganese and barium at concentrations included between roughly 0.01 and 80 mg/L. Column heating temperatures ranged from 80 to 175 °C and the optimum ones in terms of peak resolution, sensitivity and column lifetime were 125 and 100 °C for the HTLC-RI and HTLC-ICP-AES couplings, respectively. The HTLC-ICP-AES interface design (i.e., spray chamber design and nebulizer type used) was studied and it was found that a single pass spray chamber provided about 2 times higher sensitivities than a cyclonic conventional design. Comparatively speaking, limits of detection for alcohols were of the same order for the two evaluated detection systems (from 5 to 25 mg/L). In contrast, unlike RI, ICP-AES provided information about the content of both organic and inorganic species. Furthermore, temperature programming was applied to shorten the analysis time and it was verified that ICP-AES was less sensitive to temperature changes and modifications in the analyte chemical nature than the RI detector. Both detectors were successfully applied to the determination of short chain alcohols in several beverages such as muscatel, pacharan, punch, vermouth and two different brands of whiskeys (from 10 to 40 g of ethanol/100 g of sample). The results of the inorganic elements studied by HTLC-ICP-AES were compared with those obtained using inductively coupled plasma mass spectrometry (ICP-MS) obtaining good agreement between them. Recoveries found for spiked samples were close to 100% for both, inorganic elements (with both HLTC-ICP-AES and ICP-MS) and alcohols (with both HTLC-ICP-AES and HTLC-RI hyphenations).     

电感耦合等离子体原子发射光谱分析信息系统的开发 Ⅰ.系统分析

根据电感耦合等离子体原子发射光谱（ＩＣＰ－ＡＥＳ）分析的实际需要，开发了一种 ＩＣＰ－ＡＥＳ分析信息系统。该系统包括谱线管理系统、识别干扰程度系统、校准及干扰校正系 统、帮助系统等子系统。本文将讨论系统分析。系统设计和系统评价将在另文中讨论。     

Determination of cadmium, lead, iron, nickel and chromium in selected food matrices by plasma spectrometric techniques

In the frame of a study aimed at investigating the transfer of metal contaminants through the food chain and the effects of food processing, five elements, namely Cd, Pb, Fe, Ni and Cr, were accurately determined in (i) durum wheat grain and derived products, (ii) wheat-based reference materials, (iii) drinking water, used both as an ingredient and for technological purposes in the investigated industrial process. Microwave closed vessel digestion was selected as the dissolution technique for solid samples, whereas water samples were acidified with ultrapure nitric acid and analysed directly. As several analytes had to be quantified at trace or ultratrace levels, inductively coupled plasma mass spectrometry (ICP-MS) was resorted to for analytical determinations. Overall, this straightforward analytical approach enabled to detect the often small changes in element concentration associated with the different technological steps of processing. Nevertheless, detection of heavily interfered elements, especially Cr, as well as analyte quantification at ultratrace-level level in water, posed analytical challenges that required suited analytical solutions.Changes in the sample introduction system and complementary use of inductively coupled plasma atomic emission spectrometry (ICP-AES) straightforwardly overcame the difficulties in determining the analytes in the selected food matrixes. The benefits of ultrasonic nebulization in reducing the effects of problematic spectral interferences were demonstrated. Overall, a robust and high-throughput analytical method was outlined.     

Determination of Heavy Metals in Soils, Sediments and Geological Materials by ICP-AES and ICP-MS

 Sixteen soil and sedimentary geological reference materials were analysed for As and the heavy metals Cd, Co, Cr, Cu, Ni, Pb and Zn by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and inductively coupled plasma-mass spectrometry (ICP-MS) in combination with total and partial dissolution of the samples. It can be demonstrated that none of the modern ICP methods is completely free from analytical problems. This applies in particular when the concentrations are close to the detection limits (e.g. in ICP-AES) and is mainly due to the wide variation in the bulk composition of soils resulting in complex matrix effects (e.g. in ICP-MS). In order to determine the extent of soil pollution by heavy metals, both partial and total dissolution have to be performed prior to analysis.     

Inductively coupled plasma optical emission spectrometric determination of trace element in PM10 airborne particulate matter collected in an industrial area of Argentina

Trace metals of relevance from the environmental and toxicological point of view were quantified in the city of Campana, Buenos Aires, Argentina. The collection of particulate matter was performed on ash-free fiber glass filters using high-volume samplers with a PM₁₀ sampling head, during a 3-month period in 2002. An acid leaching of elements deposited on the filters was adopted paying special attention to the recovery of volatile elements. Analysis was performed by inductively coupled plasma optical emission spectrometry (ICP OES) to ascertain the concentrations of 12 key elements, namely, Al, As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn. The validation of the procedure was performed by the analysis of the standard reference material NIST 1648, urban particulate matter, and good agreement between concentrations found and the reported certified values was achieved. Blank filters were spiked with the analytes investigated and the recoveries varied between 83% and 92%. Metal concentrations spanned the range 0.03 ng m⁻³ (equivalent to 0.42 μg g⁻¹) for Cd to 1.9 μg m⁻³ (equivalent to 29.7 mg g⁻¹) for Fe. The results obtained show that the pollutants of special environmental and health concern are As and Pb. Mean As concentration was higher than the guideline value associated with an excess cancer risk of 1:10⁻⁶, reported by the World Health Organization (WHO). Lead is the only element that showed higher concentrations than those recently measured in the large and heavily trafficked metropolitan area of Buenos Aires. Cadmium>Pb>As>Zn>Cu are the elements more enriched in airborne PM₁₀.     

Iron, manganese, copper and titanium in welding fume dust on filters for internal and external quality assurance

Summary Filters charged with welding fume dust were developed and produced for internal and external quality assurance to evaluate and improve the performance of analytical methods used for monitoring iron, manganese, copper and titanium in the working environment. The filters were simultaneously loaded, using a Sputnic air sampling unit containing 100 cellulose nitrate filters. The welding fume dust was collected in industrial working conditions where Metal Inert Gas welding in construction steel was being carried out. The metal concentrations on the filters were close to the metal concentrations from environmental and industrial exposure. The homogeneity of the filter materials was evaluated to document the suitability of the air sampler in producing quality control materials. The filters were homogeneous within 5.0–12.7% according to amount of metal. The welding fume dust loaded on the filters was (0.2021±0.0093 mg/filter) and the amounts of metals loaded on the filters were (34.6±6.4 g/filter, 16.0±0.8 g/filter, 2.4±0.1 g/filter) for iron, manganese and titanium, respectively. Normalizing the amount of metal according to the welding fume dust improved the homogeneity. The most satisfactory results were obtained for manganese and titanium, for which within batch variation was below 6.3%. The Sputnic air sampler was shown to be suitable in preparing quality control materials, although a few improvements are needed for future experiments, such as the method of charging the dust and rules for outlier exclusion.     

一种新型毛细管电泳—电感耦合等离子体光谱法接口装置

毛细管电泳是一种高效、简便的分离方法，已被用于生物、环境及临床等试样的分离及分析[1]．检测技术在毛细管电泳中占有重要的地位，目前，在柱紫外可见及荧光检测是两种广为接受的检测方法，但其检测灵敏度仅为10－5～10－6mol／L[2]．电感耦合等离子体光谱（ICP－AES／MS）是一种灵敏的元素选择性的分析方法，已被广泛地用于各种试样中元素分析．近年来，该方法作为色谱及毛细管电泳的检测器，被用于元素的形态分析[3]．在毛细管电泳（CE）与ICP光谱连用技术中，挑战性的工作是设计一种能把CE与ICP相连的接口．目前已有几种接口…     

Determination of Arsenic,Cadmium, Cobalt,Chromium, Nickel,and Lead in Cosmetic Face-Powders: Optimization of Extraction and Validation

An analytical method for the quantification of toxic metals in face-powders is presented and discussed. Acid digestion with HNO₃-H₂O₂ or HNO₃-HCl was performed and compared with total digestion by HF. The digestion with HNO₃-H₂O₂ was the most suitable for these purposes. Analyses were performed by inductively coupled plasma atomic emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS), whose performances were compared by analyzing three different certified reference materials. The analysis of five commercial face-powders revealed the presence of all the considered metals in the range 0.06–8.0 µg/g. To simulate the bioaccessibility of metals in physiological conditions, a digestion with a simulated sweat solution was performed. In this case, the analysis of the same face-powder samples provided results below the limit of quantification, suggesting low bioaccessibility of the considered trace elements.     

Synthesis and efficiency of an epoxy-tannin chelating resin for preconcentrating and separating various rare elements

A new epoxy-tannin chelating resin was synthesized from epoxy resin and used for the preconcentration and separation of rare elements. The acidity, rate, reuse, capacity and interference on the adsorption of ions on the resin as well as the conditions of desorption of these ions from the resin were investigated by means of inductively coupled plasma atomic emission spectrometry (ICP-AES). The composition of the resin and mechanism of enrichment for some ions were discussed. The results show that the relative standard deviations for the determination of 50 ng ml⁻¹ Ga(III), In(III), Bi(III) and Sn(IV), 10 ng ml⁻¹ La(III), Y(III), Cr(III), Ti(IV) and V(V) and 1.0 ng ml⁻¹ Be(II) were in the range of 0.5–4.5%. The contents of these elements in a sample solution from a smelter determined by the new method were in agreement with those values obtained by Zeeman atomic absorption spectrometry with an average error <3.4%.