One-pot preparation of silica-supported hybrid immobilized metal affinity adsorbent with macroporous surface based on surface imprinting coating technique combined with polysaccharide incorporated sol--gel process

A simple and reliable one-pot approach using surface imprinting coating technique combined with polysaccharide incorporated sol-gel process was established to synthesize a new organic-inorganic hybrid matrix possessing macroporous surface and functional ligand. Using mesoporous silica gel being a support, immobilized metal affinity adsorbent with a macroporous shell/mesoporous core structure was obtained after metal ion loading. In the prepared matrix, covalently bonded coating and morphology manipulation on silica gel was achieved by using one-pot sol-gel process starting from an inorganic precursor, -glycidoxypropyltrimethoxysiloxane (GPTMS), and a functional biopolymer, chitosan (CS) at the atmosphere of imprinting polyethylene glycol (PEG). Self-hydrolysis of GPTMS, self-condensation, and co-condensation of silanol groups (Si-OH) from siloxane and silica gel surface, and in situ covalent cross-linking of CS created an orderly coating on silica gel surface. PEG extraction using hot ammonium hydroxide solution gave a chemically and mechanically stabilized pore structure and deactivated residual epoxy groups. The prepared matrix was characterized by using X-ray energy dispersion spectroscopy (EDX), scanning electron microscopy (SEM) and mercury intrusion porosimetry. The matrix possessed a high capacity for copper ion loading. Protein adsorption performance of the new immobilized metal affinity adsorbent was evaluated by batch adsorption and column chromatographic experiment using bovine serum albumin (BSA) as a simple model protein. Under the optimized coating conditions, the obtained macroporous surface resulted in a fast kinetics and high capability for protein adsorption, while the matrix non-charged with metal ions offered a low non-specific adsorption.     

PREPARATION OF CHITOSAN COATED METAL AFFINITY CHROMATOGRAPHY ADSORBENT

A new and an inexpensive adsorbent of chitosan coated silica for immobilized metal affinity chromatography(IMAC) was studied.After a double coating,the chitosan coated on silica beads could be up to 53.4mg/g silica beads.When pH>3.8,the metal ligand Cu^2+ was chelated on the coated chitosan with a bound capacity of 14.6mg/g chitosan without introducing iminodiacetic acid(IDA).     

Adsorption of doxorubicin on poly(methyl methacrylate)-chitosan-heparin-coated activated carbon beads

Extracorporeal filter cartridges, filled with an activated carbon bead (ACB) adsorbent, have been used for removal of overdosed cancer drugs from the blood. Coatings on adsorbent matrices, poly(methyl methacrylate) (PMMA)/activated carbon bead and PMMA/chitosan/heparin/ACB composites, were tested to improve their biocompatibility and blood compatibility. PMMA coating on ACBs was accomplished in a straightforward manner using a PMMA solution in ethyl acetate. A one-step hybrid coating of ACBs with PMMA-anticoagulant heparin required the use of acetone and water co-solvents. Multilayer coatings with three components, PMMA, chitosan, and heparin, involved three steps: PMMA was first coated on ACBs; chitosan was then coated on the PMMA-coated surface; and finally, heparin was covalently attached to the chitosan coating. Surface morphologies were studied by scanning electron microscopy. X-ray photoelectron spectroscopy confirmed the -SO(3)(-) group. Adsorption, of a chemotherapy drug (doxorubicin) from both water and phosphate-buffered saline, by the coated ACBs was examined. The adsorption isotherm curves were fitted using the Freundlich model. The current adsorption system might find potential applications in the removal of high-dose regional chemotherapy drugs while maintaining high efficiency, biocompatibility, and blood compatibility.     

Silica-supported Macroporous Chitosan Bead for Affinity Purification of Trypsin Inhibitor

Macroporous cross-linking chitosan layer coated on silica gel （CTS-SiO2） was prepared by phase inversion and polyethylene glycol （PEG）molecular imprinting methods. Formation of macroporous surtace was investigated by scanning electron microscopy （SEM） and BET analysis.The prepared bead was activated by reacting with 1,2-ethylene digiycidyl ether for introducing epoxy groups, and trypsin could be efficiently immobilized on the bead as a biospecific ligand.The bead bearing trypsin was employed to purify trypsin inhibitor （TIs） from egg white as affinity adsorbent.     

壳聚糖亲和磁性毫微粒的制备及其对蛋白质的吸附性能研究

以壳聚糖为包裹材料包埋自制的磁流体 ,制备了具有核 壳结构的磁性毫微粒 ,并偶联色素配基CibacronBlue 3GA(偶联量 1 4 .5μmol/mL)得到了一种新型亲和磁性毫微粒 .结果表明 ,所得亲和磁性微球具有较窄的粒径分布、形状规整 .以牛血清白蛋白 (BSA)和溶菌酶 (Lys)为目标蛋白 ,考察了该亲和磁性毫微粒的吸附性能 ,发现其对BSA和Lys的吸附量分别为 4和 2 8mg/g,吸附行为满足Langmuir吸附等温式 ,且对时间依赖性小而对溶液离子强度敏感 .     

Preparation of graphene oxide–chitosan composite and adsorption performance for uranium

The composite adsorbent graphene oxide–chitosan was prepared using graphite and chitosan as the initial materials. The structures and morphology of the products were characterized by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy. The products were used to remove uranium from aqueous solution by batch adsorption experiments. The effects of pH, adsorbent dosage, contact time, initial uranium concentration and temperature on the uranium removal were investigated, and the results were fitted by the adsorption isotherm models. The adsorption kinetic and thermodynamic were also studied in detail.     

磁性壳聚糖微球对牛血清白蛋白的吸附性能

在微乳液体系中, 以戊二醛为交联剂制备了磁性壳聚糖纳米粒子(Fe₂O₃-CS). 采用透射电子显微镜(TEM)、红外光谱(IR)、振动样品磁强计(VSM)等手段对纳米粒子进行表征. 结果表明, 纳米粒子的粒径在40 nm左右, 分散性良好, 具有较好的磁响应性能. 以碳二亚胺(EDC)为活化剂, 研究了Fe₂O₃-CS纳米粒子对牛血清白蛋白(BSA)分子的吸附性能, 并使用原子力显微镜(AFM)、紫外分光光度计(UV)进行表征. Fe₂O₃-CS粒子对BSA 的吸附大致符合Langmuir吸附模型, 298 K时饱和吸附量约为250 mg·g^-1, 吸附常数为0.007 L·mg^-1. 将BSA-粒子分散在不同pH的缓冲溶液中, 研究BSA-粒子复合物的稳定性. 用聚丙烯酰氨凝胶电泳(SDS-PAGE)对结果进行表征, 发现在碱性条件下BSA分子能从磁性粒子表面脱附下来.     

Synthesis and Properties of Surface Molecular Imprinting Adsorbent for Removal of Pb<Superscript>2+</Superscript>

A new chitosan imprinting adsorbent using diatomite as core material was prepared by using the surface molecular imprinting technology with the Pb²⁺ as imprinted ion. The preparation process conditions of the surface molecular imprinting adsorbent were studied. The adsorbent was characterized by using Fourier transform infrared (FTIR) spectrum. FTIR spectrum indicated that it was cross-linked by epichlorohydrin. The new imprinting adsorbent could provide a higher adsorption capacity for Pb²⁺, which reached 139.6 mg/g increasing 32.3% compared with cross-linking chitosan adsorbent (the initial Pb²⁺ concentration of 600 mg/L). The adsorption velocity was quick and the equilibration time of the imprinting adsorbent for Pb²⁺ was 3 h that shortened about 40% compared with cross-linking chitosan adsorbent. It had a more wide pH range of 5–7 than that of cross-linking chitosan adsorbent. The new imprinting adsorbent can be reused for up to ten cycles without loss of adsorption capacity. In the kinetics and isotherm study, the pseudosecond order model and Langmuir model could represent the adsorption process.     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

1. INTRODUCTION Chitosan is a hydrolyzed derivative of chitin and belongs to a family of linear unbranched polysaccharides which contain large amounts of 1,4-linked-2-amino-2-deoxy-β-D-glucan residues. The presence of free amine groups in chitosan enhances the solubility and reactivity of this polymer. Interest in modifying chitosan by using glutaraldehyde has recently increased. The derivatized polymers have been employed for many applications [1~2], including protein immobilization…     

Synthesis of anionic gemini surfactant-templated mesoporous silica nanoparticles and its adsorption application for Pb2+

Abstract

Amino-functionalized mesoporous silica nanoparticles (AFMSN) were prepared based on the self-assembly process of the pre-fabricated template of anionic gemini surfactant. The perfect mass ration of the reactants for the synthesis of the AFMSN with high surface area and amino loading was optimized by orthogonal experiments. Adsorption capability of the optimized product for lead ion (Pb²⁺) was investigated in detail. Specially, the effects of the amino content, solution pH, adsorbent dosage, temperature, and interference of other metal ions on the removal efficiency of Pb²⁺ were studied. It is found that these factors can greatly affect the removal efficiency of Pb²⁺ and the prepared adsorbent exhibits the high adsorption selectivity for Pb²⁺. At an optimal condition, the AFMSN adsorbent presents an excellent adsorption capacity for Pb²⁺ up to 211.42?mg/g. The adsorption kinetics study revealed that the pseudo-second-order model could well describe the Pb²⁺ adsorption process, and the adsorption isotherm was fitted well with the Langmuir model. More importantly, the AFMSN adsorbent could be recycled 8 times and a high adsorption efficiency of Pb²⁺ could still be maintained. Therefore, the prepared AFMSN adsorbent may find practical application in removing Pb²⁺ from the polluted water.     

两种固定化金属螯合复合亲和膜色谱介质制备

以纤维素滤纸为基质,通过碱处理、环氧活化、偶联亚氨基二乙酸二钠、固定化Ｃｕ＾２＋后制得了大孔纤维素亲和膜。另外,在活化后的膜上通过共价交联覆盖上琼脂糖,制得了具有类似“三明治”结构且性能优于的复合亲和膜,装柱后分别制得固定化金属螯合亲和膜色谱柱。对两种亲和膜进行牛血清白蛋白等温吸附测定显示,两者的最大吸附量分别为１．１７ｍｇ／ｃｍ＾２和１．３０ｍｇ／ｃｍ＾２,与传统的琼脂糖凝胶类介质吸附量相当,表     

A NOVEL METAL CHELATE AFFINITY ADSORBENT FOR PROTEIN UPTAKE

In this article,a spherical chitosan gel crosslinked by epichlorohydrin was prepared.It was then loaded with copper ions to produce a metal chelate affinity adsorbent for protein.The uptake of bovine serum albumin(BSA)by the affinity adsorbent was investigated.and the adsorption capacity for BSA as high as 40mg/g-wet beads was observed.The adsorption equilibrium data was well correlated by the Langmuir equation.The adsorption was considerably affected by pH.In additio.The amount of BSA adsorbed onto the beads decreased with the increasing of aqueous phase ionic strength,so adsorbed BAS can be desorbed by adjusting pH orionic strength of the solution.     

Polysaccharide-modified iron oxide nanoparticles as an effective magnetic affinity adsorbent for bovine serum albumin

The magnetic separation technique based on magnetic iron oxide nanoparticles (MNPs) has potential applications in protein adsorption and purification, enzyme immobilization, cell sorting, nucleic acid detachment, and drug release. However, the naked MNPs are often insufficient for their hydrophilicity, colloidal stability, and further functionalization. To overcome these limitations, chitosan was firstly carboxymethylated and then covalently conjugated on the surface of the MNPs ranging in size from about 5 to 15 nm, which were prepared by co-precipitating iron (II) and iron (III) in alkaline solution and then treating under hydrothermal conditions. It was found that such modification did not result in the phase change of the MNPs, and the resultant modified nanoparticles were still superparamagnetic. In particular, the colloidal stability of MNPs in aqueous suspension was improved after the surface modification. By investigating the adsorption of bovine serum albumin (BSA) on the modified MNPs, it was observed that the adsorption capacity of the BSA on the modified MNPs increased rapidly within several minutes and then reached the maximum value at about 10 min. The adsorption equilibrium isotherm could be fitted well by the Langmuir model. The medium pH affected greatly the adsorption of the BSA. The maximum adsorption of the BSA occurred at the pH value close to the isoelectric point of the BSA, with a saturation adsorption amount of 94.45 mg/g (25 °C). For the BSA feed concentration of 1.017 mg/ml, a high desorption percentage of 91.5% could be achieved under an alkaline condition (pH 9.4).     

Surface and biological activity of sophorolipid molecules produced by Wickerhamiella domercqiae var. sophorolipid CGMCC 1576

The ion-imprinted magnetic chitosan resins (IMCR) prepared using U(VI) as a template and glutaraldehyde as a cross-linker showed higher adsorption capacity and selectivity for the U(VI) ions compared with the non-imprinted magnetic chitosan resins (NIMCR) without a template. The results showed that the adsorption of U(VI) on the magnetic chitosan resins was affected by the initial pH value, the initial U(VI) concentration, as well as the temperature. Both kinetics and thermodynamic parameters of the adsorption process were estimated. These data indicated an exothermic spontaneous adsorption process that kinetically followed the second-order adsorption process. Equilibrium experiments were fitted in Langmuir, Freundlich, and Dubinin-Radushkevich adsorption isotherm models to show very good fits with the Langmuir isotherm equation for the monolayer adsorption process. The monolayer adsorption capacity values of 187.26 mg/g for IMCR and 160.77 mg/g for NIMCR were very close to the maximum capacity values obtained at pH 5.0, temperature 298 K, adsorbent dose 50 mg, and contact time 3 h. The selectivity coefficient of uranyl ions and other metal ions on IMCR indicated an overall preference for uranyl ions. Furthermore, the IMCR could be regenerated through the desorption of the U(VI) ions using 0.5 M HNO(3) solution and could be reused to adsorb again.     

Kinetics and equilibrium studies of adsorption of chromium(VI) ion from industrial wastewater using Chrysophyllum albidum (Sapotaceae) seed shells

A new biosorbent has been prepared by coating Chrysophyllum albidum (Sapotaceae) seed shells with chitosan and/or oxidizing agents such as sulfuric acid. This study investigated the technical feasibility of activated and modified activated C. albidum seed shells carbons for the adsorption of chromium(VI) from aqueous solution. The sorption process with respect to its equilibria and kinetics as well as the effects of pH, contact time, adsorbent mass, adsorbate concentration and particle size on adsorption was also studied. The most effective pH range was found to be between 4.5 and 5 for the sorption of the metal ion. The pseudo-first-order rate equation by Lagergren and pseudo-second-order rate equation were tested on the kinetic data, the adsorption process followed pseudo-second-order rate kinetics, also, isotherm data was analyzed for possible agreement with the Langmuir and Freundlich adsorption isotherms, the Freundlich and Langmuir models for dynamics of metal ion uptake proposed in this work fitted the experimental data reasonably well. However, equilibrium sorption data were better represented by Langmuir model than Freundlich. The adsorption capacity calculated from Langmuir isotherm was 84.31, 76.23 and 59.63 mg Cr(VI)/g at initial pH of 3.0 at 30 °C for the particle size of 1.00–1.25 mm with the use of 12.5, 16.5 and 2.1 g/L of CACASC, CCASC and ACASC adsorbent mass, respectively. This readily available adsorbent is efficient in the uptake of Cr(VI) ion in aqueous solution, thus, it could be an excellent alternative for the removal of heavy metals and organic matter from water and wastewater.     

树脂填充聚醚砜纤维吸附剂对牛血清蛋白吸附性能的研究

重点研究树脂填充聚醚砜(PES)纤维吸附剂与模型蛋白质牛血清蛋白(BSA)之间的吸附与脱附行为.结果表明,蛋白质BSA在树脂填充PES纤维吸附剂中的平衡吸附过程较好地符合朗格缪尔吸附模型,树脂Lewatit CNP80ws填充PES吸附剂的最大吸附容量约为139mg BSA/g吸附剂.表面具有开孔结构的树脂填充PES纤维吸附剂的吸附速率较快,在不同结构纤维吸附剂中BSA的扩散系数在1·82×10-14~8·7×10-14m2/s范围内变化.另外,考察了BSA溶液的pH与洗脱剂等因素对吸附剂吸附与脱附性能的影响,研究结果对蛋白质的实际分离纯化具有重要的参考价值.     

Study of Protein Adsorption/Adhesion Behaviors on Solid Beads Surface with Different Surface Properties

Three kinds of chitosan (CS) derivatives have been prepared via polyethyleneimine (PEI) or polyethylene glycol (PEG) together with PEI modified chitosan. FTIR, x-ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA)/differential thermal analysis (DTA) proved the successful linkage, and XPS and zeta potential analysis show that these derivatives beads possess different surface nature. The PEI modified chitosan derivative is made in acid solution (A-PEI-CS) and the one added with additional PEG (PEG–CS-PEI) has showed higher swelling degree than their counterpart derivative prepared at basic condition (B-PEI-CS). Although the nitrogen content of A-PEI-CS is higher than that of B-PEI-CS, due to the better surface hydrophilicity, the B-PEI-CS beads are more capable of adsorbing bovine serum albumin (BSA) protein. Electrostatic attraction facilitates protein adsorption in a narrow acidic pH range while hydrophilicity hinders protein adhering to the beads’ surface at any pH.     

浮石负载壳聚糖吸附去除水中丙溴磷

通过浮石负载壳聚糖制备了吸附剂壳聚糖/浮石复合物,采用扫描电子显微镜(SEM)、热重分析(TGA)、元素分析、傅里叶红外光谱(FT-IR)、X射线衍射(XRD)和X射线荧光光谱(XRF)等技术手段表征了吸附剂性质,考察了吸附剂量、吸附时间、溶液pH值、离子强度和温度对该吸附剂吸附去除水中丙溴磷的影响,研究了再生吸附剂的吸附性能。结果表明,负载在浮石上的壳聚糖占吸附剂总量的8.69%;在p H值3.0~7.0内,壳聚糖/浮石对丙溴磷的吸附率大于90%;这种吸附剂对丙溴磷的吸附受溶液离子强度影响较小,随温度升高而稍微减小。在溶液温度25℃、pH=7.0、丙溴磷浓度40 mg/L、壳聚糖/浮石剂量为0.7 g/L和吸附平衡时间为90 min条件下,此吸附剂对丙溴磷最大吸附率为93.3%(最大吸附量为53.4 mg/g)。壳聚糖/浮石连续经过3次吸附/再生循环,每次循环对丙溴磷的吸附率下降约12%。可见壳聚糖/浮石通过吸附可有效地去除水中的农药丙溴磷。     

羧甲基壳聚糖对亚铁离子的吸附

壳聚糖是由甲壳素经脱乙酰基后得到的一种天然高分子氨基多糖 ,它是金属离子的良好配体 ,其配合物在工业、农业、食品、环保、医药等方面的应用已有许多研究 [1～ 4 ] .脱乙酰基后的壳聚糖溶解性有很大改善 ,但仍只能溶于酸或酸性水溶液 ,限制了它的推广应用 .通过化学改性的羧甲基壳聚糖 ( CMCS)具有良好的水溶性、保湿性、乳化性 ,其分子中含有— OH、— NH2 、—COOH等基团 ,能有效络合金属离子 [5] .人体对壳聚糖 -亚铁络合物的吸收远远大于传统的 Fe SO4 药物 [6 ] ,壳聚糖及其衍生物与 Fe2 的络合物有可能用于治疗缺铁性贫血 …     

Mechanisms and kinetics of trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate adsorption onto chitosan

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.