荧光检定用镍铬合金标准物质的研制

对荧光检定用镍铬合金标准物质的制备技术进行了研究,并考察了标准物质的均匀性和稳定性,分析了定值不确定度.经检验,该标准物质具有良好的均匀性和稳定性,定值数据呈正态分布,各实验室定值数据等精度.镍、铬含量的标准值分别为68.29%和28.35%,定值结果的相对扩展不确定度分别为0.7%和2%(k=2).     

4,9-脱水河豚毒素国家标准样品的研制

研制4,9-脱水河豚毒素国家标准样品。以河豚鱼卵巢为原料,提取制备4,9-脱水河豚毒素,采用红外光谱(IR)、高分辨质谱和核磁共振谱(NMR)进行结构确证。样品分装成140瓶后,采用柱后衍生–高效液相荧光法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;稳定性考察按照40℃加速试验稳定性(6个月)进行,结果表明在考察期间内样品稳定性良好;标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,4,9-脱水河豚毒素标准样品定值结果为97.77%,相对扩展不确定度为0.4%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关脱水河豚毒素的方法校正和质量控制。     

GC–MS校准用异辛烷中八氟萘标准溶液的研制

采用重量–容量法研制了气相色谱–质谱(GC–MS)校准用100.1 pg/μL异辛烷中八氟萘溶液标准物质,分别用F检验和回归曲线法对研制的溶液标准物质进行了均匀性和稳定性检验,对定值结果的不确定度进行了评定。结果表明,研制的异辛烷中八氟萘溶液标准物质具有良好的均匀性和稳定性,定值结果的相对扩展不确定度为3%(k=2)。该标准物质可用于GC–MS联用仪的EI源及负CI源的信噪比校准。     

牛磺酸标准物质的研制

研制了牛磺酸标准物质。采用红外光谱(IR)法对牛磺酸进行定性,经均匀性初检后分装成200瓶样品,利用超高效液相色谱(UPLC)及高效毛细管电泳(HPCE)两种不同原理的方法进行定值,从样品中随机抽取15瓶采用超高效液相色谱(UPLC)法进行了均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好,稳定性考察按照短期稳定性(1个月)和长期稳定性(12个月)分别进行,结果表明在考察期间样品稳定性良好。评定了定值结果的不确定度,牛磺酸标准物质定值结果为99.6%,相对扩展不确定度为0.5%(k=2)。     

岩藻黄质标准样品的研制

研制了岩藻黄质标准样品。以海带为原料,通过提取、分离纯化制备高纯岩藻黄质,采用红外光谱(IR)、高分辨质谱(MS)和核磁共振谱(NMR)进行结构确证。样品分装成150瓶样品后,采用高效液相色谱–紫外检测法进行均匀性、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;在–18℃条件下,进行24个月长期稳定性考察,结果表明样品在24个月内稳定性良好;标准样品经国内8家具有分析资质的实验室进行协同定值,并评定了定值结果的不确定度,岩藻黄质标准样品定值结果为99.53%,相对扩展不确定度为0.22%(k=1.96)。该标准样品达到标准样品的技术要求,可用于有关岩藻黄质相关产品的方法校正和质量控制。     

烟用接装纸质控样品的制备与应用

采用深珠光印字烟用接装纸作为质控样品,用微波消解处理质控样品,以电感耦合等离子体质谱法(ICP–MS)对样品的铬、砷、铅含量进行定值,并进行不确定度评定。利用方差分析评价均匀性,ADF检验评价稳定性。经F检验表明在95%的置信区间,制备的烟用接装纸质控样品均匀性良好;经ADF检验表明,各元素在1%的显著水平下稳定可靠,样品稳定性良好。将烟用接装纸质控样品用于质控,并绘制Levy–Jennings质控图,质控效果良好。     

含铅黄铜儿童仿真饰品标准物质的研制

4介绍含铅黄铜儿童仿真饰品标准物质的研制方法。以铜锭、锌锭、铅粒为原料,利用坩埚熔炼及模具加工制备黄铜儿童仿真饰品标准物质,采用电感耦合等离子体发射光谱法进行均匀性检验、稳定性检验和定值。从样品中随机抽取15份进行均匀性检验,经F检验表明在95%的置信区间内样品均匀性良好。在常温条件下,经过12个月长期稳定性试验考察,结果表明样品稳定性良好。铅含量定值结果为136.1 mg/kg,合成扩展不确定度为0.72 mg/kg(k=2)。该标准物质满足ISO Guide 35:2006技术要求,可用于黄铜儿童仿真饰品检测的方法校正和质量控制。     

ITO成分分析标准物质的研制

研制3种掺杂铁、铜、铅、锌、钙、镁金属元素的氧化铟锡(ITO)成分分析标准物质。采用溶胶凝胶和共沉淀相结合的方法制备标准物质候选物,用电感耦合等离子体发射光谱法对其进行均匀性、稳定性检验及定值分析。采用8家具有资质的实验室对研制的标准物质进行协作定值,对定值结果的不确定度进行评定。结果表明:研制的ITO成分分析标准物质具有良好的均匀性和稳定性,3种标准物质中氧化锡含量在1%~10%之间,相对扩展不确定度为0.7%~6.6%(k=2);6种掺杂元素含量在0.05%~0.30%之间,相对扩展不确定度为3.4%~11%(k=2)。     

硫酸氨基葡萄糖标准样品的研制

研制了硫酸氨基葡萄糖标准样品。以盐酸氨基葡萄糖为原料,制备高纯硫酸氨基葡萄糖,采用红外光谱(IR)、高分辨质谱和核磁共振谱(NMR)进行结构确证。样品分装成200瓶样品后,采用高效液相色谱–蒸发光散射法进行均匀性检验、稳定性检验和定值分析。从样品中随机抽取15瓶进行均匀性检验,结果表明在95%的置信区间范围内样品均匀性良好。按照25℃长期试验稳定性(12个月)进行稳定性考察,结果表明在考察期间内样品稳定性良好。标准样品经国内8家具有分析资质的实验室进行协同定值,硫酸氨基葡萄糖标准样品定值结果为99.84%,相对扩展不确定度为0.18%(k=1.96)。该标准样品达到国家标准样品的技术要求,可用于有关硫酸氨基葡萄糖的分析方法校正和质量控制。     

镍释放量标准物质的研制

研制了镍释放量标准样品。以铜粉、锌粉、镍粉为原料,通过熔炼炉熔炼及模具加工制备镍释放量标准物质,采用能量色散荧光光谱法(EDX)确认镍含量。样品分装成200份,采用电感耦合等离子体光谱法(ICP)进行均匀性、稳定性检验和定值分析。从样品中随机抽取15份进行均匀性检验,经F检验表明在95%的置信区间范围内样品均匀性良好;在常温条件下,经过12个月长期试验稳定性考察,统计值t均小于临界值2.571,结果表明样品稳定性良好。镍释放量定值结果为1.121μg/(cm~2·week)。对镍释放量定值结果进行了不确定度评估,扩展不确定度为0.300μg/(cm~2·week)(k=1.96)。该镍释放量标准物质符合检测需要,可用于合金产品镍释放量检测的方法校正和质量控制。     

Certified reference materials—Hay Powder (CRM 129) and Rye Grass (CRM 281)—for the quality control of analysis of animal feed

Analyses of nutritive elements are routinely performed in grass or hay for animal feed in order to improve the state of health and growth of domestic animals. To control the quality of such determinations, the Community Bureau of Reference (BCR) so far has produced two certified reference materials: Hay Powder (CRM 129) and Rye Grass (CRM 281). After a careful preparation procedure of the materials, a homogeneity study and a long-term stability study, the contents of the elements Ca, K, Mg, P, S, Zn, I, N and Kjeldahl-N were certified in CRM 129, whereas CRM 281 was certified for As, B, Cd, Cu, Hg, Mn, Mo, Ni, Pb, Sb, Se and Zn. This paper presents the certification exercise and especially concentrates on the elements I, B and Mo as examples of analytical work. Indicative values for Co, Cr, Fe, Cl and Na were also obtained.     

钨合金标准物质的研制

介绍钨合金标准物质的研制过程,实验结果表明该标准物质的均匀性、稳定性良好,定值准确可靠,符合ＪＪＧ１００６《一级标准物质技术规范》的要求。     

加替沙星纯度标准物质研制

研制加替沙星纯度标准物质。采用质量平衡法和氢谱定量核磁法对加替沙星纯度标准物质候选物进行纯度定值,采用卡尔费休法和热重分析法准确测量了影响主成分纯度的水分含量,并考察了水分含量的稳定性。开展了加替沙星纯度定值、均匀性检验、稳定性考察以及不确定度评估。结果表明,加替沙星纯度标准物质的纯度值为93.1%,扩展不确定度为0.6%(k=2),水分含量为6.6%,特性量值均匀性良好,6个月稳定性可靠,被认定为国家二级标准物质,编号为GBW(E) 100476。研制的加替沙星纯度标准物质填补了国内空白,同时也为吸湿性较强的药物纯度标准物质研制过程中水分测定提供了参考与借鉴。     

Certification for trace elements and methyl mercury mass fractions in IAEA-452 scallop (Pecten Maximus) sample

A marine certified reference material (CRM), IAEA-452, prepared with scallop (Pecten maximus) sample was recently produced by the International Atomic Energy Agency (IAEA) and certified for trace elements and methyl mercury (MeHg). The Scallop (Pecten maximus) sample is commonly found and consumed seafood and is also used as bio-indicators for trace metal contamination in marine pollution studies. This paper presents the sample preparation methodology, material homogeneity and stability studies, evaluation of certification campaign results, the assignment of property values and their associated uncertainty. The reference values and associated expanded uncertainty for 9 trace elements (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb and Zn) and MeHg in scallop sample are established. The informative value for one more element (Ni) is also given. The new CRM can be used for the development and validation of analytical methods for determination of trace elements and methyl mercury in seafood and also for quality assurance/quality control purposes.     

铝合金化学成分标准物质的研制

介绍铝合金化学成分标准物质的研制过程。采用中频感应电炉熔炼法制备了铝合金化学成分标准物质候选物,并对标准物质候选物的均匀性和稳定性进行了考察。选择6家具有资质的实验室对研制的标准物质中各化学成分进行协作定值,并对各元素定值的不确定度进行评定。结果表明,在95%的置信区间内标准物质均匀性良好,经过13个月稳定性考察试验,标准物质稳定性良好。Si,Fe,Cu,Mn,Mg,Ti,Cd,V,Zr,B,Sn,Zn的定值结果分别为0.013 8%,0.012 5%,2.868%,0.185%,0.014 0%,0.082 8%,0.041 7%,0.032 9%,0.031 4%,0.003 8%,0.003 4%,0.025 6%,定值结果的相对扩展不确定度为1.4%~9.0%(k=2)。研制的标准物质达到相关技术要求,可用于该类铝合金材料的质量控制。     

钛合金光谱分析用标准物质的均匀性检验

介绍钛合金光谱分析用标准物质均匀性检验的抽样、测试、检验及判断方法。钛合金光谱分析用标准物质中碳和铝的均匀性检验结果表明此两种元素在试样中的分布是均匀的。该方法已应用于钛合金光谱分析用标准物质的研制过程中。     

Development of a certified reference material for the determination of acrylamide in potato chips

A certified reference material (CRM), KRISS CRM 108-10-003, has been developed for analysis of acrylamide in potato chips, as a representative of carbohydrate-rich food cooked in high-temperature oil. The material was prepared by grinding commercially available potato chips to a paste which was then homogenized, bottled in 15-g units, and stored at ?70 °C. Certification, homogeneity and stability testing, were carried out by liquid chromatography–isotope-dilution mass spectrometry (ID-LC–MS). A single ID-LC–MS measurement was performed for each of 10 selected units for certification and homogeneity assessment. The mean measurement result for the 10 bottles, 0.455?±?0.012 mg?kg^?1, was assigned as the certified value of the CRM. The between-bottle homogeneity was 0.8% of the certified value. The within-bottle homogeneity, tested by measuring three replicate sub-samples from each of three randomly selected bottles, was similar to the between-bottle homogeneity. The stability of the CRM under storage conditions (?70 °C) was tested for 21 months and no change in the acrylamide content was observed within the measurement uncertainty. Stability of the CRM at –20 °C (storage at user’s site) and room temperature (for regular use and transportation) was also tested. Also presented is the newly designed procedure for evaluating the uncertainty of the certified value for the characterization scheme used in this study.

Characterization of NIES CRM No. 23 Tea Leaves II for the determination of multielements

A candidate environmental certified reference material (CRM) for the determination of multielements in tea leaves and materials of similar matrix, NIES CRM No. 23 Tea Leaves II, has been developed and characterized by the National Institute for Environmental Studies (NIES), Japan. The origin of the material was tea leaves, which were ground, sieved through a 106-μm mesh, homogenized, and then subdivided into amber glass bottles. The results of homogeneity and stability tests indicated that the material was sufficiently homogeneous and stable for use as a reference material. The property values of the material were statistically determined based on chemical analyses by a network of laboratories using a wide range of methods. Sixteen laboratories participated in the characterization, and nine certified values and five reference values were obtained. These property values of the candidate CRM, which are expressed as mass fractions, were close to the median and/or mean values of the mass fractions of elements in various tea products. The candidate CRM is appropriate for use in analytical quality control and in the evaluation of methods used in the analysis of tea and materials of similar matrix.     

Development of bovine serum albumin certified reference material

We present the development process for National Institute of Metrology (NIM) bovine serum albumin (BSA) certified reference material (CRM). Each CRM unit contains about 200 mg of purified BSA. The moisture, ignition residue, molecular weight, and high-performance liquid chromatography (HPLC) purity were analyzed and mass spectrometry based protein identification was carried out to ensure the material was BSA. Both amino acid based isotope dilution mass spectrometry (IDMS) and a purity deduction method were selected for value assignment. The certified value was the average of the IDMS and the purity deduction result. HPLC purity analysis was used to examine the homogeneity and stability of solid BSA CRM. Fifteen units were selected for between-bottle homogeneity examination and seven subsamples from the same bottle were selected for within-bottle homogeneity examination. Statistics showed the CRM passed both the between-bottle and the within-bottle homogeneity examination. The CRM stability under storage conditions (-20 °C) was tested for 18 months and no trend was observed. Uncertainties from the balance, amino acid purity, hydrolysis, method reproducibility, homogeneity, and stability were taken into account in uncertainty evaluation. The final certified value of NIM BSA CRM is (0.963±0.038) g/g.     

肌酐纯度标准物质的定值方法及其不确定度评定研究

通过定性及定量分析,研究了肌酐纯度标准物质的定值方法,并进行了定值分析的不确定度评定。首先使用三重四极杆质谱仪及核磁共振谱仪(氢谱)对肌酐样品进行定性分析,然后采用质量平衡法(包括液相色谱法、水分、灰分、挥发性物质和无机元素分析)与定量核磁共振法共同对肌酐纯度标准物质进行准确定值,最后对定值结果进行不确定度评定。肌酐的定值结果为99.7%,扩展不确定度为0.4%。该研究对于实际检测中肌酐的准确测定及临床上相关疾病的正确诊断治疗具有重要意义,且经过定值的肌酐纯品还可做定量核磁共振法的定量内标使用。定量分析后的肌酐经过均匀性检验和稳定性考察后可申报为国家标准物质。