Dendronized scorpionate complexes of molybdenum in low and high oxidation states

Tridentate (L(3)) and bidentate (L(2)) poly(pyrazolyl)methane ligands (Gn-dend)OCH(2)C(pz)(3) (1-4) and (Gn-dend)CH(3,5-Me(2)pz)(2) (pz = pyrazol-1-yl) have been used to synthesize the molybdenum(0) complexes [Mo(CO)(3)(L(3))] (G0-G3, 5-8), [Mo(CO)(4)(L(2))] (G0-G1, 13-14), and [Mo(CO)(3)(NCMe)(L(2))] (G0, 15), and the molybdenum(VI) complexes [MoCl(2)O(2)(L(2))] (9-12). The G0-G3 prefixes represent the generation of poly(aryl ether) dendrons in which the metal complexes are embedded. The molecular structures of compounds 13 and 15 have been determined by X-ray diffraction studies and the hydrodynamic radii of tricarbonyl complexes 5-8 calculated by diffusion-ordered NMR spectroscopy (DOSY). Molybdenum(VI) compounds 9-12 have also been evaluated as catalysts for olefin epoxidation, showing comparable but inferior performances than ligand-free MoCl(2)O(2), probably because of the labile coordination of L(2).     

Synthesis and catalytic application of octahedral lewis base adducts of dichloro and dialkyl dioxotungsten(VI)

Complexes of the composition W(O)(2)(Cl)(2)L(2) and W(O)(2)(R)(2)L(2) (R = Me, Et; L(2) = bidentate Lewis base ligand) have been prepared and are fully characterized (including an exemplary X-ray crystal structure of W(O)(2)(Cl)(2)(4,4'-di-tert-butyl-2,2'-bipyridine)). This latter compound crystallizes in the orthorhombic space group P2(1)2(1)2(1) with a = 8.3198(1) A, b = 13.3224(2) A, c = 18.0415(2) A, and Z = 4. The title complexes are applied as catalysts in olefin epoxidation catalysis with tert-butyl hydroperoxide (TBHP) as the oxidizing agent. The W(VI) complexes display only moderate turnover frequencies but can be reused several times without loss of catalytic activity. The highest activity can be achieved at reaction temperatures of ca. 90 degrees C. Chloro derivatives are somewhat more active than alkyl complexes, and sterically less crowded complexes show also higher activities than their congeners with bulky ligands L(2). Kinetic examinations show that the catalyst formation is the rate determining step and it is observed that tert-butyl alcohol, the byproduct of the epoxidation reaction, acts as a competitor for TBHP, thus lowering the reaction velocity during the course of the reaction but not irreversibly destroying the catalyst.     

Two hydrogen-bond-cross-linked molybdenum (VI) network polymers: synthesis, crystal structures and cyclooctene epoxidation with H2O2

Two molybdenum (VI) hydrogen-bonded network polymers [MoO₂F₄]·(4,4′-H₂bpd)(H₂O)₂ (1) and [MoO₂Cl₃(H₂O)]·(4,4′-H₂bpd)Cl (2) (bpd = bipiperidine) have been synthesized and examined as catalysts for epoxidation of cyclooctene. Complexes of the Mo compounds containing the bpd ligand are prepared and characterized by infrared spectroscopy, thermogravimetric and elemental analyses. They have been structurally characterized by single crystal X-ray diffraction analysis. The structures of both the complexes are shown to be comprised of molybdenum and two protonated N-ligand cations that have resulted in a cross-linked hydrogen-bonded network structure. These complexes are applicable as catalysts for the cis-cyclooctene epoxidation reactions with hydrogen peroxide as a source of oxygen and NaHCO₃ as a cocatalyst. It has been observed that the formation of the oxidant peroxymonocarbonate ion, HCO₄ ⁻ by hydrogen peroxide and bicarbonate enhances the epoxidation reaction. Both the complexes have exhibited a good activity and a very high selectivity for the formation of cyclooctene oxide. An erratum to this article can be found at     

Synthesis and catalytic properties of molybdenum(VI) complexes with tris(3,5-dimethyl-1-pyrazolyl)methane

The complex [MoO(2)Cl{HC(3,5-Me(2)pz)(3)}]BF(4) (1) (HC(3,5-Me(2)pz)(3) = tris(3,5-dimethyl-1-pyrazolyl)methane) has been prepared and examined as a catalyst for epoxidation of olefins at 55 °C using tert-butyl hydroperoxide (TBHP) as the oxidant. For reaction of cis-cyclooctene, epoxycyclooctane is obtained quantitatively within 5 h when water is rigorously excluded from the reaction mixture. Increasing amounts of water in the reaction mixture lead to lower activities (without affecting product selectivity) and transformation of 1 into the trioxidomolybdenum(VI) complex [{HC(3,5-Me(2)pz)(3)}MoO(3)] (4). Complex 4 was isolated as a microcrystalline solid by refluxing a suspension of 1 in water. The powder X-ray diffraction pattern of 4 can be indexed in the orthorhombic Pnma system, with a = 16.7349(5) ?, b = 13.6380(4) ?, and c = 7.8513(3) ?. Treatment of 1 in dichloromethane with excess TBHP led to isolation of the symmetrical [Mo(2)O(4)(μ(2)-O){HC(3,5-Me(2)pz)(3)}(2)](BF(4))(2) (2) and unsymmetrical [Mo(2)O(3)(O(2))(2)(μ(2)-O)(H(2)O){HC(3,5-Me(2)pz)(3)}] (3) oxido-bridged dimers, which were characterized by single-crystal X-ray diffraction. Complex 2 displays the well-known (Mo(2)O(5))(2+) bridging structure where each dioxidomolybdenum(VI) center is coordinated to three N atoms of the organic ligand and one μ(2)-bridging O atom. The unusual complex 3 comprises dioxido and oxidodiperoxo molybdenum(VI) centers linked by a μ(2)-bridging O atom, with the former center being coordinated to the tridentate N-ligand. The dinuclear complexes exhibit a similar catalytic performance to that found for mononuclear 1. For complexes 1 and 2 use of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate and N-butyl-3-methylpyridinium tetrafluoroborate as solvents allowed the complexes to be completely dissolved, and in each case the catalyst and IL could be recycled and reused without loss of activity.     

New chloro,mu-oxo,and alkyl derivatives of dioxomolybdenum(VI) and -tungsten(VI) complexes chelated with N(2)O tridentate ligands: synthesis and catalytic activities toward olefin epoxidation

A new series of cis-dioxomolybdenum(VI) complexes MoO(2)(L(n))Cl (n = 1-5) were prepared by the reaction of MoO(2)Cl(2)(DME) (DME = 1,2-dimethoxyethane) with 2-N-(2-pyridylmethyl)aminophenol (HL(1)) or its N-alkyl derivatives (HL(n)) (n = 2-5) in the presence of triethylamine. The new mu-oxo dimolybdenum compounds [MoO(2)(L(n))](2)O (n = 1, 4, 5, 7) were also prepared by treating the corresponding ligand HL(n) with MoO(2)(acac)(2) (acac = acetylacetonate) in warm methanolic solutions or (NH(4))(6)[Mo(7)O(24)].4H(2)O in the presence of dilute HCl. Treatment of MoO(2)(L(1))Cl or [MoO(2)(L(1))](2)O with the Grignard reagent Me(3)SiCH(2)MgCl gave the alkyl compound MoO(2)(L(1))(CH(2)SiMe(3)), which represents the first example of dioxomolybdenum(VI) alkyl complex supported by a N(2)O-type ancillary ligand. The analogous chloro and mu-oxo tungsten derivatives WO(2)(L(n))Cl (n = 6, 7) and [WO(2)(L(n))](2)O (n = 1, 4, 6, 7) were prepared by the reaction of WO(2)Cl(2)(DME) with HL(n) in the presence of triethylamine. Similar to their molybdenum analogues, the tungsten alkyl complexes WO(2)(L(n))(R) (n = 6, 7; R = Me, Et, CH(2)SiMe(3), C(6)H(4)(t)Bu-4) were synthesized by treating WO(2)(L(n))Cl or [WO(2)(L(n))](2)O (n = 6, 7) with the appropriate Grignard reagents. The catalytic properties of selected dioxo-Mo(VI) and -W(VI) chloro and mu-oxo complexes toward epoxidation of styrene by tert-butyl hydroperoxide (TBHP) were also investigated.     

One-step synthesis of Mo(0) and W(0) bis(dinitrogen) complexes with the linear tetraphosphine ligand prP4: stereoselective formation of cis-[M(N2)2(rac-prP4)] and trans-[M(N2)2(meso-prP4)]; M = Mo, W

A new synthetic pathway to Chatt-type Mo(0) and W(0) bis(dinitrogen) complexes with the ligand prP(4) is presented (prP(4) is a linear tetraphos ligand with two ethylene bridges and a central propylene bridge). The synthesis starts from MoCl(5) and WCl(6), respectively, employing Mg as reductant. Whereas the electrochemical reduction of the oxido-iodido-molybdenum(IV) complex [Mo(O)I(meso-prP(4)](+) (1) only gave trans-[Mo(N(2))(2)(meso-prP(4))] (2a; R?mer et al., Eur. J. Inorg. Chem.2008, 3258), the direct synthesis under normal conditions affords both trans and cis complexes 2a and 2b. The reaction products are characterised by vibrational and NMR spectroscopy. Moreover, a single-crystal X-ray structure determination of cis-α-[Mo(N(2))(2)(rac-prP(4))] (2b) is performed. In contrast to the trans bis(dinitrogen)molybdenum(0) complex 2a supported by the meso prP(4) ligand the corresponding cis-complex is exclusively coordinated by the rac isomer of prP(4). The reactivity of 2 with acids is investigated as well, leading to the NNH(2) complex [MoF(NNH(2))(meso-prP(4))]BF(4) (15). Analogous results are obtained with the tungsten complexes.     

Four-coordinate Mo(II) as (silox)2Mo(PMe3)2 and its W(IV) congener (silox)2HW(eta2-CH2PMe2)(PMe3) (silox = tBu3SiO)

The reduction of [( (t) Bu 3SiO) 2MoCl] 2 ( 2 2) provided the cyclometalated derivative, (silox) 2HMoMo(kappa-O,C-OSi (t) Bu 2CMe 2CH 2)(silox) ( 3), and alkylation of 2 2 with MeMgBr afforded [( (t) Bu 3SiO) 2MoCH 3] 2 ( 4 2). The hydrogenation of 4 2 was ineffective, but the reduction of 2 2 under H 2 generated [( (t) Bu 3SiO) 2MoH] 2 ( 5 2), and the addition of 2-butyne to 3 gave [(silox) 2Mo] 2(mu:eta (2)eta (2)-C 2Me 2) ( 6), thereby implicating the existence of [(silox) 2Mo] 2 ( 1 2). The addition of (silox)H to Mo(NMe 2) 4 led to (silox) 2Mo(NMe 2) 2 ( 7), but further elaboration of the core proved ineffective. The silanolysis of MoCl 5 afforded (silox) 2MoCl 4 ( 8) and (silox) 3MoCl 3 ( 9) as a mixture from which pure 8 could be isolated, and the addition of THF or PMe 3 resulted in derivatives of 9 as (silox) 2Cl 3MoL (L = THF, 10; PMe 3, 11). Reductions of 11 and (silox) 2WCl 4 ( 15) in the presence of excess PMe 3 provided (silox) 2Cl 2MPMe 3 (M = Mo, 12; W, 16) or (silox) 2HW(eta (2)-CH 2PMe 2)PMe 3 ( 14). While "(silox) 2W(PMe 3) 2" was unstable with respect to W(IV) as 14, a reduction of 12 led to the stable Mo(II) diphosphine, (silox) 2Mo(PMe 3) 2 ( 17). X-ray crystal structures of 10 (pseudo- O h ), 12 (square pyramidal), and 14 and 17 (distorted T d ) are reported. Calculations address the diamagnetism of 12 and 16, and the distortion of 17 and its stability to cyclometalation in contrast to 14.     

NMR studies of heteropolyanion [P(2)W(20)O(70)(H2O)2](-10) complexes with metal cations

We have used multinuclear NMR and IR spectroscopy to study the interaction of a number of metal cations with monovacant heteropolyanion [P(2)W(20)O(7)(0)(H(2)O)(2)](10)(-) (P(2)W(20)) in aqueous solutions starting from its K salt. We have also prepared and studied P(2)W(20) in an Na-only medium. The observed differences in the NMR spectra of NaP(2)W(20)and KP(2)W(20)solutions and the importance of K(+) and Na(+) for the formation of P(2)W(20) suggest that this polyanion exists only as a complex with the alkaline cations. When both cations were simultaneously present in solution, we observed the broadening of the NMR signals of P(2)W(20)due to the Na-K exchange. Li(+) does not replace K(+) or Na(+) in such complexes, and in an Li-only medium P(2)W(20) does not form. Of all the M(n)(+) cations studied (Pd(2+), Bi(3+), Sn(4+), Zr(4+), Ce(4+), Ti(4+), V(5+), and Mo(6+)) only Bi(3+), Sn(4+), and Ce(4+) form complexes with P(2)W(20) in strongly acidic solutions. The (183)W and (119)Sn NMR data suggest that Sn(4+) forms in solution two mutually interconvertable P(2)W(20)Sn complexes of the composition P(2)W(20)O(70)(H(2)O)(3)SnOH(7)(-) and (P(2)W(20)O(70)(H(2)O)(3)Sn)(2)O(14)(-) while Bi(3+) forms one complex of the proposed composition P(2)W(20)O(70)(H(2)O)(2)Bi.(7)(-) We obtained complexes with Bi and Sn as free heteropoly acids and studied their thermostability in the solid state.     

Oxo/sulfidotungstate(VI) as precursors to W(VI)O2, W(VI)OS, and W(VI)S2 complexes and W(IV)-dithiolene chelate rings

Synthetic models leading to oxosulfidotungsten(VI) groups and dithiolene chelate rings have been investigated. The heterogeneous reaction systems [WO4-nSn]2-/2Ph3SiCl/Me4phen (n = 0-2) in acetonitrile afford the complexes [WQ2(OSiPh3)2(Me4phen)] (1-3) in the indicated yields containing the groups W(VI)O2 (1; 86%), W(VI)O2 (2; 45%), and W(VI)S2 (3; 83%). In the crystalline state these complexes have imposed C2 symmetry, with cis-oxo/sulfido and trans-silyloxide ligands. 1H NMR spectra indicate that this stereochemistry is retained in solution. The colors of 2 (yellow, 367 nm) and 3 (orange, 451 nm) arise from LMCT absorptions at the indicated wavelengths. These results demonstrate that the silylation procedure previously introduced for the preparation of molecules with the Mo(VI)OS group (Thapper, et al. Inorg. Chem. 1999, 38, 4104) extends to tungsten. Methods for the formation of dithiolene chelate rings MS2C2R2 in reactions with sulfide-bound M = Mo or W precursors are summarized. In a known reaction type, 3 and activated acetylenes rapidly form [W(IV)(OSiPh3)2(Me4phen)(S2C2R2)] (R = CO2Me, 4, 83%, and Ph, 5, 98%). In a new reaction type not requiring the isolation of an intermediate, the systems [MO2S2]2-/2Ph3SiCl/Me4phen/PhC=CPh in acetonitrile afford 5 (68%) and [Mo(IV)(OSiPh3)2(Me4phen)(S2C2Ph2)] (6; 61%). Complexes 5 and 6 are isostructural, maintain the trans-silyloxide stereochemistry, and exhibit chelate ring dimensions indicative of ene- 1,2-dithiolate coordination. Reductions in the -1.4 to -1.7 V range are described as metal-centered. It remains to be seen whether the oxo/sulfidotungsten(VI) groups in 1-3 eventuate in the active sites of tungstoenzymes. (Me4phen = 3,4,7,8-tetramethyl-1,10-phenanthroline.)     

Synthesis, Crystal Structure, UV-vis and EPR Studies of（ NH3CH2CH2NH2 ） 2.5 [ Mo0.5^（V）W0.5^（VI）O2 （ OC6H4O ） 2]

Cis-dioxo-metal complex ( NH3CH2CH2NH2 ) 2.5 [ Mo0.5^(V)W0.5^(VI)O2 ( OC6H4O ) 2] 1 was obtained by the reaction of tetra-butyl ammonium hexamolybdotungstate with 1, 2-dihydroxybenzene in the mixed solvent of CH3OH, CH3CN and ethylenediamine,and characterized by X-ray diffraction, UV-vis and EPR analysis. Compared with its analogous complexes (NH3CH2CH2NH2)3[Mo^(V)O2(OC6H40)2] 2 and (NH3CH2CH2NH2)2[W^(VI)O2(OC6H4O)2] 3, the results show that tungsten(VI) is less active in redox than molybdenum (VI) and that the change of the valence induced by substitution of W(VI) for Mo(V) in EMO2(OC6H40)2]n- does not influence the coordination geometry of the complex anion in which the metal center exhibits distorted octahedral coordination with cis-dioxo catechol. The responses to EPR of complexes 1 and 2 are active but complex 3 is silent,and the UV-vis spectra exhibited by the three complexes are obvious different because of the different electronic configuration between the central Mo(V) and W(VI) ions in the complexes.It is noteworthy that complexes 1 and 2 have the similar EPR signal to flavoenzyme, suggesting that the three complexes have the same coordination geometry feature with the co-factor of flavoenzyme.     

Cluster oxalate complexes [M3(mu3-Q)(mu2-Q2)3(C2O4)3]2- and [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2- (M = Mo, W; Q = S, Se): mechanochemical synthesis and crystal structure

Mechanochemical reaction of cluster coordination polymers 1infinity[M3Q7Br4] (M = Mo, W; Q = S, Se) with solid K2C2O4 leads to cluster core excision with the formation of anionic complexes [M3Q7(C2O4)3]2-. Extraction of the reaction mixture with water followed by crystallization gives crystalline K2[M3Q7(C2O4)3].0.5KBr.nH2O (M = Mo, Q = S, n = 3 (1); M = Mo, Q = Se, n = 4 (2); M = W, Q = S, n = 5 (3)). Cs2[Mo3S7(C2O4)3].0.5CsCl.3.5H2O (4) and (Et4N)1.5H0.5K{[Mo3S7(C2O4)3]Br}.2H2O (5) were also prepared. Close Q...Br contacts result in the formation of ionic triples {[M3Q7(C2O4)3](2)Br}5- in 1-4 and the 1:1 adduct {[Mo3S7(C2O4)3]Br}3- in 5. Treatment of 1 or 2 with PPh(3) leads to chalcogen abstraction with the formation of [Mo3(mu3-Q)(mu2-Q)3(C2O4)3(H2O)3]2-, isolated as (Ph4P)2[Mo3(mu3-S)(mu2-S)3(C2O4)3(H2O)3].11H2O (6) and (Ph4P2[Mo3(mu3-Se)(mu2-Se)3(C2O4)3(H2O)3].8.5H2O.0.5C2H5OH (7). All compounds were characterized by X-ray structure analysis. IR, Raman, electronic, and 77Se NMR spectra are also reported. Thermal decomposition of 1-3 was studied by thermogravimetry.     

Di- and tricobalt Dawson sandwich complexes: synthesis,spectroscopic characterization,and electrochemical behavior of Na(18)[(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)] and Na(17)[(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)

The reaction of the trivacant Dawson anion alpha-[P(2)W(15)O(56)](12-) and the divalent cations Co(2+) is known to form the tetracobalt sandwich complex [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-) (Co(4)P(4)W(30)). Two new complexes, with different Co/P(2)W(15) stoichiometry, [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) (Na(2)Co(2)P(4)W(30)) and [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) (NaCo(3)P(4)W(30)), have been synthesized as aqueous-soluble sodium salts, by a slight modification of the reaction conditions. Both compounds were characterized by IR, elemental analysis, and (31)P solution NMR spectroscopy. These species are "lacunary" sandwich complexes, which add Co(2+) cations according to Na(2)Co(2)P(4)W(30) + Co(2+) --> NaCo(3)P(4)W(30) + Na(+) followed by NaCo(3)P(4)W(30) + Co(2+) --> Co(4)P(4)W(30) + Na(+). A Li(+)/Na(+) exchange in the cavity was evidenced by (31)P dynamic NMR spectroscopy. The electrochemical behaviors of the sandwich complexes [(NaOH(2))Co(3)(H(2)O)(P(2)W(15)O(56))(2)](17-) and [(NaOH(2))(2)Co(2)(P(2)W(15)O(56))(2)](18-) were investigated in aqueous solutions and compared with that of [Co(4)(H(2)O)(2)(P(2)W(15)O(56))(2)](16-). These complexes showed an electrocatalytic effect on nitrite reduction.     

Multi-iron tungstodiarsenates. Synthesis,characterization, and electrocatalytic studies of alphabetabetaalpha-(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2)(12)(-)

Reaction of the trivacant lacunary complex, alpha-Na(12)[As(2)W(15)O(56)], with an aqueous solution of Fe(NO(3))(3).9H(2)O yields the sandwich-type polyoxometalate, alphabetabetaalpha-Na(12)(Fe(III)OH(2))(2)Fe(III)(2)(As(2)W(15)O(56))(2) (Na1). The structure of this complex, determined by single-crystal X-ray crystallography (a = 13.434(1) A, b = 13.763(1) A, c = 22.999(2) A, alpha = 90.246(2) degrees, beta = 102.887(2) degrees, gamma = 116.972(1) degrees, triclinic, Ponemacr;, R1 = 5.5%, based on 25342 independent reflections), consists of an Fe(III)(4) unit sandwiched between two trivacant alpha-As(2)W(15)O(56)(12)(-) moieties. UV-vis, infrared, cyclic voltammetry, and elemental analysis data are all consistent with the structure determined from X-ray analysis. Magnetization studies confirm that the four Fe(III) centers are antiferromagnetically coupled. A cyclic voltammogram of Na1 reveals that a three-wave W(VI) system replaces the two-wave W(VI) system found in the precursor alpha-As(2)W(15)O(56)(12)(-) complex. The observed modifications in the CV patterns of Na1 and alpha-As(2)W(15)O(56)(12)(-) are most likely due to subsequent changes in the acid-base properties of two reduced POMs that occur as a result of Fe(III) incorporation. Na1 is shown to be more efficient than the monosubstituted complex alpha(2)-As(2)(Fe(III)OH(2))W(17)O(61)(7)(-) in the electrocatalytic reduction of dioxygen. This is attributed to cooperativity effects among the adjacent Fe(III) centers in Na1.     

Anion-directed crystallization of coordination polymers: syntheses and characterization of Cu(4)(2-pzc)(4)(H(2)O)(8)(Mo(8)O(26)).2H(2)O and Cu(3)(2-pzc)(4)(H(2)O)(2)(V(10)O(28)H(4)).6.5H(2)O (2-pzc = 2-pyrazinecarboxylate)

Two new copper 2-pyrazinecarboxylate (2-pzc) coordination polymers incorporating [Mo(8)O(26)](4-) and [V(10)O(28)H(4)](2-) anions were synthesized and structurally characterized: Cu(4)(2-pzc)(4))(H(2)O)(8)(Mo(8)O(26)).2H(2)O (1) and Cu(3)(2-pzc)(4)(H(2)O)(2)(V(10)O(28)H(4)).6.5H(2)O (2). Crystal data: 1, monoclinic, space group P2(1)/n, a = 11.1547(5) A, b = 13.4149(6) A, c = 15.9633(7) A, beta = 90.816(1) degrees; 2, triclinic, space group P1, a = 10.5896(10) A, b = 10.7921(10) A, c = 13.5168(13) A, alpha = 104.689(2) degrees, beta = 99.103(2) degrees, gamma = 113.419(2) degrees. Compound 1 contains [Cu(2-pzc)(H(2)O)(2)] chains charge-balanced by [Mo(8)O(26)](4-) anions. In compound 2, layers of [Cu(3)(2-pzc)(4)(H(2)O)(2)] form cavities that are filled with [V(10)O(28)H(4)](2-) anions. The magnetic properties of both compounds are described.     

A novel organic-inorganic hybrid based on an 8-electron-reduced Keggin polymolybdate capped by tetrahedral, trigonal bipyramidal, and octahedral zinc: synthesis and crystal structure of (CH3NH3)(H2bipy)[Zn4(bipy)3(H2O)2MoV8MoVI4O36)(PO4)].4H2O

Hydrothermal reaction of H(3)PO(3), CH(3)NH(2), zinc(II) acetate, 4,4'-bipyridine (bipy), and (NH(4))(6)Mo(7)O(24).4H(2)O at 180 degrees C led to a novel organic-inorganic layered hybrid, [CH(3)NH(3)][H(2)bipy][Zn(4)(bipy)(3)(H(2)O)(2)Mo(V)(8)Mo(VI)O(36)(PO(4))].4H(2)O (1). Its structure was established by single-crystal X-ray diffraction. It crystallizes in the monoclinic space group P2(1)/c with cell parameters of a = 17.3032(2), b = 17.8113(3), and c = 23.4597 (4) A, beta = 106.410(1) degrees, V = 6935.6(2) A(3), and Z = 4. The structure of compound 1 features a novel 2D layer built from the 8e-reduced tetracapped Keggin [Zn(4)Mo(12)O(36)(PO(4))](3)(-) anions, which are further interconnected by bridging bipy ligands. The four zinc(II) ions are in tetrahedral, trigonal bipyramidal, and octahedral coordination geometries, respectively.     

cis-Dihydroxylation and epoxidation of alkenes by [Mn(2)O(RCO(2))(2)(tmtacn)(2)]: tailoring the selectivity of a highly H(2)O(2)-efficient catalyst

The carboxylic acid promoted cis-dihydroxylation and epoxidation of alkenes catalyzed by [MnIV2O3(tmtacn)2]2+ 1 employing H2O2 as oxidant is described. The use of carboxylic acids at cocatalytic levels not only is effective in suppressing the inherent catalase activity of 1, but also enables the tuning of the catalyst's selectivity. Spectroscopic studies and X-ray analysis confirm that the control arises from the in situ formation of carboxylate-bridged dinuclear complexes, for example, 2 {[MnIII2O(CCl3CO2)2(tmtacn)2]2+} and 3 {[MnII2(OH)(CCl3CO2)2(tmtacn)2]+}, during catalysis. For the first time, the possibility to tune, through the carboxylate ligands employed, both the selectivity and activity of dinuclear Mn-based catalysts is demonstrated. To our knowledge, the system 1/2,6-dichlorobenzoic acid (up to 2000 turnover numbers for cis-cyclooctanediol) is the most active Os-free cis-dihydroxylation catalyst reported to date.     

On the electronic structure of giant polyoxometalates: Mo(132)vs. W(72)Mo(60)

The molecular and electronic structure of the spherical Keplerates [{(Mo(VI))Mo(VI)(5)O(21)}(12)(Mo(V)(2)O(4))(30)](12-) (Mo(132)) and [{(W(VI))W(VI)(5)O(21)}(12)(Mo(V)(2)O(4))(30)](12-) (W(72)Mo(60)) has been determined, for the first time, using first-principles density functional theory (DFT) based methods including solvent effects. Computed geometric parameters are in very good agreement with X-ray data, whereas the electronic structure reveals the archetypal nature of polyoxometalates.     

Polyoxometalate (W/Mo) compounds connected via lanthanide cations with a three-dimensional framework, H2{[K(H2O)2]2[Ln(H2O)5]2(H2M12O42)}.nH2O: synthesis, structures, and magnetic properties

A series of 10 novel polyoxometalate (W/Mo) compounds connected via a trivalent lanthanide cation bridge, H2{[K(H2O)2]2[Ln(H2O)5]2(H2M12O42)}.n(H2O) (Ln = La, Sm, Eu, Gd, Tb, Dy, Ho, Er, Yb, Lu; M = W or W/Mo) (1-10), were designed and synthesized on the basis of the abduction of Al3+ in aqueous solution. X-ray diffraction analyses reveal that the structures of complexes 1-10 are three-dimensional frameworks assembled from the arrangement of H2M12O42(10-) (named paradodecmetalate-B) and Ln(H2O)53+ with two planes, which are constructed via the unification of H2M12O42(10-) and Ln(H2O)53+, along the [100] and [001] directions. Magnetic measurements reveal the paramagnetic properties and a strong ferromagnetic coupling between the two nearest-neighboring lanthanide cations, Ln3+ (Ln = Dy, Er), within the circle for compounds 2 and 4-9.     

Reactions of [Ru(H(2)O)(6)](2+) with water-soluble tertiary phosphines

In aqueous solutions under mild conditions, [Ru(H(2)O)(6)](2+) was reacted with various water-soluble tertiary phosphines. As determined by multinuclear NMR spectroscopy, reactions with the sulfonated arylphosphines L =mtppms, ptppms and mtppts yielded only the mono- and bisphosphine complexes, [Ru(H(2)O)(5)L](2+), cis-[Ru(H(2)O)(4)L(2)](2+), and trans-[Ru(H(2)O)(4)L(2)](2+) even in a high ligand excess. With the small aliphatic phosphine L = 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1(3,7)]decane (pta) at [L]:[Ru]= 12:1, the tris- and tetrakisphosphino species, [Ru(H(2)O)(3)(pta)(3)](2+), [Ru(H(2)O)(2)(pta)(4)](2+), [Ru(H(2)O)(OH)(pta)(4)](+), and [Ru(OH)(2)(pta)(4)] were also detected, albeit in minor quantities. These results have significance for the in situ preparation of Ru(II)-tertiary phosphine catalysts. The structures of the complexes trans-[Ru(H(2)O)(4)(ptaMe)(2)](tos)(4)x2H(2)O, trans-[Ru(H(2)O)(4)(ptaH)(2)](tos)(4)[middle dot]2H(2)O, and trans-mer-[RuI(2)(H(2)O)(ptaMe)(3)]I(3)x2H(2)O, containing protonated or methylated pta ligands (ptaH and ptaMe, respectively) were determined by single crystal X-ray diffraction.     

Dititanium-containing 19-tungstodiarsenate(III) [Ti2(OH)2As2W19O67(H2O)]8-: synthesis, structure, electrochemistry, and oxidation catalysis

The dititanium-containing 19-tungstodiarsenate(III) [Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)](8-) (1) has been synthesized and characterized by IR, TGA, elemental analysis, electrochemistry, and catalytic studies. Single-crystal X-ray analysis was carried out on Cs(8)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)].2CsCl.12H(2)O (Cs-1), which crystallizes in the monoclinic system, space group P2(1)/m, with a=12.7764(19), b=19.425(3), c=18.149(3) A, beta=110.234(3) degrees, and Z=2. Polyanion 1 comprises two (B-alpha-As(III)W(9)O(33)) Keggin moieties linked through an octahedral {WO(5)(H(2)O)} fragment and two unprecedented square-pyramidal {TiO(4)(OH)} groups, leading to a sandwich-type structure with nominal C(2v) symmetry. Synthesis of 1 was accomplished by reaction of TiOSO(4) and K(14)[As(2)W(19)O(67)(H(2)O)] in a 2:1 molar ratio in aqueous, acidic medium (pH 2). Polyanion 1 could also be isolated as a tetra-n-butyl ammonium (TBA) salt, {(n-C(4)H(9))(4)N}(5)H(3)[Ti(2)(OH)(2)As(2)W(19)O(67)(H(2)O)] (TBA-1). TBA-1 was studied by cyclic voltammetry in acetonitrile (MeCN) solutions containing 0.1 M LiClO(4) and compared with the results obtained with Cs-1 in aqueous media. In MeCN, the Ti(IV) and W(VI) waves could not be separated distinctly. An important adsorption phenomenon on the glassy carbon working electrode was encountered both in cyclic voltammetry and in controlled potential electrolysis and was confirmed by Electrochemical Quartz Crystal Microbalance (EQCM) studies on a carbon film. TBA-1, dissolved in MeCN, reacts with H(2)O(2) to give peroxo complexes stable enough for characterization by UV-visible spectroscopy, cyclic voltammetry, and EQCM. TBA-1 shows high catalytic activity (TOF=11.3 h(-1)) in cyclohexene oxidation with aqueous H(2)O(2) producing products typical of a heterolytic oxidation mechanism. The stability of TBA-1 under turnover conditions was confirmed by using IR, UV-visible spectroscopy as well as cyclic voltammetry.