Performance of dye-sensitized solar cells based on various sensitizers applied on TiO2-Nb2O5 core/shell photoanode structure

The present investigation described the performance of dye-sensitized solar cells (DSSCs) based on various sensitizers applied on TiO₂-Nb₂O₅ core/shell photoanode film. The novel photoanodes were prepared using composite of TiO₂ nanoparticles (TNPs) and TiO₂ nanorods (TNRs) as core (TNPRs) layer with Nb₂O₅ shell coating. As well, tantalum pentoxide (Ta₂O₅), a blocking layer applied over the core/shell film. The DSSCs were fabricated based on various sensitizers namely zinc phthalocyanine, indoline, indigo carmine, zinc porphyrin, N719, coumarin NKX-2700, polymer dye, quantum dots (QDs), perylene and squaraine. The I–V characteristics of the DSSCs, photocurrent density (Jsc), open-circuit voltage (Voc), fill factor (FF), and photoconversion efficiency (PCE) were determined under illumination of AM 1.5 G. Electrochemical impedance spectroscopy (EIS) analysis is carried out to study the charge transport and life-time of charge carriers at photoanode/dye/electrolyte interface of the DSSCs. The I–V and EIS results explicated that the core/shell with blocking layers were able to alleviate the electron transport and suppressed charge recombination at photoanode/dye/electrolyte interface of the DSSCs. Concerning the sensitizers, PCE of the DSSCs exemplify the order N719 > zinc porphyrin > coumarin NKX-2700 > indoline > squaraine > QDs > zinc phthalocyanine > perylene > polymer dye > indigo carmine dye. The results of the present work demonstrated that among the sensitizers studied, N719 showed the highest PCE and fill factor. Besides, the metal-free organic sensitizers (coumarin NKX-2700 and indoline) exhibited comparable PCE as compared to N719.     

Effect of TiCl4‐based TiO2 compact and blocking layers on efficiency of dye‐sensitized solar cells

The effect of the number and arrangement of TiO₂‐based photoanode layers on the efficiency of dye‐sensitized solar cells (DSSCs) was investigated. Compact, mesoporous, and blocking layers of TiO₂ were prepared to form monolayer, bilayer, and trilayer photoanodes. Compact and blocking TiO₂ layers were prepared using dip‐coating technique, whereas the doctor‐blade method was employed to prepare TiO₂ paste layers using nanoparticles prepared by the sol–gel method. The crystalline structure of photoanodes was characterized by X‐ray diffraction (XRD) measurements and their morphology and thickness were characterized by the scanning electron microscopy (SEM) technique. The photovoltaic performance of constructed DSSC devices was investigated and the optimum arrangement was identified and explained in terms of dye loading enhancement and recombination reduction at the fluorine‐doped tin oxide (FTO)/electrolyte interface.     

Hydrothermal Synthesis of a Crystalline Rutile TiO2 Nanorod Based Network for Efficient Dye‐Sensitized Solar Cells

One‐dimensional (1D) TiO₂ nanostructures are desirable as photoanodes in dye‐sensitized solar cells (DSSCs) due to their superior electron‐transport capability. However, making use of the DSSC performance of 1D rutile TiO₂ photoanodes remains challenging, mainly due to the small surface area and consequently low dye loading. Herein, a new type of photoanode with a three‐dimensional (3D) rutile‐nanorod‐based network structure directly grown on fluorine‐doped tin oxide (FTO) substrates was developed by using a facile two‐step hydrothermal process. The resultant photoanode possesses oriented rutile nanorod arrays for fast electron transport as the bottom layer and radially packed rutile head‐caps with an improved large surface area for efficient dye adsorption. The diffuse reflectance spectra showed that with the radially packed top layer, the light‐harvesting efficiency was increased due to an enhanced light‐scattering effect. A combination of electrochemical impedance spectroscopy (EIS), dark current, and open‐circuit voltage decay (OCVD) analyses confirmed that the electron‐recombiantion rate was reduced on formation of the nanorod‐based 3D network for fast electron transport. As a resut, a light‐to‐electricity conversion efficiency of 6.31 % was achieved with this photoanode in DSSCs, which is comparable to the best DSSC efficiencies that have been reported to date for 1D rutile TiO₂.     

双层结构CeO2光阳极在染料敏化太阳能电池中的应用

利用水热法合成核壳结构Au@SiO₂@CeO₂纳米微球,制备了一系列双层结构复合光阳极并应用于染料敏化太阳能电池(DSSC)。研究表明：当CeO₂纳米微球和核壳结构Au@SiO₂@CeO₂纳米微球应用于DSSC光阳极散射层时,电池的光电转化效率有了显著提高。相对于纯TiO₂(P25)光阳极,P25/CeO₂纳米球光阳极电池的DSSC光电性能提高了15.3%,P25/Au@SiO₂@CeO₂纳米球光阳极电池的光电性能提高了27.9%。DSSC光电性能的提高主要归因于2个方面：一方面,Au纳米粒子的表面等离子体共振效应有效提高了光阳极薄膜的光散射效应。另一方面,CeO₂具有较高的染料负载能力,核壳球形结构具有较高的比表面积,增强了光的散射效应,提高了电子传输能力。     

双层结构CeO2光阳极在染料敏化太阳能电池中的应用

利用水热法合成核壳结构Au@SiO₂@CeO₂纳米微球,制备了一系列双层结构复合光阳极并应用于染料敏化太阳能电池(DSSC)。研究表明：当CeO₂纳米微球和核壳结构Au@SiO₂@CeO₂纳米微球应用于DSSC光阳极散射层时,电池的光电转化效率有了显著提高。相对于纯 TiO₂ (P25)光阳极,P25/CeO₂纳米球光阳极电池的 DSSC 光电性能提高了 15.3%,P25/Au@SiO₂@CeO₂纳米球光阳极电池的光电性能提高了27.9%。DSSC光电性能的提高主要归因于2个方面：一方面,Au纳米粒子的表面等离子体共振效应有效提高了光阳极薄膜的光散射效应。另一方面,CeO₂具有较高的染料负载能力,核壳球形结构具有较高的比表面积,增强了光的散射效应,提高了电子传输能力。     

Improved efficiency of dye-sensitized solar cells by design of a proper double layer photoanode electrodes composed of Cr-doped TiO2 transparent and light scattering layers

A new strategy for enhancing the efficiency of TiO₂ dye-sensitized solar cells (DSSCs) by design of a new double layer film doped with Cr ions, with various morphologies, is reported. X-ray diffraction and field emission scanning electron microscope (FE-SEM) analyses revealed that the synthesized nanoparticles had uniform and nanometer grains with different phase compositions and average crystallite size in the range of 10–12 nm depending upon Cr atomic percentage. UV–vis absorption showed that Cr introduction enhanced the visible light absorption of TiO₂ nanoparticles by shifting the absorption onset to visible light region. Furthermore, the band gap energy of nanoparticles decreased with an increase in dopant concentration due to reduction of particle size. It was found that, 3 at.% Cr-doped TiO₂ DSSC in the form of a double-layer film composed of TiO₂ nanoparticles, as the under-layer, and mixtures of nano- and micro-particles with weight ratio of 80:20, as the over-layer, (i.e., CT3/NM3 solar cell) had the highest power conversion efficiency of 7.02 %, short current density of 17.32 mA/cm² and open circuit voltage of 674 mV. This can be related to achievement of a balance among the electron injection, light scattering effect and dye sensitization parameters. Optimization of light scattering effect of photoanode electrode led to improve the photovoltaic performance of CT3/NM3 double-layer solar cell and was demonstrated by diffuse reflectance spectroscopy. The presented strategy would open up new insight into fabrication of low-cost TiO₂ DSSCs with high power conversion efficiency.     

基于TiO2纳米管阵列的高效正面透光型染料敏化太阳能电池的制备及其光电性能

报道了一种基于TiO2纳米管(TNT)阵列正面透光型光阳极的高效染料敏化太阳能电池.将TNTs在450°C烧结后能避免其有序结构在HF处理过程中被破坏,使膜内高速电子传输通道被保留,有利于染料敏化太阳能电池(DSSC)实现高速电荷传输.再用HF、TiCl4、HF和TiCl4混合等溶剂对TNTs进行处理,提高其表面粗糙度以吸附更多染料.染料吸附量的增加能提高光阳极在300-570 nm波段光子捕获效率,该波段是染料吸收光子的主要区域.然而,在染料吸收光子较弱的长波段区域(570-800 nm)光子捕获效率的增加主要源于光阳极光散射率的提高.光阳极光子捕获效率的提高使DSSC的内外量子效率在全波段(300-800 nm)均有所增加,从而使短路电流明显提高.从电化学阻抗数据可知,与电子传输性能密切相关的电化学参数如电荷传输电阻、界面电荷复合电阻、电容、电子寿命、电子扩散长度和电子收集效率等在含处理过的TNTs光阳极DSSC中均有所改善,从而提高电池光电转换效率.含HF和TiCl4混合溶剂处理TNTs光阳极的DSSC最高光电转换效率能达到7.30%,比未处理的DSSC(5.38%)提高35.69%.     

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

Tin chloride perovskite-sensitized core/shell photoanode solar cell with spiro-MeOTAD hole transport material for enhanced solar light harvesting

An attempt has been made to fabricate methyl ammonium tin chloride (CH₃NH₃SnCl₃) perovskite-sensitized TiO₂ nanostructure photoanode solar cell with hole transport material (HTM) spiro-MeOTAD and graphite-coated counter electrode (CE). The TiO₂ nanoparticles (TNPs), TiO₂ nanoleaves (TNLs), and TNLs with MgO core/shell photoanodes were prepared to fabricate perovskite-sensitized solar cells (PSSCs). The prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The photovoltaic characteristics of the PSSCs, photocurrent density (J _sc), open-circuit voltage (V _oc), fill factor (FF), and power conversion efficiency (PCE) were determined under illumination of AM 1.5 G. Electrochemical impedance spectroscopy (EIS) analysis was carried out to study the charge transport and lifetime of charge carriers at the photoanode–sensitizer–electrolyte interface of the PSSCs. The PSSC made with CH₃NH₃SnCl₃ perovskite-sensitized TNL–MgO core/shell photoanode and spiro-MeOTAD HTM shows an impressive photovoltaic performance, with J _sc = 17.24 mA/cm², V _oc = 800 mV, FF = 73 %, and PCE = 9.98 % under 100 mW/cm² light intensity. The advent of such simple solution-processed mesoscopic heterojunction solar cells paves the way to realize low-cost and high-efficiency solar cells. By the aid of electrochemical impedance spectroscopy, it is revealed that the core/shell structure can increase an interfacial resistance of the photoanode–CH₃NH₃SnCl₃ interface and retard an electron recombination process in the photoanode–sensitizer–HTM interface.     

二氧化钛纳米晶溶胶内渗透电极对染料敏化太阳能电池的光伏性能的提高

以自制的过氧钛酸(PTA)水溶液为前驱体,用水热法制备了透明锐钛矿相二氧化钛溶胶.无需有机添加剂可得到直径小于7 nm的棒状二氧化钛纳米晶溶胶.通过将溶胶内渗透到染料敏化太阳能电池(DSSCs)的多孔二氧化钛电极后,消除了多孔电极内的大孔并改善了电极内纳米晶之间的连通性.用扫描电子显微镜(SEM)和光学轮廓仪对溶胶内渗透后的光阳极进行了表征.结果表明:小颗粒棒状二氧化钛纳米晶附着在多孔的二氧化钛表面,填充了电极由于烧结产生的大孔,并在多孔的二氧化钛内部形成了有利于电子传输的网络结构.与未经处理的多孔电极相比,改性后的光阳极组装成染料敏化太阳能电池后光电转化效率提高了64%.     

Effect of titanium isopropoxide addition in low-temperature cured TiO2 photoanode for a flexible DSSC

In this study, titanium isopropoxide (TIPP) was employed as a binder for low-temperature processed photoanode of a flexible dye sensitized solar cell. The coating paste for dip-coating method was prepared comprising commercially available TiO₂ nanoparticles, TIPP and small amount of water. Effect of binder addition was compared at three different TIPP to TiO₂ nanoparticle molar ratios; 0.05, 0.1 and 0.3. By adding TIPP molecules directly to the coating paste, flexible photoanodes were successfully prepared. An optimum TIPP to TiO₂ particle ratio was selected considering the particle dispersion stability in the paste and the microstructure of prepared photoanode. The photoanode prepared using the paste with optimized composition showed highest photoconversion efficiency of 1.96 % from a unit cell.     

Synthesis of TiO<Subscript>2</Subscript> nanotubes using different alkaline media and their applications in photocatalysis and DSSCs

TiO₂ nanotubes (TNTs) were successfully synthesized from different alkaline media (i.e., NaOH and KOH) by using a microwave hydrothermal process. The effects of different alkaline media on the formation of TiO₂ nanotubes and their physicochemical properties were investigated. The phases of different TiO₂ nanostructures were studied by using X-ray diffraction patterns. Morphologies of the nanostructures were observed with a transmission electron microscope. The optical properties of the nanostructures were evaluated through the absorption behavior using UV–Vis diffuse reflectance spectroscopy. The photocatalytic activities of the TiO₂ nanostructures were evaluated by the degradation of methylene blue aqueous dye solution under the simulated solar light irradiation. Similarly, the photovoltaic efficiencies of the prepared samples were investigated by making photo-anode layers in the Dye Sensitized Solar Cells (DSSCs). The results revealed that in comparison to the single layered TiO₂ nanostructures in the DSSC, creation of a double layer structure significantly enhanced the efficiency of DSSC.     

Enhancement of the efficiency of dye-sensitized solar cell with multi-wall carbon nanotubes/polythiophene composite counter electrodes prepared by electrodeposition

For the purpose of increasing the energy conversion efficiency of dye-sensitized solar cells (DSSCs), multi-wall carbon nanotube (MWCNT)/polythiophene (PTh) composite film counter electrode has been fabricated by electrophoresis and cyclic voltammetry (CV) in sequence. The morphology and chemical structure have been characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), and Raman spectroscopy respectively. The overall energy conversion efficiency of the DSSC employing the MWCNT/PTh composite film has reached 4.72%, which is close to that of the DSSC with a platinum (Pt) counter electrode (5.68%). Compared with a standard DSSC with MWCNT counter electrode whose efficiency is 2.68%, the energy conversion efficiency has been increased by 76.12% for the DSSC with MWCNT/PTh counter electrode. These results indicate that the composite film with high conductivity, high active surface area, and good catalytic properties for I₃⁻ reduction can potentially be used as the counter electrode in a high-performance DSSC.     

Growth of aligned polypyrrole acicular nanorods and their application as Pt‐free semitransparent counter electrode in dye‐sensitized solar cell

Polypyrrole films on fluorine doped tin oxide (FTO)‐coated glass substrate were prepared in situ by placing FTO/glass substrates where pyrrole was polymerized by methyl orange‐ferric chloride complex. The atomic force microscopy image indicated growth of acicular nanorods of polypyrrole. These films exhibited catalytic activity towards I₃⁻/I⁻ redox couple and have been investigated for counter electrode application in dye‐sensitized solar cell (DSSC). The fabricated DSSC with N719 dye/TiO₂ as photoanode, and PPy/FTO as counter electrode shows ~1.7% efficiency.     

Development of dye-sensitized solar cells based on visible-light-responsive TiO2 thin films with a unique columnar structure

A visible-light-responsive TiO₂ thin film (Vis-TiO₂), possessing a unique columnar structure oriented perpendicular to the substrate, has been prepared by using a radio-frequency magnetron sputtering deposition method. The unique TiO₂ thin film was used as a key component of N719 dye-sensitized solar cells (DSSCs). The rough morphology caused by the columnar structure leads to enhanced photovoltaic performances of these DSSCs as a consequence of increased amounts of adsorbed dyes and facilitated diffusion of the electrolyte into Vis-TiO₂ film. Additionally, photovoltaic performances of the DSSCs were found to depend strongly on the thickness of the Vis-TiO₂ film, which can be readily controlled by adjusting the sputtering time conducted for deposition. Consequently, a solar-to-electric energy conversion efficiency of 2.6 % under AM 1.5 illumination was observed for an optimally performing DSSC that has a Vis-TiO₂ film thickness of 6.9 μm, prepared by employing a sputtering time of 700 min.     

Structurally Stabilized Organosilane‐Templated Thermostable Mesoporous Titania

Structurally thermostable mesoporous anatase TiO₂ (m‐TiO₂) nanoparticles, uniquely decorated with atomically dispersed SiO₂, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores‐directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high‐angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X‐ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high‐temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye‐sensitized solar cells (DSSCs) with bilayer TiO₂ electrodes, which are prepared by applying a coating of m‐TiO₂ onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25–m‐TiO₂ DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO₂ electrode are greatly improved. The large increase in photocurrent current (ca. 56 %) in the P25–m‐TiO₂ DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60 %) of the device, compared to DSSCs with a monolayer of P25 as the electrode.     

Extensive enhancement in power conversion efficiency of dye-sensitized solar cell by using Al-doped TiO<Subscript>2</Subscript> photoanode

In this work, we have prepared Al-doped TiO₂ nanoparticles via a hydrothermal method and used it for making photoanode in dye-sensitized solar cell (DSSC). Material characterizations were done using XRD, AFM, SEM, TEM and EDAX. XPS results reveal that Al is introduced successfully into the structure of TiO₂ creating new impurity energy levels in the forbidden gap. This resulted in tuning of the conduction band of TiO₂ and reduced charge recombination which led to better current conversion efficiency of DSSC. Greater dye loading and enhanced surface area was obtained for Al-doped TiO₂ compared to un-doped TiO₂. I-V analysis, EIS and Bode plots are employed to evaluate photovoltaic performance. The short-circuit current density (J _sc) and efficiency (η) of cell employing Al-doped TiO₂ photoanode were extensively enhanced compared to the cell using un-doped TiO₂. The optical band gap (E _g) for Al-doped and un-doped TiO₂ was obtained as 2.8 and 3.2 eV, respectively. J _sc and η were 13.39 mAcm^?2 and 4.27%, respectively, under illumination of 100 mWcm^?2 light intensity when thin films of 1% Al-doped TiO₂ was employed as photoanode in DSSC using N719 as the sensitizer dye. With the use of un-doped TiO₂ as photoanode under similar conditions, J _sc 5.12 mAcm^?2 and η 1.06% only could be obtained. The maximum IPCE% obtained with Al-doped TiO₂ and un-doped TiO₂ was 67 and 38% respectively at the characteristic wavelength of dye (λ _max = 540 nm). The EIS analyses revealed resistive and capacitive elements that provided an insight into various interfacial processes in terms of the charge transport. It was observed that Al-doping reduced the interfacial resistance leading to better charge transport which has improved both photocurrent density and conversion efficiency. Higher electron mobility and fast diffusion resulting in greater charge collection efficiency was obtained for Al-doped TiO₂ compared to the un-doped TiO₂. Using the Mott–Schottky plot, the donor density was calculated for un-doped and Al-doped TiO₂. The work demonstrated that the Al-doped TiO₂ is potential photoanode material for low-cost and high-efficiency DSSC.     

Highly ordered anodized Nb2O5 nanochannels for dye-sensitized solar cells

Highly ordered anodized Nb₂O₅ nanochannels are synthesized and utilized as the photoanodes for dye-sensitized solar cells (DSSCs). We characterize these DSSCs to determine the optimum photoanode thickness for the best cell performance. The samples with thicknesses from 5 to 25 μm are obtained in glycerol based electrolyte at 180 °C and their photoconversion properties are investigated utilizing various techniques including photocurrent–voltage characteristic, photovoltage decay and electrochemical impedance spectroscopy. Overall, the DSSC incorporating a 10 μm thick Nb₂O₅ photoanode shows the highest efficiency of 4.48%. We analyze the factors that limit the efficiency of DSSCs.     

Enhancing Electron Collection Efficiency and Effective Diffusion Length in Dye‐Sensitized Solar Cells

Intensity‐modulated photocurrent spectroscopy and intensity‐modulated photovoltage spectroscopy are employed to measure the dynamics of electron transport and recombination in the ZnO nanowire (NW) array‐ZnO/layered basic zinc acetate (LBZA) nanoparticle (NP) composite dye‐sensitized solar cells (DSSCs). The roles of the vertical ZnO NWs and insulating LBZA in the electron collection and transport in DSSCs are investigated by comparing the results to those in the TiO₂–NP, horizontal TiO₂–NW and vertical ZnO–NW‐array DSSCs. The electron transport rate and electron lifetime in the ZnO NW/NP composite DSSC are superior to those in the conventional TiO₂–NP cell due to the existence of the vertical ZnO NWs and insulating LBZA. It indicates that the ZnO NW/NP composite anode is able to sustain efficient electron collection over much greater thickness than the TiO₂–NP cell does. Consequently, a larger effective electron diffusion length is available in the ZnO composite DSSC.     

Rapid Synthesis of Mesoporous TiO2 for the Photoanodes in Dye Sensitized Solar Cells

Mesoporous TiO₂ microspheres with high specific surface areas were synthesized by means of a facile one‐step microwave hydrothermal process without using any template. The mesoporous materials were rapidly achieved using TiCl₄, urea and ammonium sulphate at comparatively low microwave power (400 W) for 8 min irradiation. The morphology and microstructure of the as‐prepared products were characterized by field emission scanning electron microscopy (FESEM), X‐ray diffraction (XRD), transmission electron microscopy (TEM) and Brunauer‐Emmett‐Teller (BET) surface area analysis. Structural characterization indicates that the TiO₂ microspheres display mesoporous structure. The average pore sizes and BET surface areas of the spheres were 5.3 nm and 222 m²g^?1, respectively. The mesoporous nanocrystals synthesized at 160 °C for 8 min were then used to prepare the photoanode for dye sensitized solar cells (DSSCs). A high power conversion efficiency of 5.72% was achieved from the mesoporous TiO₂ based photoanode, representing about 25.7% improvement over the efficiency of P25 photoanode.