等离子体处理制备对甲烷重整Ni基催化剂抗积炭性能的改进

对于甲烷重整反应,Ni基催化剂具有与贵金属催化剂相当的活性,但其易于积炭失活.本文总结了辉光放电等离子体处理制备CO2甲烷重整Ni催化剂以提高催化剂抗积炭性能的研究进展.比较表明,辉光放电等离子体处理制备的Ni催化剂,Ni颗粒较小,分散性更好,密集平面增加,且Ni活性组分与载体相互作用加强.这些变化导致Ni催化剂抗积炭性能改善.     

Ni-Co、Ni-Cu双金属合金催化剂用于CO甲烷化

以钙钛矿型复合氧化物LaNi_(0.9)Co_(0.1)O_3和LaNi_(0.9)Cu_(0.1)O_3为前驱体制备了Ni-Co/La_2O_3和Ni-Cu/La_2O_3双金属合金催化剂。结果表明,双金属合金催化剂中,各组分间相互稀释,具有较强的抗烧结性能;催化剂表面的积炭主要取决于CO在催化剂表面的吸附形态,Ni-Co双金属催化剂中,Co掺杂改变了CO在催化剂表面的吸附形式和吸附强度,使得Ni-Co双金属催化剂具有较强的抗积炭性能。Ni-Co双金属合金催化剂用于CO甲烷化反应时,显现出较好的活性、选择性和稳定性。     

甲烷催化二氧化碳重整制合成气反应研究进展*

本文参阅了甲烷催化二氧化碳重整制合成气反应研究方面50 余篇文献, 概述了近年来在该研究中催化剂活性组分选择、载体效应、助剂的作用、催化剂积炭行为和重整反应机理等方面的研究进展。     

Ni取代六铝酸镧催化剂LaNiAl_(11)O_(19)表面积炭研究

通过 TEM、XPS、TGA、TPR-CO2 技术 ,对在 Ni取代六铝酸镧催化剂 La Ni Al1 1 O1 9表面上的甲烷裂解积炭、甲烷二氧化碳重整积炭及二氧化碳的消炭行为进行了研究 ,以探索该催化剂表面积炭形貌、来源、积炭物种以及积炭活性 .结果表明 ,甲烷具有相当高的裂解积炭活性 ,裂解后生成炭化物 ( carbide炭 )和石墨炭两种不同活性的炭种 ;二氧化碳的解离活性则相对较低 ,但其消除催化剂表面积炭活性却相当高     

羟基磷灰石负载Ni催化剂中Ni含量对催化甲烷二氧化碳重整制合成气性能的影响

以低温沉淀方法制备的羟基磷灰石(HAp)为载体,采用浸渍法制备了一系列不同Ni含量的Ni/HAp催化剂,并采用BET、H2-TPR、XRD、SEM、FT-IR、TEM和TG-DTA技术对催化剂进行了表征。结果表明,NiO含量为13%的催化剂表现出最好的催化甲烷二氧化碳重整制合成气活性,在850℃、空速3.6×104mL/(h·gcat)的反应条件下,甲烷和二氧化碳的转化率在10 h内分别稳定在72%和83%。这主要归因于催化剂中金属和载体之间的强相互作用。虽然反应后的催化剂表面有少量的积炭,但这些积炭多以丝状炭存在,并不会影响催化剂的活性和稳定性。     

甲烷干气重整反应进展(英文)

系统地回顾和总结了二氧化碳重整反应的研究进展和现状,包括催化剂活性组分、载体、助剂以及催化剂制各方法等因素对催化剂性能的影响,同时对催化剂活性组分与反应中间体的结构与性能、反应机理和动力学行为及催化剂失活特性进行了细致的分析。大量研究表明金属镍是最富潜力的干气重整催化剂活性组分,而催化剂积炭是决定该反应能否工业化的关键因素。探索抑制催化剂积碳失活的有效途径是二氧化碳重整过程开发成功的关键。甲烷二氧化碳（干气）重整反应的研究和开发将提供一条天然气有效利用与温室气体减排的有效途径。     

Ni基六铝酸镧LaNiAl11O19催化剂表面甲烷CO2的重整积炭速率

甲烷二氧化碳重整制合成气反应过程中,催化剂表面积炭是制约催化反应顺利进行的关键因素。研究催化剂表面积炭物种及积炭速率,找出影响催化剂表面积炭的动力学因素,对建立合理的催化重整反应体系,完善催化剂表面积炭的动力学理论具有重要的理论和实际意义。目前有关催化剂表面积炭速率的研究报道较少[1,2]。Ｎｉ基六铝酸盐催化剂对甲烷二氧化碳重整制合成气具有很好的催化活性和稳定性[3,4]。本文利用Ｘ 射线光电子能谱(ＸＰＳ)和热重分析(ＴＧＡ)技术,在还原态Ｎｉ基六铝酸镧ＬａＮｉＡｌ11Ｏ19催化剂表面研究了甲烷裂解积炭和甲烷二氧…     

用不同前驱体制备的Co/SiO2催化剂的结构及其CO2/CH4重整反应性能

 分别采用硝酸钴、醋酸钴、硫酸钴和氯化钴为前驱体制备了Co／SiO2催化剂,用XRD,TPR,SEM和H2－TPD等实验技术考察了钴盐前驱体对催化剂结构和二氧化碳重整甲烷反应性能的影响,重点考察了硝酸钴和醋酸钴的作用．结果表明,由醋酸钴制备的Co／SiO2催化剂有最佳的催化活性和稳定性,它在钴物种的存在状态、金属－载体相互作用、钴金属晶粒度及抗烧结、抗积炭能力等方面,均与由硝酸钴制备的Co／SiO2催化剂存在显著的差别．Co／SiO2催化剂的反应活性和稳定性分别与其金属分散度和抗烧结、抗积炭能力密切相关．     

异丁烷脱氢催化剂的研究

本文对异丁烷脱氢反应制异丁烯过程催化剂体系及其反应机理进行了述评,指出异丁烷脱氢依然是最有潜力的转化途径,但非贵金属高效催化剂的研制是其关键.详细总 结了不同载体和助剂对脱氢反应的影响,尤其是载体和助剂的酸碱性以及载体的孔结构.弱 酸中心有利于异丁烷脱氢反应的发生,较小的孔结构能提高反应的选择性.催化剂的抗积炭 性能研究表明: 载体表面的弱酸位和活性组分在表面的高分散度以及碱性助剂的加入,有 利于提高催化剂的抗积炭性能.对异丁烷的脱氢反应机理的研究进行了阐述.     

氮化SBA-16负载镍基催化剂的制备及其对甲烷二氧化碳重整反应的催化性能

通过软模板法合成了SBA-16分子筛,采用高温氨气氮化的方法使有序介孔硅材料中的氧原子部分被氮原子取代,得到氮化的SBA-16载体(SBA-16-N)。采用满孔浸渍法制备了镍基催化剂,并将制得的Ni/SBA-16和Ni/SBA-16-N催化剂用于甲烷二氧化碳重整反应。通过透射电镜、氮气物理吸附、X射线衍射、X射线光电子能谱和二氧化碳程序升温脱附等手段研究了载体和催化剂的结构,并利用热重分析对反应之后回收催化剂进行了表征。结果表明,高温氮化后的分子筛中掺入了氮元素,增加了载体的碱性,改善了载体对反应气体的吸附活化能力,增强了载体与金属之间的相互作用,从而提高了催化剂的活性和抗积炭性能。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.