Ni基六铝酸镧LaNiAl11O19催化剂表面甲烷CO2的重整积炭速率

甲烷二氧化碳重整制合成气反应过程中,催化剂表面积炭是制约催化反应顺利进行的关键因素。研究催化剂表面积炭物种及积炭速率,找出影响催化剂表面积炭的动力学因素,对建立合理的催化重整反应体系,完善催化剂表面积炭的动力学理论具有重要的理论和实际意义。目前有关催化剂表面积炭速率的研究报道较少[1,2]。Ｎｉ基六铝酸盐催化剂对甲烷二氧化碳重整制合成气具有很好的催化活性和稳定性[3,4]。本文利用Ｘ 射线光电子能谱(ＸＰＳ)和热重分析(ＴＧＡ)技术,在还原态Ｎｉ基六铝酸镧ＬａＮｉＡｌ11Ｏ19催化剂表面研究了甲烷裂解积炭和甲烷二氧…     

低Ni含量和低比表面积六铝酸盐LaNiAl_(11)O_(19-δ)催化剂上CH_4-CO_2重整反应的积炭

利用X射线粉末衍射、氢程序升温还原、X射线光电子能谱和透射电镜技术研究了在低Ni含量和低比表面积六铝酸盐催化剂LaNiAl_(11)O_(19-δ)上CH_4-CO_2重整反应的积炭行为,考察了该催化剂表面积炭的形貌、来源、积炭物种及其反应性能.结果表明,LaNiAl_(11)O_(19-δ)催化剂表面积炭主要由甲烷裂解产生,并以Ni的碳化物形式存在于活性中心Ni的周围.根据积炭物种活化程度的难易可分为C_α,C_β和C_γ三种类型,其中C_α为容易被CO_2消除的化合碳,而C_β和C_γ则是不易被CO_2消除的石墨碳.透射电镜结果表明,C_α以碳纳米管形式分布于催化剂颗粒周围,但金属Ni活性中心仍能暴露于气相中,因而不影响催化剂的活性.     

CH_4、CO_2与O_2制合成气催化剂研究 VI.催化剂表面积炭种类和积炭动力学研究

利用XPS考察了甲烷、二氧化碳和氧气制合成气反应前后Ni/γ-Al2O3和Ni-Ce-Mn-Li/γ-Al2O3催化剂表面炭物种.发现反应后Ni/γ-Al2O3催化剂表面积炭有四种类型-表面碳酸盐、污染炭、金属炭化物和非活性炭,而高活性和稳定性Ni-Ce-Mn-Li/γ-Al2O3催化剂表面积炭仅有两种类型——污染炭和金属炭化物.非活性炭是导致催化剂失活的主要原因之一.积炭动力学研究表明:Ni-Ce-Mn-Li/γ-Al2O3催化剂上积炭反应的动力学方程为:-0.45·PO2-1.80,该催化剂积炭反应的表观活化能较高,从而抑制积炭反应的进行.1.1·PO2r0=A·e-ERT·PCH4     

CH4、CO2与O2制合成气催化剂研究Ⅵ.催化剂表面积炭种类和积炭动力学研究

利用XPS考察了甲烷、二氧化碳和氧气制合成气反应前后Ni/γ-Al2O3和Ni-Ce-Mn-Li/γ-Al2O3催化剂表面炭物种.发现反应后Ni/γ-Al2O3催化剂表面积炭有四种类型-表面碳酸盐、污染炭、金属炭化物和非活性炭,而高活性和稳定性Ni-Ce-Mn-Li/γ-Al 2O3催化剂表面积炭仅有两种类型--污染炭和金属炭化物.非活性炭是导致催化剂失活的主要原因之一.积炭动力学研究表明: Ni-Ce-Mn-Li/γ-Al 2O 3催化剂上积炭反应的动力学方程为: r0=A·e(-E)/(RT)·PCH41.1·PO2-0.45·PO2-1.80,该催化剂积炭反应的表观活化能较高,从而抑制积炭反应的进行.     

CH4、CO2与O2制合成气催化剂研究VI．催化剂表面积炭种类和积炭动力学研究

利用XPS考察了甲烷、二氧化碳和氧气制合成气反应前后Ni/γ-Al2O3和Ni-Ce-Mn-Li/γ-Al2O3催化剂表面炭物种.发现反应后Ni/γ-Al2O3催化剂表面积炭有四种类型-表面碳酸盐、污染炭、金属炭化物和非活性炭,而高活性和稳定性Ni-Ce-Mn-Li/γ-Al 2O3催化剂表面积炭仅有两种类型--污染炭和金属炭化物.非活性炭是导致催化剂失活的主要原因之一.积炭动力学研究表明 Ni-Ce-Mn-Li/γ-Al 2O 3催化剂上积炭反应的动力学方程为 r0=A·e(-E)/(RT)·PCH41.1·PO2-0.45·PO2-1.80,该催化剂积炭反应的表观活化能较高,从而抑制积炭反应的进行.     

低Ni含量和低比表面积六铝酸盐LaNiAl11O19-δ催化剂上CH4-CO2重整反应的积炭

 利用 X 射线粉末衍射、氢程序升温还原、X 射线光电子能谱和透射电镜技术研究了在低 Ni 含量和低比表面积六铝酸盐催化剂 LaNiAl11O19-δ 上 CH4-CO2 重整反应的积炭行为, 考察了该催化剂表面积炭的形貌、来源、积炭物种及其反应性能. 结果表明, LaNiAl11O19-δ 催化剂表面积炭主要由甲烷裂解产生, 并以 Ni 的碳化物形式存在于活性中心 Ni 的周围. 根据积炭物种活化程度的难易可分为 Cα, Cβ和 Cγ 三种类型, 其中 Cα 为容易被 CO2 消除的化合碳, 而 Cβ 和 Cγ则是不易被 CO2 消除的石墨碳. 透射电镜结果表明, Cα 以碳纳米管形式分布于催化剂颗粒周围, 但金属 Ni 活性中心仍能暴露于气相中, 因而不影响催化剂的活性.     

Ba调变复合氧化物LaxBa1-xNiAl11O19-δ催化剂的制备和性能表征

制备了Ba调变Ni基复合氧化物催化剂LaxBa1-xNiAl11O19-δ,并通过XRD、XPS、TPR、TEM、BET和TGA等技术对催化剂的结构、性质和对甲烷二氧化碳重整制合成气反应的催化性能以及催化剂表面积炭情况进行了表征.结果表明,Ba调变后复合氧化物的微观结构随Ba调变量发生规律性变化,但结构的改变对催化剂的理化性质和催化性能均无明显影响,该系列Ni基复合氧化物都具有较好的催化活性以及较高的抗烧结和抗积炭性能,是甲烷二氧化碳重整制合成气反应选择氧化的良好催化剂.     

Ni-Mg复合催化剂催化裂解CH_4制氢动力学研究

基于定温热重实验,建立了甲烷催化裂解反应动力学模型和催化剂表面积炭失活动力学模型。其中,甲烷催化裂解动力学模型将初始产氢速率视为催化剂未积炭条件下的动力学基础数据;催化剂表面积炭失活动力学则基于甲烷催化裂解速率的降低。实验使用Ni-Mg复合催化剂,分别在535、585、635℃,甲烷分压10~4、2×10~4、3×10~4Pa条件下展开甲烷催化裂解动力学特性研究。结果表明,甲烷催化裂解的反应级数为0.5,活化能为82 k J/mol;Ni-Mg复合催化剂反应失活级数为0.5,催化剂失活活化能为118 k J/mol。实验条件下均制得了多壁碳纳米管。     

CeO2和Pd在Ni/γ-Al2O3催化剂中的助剂作用

采用脉冲微反技术研究了添加n型半导体氧化物CeO2及贵金属Pd对Ni/γ Al2O3催化剂上CH4积炭/CO2消炭反应性能的影响,并运用BET、TPR、CO2 TPSR及氢吸附等技术对催化剂进行了表征.结果表明, n型半导体氧化物CeO2的添加可以降低Ni/γ Al2O3催化剂上CH4裂解积炭活性,提高CO2消炭活性,添加少量贵金属Pd可以进一步改变载体Al2O3、助剂CeO2和活性组分Ni之间的相互作用,从而改善Ni/γ Al2O3催化剂的抗积炭性能.通过Ni Ce Pd/γ Al2O3催化剂上CH4积炭/CO2消炭模型对上述作用机制作出了新的解释.     

羟基磷灰石负载Ni催化剂中Ni含量对催化甲烷二氧化碳重整制合成气性能的影响

以低温沉淀方法制备的羟基磷灰石(HAp)为载体,采用浸渍法制备了一系列不同Ni含量的Ni/HAp催化剂,并采用BET、H2-TPR、XRD、SEM、FT-IR、TEM和TG-DTA技术对催化剂进行了表征。结果表明,NiO含量为13%的催化剂表现出最好的催化甲烷二氧化碳重整制合成气活性,在850℃、空速3.6×104mL/(h·gcat)的反应条件下,甲烷和二氧化碳的转化率在10 h内分别稳定在72%和83%。这主要归因于催化剂中金属和载体之间的强相互作用。虽然反应后的催化剂表面有少量的积炭,但这些积炭多以丝状炭存在,并不会影响催化剂的活性和稳定性。     

A 13CO isotopic study on the CO promotion effect in methane dehydroaromatization reaction over a Mo/HMCM-49 catalyst

The promotion effect of CO in methane dehydroaromatization was investigated using 13CO probe molecules. By alternative injection of 13CO to the methane feed,the distribution of 13CxC6-xH6(x=0-3)products changed significantly,confirming the participation of13CO in the reaction network.The addition of 13CO did not change the conversion of CH4 but improved slightly the durability of the methane dehydroaromatization(MDA)reaction,which might be caused by the interaction of the dissociated oxygen species and the ...     

Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

用于甲烷分解和甲烷二氧化炭重整的碳材料催化剂研究进展

The decomposition and CO2 reforming of methane,respectively,are promising alternatives to industrial steam methane reforming. In recent years,research has been focused on the development of catalysts that can operate without getting deactivated by carbon deposition,where,in particular,carbon catalysts have shown positive results. In this work,the role of carbon materials in heterogeneous catalysis is assessed and publications on methane decomposition and CO2 reforming of methane over carbon materials are reviewed. The influence of textural properties(BET surface area and micropore volume,etc.) and oxygen surface groups on the catalytic activity of carbon materials are discussed. In addition,this review examines how activated carbon and carbon black catalysts,which are the most commonly used carbon catalysts,are deactivated. Characteristics of the carbon deposits from methane are discussed and the influence of the reactivity to CO2 of fresh carbon and carbonaceous deposits for high and steady conversion during CO2 reforming of CH4 are also considered.     

Production of Hydrogen from Methane by a CO2 Emission-Suppressed Process: Methane Decomposition and Gasification of Carbon Nanofibers

Catalytic methane decomposition into hydrogen and carbon nanofibers and the oxidations of carbon nanofibers with CO₂, H₂O and O₂ were overviewed. Supported Ni catalysts (Ni/SiO₂, Ni/TiO₂ and Ni/carbon nanofiber) were effective for the methane decomposition. The activity and life of the supported Ni catalysts for methane decomposition strongly depended on the particle size of Ni metal on the catalysts. The modification of the catalysts with Pd enhanced the catalytic activity and life for methane decomposition. In particular, the supported Ni catalysts modified with Pd showed high turnover number of hydrogen formation at temperatures higher than 973 K with a high one-pass methane conversion (>70%). However, sooner or later, every catalyst completely lost their catalytic activities due to the carbon layer formation on active metal surfaces. In order to utilize a large quantity of the carbon nanofibers formed during methane decomposition as a chemical feedstock or a powdered fuel for heat generation, they were oxidized with CO₂, H₂O and O₂ into CO, synthesis gas and CO₂, respectively. In every case, the conversion of carbon was greater than 95%. These oxidations of carbon nanofibers recovered or enhanced the initial activities of the supported Ni catalysts for methane decomposition.     

Formation of CO(x)-free H2 and cup-stacked carbon nanotubes over nano-Ni dispersed single wall carbon nanohorns

Transitional metals (M) were dispersed on single-wall carbon nanohorns (M/SWCNHs, M = Fe, Co, Ni, Cu) by simple thermal treatment of the deposited metal nitrate without H(2) reduction. Nanometallic Ni particles on SWCNH were evidenced by high-resolution transmission electron microscopic observation and X-ray photoelectron spectroscopy. The nano-Ni dispersed on SWCNH showed the highest CH(4) decomposition activity; the activity of used transitional metals decreases in the order Ni ? Co > Fe ? Cu. On the other hand, the reaction rate over Ni/SWCNH was much larger than that over Ni/Al(2)O(3), and the former provided CO(x)-free H(2) and cup-stacked carbon nanotubes, while Ni/Al(2)O(3) produced CO(x) in addition to H(2). SWCNH was superior to Al(2)O(3) as the catalyst support of Ni for the CH(4) decomposition reaction.     

Methane Decomposition over Ni/α-Al2O3 Promoted by La2O3 and CeO2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with differ-ent contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

Methane Decomposition over Ni/α-Al_2O_3 Promoted by La_2O_3 and CeO_2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with different contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

Effect of decomposition of catalyst precursor on Ni/CeO2 activity for CO methanation

CO methanation on Ni/CeO₂ has recently received increasing attention. However, the low-temperature activity and carbon resistance of Ni/CeO₂ still need to be improved. In this study, plasma decomposition of nickel nitrate was performed at ca. 150°C and atmospheric pressure. This was followed by hydrogen reduction at 500 °C in the absence of plasma, and a highly dispersed Ni/CeO₂ catalyst was obtained with improved CO adsorption and enhanced metal-support interaction. The plasma-decomposed catalyst showed significantly improved low-temperature activity with high methane selectivity (up to 100%) and enhanced carbon resistance for CO methanation. For example, at 250°C, the plasma-decomposed catalyst showed a CO conversion of 96.8% with high methane selectivity (almost 100%), whereas the CO conversion was only 14.7% for a thermally decomposed catalyst.     

Study on the Reaction Mechanism for Carbon Dioxide Reforming of Methane over supported Nickel Catalyst

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalyst were extensively investigated by TPSR and TPD experiments. It showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalyst, while CO2 adsorbed on the catalyst weakly and only existed in one kind of adsorption state. Then the mechanism of interaction between the species dissociated from CH4 and CO2 during reforming was proposed.