酸促进的氨基甲酸酯醇解合成碳酸酯

在较低温度和压力下,以氯化氢为共反应物或沸石分子筛为催化剂,由氨基甲酸酯与醇反应合成多种碳酸酯。氯化铵沉淀的生成或沸石分子筛对氨气的吸附,可推动反应平衡,使碳酸酯的生成达到较高收率。以氯化氢为共反应物时,反应温度为60℃,最高产率达58％;而以沸石分子筛为催化剂,反应温度为140℃时,最高产率是19％。     

双氧水氧化环己烯催化合成己二酸研究进展

评述了近年来以环己烯为底物,双氧水为氧源,分别采用钨酸盐、钨酸、杂多酸及杂多酸盐、功能化分子筛和负载离子液体等为催化剂催化合成己二酸的研究进展.     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

聚吡咯的合成与新型双离子电池性能研究

用反相微乳聚合法制备了十二苯磺酸(DBSA)掺杂的导电聚吡咯纳米材料, DBSA既作为表面活性剂又作为掺杂剂, 能够提高聚吡咯的导电性. 用制备出的DBSA-PPy 为正极材料, 石墨为负极材料组装双离子电池, 测试结果表明, C/DBSA-PPy 电池的电化学性能已达到传统锂离子电池的水平, 这是因其具有较高的导电性和特殊掺杂结构的聚吡咯使其电化学性能得到优化.     

Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

Aspects of Electrochemical Behavior of Aldehydes and Ketones in Protic Media

Reduction of carbonyl group in aldehydes and ketones, as well as oxidation of numerous aldehydes is discussed, as well as those reductions of organic compounds where the C?O group activates cleavage of an adjacent C? X bond where X is a good leaving group like halogen, OH, NH₂ or SR or activates hydrogenation of an adjacent C?C group. Survey involves aliphatic and aromatic aldehydes, aryl alkyl and diaryl ketones, as well as α‐ketoacids, 1,2‐diketones and compounds where the carbonyl group is a part of a ring. The role of acid–base, hydration–dehydration and in some cases keto–enol equilibria on electrochemical behavior is pointed out, as well as the role of buffer kind and concentration and the nature of the cation of supporting electrolyte. Better understanding of these factors promises finding of best conditions for electroanalytical procedures.     

Determination of Thermodynamic Parameters from Evaporation of Binary Microdroplets of Volatile Constituents

An experimental technique based on a modified vibrating orifice aerosol generator has been employed to study unsteady evaporation of linear streams of highly monodisperse binary microdroplets of volatile constituents over short time periods (i.e., <1 ms), such that the droplet composition remains nearly constant. The droplet size and temperature (i.e., refractive index) have been determined with high temporal resolution from the resonances observed in the simultaneous elastic and Raman light scattering spectra obtained by varying the droplet size through modulation of droplet generation frequency. By using this technique we show that thermodynamic parameters of binary systems, such as activity coefficients as well as vapor pressures of the constituents as functions of temperature, can be determined. We have applied the procedure to study unsteady evaporation rates of pure ethanol and methanol droplets as well as binary droplets containing various ratios of ethanol and methanol. We have obtained vapor pressures of ethanol and methanol as functions of temperature as well as activity coefficients of ethanol and methanol as functions of composition, and the results show excellent agreements with the values reported in the literature. The technique presented in this paper is applicable to any binary system containing at least one volatile constituent. Copyright 2000 Academic Press.     

HZSM-5上生物质催化裂解的近期研究进展

概述了近期的HZSM-5对生物质和生物油催化裂解的研究进展,重点介绍了催化剂的应用、生物油提质的方法和反应机理.     

不同光敏剂对光敏热成像材料感光性能的影响

本文考察了不同制备方法、不同种类的光敏剂对以苯并三氮唑银为银源的光敏热成像材料感光性能的影响。结果显示原位法中以AgI和AgBrI为光敏剂的PTG材料具有较高的感光度,分别为以AgBr为光敏剂的参比样片感光度的16倍和2.4倍;异位法制备的PTG材料中,以AgBrI乳剂为光敏剂的感光度比以AgBr为光敏剂的感光度高,是其3倍;此外,同是以AgBr为光敏剂、用异位法制备的PTG材料的感光度比原位法制备的PTG材料感光度高。文中初步分析讨论了出现以上实验结果的原因。     

Peculiarities of the Porous Structure of Aluminosilicate Mesoporous Substances Obtained in The Presence of Biotemplates

Supramolecular structures of lecithin occurred to be the template in the synthesis of mesoporous aluminosilicates; using of various combinations of lecithin and cetyltrimethyl-ammonium bromide or octadecylamine as templating agents allowed to obtain mesoporous substances with pores up to 100 Å, as well as biporous materials in aluminosilicate system. In the presence of glucose oxidase and cetyltrimethyl-ammonium bromide combinations aluminosilicate substances with complex porous structure were shown to be formed (pore size distributions exhibited 3 peaks, corresponding 3 effective size of mesopores in the 30–100 Å range). The investigation of sorption of glucose oxidase on obtained aluminosilicate mesoporous substances was carried out, the results obtained allowus to consider such materials as prospect for creation high capable and selective sorbents for biomolecules sorption, as well as active elements of chemical and biosensors.     

醋酸和丙三醇对制备SrTiO3的影响

醋酸和丙三醇对制备ＳｒＴｉＯ_３的影响颜秀茹，霍明亮，王建萍，王菲，曾淑兰（天津大学化学系天津３０００７２）关键词　冰醋酸，溶胶－凝胶过程，丙三醇，ＳｒＴｉＯ_３ＳｒＴｉＯ３是电子材料中使用最广的材料之一，有关它的制备已有不少报道。一般可以通过ＳｒＣＯ...     

邻基效应促进的2-芳基硫代芳胺衍生物的简易合成

2-芳基硫代芳胺的结构广泛存在于许多具有重要生理、药理活性的天然产物、药物以及材料当中, 研究此类结构的构建对这些化合物的合成路线设计可以提供新的思路. 传统合成2-芳基硫代芳胺, 常需多步骤或高温、强碱条件下进行, 能进行此类反应的反应物有限, 所得产物收率不高. 选用三氟乙酰基作为芳胺氮原子上的保护基, 利用三氟乙酰基的邻位促进效应, 并采用碘化亚铜/L-脯氨酸的催化体系, 在乙二醇二甲醚中, 碳酸钾为碱, 于60 ℃一步实现N-三氟乙酰基邻碘代苯胺与芳基硫酚的偶联, 以高产率获得了N-三氟乙酰基-2-芳基硫代芳胺. 反应条件温和, 催化体系价廉易得, 反应操作简便.     

Influence of Nucleation Agents Concentration on Crystallization Structure and Properties of Glass-ceramics

Deep color glass-ceramics is prepared by using gold tailings as the main raw material, and Cr2O3 is added as nucleation agent. Influence of different Cr2O3 additions on crystallization structure and properties of CaO-MgO-Al2O3-SiO2 glass-ceramics has been discussed so as to select optimum additions. DTA is employed to determine optimum crystallization and nucleation temperatures; XRD and SEM are used to characterize microstructure of each sample; and performance indexes, such as water absorption, bulk density, flexural strength and so on, are also determined. Experimental results show that when 3wt% Cr2O3 is introduced, fine glass-ceramics with diopside as the main crystal and Ca-Fe diopside as the second-crystal is obtained, and its corresponding performance indexes are as follows: water absorption 0.12%, bulk density 2.56 g/cm3, and flexural strength 70.01 Mpa.     

金属配位模板聚合物的分子识别特性的研究

以Ｃｏ（Ⅱ）和敌鼠配合物为模板,４－乙烯吡啶为功能基单体,乙二醇二甲基丙烯酸酯为交联剂,采用分子印迹技术,合成了具有类似于金属螯合抗体结合位点的金属配位模板聚合物。系统研究了金属离子对模板聚合物靠拢性结构敌鼠的调节作用。     

硫的自述

硫,无论是元素还是化合物,都在人类的生活与生产中起着至关重要的作用。本文将硫元素拟人化,介绍了其发展史,在地球上的分布、性质以及在生活中的应用,让读者在趣味阅读中了解硫及其化合物。     

烯丙位氧化的几种方法

综述了近年来烯丙位氧化的研究进展，详细讨论了过渡金属及其络合物、硒化 合物在烯丙位氧化中的应用，并简述了丁基锂方法、固相催化方法、生物氧化方法 和次氯酸钠氧化方法在烯丙位氧化中的应用．     

Production of biodiesel fuel by transesterification of rapeseed oil

Fatty acid methyl esters (FAMEs) show large potential applications as diesel substitutes, also known as biodiesel fuel. Biodiesel fuel as renewable energy is an alternative that can reduce energy dependence on petroleum as well as air pollution. Several processes for the production of biodiesel fuel have been developed. Transesterification processes under alkali catalysis with short-chain alcohols give high yields of methyl esters in short reaction times. We investigated transesterification of rapeseed oil to produce the FAMEs. Experimental reaction conditions were molar ratio of oil to alcohol, concentration of catalyst, type of catalyst, reaction time, and temperature. The conversion ratio of rapeseed oil was enhanced by the alcohol:oil mixing ratio and the reaction temperature.     

聚吡咯在超级电容器中的应用

聚吡咯以其制备简单、掺杂可逆、环境友好、导电率高、比电容大、具有良好的成膜性而备受关注。特别是在作为超级电容器、二次电池等换能设备电极材料领域中前景广阔。文章简略地介绍了超级电容器的双电层电容和法拉第赝电容产生的机理,概述了近年来聚吡咯与金属氧化物、炭材料等通过化学法、电化学法以及界面化学法等新型手段制备聚吡咯电极的研究进展。     

CO_2加氢制甲醇用高活性和高选择性催化剂的研制

研制了一种CO2加氢制甲醇用高活性和高选择性催化剂Cu-ZnO-Al2O3(简记为RK-11),测定了其催化性能.结果表明,当原料气组成(体积分数)为68.5%H2、2.0%CO、20.5%CO2、9.0%N2,温度为240℃,气体时空速度GHSV=6 000h-1,压力为8.0MPa时,CO2转化率达35.2%,CO转化率达39.8%,甲醇的时空产率达686.1g/(L·h),而甲醇在产物中的选择性达99.3%.