A heterogeneous and reusable nanopolymer-supported palladium catalyst for the copper- and phosphine-free Sonogashira coupling reaction under aerobic conditions in water

We report here the synthesis of a nanopolymer-supported palladium(II) complex catalyst, [PS-tet-Pd(II)] using a simple protocol. The catalyst was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), FT-IR, and energy dispersive X-ray spectroscopy (EDS). PS-tet-Pd(II) proves to be a useful heterogeneous catalyst in the copper- and phosphine-free Sonogashira coupling reaction in water. The catalyst can be recovered from the reaction mixture by simple filtration and reused several times without any significant loss of catalytic activity.     

Immobilized Pd nanoparticles on Tris-modified SiO2：Synthesis,characterization, and catalytic activity in Heck cross-coupling reactions

The preparation of supported Pd nanoparticles on Tris (tris(hydroxymethyl)aminomethane)- modified SiO₂ gel and their catalytic application in Heck coupling are investigated. The catalyst was characterized using a combination of X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, and scanning electron microscopy/energy-dispersive X-ray spectroscopy. The supported Pd nanoparticles were found to be a highly active and reusable catalyst for the Heck reaction at a low Pd loading (0.02 mol%) because of stabilization by the Tris moieties. Several reaction parameters, including the type and amount of solvent, base, and temperature, were evaluated. The heterogeneity of the catalytic system was investigated using different approaches, and showed that slight Pd leaching into the reaction solution occurred under the reaction conditions. Despite this metal leaching, the catalyst can be reused seven times without significant loss of its activity.     

One-pot synthesis of 1,4-dihydropyridines and N-arylquinolines in the presence of copper complex stabilized on MnFe2O4 (MFO) as a novel organic–inorganic hybrid material and magnetically retrievable catalyst

In this work, the design and synthesis of a heterogeneous catalyst based on functionalization of manganese ferrite nanoparticles encapsulated in a silica layer with Schiff base and subsequent incorporation of copper is presented. The fabricated hybrid material was characterized by employing Fourier-transform infrared spectroscopy, X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal gravimetric analysis, vibrating sample magnetometry and inductively coupled plasma-optical emission spectrometry techniques. The prepared organic–inorganic hybrid material was successfully used as an efficient and recoverable catalyst for the synthesis of 1,4-dihydropyridines and N-arylquinolines under mild and green reaction conditions. The results showed that the catalyst exhibited excellent catalytic activity under optimum reaction conditions and the desired products were obtained in good to excellent yields. The new 1,4-dihydropyridines and N-arylquinolines were characterized by Fourier-transform infrared spectroscopy, ¹H NMR and Elemental analysis of Carbon, Hydrogen and Nitrogen (CHN) analyses. Study of the catalyst reusability confirmed that the catalyst could be recycled for five reaction runs with slight loss of the catalytic activity and negligible copper leaching.     

Immobilized Pd on a NHC functionalized metal–organic framework MIL-101(Cr): an efficient heterogeneous catalyst in Suzuki−Miyaura coupling reaction in water

A novel Pd−NHC functionalized metal–organic framework (MOF) based on MIL-101(Cr) was synthesized and used as an efficient heterogeneous catalyst in the C-C bond formation reactions. Using this heterogeneous Pd catalyst system, the Suzuki−Miyaura coupling reaction was accomplished well in water, and coupling products were obtained in good to excellent yields in short reaction time. The Pd−NHC−MIL-101(Cr) was characterized using some different techniques, including Fourier transform-infrared, X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy, inductively coupled plasma and elemental analysis. The microscopic techniques showed the discrete octahedron structure of MIL-101(Cr), which is also stable after chemical modification process to prepare the catalyst system. The TEM images of the catalyst showed the existence of palladium nanoparticles immobilized in the structure of the catalyst, while no reducing agent was used. It seems that the NHC groups and imidazolium moieties in the structure of the MOF can reduce Pd (II) to Pd (0) species. This modified MOF substrate can also prevent aggregation of Pd nanoparticles, resulting in high stability of them in organic transformation. The Pd−NHC−MIL-101(Cr) catalyst system could be simply extracted from the reaction mixture, providing an efficient synthetic method for the synthesis of biaryls derivatives using the aforementioned coupling reaction. The Pd−NHC−MIL-101(Cr) catalyst could be recycled in this organic reaction with almost consistent catalytic efficiency.     

Boehmite@SiO2@ Tris (hydroxymethyl)aminomethane-Cu(I): a novel,highly efficient and reusable nanocatalyst for the C-C bond formation and the synthesis of 5-substituted 1H-tetrazoles in green media

In this work, a versatile protocol was introduced for the preparation of a new Cu(I) supported complex on Silica supported boehmite nanoparticles (Boehmite@SiO₂@Tris-Cu(I)). The structure of the catalyst was comprehensively characterized using Fourier transform infrared spectroscopy (FT-IR), X-Ray Diffractometer (XRD), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma atomic emission spectroscopy (ICP), X-ray mapping, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) techniques. The catalytic activity of this catalyst was studied in the Suzuki cross-coupling reaction and synthesis of 5-substituted 1H-tetrazole derivatives in ethanol and PEG-400 respectively as green solvents. In this sense, simple preparation of the catalyst from the commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, it is worth mentioning that this nanocatalyst was easily recovered, and reused for several times without significant loss of its catalytic efficiency. In addition, stability of the catalyst after recycling was confirmed by FT-IR technique.     

Exploration of copper and amine-free Sonogashira cross coupling reactions of 2-halo-3-alkyl imidazo[4,5-b]pyridines using tetrabutyl ammonium acetate as an activator under microwave enhanced conditions

Enhancing the reactivity of the catalytic system by using palladium catalyst with sterically demanding and electron rich ligands attached to it has often been shown as an appropriate way of performing the copper-free Sonogashira reaction. In this paper, we report PdCl₂(PCy₃)₂ as an efficient catalyst for the copper and amine-free Sonogashira cross coupling reactions of 2-halo-3-alkyl imidazo[4,5-b]pyridines (I, Br, Cl) using tetrabutyl ammonium acetate as an activator under microwave enhanced conditions.     

Agar: a natural and environmentally-friendly support composed of copper oxide nanoparticles for the green synthesis of 1,2,3–triazoles

ABSTRACT

A novel, green and cost-effective heterogeneous nanocatalyst was synthesized by supporting copper (I) oxide nanoparticles on magnetic agar (Cu₂O/Agar@Fe₃O₄). Then, it was characterized with multiple techniques, such as scanning electron microscopy and transmission electron microscopy images, energy-dispersive X-ray analysis, Fourier-transform infrared (FT–IR) spectroscopy, thermogravimetric (TG) analysis, X-ray diffraction pattern, vibrating sample magnetometer curve, and inductively coupled plasma analysis. The catalytic activity of the newly designed catalyst was investigated in a one-pot three-component reaction of alkyl halides, sodium azide, and alkynes to obtain 1,4–disubstituted 1,2,3–triazoles in high yields in water–ethanol media. The present catalyst was simply separated from the reaction media by an external magnet and reused at least five subsequent runs without significant activity loss.     

Copper(I) stabilized on N,N′-methylene bis-acrylamide crosslinked polyvinylpyrrolidone: An efficient reusable catalyst for click synthesis of 1,2,3-triazoles in water

N,N′-methylene bis-acrylamide crosslinked N-vinyl-2-pyrrolidone (NVPMBA) polymer was prepared via suspension polymerization technique and used as a polymeric support for the reduction of Cu(II) to Cu(I). It was observed that NVPMBA matrix facilitated the stabilization of Cu(I) particles. Furthermore, the copper supported polymer catalyst (CuNVPMBA) was characterized by Fourier transform infrared, X-ray diffraction, scanning electron microscopy (SEM), energy dispersive X-ray analysis, transmission electron microscope (TEM), X-ray photoelectron spectra (XPS), inductively coupled plasma optical emission spectroscopy, and derivative thermogravimetry analysis. SEM showed that both the polymer and CuNVPMBA exhibit a spherical morphology. TEM revealed that copper nanoparticles formed on the polymer surface have an average particle size of 5.14 nm. XPS analysis confirmed the presence of Cu(I) and Cu(II) in the ratio 1:2. The copper content in CuNVPMBA was found to be 1.25 wt%. CuNVPMBA was found to be very effective in promoting the click reaction between terminal alkynes and azides in aqueous media in the absence of ascorbate or external base under mild conditions to form 1,2,3-triazoles in excellent yield with a copper loading as low as 0.2 mol%. The catalyst could be reused and recycled several times without significant loss of catalytic activity.     

Polymer‐anchored copper(II) complex: an efficient reusable catalyst for the synthesis of propargylamines

A new, heterogeneous, polymer‐supported copper(II) complex was prepared and characterized using various techniques, including Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X‐ray spectroscopy, atomic absorption spectroscopy and thermogravimetric analysis. This heterogeneous copper catalyst is efficient for the synthesis of propargylamines via a three‐component coupling reaction of aldehydes, amines and alkynes. The effect of solvent on the coupling reactions was investigated. Further, the catalyst can be easily recovered quantitatively by simple filtration and reused for a minimum number of cycles without significant loss of its catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Pd nanoparticles supported on reduced graphene oxide as an effective and reusable heterogeneous catalyst for the Mizoroki–Heck coupling reaction

A general method for the synthesis of palladium nanoparticles loaded on reduced graphene oxide functionalized with diethylenetriamine (PdNPs/rGO-NH₂) using a sonochemical procedure is described. The heterogeneous nanocomposite was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray, thermogravimetric analysis, high-angle annular dark field scanning transmission electron microscopy, X-ray photoelectron spectroscopy, UV–visible absorption, and inductively coupled plasma optical emission spectrometry. The PdNPs/rGO-NH₂ was very effective for the Mizoroki–Heck coupling reaction of several aryl iodide compounds with different alkenes in the presence of triethylamine. The reaction provides the coupling products in good to excellent yields (59–100%). Additionally, the PdNPs/rGO-NH₂ catalyst can be reutilized for six successive runs without any apparent diminution of its catalytic reactivity.     

Trisaminomethane–cobalt complex supported on Fe3O4 magnetic nanoparticles as an efficient recoverable nanocatalyst for oxidation of sulfides and C–S coupling reactions

In this work, trisaminomethane–cobalt complex immobilized onto the surface of Fe₃O₄ magnetic nanoparticles was successfully prepared via a simple and inexpensive procedure. The prepared nanocatalyst was considered a robust and clean nanoreactor catalyst for the oxidation and synthesis of sulfides under green conditions. This ecofriendly heterogeneous catalyst was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, energy-dispersive X-ray spectroscopy, inductively coupled plasma-atomic emission spectroscopy, thermogravimetric analysis, vibrating sample magnetometry, X-ray mapping, scanning electron microscopy, and transmission electron microscopy techniques. Use of green medium, easy separation and workup, excellent reusability of the nanocatalyst, and short reaction time are some outstanding advantages of this method.     

Cu(I)-anchored polyvinyl alcohol coated-magnetic nanoparticles as heterogeneous nanocatalyst in Ullmann-type C–N coupling reactions

In this paper, the preparation of a novel magnetic nanocatalyst (Fe₃O₄@PVA/CuCl) is described, which involves coating of polyvinyl alcohol (PVA) onto the surface of Fe₃O₄ nanoparticles and its subsequent coordination with CuCl catalyst. The nanocatalyst was characterized by various analytical methods, including Fourier-transform infrared, X-ray diffraction, inductively coupled plasma spectroscopy, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy, vibrating-sample magnetometry, and EDX elemental mapping. Moreover, the nanocatalyst was efficiently used in the N-arylation of amines via the formation of a carbon–nitrogen bond between the aryl halides and amines by Ullmann-type coupling reactions. The catalyst was sufficiently stable and can be reused for at least seven times in a model Ullmann reaction without remarkable alteration in its catalytic behavior. Heterogeneity of the catalyst was investigated by a hot filtration test.     

Palladium Nanoparticles Immobilized on Individual Calcium Carbonate Plates Derived from Mussel Shell Waste: An Ecofriendly Catalyst for the Copper‐Free Sonogashira Coupling Reaction

The conversion of waste into high‐value materials is considered an important sustainability strategy in modern chemical industries. A large volume of shell waste is generated globally from mussel cultivation. In this work, mussel shell waste (Perna viridis ) is transformed into individual calcium carbonate plates (ICCPs) and is applied as a support for a heterogeneous catalyst. Palladium nanoparticles (3–6 nm) are deposited with an even dispersion on the ICCP surface, as demonstrated by X‐ray diffraction and scanning electron microscopy. Using this system, Sonogashira cross‐coupling reactions between aryl iodides and terminal acetylenes were accomplished in high yields with the use of 1 % Pd/ICCP in the presence of potassium carbonate without the use of any copper metal or external ligand. The Pd/ICCP catalyst could also be reused up to three times and activity over 90 % was maintained with negligible Pd‐metal leaching. This work demonstrates that mussel shell waste can be used as an inexpensive and effective support for metal catalysts in coupling reactions, as demonstrated by the successful performance of the Pd‐catalyzed, copper‐free Sonogashira cross‐coupling process.     

磁性纳米颗粒负载钯催化剂对Heck反应的催化活性

采用水热法合成了碳包埋磁性纳米复合颗粒C/(Au@Fe),并以之为载体制备了纳米钯催化剂,利用透射电镜、X射线光电子能谱和振动样品磁强计等手段对催化剂进行了表征,评价了催化剂对Heck反应的催化活性.结果表明,催化剂的平均粒径约为300nm,表面覆盖着一层粒径为12nm的钯颗粒,整个催化剂呈现超顺磁性.对于碘代苯与丙烯酸之间的Heck反应,在乙酸钠或三乙胺碱性条件下反应4h,碘代苯转化率可达95%以上.催化剂重复使用10次时仍可保持很高的催化活性(碘代苯转化率88%).对于其他不同反应底物之间的Heck反应,催化剂同样显示有较高的催化活性.催化剂可稳定分散于反应体系中,并可在外磁场作用下快速与反应体系分离.     

Facile preparation of highly stable and active hybrid palladium nanoparticles: effectual,reusable and heterogeneous catalyst for coupling reactions

Palladium nanoparticles were supported on a bed of Fe₃O₄@‐NH₂@Murexide using a simple and efficient method, and characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies and inductively coupled plasma optical emission spectrometry. The catalytic system showed great efficiency in cross‐coupling reaction of aryl iodides and arylboronic acid and in Sonogashira cross‐coupling reaction in the green solvent EtOH–H₂O (1:1). The isolation and recovery of the catalyst were simple and facile and it could be used for several successive Suzuki–Miyaura coupling and Sonogashira cross‐coupling reactions. Copyright © 2016 John Wiley & Sons, Ltd.     

Fabrication of nitrogen-enriched graphene oxide/Cu NPs as a highly efficient and recyclable heterogeneous nanocatalyst for the Chan–Lam cross-coupling reaction

Herein, we demonstrate the direct polymerization of melamine and cyanuric chloride in the surface of graphene oxide (GO) (N-enriched GO) in order to develop a new nanocatalyst. The supramolecular polymerized GO acts not only as a spacer to prevent the restacking of graphene sheets but also as a nitrogen source to generate active centers for Cu NP attachments. Subsequently, the nitrogen on the surface of the GO sheets coordinates with copper ions to generate copper nanoparticles. The prepared nanocatalyst was characterized by Fourier transform infrared spectroscopy, X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy and thermogravimetric analysis. This catalyst showed high efficiency and good activity in the Chan–Lam cross-coupling reaction of N-heterocycles and aniline derivatives with high yields in short reaction times. In addition, the nanocatalyst was easily recovered and reused for five consecutive runs without any noticeable loss of performance.     

Copper/Schiff-base complex immobilized on amine functionalized silica mesoporous magnetic nanoparticles under solvent-free condition: A facile and new avenue for the synthesis of thiazolidin-4-ones

A copper/Schiff-base complex supported on amine-functionalized silica mesoporous magnetic nanoparticles was prepared as novel magnetically interphase nanoparticles and its morphology and structure were evaluated using Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, thermogravimetric analysis, zeta potential, and a vibrating sample magnetometer. The catalytic activity of the synthesized nanoparticles was evaluated for the synthesis of thiazolidine-4-ones.     

高效组合型 Pd/C 催化剂用于 Suzuki 偶联反应

 采用有机金属 Pd2(dba)3 (dba 为二亚苄基丙酮) 还原分解法制得均匀分布的 Pd 纳米颗粒 (粒径为 3~6 nm) 混合液, 并用活性炭直接吸附得到了组合型 Pd/C 纳米催化剂. 采用透射电子显微镜、X 射线光电子能谱和 X 射线衍射等手段测定了催化剂表面 Pd 颗粒大小分布、晶型和化学态等. 将该催化剂用于 Suzuki 碳-碳偶联反应, 其催化活性比浸渍法制备的 Pd/C 催化剂高 2 倍以上. 以溴代芳烃为底物时, 在 80 oC 下 0.5 h 后偶联产物收率可达 98% 以上. 以邻氯硝基苯为底物时, 在 110 oC 下 1 h 后偶联产物收率可达 64%; 延长反应时间, 产物收率可达 90% 以上.     

Preparation,characterization and application of silica‐supported palladium complex as a new and heterogeneous catalyst for Suzuki and Sonogashira reactions

An efficient heterogeneous Pd catalytic system has been developed, based on immobilization of Pd nanoparticles (PNPs) on a silica‐bonded propylamine–cyanuric–cysteine (SiO₂–pA–Cyan–Cys) substrate. The synthesized catalyst was characterized by transmission electron microscopy, scanning electron microscopy, FT‐IR, N₂ adsorption analysis (BET), TGA and inductively coupled plasma/atomic emission spectroscopy, and catalytic activity of this catalyst was investigated in the Suzuki and Sonogashira cross‐coupling reactions. The catalysts showed excellent performance in these two reactions, including various aryl halide derivatives (except aryl chloride derivatives) with phenylboronic acid and phenylacetylene under green conditions. Moreover, the catalyst was recycled for several runs without any significant loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

超顺磁性介孔纳米颗粒嫁接肟Pd环络合物对Heck反应的催化活性

采用溶胶-凝胶法制备出介孔二氧化硅包裹四氧化三铁纳米复合颗粒,在其表面修饰巯基,并以此为载体通过-SCH2-化学键嫁接长链的肟钯环络合物.利用透射电镜(TEM)、高分辨透射电镜(HRTEM)、傅里叶变换红外(FT-IR)光谱、N2吸附-脱附、X光电子能谱(XPS)、振动样品磁强计(VSM)等手段对催化剂进行表征,通过Heck反应对催化剂的活性进行评价.实验结果表明:所制备的磁性颗粒直径约为150nm,比表面积为287.0m2·g-1,且具有大小为3.5nm呈不规则的孔道结构,整个催化剂呈现超顺磁性.对于碘代苯与丙烯酸乙酯之间的Heck反应,2.5h后碘代苯的转化率可达到99%,催化剂在重复使用6次后能保持很高的催化活性(碘代苯转化率为95%).催化剂可稳定分散于反应体系中,并可在外磁场作用下快速与反应体系分离.