磁性纳米颗粒负载钯催化剂对Heck反应的催化活性

采用水热法合成了碳包埋磁性纳米复合颗粒C/(Au@Fe),并以之为载体制备了纳米钯催化剂,利用透射电镜、X射线光电子能谱和振动样品磁强计等手段对催化剂进行了表征,评价了催化剂对Heck反应的催化活性.结果表明,催化剂的平均粒径约为300nm,表面覆盖着一层粒径为12nm的钯颗粒,整个催化剂呈现超顺磁性.对于碘代苯与丙烯酸之间的Heck反应,在乙酸钠或三乙胺碱性条件下反应4h,碘代苯转化率可达95%以上.催化剂重复使用10次时仍可保持很高的催化活性(碘代苯转化率88%).对于其他不同反应底物之间的Heck反应,催化剂同样显示有较高的催化活性.催化剂可稳定分散于反应体系中,并可在外磁场作用下快速与反应体系分离.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/SiC催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明, SiC表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 mL苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt% Pd/SiC催化剂存在的条件下,在CO压力为1.0 MPa和100oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且, Pd/SiC对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时, Pd/SiC也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

Pd/SiC催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应性能（英文）

以高比表面积碳化硅为载体,通过液相还原法制备出Pd/Si C催化剂,并用于催化碘代芳烃和芳基硼酸羰化Suzuki偶联反应.利用X射线衍射、电感耦合等离子体质谱和高分辨透射电子显微镜等对催化剂进行了表征.结果表明,Si C表面的Pd纳米颗粒分散均匀,平均粒径约为2.8 nm.在优化溶剂、碱、压力和温度等反应条件后,发现以3 mmol的K2CO3和10 m L苯甲醚分别为碱和溶剂,1.0 mmol碘苯和1.5 mmol苯硼酸在3 wt%Pd/Si C催化剂存在的条件下,在CO压力为1.0 MPa和100 oC下反应8 h即可实现羰化偶联,碘苯转化率为90%,二苯甲酮选择性为99%.并且,Pd/Si C对含有不同官能团的碘代芳烃和芳基硼酸羰化Suzuki偶联反应具有较好的普适性.同时,Pd/Si C也具有较好的稳定性,经5次循环反应后,碘苯转化率从90%降至76%;催化剂活性降低的主要原因是活性组分Pd在有机反应体系中的流失.     

KF改性负载铜催化剂在Heck反应上的应用

KF水溶液浸渍MgO或ZnO载体为改性载体制备了负载铜催化剂,以卤苯与丙烯酸正丁酯的反应为模型,考察了对Heck反应的催化性能。结果表明,对碘苯与丙烯酸正丁酯的Heck反应的催化性能,未改性催化剂基本没有活性,而改性后,10%Cu/5%KF/ZnO、20%Cu/10%KF/ZnO催化剂的催化转化率为100%和反式异构体的选择性为98%以上。改性催化剂10%Cu/5%KF/ZnO对于对-硝基溴苯与丙烯酸正丁酯的Heck反应的转化率为34.3%。该催化剂重复使用4次仍有较高催化活性,如20%Cu/10%KF/ZnO为65.4%。催化剂的XRD分析表明,改性剂的加入可提高催化剂表面CuO的含量而提高催化性能。     

壳聚糖钯催化Heck反应合成肉桂酸丁酯的研究

以天然高分子壳聚糖为载体,制得了用于Heck反应的壳聚糖钯配合物多相催化剂,用XPS对其结构进行了表征,并利用正交实验方法考察了原料配比、缚酸剂三乙胺的用量、反应温度、反应时间和催化剂的用量对碘代苯与丙烯酸丁酯Heck反应的影响.结果表明:反应因素的影响大小为:反应温度>原料配比>三乙胺用量>催化剂的用量>反应时间;在最佳的反应条件下:碘代苯与丙烯酸丁酯的摩尔比为1∶1、三乙胺9mmol、催化剂0.1g(钯含量1.88×10-2mmol)时,氮气保护下140℃反应8h,肉桂酸丁酯的产率可高达99.8%.并且该催化剂对其它丙烯酸酯的Heck反应也具有良好的催化活性.     

固载Pd配合物的二元Smectite介孔材料的合成及催化Heck反应的性能研究

水热条件下合成了含M2+离子(Mg~(2+)、 Co~(2+)、 Ni~(2+)和Zn~(2+))的介孔Smectite材料. 经X射线粉末衍射和比表面积与孔隙率测定, 确定了其晶体结构和孔性质. 以配位体交换法固载金属Pd配合物--Pd(PhCH_2CN)_2Cl_2, 制备固载Pd配合物的Smectite介孔材料催化剂-SM(M)Pd. 负载后平均孔径的测定结果表明, SM(M)Pd平均孔径均高于H-Mont-Pd平均孔径(3.70 nm), 说明固载的Pd(PhCH_2CN)_2Cl_2能够扩大H-Mont-Pd孔径. 不同SM(M)Pd 催化Heck偶联反应结果表明, SM(Co)Pd催化剂活性最好, 这一方面与SM(Co)Pd具有最大的比表面积和孔容一致, 另外也与Co~(2+)电子结构有关. 在该催化剂下, 碘苯与丙烯酸甲酯的Heck偶联反应的适宜溶剂是N,N-二甲基乙酰胺(NMAC), 反应温度为80 ℃, 反应时间1 h, 催化剂用量5 mg/mmol碘苯, 5次重复使用催化剂活性没有下降, 碘苯转化率接近100%.     

介孔碳球的制备及其催化性能研究

通过在3-氨基苯酚与甲醛聚合成球的过程中引入模板剂二氧化硅纳米颗粒,随后碳化、腐蚀除硅,制备得到了具有良好介孔结构的碳纳米球.通过透射电子显微镜(TEM)、粉末X射线衍射(XRD)、N_2等温吸脱附(BET)等表征手段对样品形貌和结构进行了分析,表明介孔碳球分散性良好、比表面积较大(~294m~2/g)、孔径分布均匀(~3.8nm).以该介孔碳球为载体,负载金属钯纳米颗粒,得到了金属颗粒分散均匀、粒径小(~2nm)的Pd/介孔碳球复合材料.应用于催化碘苯和苯硼酸的Suzuki偶联反应中,具有良好的催化活性.反应5min,碘苯的转化率达99.06%,催化剂循环使用7次,碘苯转化率未见明显下降.     

高活性氨基胍树脂负载Pd(0)配合物的催化性能研究

以氨基碳酸胍改性氯球为载体, 与氯化钯溶液反应并还原制备氨基胍树脂负载钯(0)催化剂. 对催化剂进行了FT-IR, XRD, BET, TG-DTA表征. 研究了该催化剂对各种取代卤代苯与丙烯酸、苯乙烯的Heck芳基化反应催化性能. 实验结果表明, 该催化剂对活性(吸电子基)溴代苯和碘苯具有良好的催化活性, 对含活性吸电子基的溴代苯(4-溴苯甲醛和4-溴硝基苯)于140 ℃时能在22 min内完成Heck 芳基化反应; 催化剂具有较好的重复使用性能, 在90 ℃下催化碘苯与丙烯酸的反应循环21次时仍能保持良好的催化活性. 反应机理研究表明: 催化反应的活性组分是可溶性钯物种; 可溶性钯是由卤代苯与催化剂表面上的钯氧化加成所致.     

高活性氨基胍树脂负载Pd(0)配合物的催化性能研究

以氨基碳酸胍改性氯球为载体,与氯化钯溶液反应并还原制备氨基胍树脂负载钯(0)催化剂.对催化剂进行了FT-IR,XRD,BET,TG-DTA表征.研究了该催化剂对各种取代卤代苯与丙烯酸、苯乙烯的Heck芳基化反应催化性能.实验结果表明,该催化剂对活性(吸电子基)溴代苯和碘苯具有良好的催化活性,对含活性吸电子基的溴代苯(4-溴苯甲醛和4-溴硝基苯)于140℃时能在22min内完成Heck芳基化反应;催化剂具有较好的重复使用性能,在90℃下催化碘苯与丙烯酸的反应循环21次时仍能保持良好的催化活性.反应机理研究表明:催化反应的活性组分是可溶性钯物种;可溶性钯是由卤代苯与催化剂表面上的钯氧化加成所致.     

Immobilized Pd nanoparticles on Tris-modified SiO2：Synthesis,characterization, and catalytic activity in Heck cross-coupling reactions

The preparation of supported Pd nanoparticles on Tris (tris(hydroxymethyl)aminomethane)- modified SiO₂ gel and their catalytic application in Heck coupling are investigated. The catalyst was characterized using a combination of X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, and scanning electron microscopy/energy-dispersive X-ray spectroscopy. The supported Pd nanoparticles were found to be a highly active and reusable catalyst for the Heck reaction at a low Pd loading (0.02 mol%) because of stabilization by the Tris moieties. Several reaction parameters, including the type and amount of solvent, base, and temperature, were evaluated. The heterogeneity of the catalytic system was investigated using different approaches, and showed that slight Pd leaching into the reaction solution occurred under the reaction conditions. Despite this metal leaching, the catalyst can be reused seven times without significant loss of its activity.     

Pd nanoparticles supported on reduced graphene oxide as an effective and reusable heterogeneous catalyst for the Mizoroki–Heck coupling reaction

A general method for the synthesis of palladium nanoparticles loaded on reduced graphene oxide functionalized with diethylenetriamine (PdNPs/rGO-NH₂) using a sonochemical procedure is described. The heterogeneous nanocomposite was characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray, thermogravimetric analysis, high-angle annular dark field scanning transmission electron microscopy, X-ray photoelectron spectroscopy, UV–visible absorption, and inductively coupled plasma optical emission spectrometry. The PdNPs/rGO-NH₂ was very effective for the Mizoroki–Heck coupling reaction of several aryl iodide compounds with different alkenes in the presence of triethylamine. The reaction provides the coupling products in good to excellent yields (59–100%). Additionally, the PdNPs/rGO-NH₂ catalyst can be reutilized for six successive runs without any apparent diminution of its catalytic reactivity.     

Synthesis and characterization of mesoporous organosilica supported palladium (SBA-Pr-NCQ-Pd) as an efficient nanocatalyst in the Mizoroki–Heck coupling reaction

In the present study, the modification of a mesoporous organosilica nanocomposite SBA-15 (Santa Barbara Amorphous 15) was carried out in two steps, first through the surface functionalization of SBA-Pr-NH₂ with 2-chloroquinoline-3-carbaldehyde to form SBA-Pr-NCQ, and then through a post-modification process with palladium ions. The target nanocompound structure of SBA-Pr-NCQ-Pd was characterized by different techniques (thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, Energy-dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy). The catalytic performance of the porous inorganic–organic hybrid nanocomposite (SBA-Pr-NCQ-Pd) in one of the most important carbon–carbon bond-forming processes, the Mizoroki–Heck coupling reaction of aryl halides and methacrylate in water/ethanol media, was examined. Compared to previous reports, this protocol afforded some advantages, such as high yields of products, short reaction times, catalyst stability without leaching, simple methodology, easy workup, and greener conditions. Also, the nanocatalyst can be easily separated from the reaction mixture and reused several times without a significant decrease in activity and promises economic as well as environmental benefits.     

Preparation of siloxene nanosheet‐supported palladium as sustainable catalyst for Mizoroki–Heck reaction

Siloxene nanosheets were successfully modified with palladium nanoparticles by reducing palladium chloride with hydrazine hydrate. The palladium nanoparticles–siloxene nanosheets as a catalyst for the Mizoroki–Heck reaction exhibited high activity, recoverability and stability. The structural morphology of the catalyst was investigated using transmission electron microscopy. High efficiency of the catalyst was proved in the Mizoroki–Heck reaction after five catalytic recycles. Copyright © 2014 John Wiley & Sons, Ltd.     

Ni-Mo双金属氧化物催化剂CVD法大量制备成束多壁纳米碳管

采用溶胶凝胶法合成的Ni-Mo双金属氧化物催化剂,用CVD法催化裂解甲烷从而大量制备高质量高纯度的成束多壁纳米碳管.实验结果表明,该催化剂具有很高的活性和催化效率.反应2 h后,制备的多壁纳米碳管的量可达到初始催化剂量的80倍以上.碳管的直径较均匀,在10～20 nm之间.随着反应时间的延长,制备的纳米碳管石墨化程度增加,反应1 h后,粗产品中纳米碳管的含量就超过了97％. 简单放大后,单炉每克催化剂可以在0.5 h内制得40 g以上多壁纳米碳管.     

An eco-friendly and energy-efficient protocol for the Heck reaction under solar radiation catalyzed by rice husk silica‐anchored cinchonine.Pd nanocomposite

An environmentally friendly and energy-efficient method for the carbon–carbon bond formation via cross-coupling Heck reaction using rice husk silica-anchored cinchonine.Pd nanocomposite as a heterogeneous catalyst under concentrated solar radiation is being reported. In this investigation, first, silica nanoparticles were synthesized using rice husks as available agricultural bioresources. Then, the surface of nano silica was modified by grafting (3-mercaptopropyl) trimethoxysilane, and after that, thiol-ene free radical reaction of its SH groups with alkene function of cinchonine by azobisisobutylonitrile initiator. Finally, the target nanocomposite, nano SiO₂-S-Cin.Pd, was created via loading palladium nanoparticles into the mesoporous nanocomposite by its reaction by palladium acetate, followed by ethanol reduction. The structure and morphology of the nano SiO₂-S-Cin.Pd nanocomposite was characterized using Fourier transform infrared spectra, X-ray diffraction patterns, energy-dispersive X-ray spectroscopy, and transmission electron microscopy. The catalytic ability of this nanocomposite was investigated in the arylation of olefins in both concentrated solar radiation and conventional thermal conditions. A comparison of the conventional and CSR methods for C–C bond formation in PEG, showed that the CSR approach is a better alternative route with a high energy-saving strategy. The nanocatalyst is easily removed from the mixture and has been tested on several runs without a loss of catalytic activity. The heterogeneity of the nano SiO₂-S-Cin.Pd catalyst was confirmed by hot filtration test. This method has the advantages of simple methodology, easy work-up, high yields, short reaction times, and greener conditions. In addition to convenience, this technology improves product purity and offers economic and environmental benefits.     

HypoGel负载Pd纳米催化剂制备与表征及温和条件下催化Suzuki反应(英文)

A new heterogeneous catalyst composed of Pd nanoparticles immobilized within a HypoG el resin has been prepared in the absence of any ligands using an extensive cross-linking method.This newly developed nanocatalyst was characterized by N_2 adsorption-desorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),scanning electron microscopy(SEM),energy dispersive X-ray(EDX),Fourier transform infrared spectroscopy and inductively coupled plasma-mass spectrometer(ICP-MS)techniques.TEM and XRD results revealed that the Pd nanoparticles were well dispersed with diameters in the range of 4–12 nm,and an average size of about 8 nm.The cross-linked Pd catalyst demonstrated excellent catalytic activity towards the synthesis of a series of biaryl compounds by the reaction of various aryl halides(e.g.,bromides andiodides)with phenylboronic acid in the presence of tetrabutylammonium bromide.ICP-MS analysis indicated that there was only 0.25%weight loss of Pd(0.55±0.02 ppm)from the supported catalyst after the first cycle reaction.Furthermore,the catalyst showed excellent reusability(up to five uses)with consistently high levels of catalytic activity following its recovery by filtration.     

氮化硼纳米片负载Pd(OAc)2催化剂的制备及催化微波辅助Heck反应

以液相超声剥离的氮化硼纳米片(BNNSs)为载体, 通过表面羟基、 氨基、 席夫碱共价功能化后与Pd ²⁺配位, 制备负载型催化剂Pd@BNNSs-Schiff, 并将该催化剂应用于微波辅助的Heck反应. 通过傅里叶红外光谱(FTIR)、 激光拉曼(Raman)光谱、 X射线衍射(XRD)、 同步热分析(TGA)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和元素分布分析(EDS mapping)对催化剂的结构和形貌进行了表征. 结果表明, 当苯乙烯与碘苯摩尔比为1.25∶1, 溶剂为N,N-二甲基甲酰胺, 缚酸剂为三乙胺, 催化剂Pd用量为0.08%(质量分数)时, 以450 W功率微波辐射20 min收率最高为95.6%; 催化活性明显优于以相同方法制备的催化剂Pd@GO-Schiff(78.3%)(GO=氧化石墨烯); Pd@BNNSs-Schiff循环利用6次后仍具有较高的催化活性,参照催化剂在循环3次后活性明显降低, 7次后失活.     

Biogenic synthesis of palladium nanoparticles using Boswellia sarrata and their applications in cross-coupling reactions

A facile and green route for biogenic synthesis of palladium nanoparticles (PdNPs) using aqueous extract of nontoxic and renewable Boswellia sarrata leaves is reported. The as-synthesized PdNPs were systematically characterized by using ultraviolet (UV)–visible spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The PdNPs were crystalline and cubic in nature with average particle size of ~6 nm and successfully employed as heterogeneous catalyst in the Suzuki–Miyaura and Mizoroki–Heck cross-coupling reactions. The PdNPs could be recycled up to five times with modest change in the catalytic activity.