High frequency characteristics of NiO/(FeCo/NiO)10 multilayers with exchange anisotropy

[NiO/Fe₆₅Co₃₅]₁₀ exchange-coupled multilayer films for high frequency applications are fabricated, and their static magnetic property and microwave permeability are studied systematically. Both exchange bias field and ferromagnetic resonance frequency of the multilayers increase with decreasing Fe₆₅Co₃₅ thickness, which means that the microwave properties such as permeability and FMR frequency can be controlled by changing Fe₆₅Co₃₅ thickness in the exchange-coupled films. Ferromagnetic resonance frequencies beyond 7 GHz of the films are measured and reported for the first time.     

Room temperature magnetic properties of ZnO nanostructured films

The ZnO nanorod array films have been epitaxially deposited on indium tin oxide (ITO) glass along 〈0001〉 direction. It is found that the film is grown in a two-step process including nanoparticle film nucleation and oriented rod growth. The as-prepared ZnO film shows a dominant diamagnetic signal and a weak ferromagnetic signal at room temperature. The room temperature ferromagnetism deteriorated by annealing in air or N₂. The photoluminescent spectra revealed that the intensity of ZnO defect band decreases after annealing. Thus, the decreased ferromagnetism is likely to have resulted from the decrease of oxygen vacancies and defects in the as-prepared film. Moreover, ZnO deposited at various times showed that defects located at or near the interface between the substrate and the film play a major role in ferromagnetism. It suggests that ferromagnetism can be tuned by changing the defects in ZnO.     

Transparent conductive ZnO:Al films grown by atomic layer deposition for Si-wire-based solar cells

Structural, electrical, and optical properties of atomic layer-controlled Al-doped ZnO (ZnO:Al) films grown by atomic layer deposition (ALD) on glass substrates were characterized at various growth temperatures for use as transparent electrodes. The Al atomic content in ZnO:Al films increased due to the reduced ZnO film growth rate with increasing temperature. The preferred orientation of ZnO:Al films was changed, and the optimum condition for best crystallinity was identified by varying the growth temperature. Furthermore, the carrier concentration of free electron was increased by substituting the Zn sites with Al atoms in the crystal, resulting from monolayer growth based on alternate self-limiting surface chemical reactions. The electrical resistivity of ZnO:Al film grown by ALD at 225 °C reached the lowest value of 8.45 × 10⁻⁴ Ω cm, with a carrier mobility of 9.00 cm² V⁻¹ s⁻¹ and optical transmittance of ∼93%. This result demonstrates that ZnO:Al films grown by ALD possess excellent potential for applications in electronic devices and displays as transparent electrodes and surface passivation layers.     

Highly conductive and transparent laser ablated nanostructured Al: ZnO thin films

Al doped ZnO thin films are prepared by pulsed laser deposition on quartz substrate at substrate temperature 873 K under a background oxygen pressure of 0.02 mbar. The films are systematically analyzed using X-ray diffraction, atomic force microscopy, micro-Raman spectroscopy, UV-vis spectroscopy, photoluminescence spectroscopy, z-scan and temperature-dependent electrical resistivity measurements in the temperature range 70-300 K. XRD patterns show that all the films are well crystallized with hexagonal wurtzite structure with preferred orientation along (0 0 2) plane. Particle size calculations based on XRD analysis show that all the films are nanocrystalline in nature with the size of the quantum dots ranging from 8 to 17 nm. The presence of high frequency E₂ mode and longitudinal optical A₁ (LO) modes in the Raman spectra suggest a hexagonal wurtzite structure for the films. AFM analysis reveals the agglomerated growth mode in the doped films and it reduces the nucleation barrier of ZnO by Al doping. The 1% Al doped ZnO film presents high transmittance of ∼75% in the visible and near infrared region and low dc electrical resistivity of 5.94 × 10⁻⁶ Ω m. PL spectra show emissions corresponding to the near band edge (NBE) ultra violet emission and deep level emission in the visible region. Nonlinear optical measurements using the z-scan technique shows optical limiting behavior for the 5% Al doped ZnO film.     

Transmission electron microscopy of Co2(Cr1−xFex)Al sputtered films and their magnetic tunneling junctions

The microstructures of Co₂FeAl and Co₂(Cr_0.4Fe_0.6)Al sputtered films and of their magnetic tunnel junctions (MTJs) have been investigated to discuss the possible reasons for an unexpectedly low tunneling magnetoresistance (TMR). The structure of the Co₂FeAl film changed from B2 to L2₁ with increasing substrate temperature, while that of the Co₂(Cr_0.4Fe_0.6)Al film remained B2 up to 500 °C. The thermodynamically predicted phase separation was not observed in the films. The low TMR values obtained from the MTJs using the Co₂FeAl and Co₂(Cr_0.4Fe_0.6)Al films are attributed to the low-spin polarization expected from the low degree of order in these films. The TMR values depend sensitively on the interfacial structure of the tunnel junctions when the degree of order of the film is low.     

PECVD制备AZO（ZnO:Al）透明导电薄膜

采用PECVD（等离子体增强化学气相沉积）工艺在普通玻璃和Si基上制备出了方块电阻低至89 Ω,可见光透过率高达79%,对基体附着力强的多晶态的AZO（ZnO:Al）薄膜.采用PECVD法制备AZO薄膜是一种有益的尝试,AZO透明导电薄膜不仅具有与ITO（透明导电薄膜,如In₂O₃:Sn）可比拟的光电特性,而且价格低廉、无毒,在氢等离子体环境中更稳定,所获结果对实际工艺条件的选择具有一定借鉴作用和参考价值. 关键词： AZO（ZnO:Al） 等离子体增强化学气相沉积 透明导电薄膜     

Spray pyrolised Al/ZnO: Al heterojunction: Effect of Al on junction properties

Al/ZnO: Al heterojunction was fabricated by depositing ZnO: Al film on Al substrate by spray pyrolysis technique at 220 °C substrate temperature. XRD, SEM and EDAX techniques were used to study the properties of thin films. Heterojunction properties were studied by I–V and C–V measurements. The fabricated Al/ZnO: Al junctions were rectifying in character. The room temperature ideality factors of Al/ZnO: Al junctions are found to vary from 2.56 to 5.45. The reverse saturation currents are 5.21 × 10⁻⁹, 1.35 × 10⁻⁶, 1.99 × 10⁻⁶, 9.99 × 10⁻⁷ and 1.02 × 10⁻⁷ A for Al/ZnO: Al junctions. Junction forward current depends on doping concentrations and temperature, whereas reverse saturation current remains independent for Al concentration. The built-in-potential calculated from capacitance for Al/ZnO: Al junctions are 2.74, 2.60, 2.0, 2.50 and 2.43 V corresponding to 1, 2, 3, 4 and 5 mol% of Al. X-ray diffraction study confirmed that the films are polycrystalline, orientated in (0 0 2) plane. Scanning electron microscopy study confirmed circular ring patterns with inside ribbon type structure for Al doped ZnO films.     

Enhancement of room temperature ferromagnetism of Fe-doped ZnO epitaxial thin films with Al co-doping

Epitaxial films of ZnO doped with magnetic ion Fe and, in some cases, with 1% Al show clear evidence of room temperature ferromagnetic ordering. The Al doped optimized samples with carrier concentration n_c∼8.0×10²⁰ cm⁻³ show about 3 times enhanced saturation magnetization (0.58 μ_B/Fe²⁺) than the one with n_c∼3.0×10²⁰ cm⁻³ (0.18 μ_B/Fe²⁺). A clear correlation between the magnetization per transition metal ion and the ratio of the number of carriers to the number of donors have been found as is expected for carrier-induced room temperature ferromagnetism. The transport mechanism of the electrons in all the DMS films at low temperature range has been identified with the Efros's variable range hopping due to the electron-electron Coulomb interaction.     

Effect of indium incorporation in Zn1−xCoxO thin films

In the present paper, the preliminary investigations of a series of ZnO thin films co-doped with indium and cobalt with an objective to elucidate the correlation, if any, between the carrier concentration and the induced room temperature ferromagnetism (RTFM), are presented. The single-phasic (Zn_99.5In_0.5)_1−xCo_xO thin films are deposited by spray pyrolysis. The substitution of Zn²⁺ by Co²⁺ has been established by optical transmission analysis of these films. The films are ferromagnetic at room temperature; and the magnetization has higher value for indium and cobalt co-doped thin film as compared with Zn0₉₀Co_0.1O thin film (having no indium).     

Room temperature ferromagnetic pure ZnO

Pure ZnO films were prepared by pulsed laser deposition on oxidized Si substrates under different oxygen pressure and substrate temperature. Clear room temperature ferromagnetism has been observed in the ZnO film prepared under high vacuum and room temperature. The observation of anomalous Hall effect confirms the intrinsic nature of the ferromagnetism. The photoluminescence and X-ray photoelectron spectroscopy spectra show the high concentration of oxygen vacancies in the ferromagnetic ZnO film. Our results clearly demonstrate the ferromagnetic contribution of the oxygen vacancies mediated by the spin polarized electrons hopping between discrete states in pure ZnO.     

氧空位对钴掺杂氧化锌半导体磁性能的影响

从实验和理论上阐述了氧空位对Co掺杂ZnO半导体磁性能的影响.采用磁控溅射法在不同的氧分压下制备了Zn_095Co_005O薄膜,研究了氧分压对薄膜磁性能的影响.实验结果表明,高真空条件下制备的Zn_095Co_005O薄膜具有室温铁磁性,提高氧分压后制备的薄膜铁磁性逐渐消失.第一性原理计算表明,在Co掺杂ZnO体系中引入氧空位有利于降低铁磁态的能量,铁磁态的稳定性与氧空位和Co之间的距离密切相关. 关键词： Co掺杂ZnO 稀磁半导体 第一性原理计算 氧空位缺陷     

Estimate of the Degree of the Spin Polarization of a Ferromagnet from Data on the Superconductor/Ferromagnet Proximity Effect

The superconductor/ferromagnet proximity effect in the Pb/Co₂Cr_1–xFe _x Al bilayer systems has been studied. Thin films of the Heusler alloy Co₂Cr_1–xFe _x Al have been prepared at different substrate temperatures. It has been established using Andreev spectroscopy of point contacts that the degree of spin polarization of conduction electrons in the Heusler alloy is on the order of 30 and 70% for the films prepared at a substrate temperature of 300 and 600 K, respectively. It has been found that the dependence of the superconducting transition temperature on the thickness of the Pb layer at a fixed thickness of the Heusler layer is determined by the degree of spin polarization of the conduction band in the ferromagnetic layer.     

Electrical and optical spectroscopy on ZnO:Co thin films

Magnetic oxide semiconductors, for example the highly transparent and intrinsically n-type conducting zinc oxide doped with the 3d transition metal Co (ZnO:Co), are promising for the emerging field of spintronics [1]. We investigated n-conducting ZnO:Co thin films with a Co content of nominal 0.02, 0.20, or 2.00 at. %. The substitution of Co cations in the tetrahedral sites of wurtzite ZnO with Zn was confirmed at low temperature by the 1.877 eV photoluminescence between crystal field split d-levels of Co²⁺ (d⁷) ions. Based on theoretical studies, it is predicted that the formation of electron levels with zinc interstitials (I_Zn) or hole levels with zinc vacancies (V_Zn) is necessary to induce ferromagnetism, whereas the formation of electron levels with oxygen vacancies (V_O) is detrimental for ferromagnetism in ZnO:Co [2]. Cobalt generates a hole level in ZnO [3]. We investigated the generation of electron levels in n-conducting ZnO:Co in dependence on the Co content by means of deep level transient spectroscopy (DLTS). However, because of the ambiguous categorization of deep defects in n-conducting ZnO (V_O, I_Zn), an optimization of defect-related ferromagnetism in ZnO:Co is not possible at the moment. PACS 78.30.Fs; 91.60.Ed; 91.60.Mk     

Mn和N共掺ZnO稀磁半导体薄膜的研究

使用对Zn₂N₃:Mn薄膜热氧化的方法成功制备了高含N量的Mn和N共掺ZnO的稀磁半导体薄膜.在没有N离子共掺的情况下,ZnO:Mn薄膜的铁磁性非常微弱;如果进行N离子的共掺杂,就会发现ZnO:Mn薄膜在室温下表现出非常明显的铁磁性,饱和离子磁矩为0.23 μ_B—0.61 μ_B.这说明N的共掺激发了ZnO:Mn薄膜中的室温铁磁性,也就是受主的共掺引起的空穴有利于ZnO中二价Mn离子的铁磁性耦合,这和最近的相关理论研究符合很好. 关键词： 磁性半导体 受主掺杂 空穴媒介的铁磁性     

Synthesis and characterization of Ni-doped ZnO: A transparent magnetic semiconductor

We report synthesis of a transparent magnetic semiconductor by incorporating Ni in zinc oxide (ZnO) matrix. ZnO and nickel-doped zinc oxide (ZnO:Ni) thin films (∼60 nm) are prepared by fast atom beam (FAB) sputtering. Both undoped and doped films show the presence of ZnO phase only. The Ni concentration (in at%) as determined by energy dispersive X-ray (EDX) technique is ∼12±2%. Magnetisation measurement using a SQUID magnetometer shows that the Ni-doped films are ferromagnetic, having coercivity (H_c) values 192, 310 and 100 Oe and saturation magnetization (M_s) values of 6.22, 5.32 and 4.73 emu/g at 5, 15 and 300 K, respectively. The Ni-doped film is transparent (>80%) across visible wavelength range. Resistivity of the ZnO:Ni film is ∼2.5×10⁻³ Ω cm, which is almost two orders of magnitude lower than the resistivity (∼4.5×10⁻¹ Ω cm) of its undoped counterpart. Impurity d-band splitting is considered to be the cause of increase in conductivity. Interaction between free charges generated by doping and localized d spins of Ni is discussed as the reason for ferromagnetism in the ZnO:Ni film.     

Co掺杂对ZnO薄膜结构和性能的影响

采用PVA溶胶-凝胶方法，在玻璃衬底上制备了Zn_1-xCo_xO薄膜，利用X射线衍射仪(XRD)研究了不同Co含量对其微结构的影响.采用振动样品磁强计(VSM)测量了Zn_0.88Co_0.12O样品室温下的磁性.采用荧光光谱仪研究了Zn_1-xCo_xO样品室温下的发光特性，分析掺杂含量对其发光性能的影响，发现随着掺杂含量的增加，蓝光发光峰有一定的红移现象. 关键词： PVA方法 ZnO 掺杂     

Giant temperature coefficient of resistance in Co-doped ZnO thin films

A novel high-performance thermistor material based on Co-doped ZnO thin films is presented. The films were deposited by the pulsed laser deposition technique on Si (111) single-crystal substrates. The structural and electronic transport properties were correlated as a function of parameters such as substrate temperature and Co-doped content for Zn_1?x Co _x O (x=0.005,0.05,0.10 and 0.15) to prepare these films. The Zn_1?x Co _x O films were deposited at various substrate temperatures between 20 and 280 °C. A value of 20 %/K for the negative temperature coefficient of resistance (TCR) with a wide range near room temperature was obtained. It was found that both TCR vs. temperature behavior and TCR value were strongly affected by cobalt doping level and substrate temperature. In addition, a maximal TCR value of over 20 %?K^?1 having a resistivity value of 3.6 Ω?cm was observed in a Zn_0.9Co_0.1O film near 260 °C, which was deposited at 120 °C and shown to be amorphous by X-ray diffraction. The result proved that the optimal Co concentration could help us to achieve giant TCR in Co-doped ZnO films. Meanwhile, the resistivities of the films ranged from 0.4 to 270 Ω?cm. A Co-doped ZnO/Si film is a strong candidate of thermometric materials for non-cooling and high-performance bolometric applications.     

Room temperature ferromagnetism in Tb doped ZnO nanocrystalline films

Nanocrystalline Tb doped ZnO films have been prepared by ion-beam sputtering technology. Magnetic property shows that the films are ferromagnetic and the Curie Temperature (T_c) is over room temperature. Structure property investigation indicates that no secondary phase is found in all the films, which suggests that the ferromagnetism is caused by the incorporation of Tb into ZnO lattice. The saturation magnetization of the films are about 0.38 μb/Tb. Electrical property investigation proves that the carriers of the films are strongly localized, which suggests that the ferromagnetism in the film may be caused by the defects in the films.     

Al和Sb共掺对ZnO有序阵列薄膜的结构和光学性能的影响

采用水热合成法在预先生长的ZnO种子层的玻璃衬底上制备出Al和Sb共掺ZnO纳米棒有序阵列薄膜. 通过X射线衍射、扫描电镜、透射电镜和选区电子衍射分析表明:所制备的薄膜由垂直于ZnO种子层的纳米棒组成, 呈单晶六角纤锌矿ZnO结构, 且沿[001]方向择优生长, 纳米棒的平均直径和长度分别为27.8 nm和1.02 μm. Al和Sb共掺ZnO纳米棒有序阵列薄膜的拉曼散射分析表明:相对于未掺杂ZnO薄膜的拉曼振动峰(580 cm^-1), Al和Sb共掺ZnO阵列薄膜的E₁(LO)振动模式存在拉曼位移. 当Al和Sb的掺杂量为3.0at%,4.0at%,5.0at%,6.0at%时, Al和Sb共掺ZnO阵列薄膜的拉曼振动峰的位移量分别为3,10,14,12 cm^-1. E₁ (LO) 振动模式位移是由Al和Sb掺杂ZnO产生的缺陷引起的. 室温光致发光结果表明:掺杂Al和Sb后, ZnO薄膜在545 nm处的发光强度减小,在414 nm处的发光强度增加. 这是由于掺杂Al和Sb后, ZnO薄膜中Zn_i缺陷增加, O_i缺陷减少引起的. 关键词： Al和Sb共掺ZnO薄膜 纳米棒有序阵列 结构表征 拉曼散射     

Characteristics of ZnO:Al thin films co-doped with hydrogen and fluorine

Fluorine and hydrogen co-doped ZnO:Al (AZO) films were prepared by radio frequency (rf) magnetron sputtering of ZnO targets containing 1 wt.% Al₂O₃ on Corning glass at substrate temperature of 150 °C with Ar/CF₄/H₂ gas mixtures, and the structural, electrical and optical properties of the as-deposited and the vacuum-annealed films were investigated. In as-deposited state, films with fairly low resistivity of 3.9-4 × 10⁻⁴ Ω cm and very low absorption coefficient below 900 cm⁻¹ when averaged in 400-800 nm could be fabricated. After vacuum-heating at 300 °C, the minimum resistivity of 2.9 × 10⁻⁴ Ω cm combined with low absorption loss in visible region, which enabled the figure of merit to uplift as high as 4 Ω⁻¹, could be obtained for vacuum-annealed film. It was shown that, unlike hydrogenated ZnO films which resulted in degradation upon heating in vacuum at moderately high temperature, films with fluorine addition could yield improved electrical properties mostly due to enhanced Hall mobility while preserving carrier concentration level. Furthermore, stability in oxidizing environment could be improved by fluorine addition, which was ascribed to the filling effect of dangling bonds at the grain boundaries. These results showed that co-doping of hydrogen and fluorine into AZO films with low Al concentration could be remarkably compatible with thin film solar cell applications.