Y沸石和多级孔Y沸石封装CuPhen配合物催化性能的比较

选用常规Y沸石和经后处理法制备的多级孔Y沸石为主体,采用自由配体法将铜菲咯啉（CuPhen）配合物封装在不同Y沸石中,制备了CuPhen/Y复合催化材料。采用X射线衍射、TEM、紫外-可见光谱、N₂吸附-脱附、ICP和TG等手段对所制备复合催化材料的物化性质进行了较为详细的表征,并对封装在不同Y沸石主体中的铜配合物在不同尺寸大小反应底物中的催化氧化性能进行了比较研究。结果表明,在以双氧水为氧化剂的反应体系中,封装于多级孔Y沸石中的铜配合物在不同环烷烃氧化反应中的催化活性均高于封装在常规Y沸石中的催化活性,体现出多级孔Y沸石更为优越的主体性能。此外,同封装于常规Y沸石中的铜配合物一样,封装在多级孔Y沸石主体中的金属配合物催化剂也具有良好的稳定性。     

碱金属离子对Fe(phen)3/Y催化氧化性能的影响

采用自由配体法,将铁邻菲啰啉(Fe(phen)3)配合物封装在含有不同碱金属阳离子的Y型分子筛中,制备了系列Fe(phen)3/M-Y(M=Li+,Na+,K+和Cs+)催化剂.采用X射线衍射、红外光谱、紫外-可见光谱、热重-差热分析、电感耦合等离子原子发射光谱、N2吸附-脱附以及催化氧化反应考察了碱金属离子对Fe(phen)3/M-Y催化剂物化性质和催化氧化性能的影响.结果表明,交换有不同碱金属离子的Y型沸石中Fe(phen)3的封装量不同,而且Fe(phen)3在Y型沸石中的热稳定性随着碱金属离子半径的增加有所降低,其中Fe(phen)3/Li+-Y具有最高的配合物封装量和热稳定性能.在环己烷或苯乙烯氧化反应中,在较低的反应温度下,Fe(phen)3/K+-Y表现出最高的催化活性,而在较高的反应温度下,Fe(phen)3/Cs+-Y的催化活性最高,碱金属离子对Fe(phen)3/M-Y催化氧化性能的影响是电子效应、空间限制作用和扩散效应的综合结果.     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响. 以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

后处理工艺制备多级孔Ti-BEA沸石及其环氧化催化性能（英文）

基于脱铝多级孔BEA沸石与二氯二茂钛的固相反应,开展了钛掺杂量可调的多级孔Ti-beta后处理工艺制备研究.对制备的多级孔Ti-beta样品的理化性质进行了表征,包括X射线衍射、氮气吸附脱附测试、扫描电镜、透射电镜、紫外可见吸收光谱和紫外拉曼光谱等.结果表明,多级孔BEA沸石具有较好的化学稳定性,脱铝-钛化的后处理过程未对样品多级孔结构产生明显影响.以环己烯和十二烯的烯烃环氧化为探针反应表征了合成多级孔Ti-beta与纯相微孔Ti-beta沸石的催化性能.结果表明,在小分子环己烯的环氧化反应中,多级孔Ti-beta沸石的催化活性(转化率59.4%)与微孔Ti-beta相当(转化率57.9%);但是在较大分子十二烯的催化反应中,多级孔结构Ti-beta材料的催化性能(转化率11.1%)明显优于纯相微孔材料(转化率6.8%),且产物中环氧化物选择性更高(分别为60.3%和37.8%).     

Y型分子筛中对称与不对称Co(II)Salen型席夫碱配合物的结构和催化性能

用自由配体法将对称、不对称Co(II)Salen型席夫碱配合物封装于Y型沸石分子筛的超笼中,并采用FTIR、UV-Vis、热分析和催化技术研究了其空间结构和催化性能.结果表明,被封装于分子筛超笼中的Salen型席夫碱配合物,同样具有未封装配合物的物理化学性能,也没有影响分子筛的框架结构;在以O2作氧化剂,催化苯乙烯环氧化反应中表现了非常高的反应活性和稳定性;金属配合物的量子化学密度泛函计算结果揭示了配合物的催化性能与轨道能量密切相关.     

Y型分子筛中对称与不对称Co(II)Salen型席夫碱配合物的结构和催化性能

用自由配体法将对称、不对称Co(II)Salen型席夫碱配合物封装于Y型沸石分子筛的超笼中, 并采用FTIR、UV- Vis、热分析和催化技术研究了其空间结构和催化性能. 结果表明, 被封装于分子筛超笼中的Salen型席夫碱配合物, 同样具有未封装配合物的物理化学性能, 也没有影响分子筛的框架结构；在以O2作氧化剂, 催化苯乙烯环氧化反应中表现了非常高的反应活性和稳定性；金属配合物的量子化学密度泛函计算结果揭示了配合物的催化性能与轨道能量密切相关.     

MFI分子筛前驱体对Y型沸石分子筛表面的修饰及其催化性质

间、对-甲基异丙苯是生产间、对-苯酚的反应中间体,因此其制备受到国内外广泛关注．ZSM-5,Y型,betn等沸石分子筛和掺杂zn的Al-MCM-41介孔分子筛在此反应中表现出不同的择形性．近年来利用沸石分子筛前驱体自组装技术合成的新型介孔材料已显示出优异的催化性能,     

微乳液法合成沸石/介孔二氧化硅复合微球

利用简单微乳液自组装体系, 制备了介孔二氧化硅与Y型或Ti-MWW沸石晶体复合形成的沸石/介孔二氧化硅微球(ZMMS). 硅源正硅酸四丁酯与阳离子型季铵盐表面活性剂形成稳定的O/W微乳液形成大颗粒, 沸石颗粒由于疏水作用而进入油相, 同时, 季铵盐表面活性剂和正硅酸四丁酯组装形成介孔材料. 优化合成条件可以有效控制复合微球的沸石/介孔二氧化硅质量比(0～2.3)和直径(186～965 μm). 两种沸石/介孔二氧化硅复合微球材料的介孔孔径分别为3.98 nm(Y型沸石)和3.75 nm (Ti-MWW型沸石). Ti-MWW沸石/介孔二氧化硅复合微球在液相催化环氧化反应中表现出良好的机械强度, 并且能够达到与Ti-MWW沸石原粉相当的催化活性.     

铜配合物在Y型分子筛超笼中的组装及其催化苯酚羟化活性

 详尽介绍了通过分步法，在Y型分子筛超笼中制备铜（II）- 1，10菲咯啉和8-羟基喹啉配合物（简称CuPhen/Y，CuOx/Y）的过程；活性评价结果显示同Cu/Y相比，以H2O2为氧化剂，CuPhen/Y，CuOx/Y具有特殊的催化苯酚羟化功能。     

多级孔钛硅分子筛的制备及应用进展

以钛硅分子筛(TS-1)为催化剂的选择性催化氧化工艺具有反应条件温和、产物选择性高及环境污染小等特点,促进了烃类催化氧化反应的绿色化发展.但常规TS-1分子筛狭窄的孔道限制了其在大分子催化氧化反应中的应用.多级孔TS-1分子筛为包含不同尺度的孔道结构的晶体沸石,兼具微孔分子筛晶体优异的水热稳定性和介孔材料优异的扩散传输性能,因此其受到国内外众多专家学者的广泛关注.多级孔TS-1分子筛的制备方法很多,主要有直接合成法和后处理法,其中直接合成法包括硬模板法、软模板法和自组装法,而后处理制备主要为碱处理法.我们在对多级孔TS-1分子筛制备方法进行归纳总结的基础上,探讨不同制备方法对分子筛中钛硅物种分布、孔道结构及催化烃类选择性氧化反应性能的影响.结合目前TS-1分子筛应用现状,对其未来发展进行展望.     

以煤矸石为原料合成Y型沸石及其吸附性能的探究

以固体废物煤矸石为原料,采用“高温焙烧活化 碱熔融 碱溶 陈化 晶化”水热反应体系,根据Y型沸石相应的结构特征,通过对各阶段反应条件的探究及对SiO₂/Al₂O₃的摩尔比的控制,合成Y型沸石,其结构、形貌和性能经X-射线荧光光谱、X-射线衍射、扫描电子显微镜、Fourier红外光谱和氮吸附仪分析表征。并将Y型沸石应用于氨氮废水的处理,对其吸附性能进行研究。结果表明,在活化温度800 ℃,碱熔融温度850 ℃,碱熔融质量比（Na₂CO₃/煤矸石）为1.0,碱溶NaOH溶液浓度为3 mol·L^-1,于60 ℃陈化12 h,晶化温度105 ℃,晶化时间6 h条件下,硅铝比为6~8,制得的Y型沸石结晶度最高（93％）,对氨氮废水的去除率在40 min内达到88.2%。     

Zeolite-Y enslaved manganese(III) complexes as heterogeneous catalysts

Traditional catalytic procedures for oxidation of phenol produce environmentally undesirable wastes. As a consequence, there is a clear demand for development of an environmentally benign catalytic route for the selective oxidation of phenol. A series of zeolite-Y enslaved Mn(III) complexes with Schiff bases derived from vanillin furoic-2-carboxylic acid hydrazone (VFCH), vanillin thiophene-2-carboxylic acid hydrazone (VTCH), ethylvanillin thiophene-2-carboxylic acid hydrazone (EVTCH), and/or ethylvanillin furoic-2-carboxylic acid hydrazone have been synthesized and characterized by physico-chemical techniques. Catalytic oxidations of phenol using 30% H₂O₂ as an oxidant over [Mn(VTCH)₂·2H₂O]⁺-Y, [Mn(VFCH)₂·2H₂O]⁺-Y, and [Mn(EVTCH)₂·2H₂O]⁺-Y under mild conditions were studied. These zeolite-Y enslaved Mn(III) complexes are stable and recyclable under current reaction conditions.     

Zeolite-Y entrapped bivalent transition metal complexes as hybrid nanocatalysts: density functional theory investigation and catalytic aspects

The intriguing research toward the exploitation of zeolite-Y-based hybrid nanocatalysts for catalytic oxidation reactions has been growing significantly. In the present investigation, we describe the synthesis of zeolite-Y entrapped transition metal complexes of the general formulae [M(SFCH)·xH₂O]-Y (where, M = Mn, Fe, Co, Ni (x = 3) and Cu (x = 1)); H₂SFCH = (E)-N′-(2-hydroxybenzylidene)furan-2-carbohydrazide]. These nanocatalysts have been characterized by various physicochemical techniques. Density functional theory calculations are performed to address the relaxed geometry, bond angle, bond length, dihedral angle, highest occupied molecular orbital (HOMO)–lowest unoccupied molecular orbital (LUMO) energy gap, and electronic density of states of H₂SFCH ligand and their neat transition metal complexes. The observed HOMO–LUMO gap and the Fermi energy is higher for Cu(II) complexes, which demonstrates the better catalytic activity of this nanocatalyst. The catalytic activity was performed in liquid-phase oxidation of cyclohexane using hydrogen peroxide as oxidant to give cyclohexanone (CyONE) and cyclohexanol (CyOL). Among them, [Cu(SFCH)·H₂O]-Y catalyst has the highest selectivity toward CyONE (84.5%).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.