B NMR investigations in xV2O5–B2O3 and xV2O5–B2O3–PbO glasses

11B (I=3/2) MAS NMR in the binary glass system xV₂O₅–B₂O₃ (x=0.053, 0.43) and the ternary glass system xV₂O₅–B₂O₃–PbO (0.1x1.5) has been investigated at room temperature. In the xV₂O₅–B₂O₃ glasses, one NMR line due to BO₃ unit was observed. Meanwhile in the xV₂O₅–B₂O₃–PbO, two NMR lines which arise from BO₃ and BO₄ units were detected, where the appearance of BO₄ units is produced by the presence of PbO. From the computer-simulation of the ¹¹B NMR central transition line (m=−1/2↔1/2), the quadrupole parameters (e²qQ/h and η) for BO₃ units in xV₂O₅–B₂O₃, and those for BO₃ and BO₄ units in xV₂O₅–B₂O₃–PbO were obtained as a function of x. As the V₂O₅ content increases in xV₂O₅–B₂O₃–PbO, the e²qQ/h and η values of the BO₃⁻ associated resonance are found to slightly decrease and increase, respectively. Meanwhile, the e²qQ/h and η values of BO₄⁻ associated resonance in xV₂O₅–B₂O₃–PbO are found to slightly increase and decrease, respectively. By comparing the intensities of the total transitions (m=−3/2↔−1/2,m=−1/2↔1/2, and 1/2↔3/2) for the ¹¹B NMR line of BO₃ and BO₄ units contained in xV₂O₅–B₂O₃–PbO with those of respective standard samples of 0.053V₂O₅–B₂O₃ and NaBH₄, the quantitative fractions of BO₃ and BO₄ in xV₂O₅–B₂O₃–PbO were obtained as a function of x.     

Internal friction in vanadium-phosphate glasses doped with Na2O

The internal friction of _xNa₂O·(0.5−x)V₂O₅·O.5P₂O₅(x = 0.025–0.3) glasses was studied using the low-frequency torsion pendulum technique. The temperature spectrum of internal friction reveals three maxima. Maximum 1, the so-called “electron” maximum, is the same as observed in binary vanadium-phosphate glasses. The origin of maximum 2 can be attributed to ion migration. Maximum 3 appears for glasses containing more than 10 mol.% Na₂O and is probably connected with sodium-proton interactions.     

Vapor phase epitaxy of pure VO2 and V1−xCrxO2

The vapor phase epitaxy of thin epilayers of VO₂ and V_1−xCrxO₂ on TiO₂ transparent substrates is described. Chemical vapor deposition occurs by reacting a (VOCL₃/CrO₂Cl₂/H₂O/H₂) mixture at about 800°C using argon as a carrier gas. The preparation of pure VO₂ requires special care to make it homogeneously stoichiometric and to obtain steep concentration profiles at the TiO₂/VO₂ interface. Layers were obtained which had electrical and optical properties comparable to the best bulk crystals grown by other techniques. Homogeneous solid solutions of V_1−xCr_xO₂ epilayers were also grown for the first time in the range o < x < 0.17. Chromium concentration and homogeneity were determined by electron microprobe analysis. The separation coefficient k was also found to vary with x. It is close to unity below x = 0.001 and above this value Cr is incorporated more easily. High quality heteroepitaxial layers (1 cm² area, 1 to 30 μm thickness) of V_1−xCr_xO₂ have for the first time allowed the measurement of the optical absorption coefficient.     

Preparation and physical properties of amorphous V2O5 containing TiO2, Na2O or Li2O

V₂O₅ gels containing up to 18 mol% of TiO₂ were obtained through the simultaneous hydrolysis of alkoxides in ethanol solution. V₂O₅ gels containing Na₂O or Li₂O were obtained through the ion exchange method. The crystallization temperature, T_cr, of the gels increased and the H₂O content of the gels decreased by the addition of TiO₂ or Na₂O. These additives seem to stabilize the amorphous state of the gels. On the other hand, T_cr and the H₂O-content slightly varied with the addition of Li₂O. No ionic polarization was observed in coating films of the gels dried at temperatures below T_cr. The dc conductivity of the films was anisotropic, and increased with the addition of Li₂O or Na₂O. However, it decreased with increasing TiO₂ content. The fiber-like structure of gels was observed by TEM. The gels obtained from alkoxides were thin and short in comparison with the gels obtained through the ion exchange method.     

Hydrothermal growth of single-crystal CaV6O16·3H2O nanoribbons

CaV₆O₁₆·3H₂O nanoribbons have been prepared by the hydrothermal method in the presence of sodium dodecyl sulfate (SDS) at 160°C for 10 h. X-ray diffraction pattern indicates that the sample is monoclinic phase of CaV₆O₁₆·3H₂O with the lattice contents a=12.18 Å, b=3.598 Å, c=18.39 Å, β=118.03°. Field emission scanning electron microscopy shows that the nanoribbons have widths in the range of 150–500 nm, thicknesses of 30–60 nm and lengths of 500 mm X-ray photoelectron spectrum measurements further confirm the formation of the CaV₆O₁₆·3H₂O phase. The formation of CaV₆O₁₆·3H₂O nanoribbons is a self-assembling process, in which surfactant SDS plays the role of soft template.     

Mechanochemical metathesis synthesis and characterization of nano-structured MnV2O6·xH2O (x=2, 4)

A solid-state metathesis approach for the synthesis of hydrated MnV₂O₆·xH₂O (x=2, 4) materials driven by mechanochemical activation energy has been demonstrated. The metathesis pathway of forming the desired product is confirmed by the presence of high lattice energy by-product such as NaCl. The structural, optical, and chemical properties of the synthesized materials are examined by powder X-ray diffraction, X-ray photoelectron spectroscopy, thermo gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and diffused reflectance measurements in the UV–vis range. The valence state of Mn and V was determined to be +2 and +5, respectively, for the title compounds and the bandgap values determined showed these materials are likely to be semiconductors.     

Small-angle X-ray scattering studies of a-Si1−xGex: H alloys

Small-angle X-ray scattering (SAXS) is used to study a-Si:H, a-Ge:H, and a-Si_1−xGe_x: H alloys prepared by plasma-enhanced CVD methods. These amorphous semiconductors show various types of scattering characteristics related to their composition, deposition method, and deposition conditions. For poor quality alloys at low scattering vectors, h, the scattering curve shows an I(h)h⁻² dependence, because of the fractal nature of the inhomogeneities present. Also, a-Ge:H shows these features. Therefore, it is concluded that the inhomogeneities arise principally from clustering of Ge atoms.     

Characterisation of semiconducting V2O5–Bi2O3–TeO2 glasses through ultrasonic measurements

Tellurite containing vanadate (50−x)V₂O₅–xBi₂O₃–50TeO₂ glasses with different bismuth (x=0, 5, 10, 15, 20 and 25 wt%) contents have been prepared by rapid quenching method. Ultrasonic velocities (both longitudinal and shear) and attenuation (for longitudinal waves only) measurements have been made using a transducer operated at the fundamental frequency of 5 MHz in the temperature range from 150 to 480 K. The elastic moduli, Debye temperature, and Poisson’s ratio have been obtained both as a function of temperature and Bi₂O₃ content. The room temperature study on ultrasonic velocities, attenuation, elastic moduli, Poisson’s ratio, Debye temperature and glass transition temperature show the absence of any anomalies with addition of Bi₂O₃ content. The observed results confirm that the addition of Bi₂O₃ modifier changes the rigid formula character of TeO₂ to a matrix of regular TeO₃ and ionic behaviour bonds (NBOs). A monotonic decrease in velocities and elastic moduli, and an increase in attenuation and acoustic loss as a function of temperature in all the glass samples reveal the loose packing structure, which is attributed to the instability of TeO₄ trigonal bipyramid units in the network as temperature increases. It is also inferred that the glasses with low Bi₂O₃ content are more stable than with high Bi₂O₃ content.     

Crystallization behavior and hydrophilic performances of V2O5–TiO2 films prepared by sol–gel dip-coating

Homogeneous and transparent V₂O₅–TiO₂ composite nanometer thin films were prepared on glass substrates by sol–gel processing and dip-coating technique. The films as well as the dried powder of bulk gel were characterized by different techniques like X-ray diffraction (XRD), high-resolution scanning electron microscopy (HRSEM), atomic force microscope (AFM) and thermogravimetry–differential thermal analysis (TG–DTA). The hydrophilicity of the films was determined by measuring the water contact angles on the films. The results showed that the dopant of V₂O₅ on TiO₂ thin films could produce a visible-light response to the films, and the introduction of V₂O₅ could suppress the structural phase transition and crystal growth of TiO₂ crystal. Finally, the relationship between crystalline size and hydrophilicity under sunlight was investigated in this article.     

Mössbauer studies on some glasses and crystals in the Na2O---Fe2O3---SiO2 system

Mössbauer absorption measurements have been made at room temperature on ⁵⁷Fe in iron sodium silicate glasses containing 3–15 mol% Fe₂O₃ and various iron alkali silicate crystals in order to study the state of iron in these glasses. The spectra of all the glasses gave one doublet with a quadrupole splitting varying from 0.73–0.78 mm s⁻¹, while those of Na₂O · Fe₂O₃ · 4 SiO₂ and 5 Na₂O · Fe₂O₃ · 8 SiO₂ crystals showed much smaller quadrupole splitting, 0.28 mm s⁻¹ and 0.10 mm s⁻¹, respectively, and an asymmetrical doublet of much narrower linewidth. When sodium was replaced by other alkali metals of larger size, such as K and Cs, in MFeSi₂O₆ and MFeSi₃O₈ crystals, the quadrupole splitting became wider and approached to 0.73 mm s⁻¹. Such a variation was not observed for glasses. These results suggest that a larger number of non-identical sites exist in iron sodium silicate glasses than in the corresponding crystals.     

Structural and thermal properties of some tellurite glasses

Tellurium oxide glasses were prepared by the hammer and anvil technique. The glass systems are (0.85TeO₂ + 0.15Z), where Z = K₂O, TiO₂, V₂O₅, MnO, Fe₂O₃, CoO, NiO or CuO. A second group is a ternary system 0.85TeO₂+(0.15 − x)TiO₂ + xFe₂O₃) with x=0.0, 0.05, 0.1, 0.15 mol. X-ray diffraction, infrared spectroscopy and differential thermal analysis measurements were carried out. The present study showed the different glass-forming groups, the glass transition and crystallization temperatures as well as the crystallization processes.     

Toughened glass-ceramics containing ZrO2 and Al2O3 prepared by the sol-gel process from metal alkoxides

Glasses of compositions 5ZrO₂·5SiO₂(ZS), 5ZrO₂·Al₂O₃·4SiO₂(ZAS) and 5 5ZrO₂·0.5Al₂O₃·0.5Na₂O·4SiO₂(ZANS) were prepared by the sol-gel process from metal alkoxides and sintered to make glass-ceramics. Tetragonal ZrO₂ was precipitated by heat treatment at 900 to 1300°C. The activation energy for tetragonal ZrO₂ crystal growth was extremely high in Al₂O₃ containing glasses. ZAS and ZS were sintered to the near theoretical densities above 1200°C, at which the predominant phase was tetragonal ZrO₂. On the other hand, for ZANS, high densification was not attained owing to the large pores enclosed by the glass phase. Strength and fracture toughness increased with the densification and the crystal growth of tetragonal ZrO₂, reaching 450 MPa and 9 MN/m^1.5, respectively.     

Nuclear magnetic resonance studies of alkaline earth phosphosilicate and aluminoborosilicate glasses

The ¹¹B, ²⁷Al, ²⁹Si and ³¹P magic angle spinning (MAS) NMR spectra of MO–P₂O₅, MO–SiO₂–P₂O₅ and MO(M^′₂O)–SiO₂–Al₂O₃–B₂O₃ (M=Mg, Ca, Sr and Ba, M^′=Na) glasses were examined. In binary MO–P₂O₅ (M=Ca and Mg) glasses, the distributions of the phosphate sites, P(Q_n), can be expressed by a theoretical prediction that P₂O₅ reacts quantitatively with MO. In the ternary 0.30MO–0.05SiO₂–0.65P₂O₅ glasses, the 6-coordinated silicon sites were detected, whose population increases in the order of MgOxCaO–0.05SiO₂–(0.95−x)P₂O₅ glasses, its population increases with an increase in f (=([P₂O₅]−[MO]−[B₂O₃]−[Na₂O])/[SiO₂]) and has maximum at f=9. The signal due to the 5-coordinated silicon atoms is also observed when x is smaller than 0.45. When three network-forming oxides such as SiO₂, Al₂O₃ and B₂O₃ coexist, Al₂O₃ reacts preferably with MO. The populations of 4-coordinated boron atoms, N₄, are expressed well with r/(1−r), where r=([Na₂O]−[Al₂O₃])/([Na₂O]−[Al₂O₃]+[B₂O₃]). The correlation of the Raman signal at 1210 and 1350 cm⁻¹ with the NMR signal of Si(Q₆) at −215 ppm is also seen.     

Viscosity and IR investigations in the Li2O---B2O3 system

The high viscosity in melts of the Li₂O---B₂O₃ system makes it very difficult to grow large crystals of lithium triborate. The viscosity and IR characteristics of molten li₂O---B₂O₃ system are reported in this paper. When the temperature increases the viscosity of li₂O---B₂O₃ system decreases and follows an Arrhenius-type relationship. With an increasing 13203 ratio in Li₂O---B₂O₃ melts, the viscosity rises gradually to a maximum with a composition Li₂O: 3.513203 then it falls rapidly. In order to find active agents to reduce the viscosity, Na₂O, NaCl, LiF, P205, M003, W03 etc oxides were added to Li₂O---B₂O₃ samples respectively and investigated using the orthogonal method. The experimental results show that the addition of acidic oxides can significantly decrease the viscosity in the Li₂O---B₂O₃ system. For Li₂O: 4.513203, an ideal additive agent is 20wt% Li₂O:: 2MoO₃. Near the composition for crystal growth, the percentage reduction of viscosity is 62.2%. The IR spectra of Li₂O---B₂O₃ system revealed that the BO₄⁻/NO₃⁻ ratio is reduced in the melt using Li₂O: 2MoO₃ as an additive. It is proposed that the M003 reduced the concentration of bridging oxygen atoms of BO₄⁻. The change of structure explains the decline in the viscosity. In the crystal structures of lithium triborate, the matrix spaces are so small that larger other cations than Li+ are very difficult to enter the crystal matrix. So the use of additive agents to reduce the viscosity is a possible method if no new phase appears.     

Hydrolysis and condensation reactions of Si(OC2H5)4 related to silica fiber drawing

The hydrolysis and condensation reactions of Si(OC₂H₅)₄ (TEOS) at 80°C in the TEOS---H₂O---C₂H₅OH---HCl solutions with H₂O/TEOS molar ratios (r) from 1.0 to 2.0 were followed by gas chromatography (GC) and measurement of molecular weight ( ) of the hydrolyzates, in order to explain the viscosity change of the solutions. It has been found that the siloxane oligomers with average polymerization degree (n) from 2 to 7 are formed in the early stage of reaction and undergo condensation to form higher polymers. The n and the number of silanol groups of the oligomers are increased with increasing r. The fact that the solution viscosity increased once rapidly around the so-called gelation point followed by a sluggish increase with the increase of reaction time for an r of 1.7, while it increased rapidly without a break till gelation for an r of 2.0, was attributed to fewer silanol groups and higher steric hindrance as a result of more −OC₂H₅ groups remaining in the oligomers for an r of 1.7.     

Hydrolytic resistance of Na2O---B2O3---SiO2 gels prepared by sol-gel process

Alkoxide derived gels were prepared in the system Na₂O---B₂O₃---SiO₂. The gel compositions were situated in the liquid-liquid immiscibility area of the phase equilibrium diagram.

Hydrolytic resistance tests were performed on the gels heat-treated at temperatures ranging between 120 to 850 °C. The Na₂O, B₂O₃ and SiO₂ extracted from the attack gels were analyzed. The experimental results indicate that the amount of B₂O₃ has a significant influence on the chemical durability of the heat-treated gels. At temperatures of 850 °C the greater the B₂O₃ mol% the greater are the amounts of Na₂O and B₂O₃ extracted. Different behaviour was observed for gels heat-treated at 600 °C where the amounts of B₂O₃ and Na₂O extracted slightly increases as the B₂O₃ mol% increases. Small amounts of extracted SiO₂ were always observed.

These results are complemented with other measurements so that an explanation of the controlling mechanism is given.     

XAS study of lanthanum coordination environments in glasses of the system K2O---SiO2---La2O3

The La L₁ and L₃ XANES and L₃ EXAFS have been investigated for the series of glasses 10K₂O---50SiO₂---x La₂O₃ (x = 1, 5, 10) and (10 − x)K₂O---40SiO₂−(x/3)La₂O₃ (x = 7.5, 5, 2.5) and model compounds La₂O₃, LaAlO₃, LaPO₄, La₂NiO₄, La₂CuO₄ and La(OH)₃. An edge resonance at 25 eV above the L₁ edge in the glass spectra is concentration-dependent, decreasing in intensity with increasing lanthanum concentration. The 2s → nd forbidden transition increases with La₂O₃ concentration, indicating a reduction in the ‘average’ site symmetry of the first coordination shell of La. Mapping _X(k) space, which is a new and promising technique, was employed to extract bond distance, coordination number and thermal parameters from the EXAFS. By this method, one calculates the complete _X(k) space a function of all physically reasonable values of the adjusted parameters in all possible combinations. The advantage in this method is the assurance of a global minimum. Bond lengths were comparable to those obtained by Fourier transforming the phase corrected EXAFS. The values are 2.42 Å (± 0.03 Å) for La---O. The coordination numbers (N ≤ 7 ± 1.5) were derived by mapping and comparison to the published structures for other La compounds. _X(k) mapping is compared with least-squares fitting the data, and the correlation between the Debye-Waller factor and coordination number is also discussed.     

An X-ray diffraction study of the structure of B2O3---Cs2O liquids

The short range structures of B₂O₃ (90 mol%)---Cs₂O (10 mol%) and B₂O₃ (80 mol%)---Cs₂O (20 mol%) liquids were analyzed at 973 and 1053 K, respectively, by an X-ray diffraction method, and the effects of Cs₂O addition on the boron-oxygen bonding were investigated. The existence of BO₃ triangles, which form the so-called boroxol ring structure, was confirmed in B₂O₃---Cs₂O liquids, as well as in B₂O₃ liquid, but some fraction of the BO₃ triangles was thought to be converted to BO₄ tetrahedra. Similar results have previously been observed also in B₂O₃---Cs₂O glasses. A Cs atom was found to be surrounded by six O atoms; four Cs---O interatomic distances were about 3.2 Å but the other two were at 3.8–3.9 Å. These distances indicate that distorted Cs---O octahedra may exist in these B₂O₃---Cs₂O liquids.     

NMR studies of Na2O---B2O3---SiO2 glasses of mid-alkali content

¹¹B Fourier transform spectra have been used to study the structure of Na₂O---B₂O₃---SiO₂ glasses of mid-alkali content. Based on the measurements of the fraction N₄ of four-coordinated borons, it has been found that for K = mol.% SiO₂/mol.% B₂O₃ 8 and R = mol.% Na₂O/mol.% B₂O₃ = 1, N₄ is obviously smaller than 1 rather than equal to 1 as assumed in the relevant literature. Only when R reaches a value appropriately greater than 1, can the case where N₄ = 1 occur. A structural model suggested in this paper can satisfactorily explain the fact.     

Characterization of different ice habits according to nucleation processes in the electrolyte LiCl · RH2O (6 < R < 9)

The ability to observe different ice nucleation processes in LiCl · RH₂O electrolytes is demonstrated by light scattering experiments. The homogeneous ice nucleation mechanism is analyzed on the basis of Turnbull's theory. This nucleation operates in supercooled water, as deduced from the volumic dependence of the samples on R(5 < R < 9), and is compatible with the definition of the electrolyte as a heterogeneous submicroscopic LiCl·6H₂O medium composed of H₂O and LiCl·6H₂O.