The strong NP-hardness of the maximum lateness minimization scheduling problem with the processing-time based aging effect

In this paper, we analyse the single machine maximum lateness minimization scheduling problem with the processing time based aging effect, where the processing time of each job is described by a non-decreasing function dependent on the sum of the normal processing times of preceded jobs. The computational complexity of this problem was not determined. However, we show it is strongly NP-hard by proving the strong NP-hardness of the single machine maximum completion time minimization problem with this aging model and job deadlines. Furthermore, we determine the boundary between polynomially solvable and NP-hard cases.     

基于重新排序的退化工件最小化总延误时间问题

考虑了错位限制下的含有退化工件的重新排序问题,即工件的实际加工时间看作是工件开工时间的线性函数．重新排序就是在原始工件已经按照某种规则使目标函数达到最优时有一新工件集到达,新工件的安排使得原始工件重新排序进而产生错位．研究了最大序列错位和总序列错位限制下的退化工件最小化总延误时间问题,其最优排序的结构性质是使得原始工件集和新工件集中的工件是按加工率αj非减的序列排列,基于此通过分阶段排序和动态规划方法给出了两个问题的多项式时间的最优算法．     

No-wait or no-idle permutation flowshop scheduling with dominating machines

In this paper we study the no-wait or no-idle permutation flowshop scheduling problem with an increasing and decreasing series of dominating machines. The objective is to minimize one of the five regular performance criteria, namely, total weighted completion time, maximum lateness, maximum tardiness, number of tardy jobs and makespan. We establish that these five cases are solvable by presenting a polynomial-time solution algorithm for each case.     

Scheduling jobs with release dates on parallel batch processing machines

In this paper we consider the problem of scheduling jobs with release dates on parallel unbounded batch processing machines to minimize the maximum lateness. We show that the case where the jobs have deadlines is strongly NP-hard. We develop a polynomial-time approximation scheme for the problem to minimize the maximum delivery completion time, which is equivalent to minimizing the maximum lateness from the optimization viewpoint.     

带有退化效应和序列相关运输时间的排序问题

考虑带有退化效应和序列相关运输时间的单机排序问题. 工件的加工时间是其开工时间的简单线性增加函数. 当机器单个加工工件时, 极小化最大完工时间、(加权)总完工时间和总延迟问题被证明是多项式可解的, EDD序对于极小化最大延迟问题不是最优排序, 另外, 就交货期和退化率一致情形给出了一最优算法. 当机器可分批加工工件时, 分别就极小化最大完工时间和加权总完工时间问题提出了多项式时间最优算法.     

Approximation algorithms for problems in scheduling with set-ups

In this paper, we present new approximation results for the offline problem of single machine scheduling with sequence-independent set-ups and item availability, where the jobs to be scheduled are independent (i.e., have no precedence constraints) and have a common release time.We present polynomial-time approximation algorithms for two versions of this problem. In the first version, the input includes a weight for each job, and the goal is to minimize the total weighted completion time. On any input, our algorithm produces a schedule whose total weighted completion time is within a factor 2 of optimal for that input.In the second version, the input includes a due date for each job, and the goal is to minimize the maximum lateness of any job. On any input, our algorithm produces a schedule with the following performance guarantee: the maximum lateness of a job is at most the maximum lateness of the optimal schedule on a machine that runs at half the speed of our machine.     

Scheduling time-dependent jobs under mixed deterioration

We consider a new model of time-dependent scheduling. A set of deteriorating jobs has to be processed on a single machine which is available starting from a non-zero time. The processing times of some jobs from this set are constant, while other ones are either proportional or linear functions of the job starting times. The applied criteria of schedule optimality include the maximum completion time, the total completion time, the total weighted completion time, the maximum lateness and the number of tardy jobs. We delineate a sharp boundary between computationally easy and difficult problems, showing polynomially solvable and NP-hard cases.     

Single-machine scheduling with a sum-of-actual-processing-time-based learning effect

In this paper we consider the single-machine scheduling problems with a sum-of-actual-processing-time-based learning effect. By the sum-of-actual-processing-time-based learning effect, we mean that the processing time of a job is defined by a function of the sum of the actual processing time of the already processed jobs. We show that even with the introduction of the sum-of-actual-processing-time-based learning effect to job processing times, the makespan minimization problem, the total completion time minimization problem, the total completion time square minimization problem, and some special cases of the total weighted completion time minimization problem and the maximum lateness minimization problem remain polynomially solvable, respectively.     

Machine scheduling with a rate-modifying activity

Motivated by a problem commonly found in electronic assembly lines, this paper deals with the problem of scheduling jobs and a rate-modifying activity on a single machine. A rate-modifying activity is an activity that changes the production rate of the equipment under consideration. Hence the processing times of jobs vary depending on whether the job is scheduled before or after the rate-modifying activity. The decisions under consideration are when to schedule the rate-modifying activity and the sequence of jobs to optimize some performance measure.In this paper, we develop polynomial algorithms for solving problems of minimizing makespan, and total completion time respectively. We also develop pseudo-polynomial algorithms for solving problems of total weighted completion time under the agreeable ratio assumption. We prove that the problem of minimizing maximum lateness is NP-hard and also provide a pseudo-polynomial time algorithm to solve it optimally.     

Scheduling two agents with controllable processing times

We consider several two-agent scheduling problems with controllable job processing times, where agents A and B have to share either a single machine or two identical machines in parallel while processing their jobs. The processing times of the jobs of agent A are compressible at additional cost. The objective function for agent B is always the same, namely a regular function _fmax$f_{\text{max}}$. Several different objective functions are considered for agent A, including the total completion time plus compression cost, the maximum tardiness plus compression cost, the maximum lateness plus compression cost and the total compression cost subject to deadline constraints (the imprecise computation model). All problems are to minimize the objective function of agent A subject to a given upper bound on the objective function of agent B. These problems have various applications in computer systems as well as in operations management. We provide NP-hardness proofs for the more general problems and polynomial-time algorithms for several special cases of the problems.     

考虑部分工件不可打扰的多任务调度问题研究

多任务调度问题存在于各种应用领域,如因特网服务领域,医疗领域等。经典的多任务调度模型中所有工件均可被其他等待工件打扰,且仅打扰一次。然而在生产实践过程中,有些紧急工件是不允许被其他工件打扰。在此启发下,对原有模型进行扩展,研究了在单机多任务环境下部分工件不可打扰的调度问题,模型目标包括最小化最大完工时间,最小化总完工时间,最小化最大延迟以及最小化加权提前期、拖延期和共同交货期之和。对于前三个目标给出了精确算法,对于最后一个目标给出了启发式算法。最后,对今后的研究提出了建议。     

Learning effect and deteriorating jobs in the single machine scheduling problems

This paper studies the single machine scheduling problems with learning effect and deteriorating jobs simultaneously. In this model, the processing times of jobs are defined as functions of their starting times and positions in a sequence. It is shown that even with the introduction of learning effect and deteriorating jobs to job processing times, the makespan, the total completion time and the sum of the k$k$th power of completion times minimization problems remain polynomially solvable, respectively. But for the following objective functions: the total weighted completion time and the maximum lateness, this paper proves that the shortest weighted processing time first (WSPT) rule and the earliest due-date first (EDD) rule can construct the optimal sequence under some special cases, respectively.     

On single processor scheduling problems with learning dependent on the number of processed jobs

The importance of the role that learning plays in manufacturing, industry and computer systems is undeniable as well as the profit that can be increased if this phenomenon is taken into consideration for short- and long-term optimization. In this paper, we focus on scheduling jobs on a single processor, where its effectiveness can increase with the number of processed jobs, to minimize one of the following objectives: the maximum completion time with the release dates, the maximum lateness and the number of late jobs. It is proved that these well known polynomially solvable problems become at least NP-hard with the considered learning models. To solve them we provide some elimination procedures that are used to construct a branch and bound algorithm. Furthermore, we propose some fast heuristics for the problem of minimizing the number of late jobs with the general model of the learning effect.     

Fabrication scheduling on a single machine with due date constraints

There is a fabrication machine available for processing a set of jobs. Each job is associated with a due date and consists of two parts, one is common among all products and the other is unique to itself. The unique components are processed individually and the common parts are grouped into batches for processing. A constant setup time is incurred when each batch is formed. The completion time of a job is defined as the time when both of its unique and common components are completed. In this paper, we consider two different objectives. The first problem seeks to minimize the maximum tardiness, and the second problem is to minimize the number of tardy jobs. To minimize the maximum tardiness, we propose a dynamic programming algorithm that optimally solves the problem in polynomial time. Next, we show NP-hardness proof and design a pseudo-polynomial time dynamic programming algorithm for the problem of minimizing the number of tardy jobs.     

Single machine past-sequence-dependent setup times scheduling with general position-dependent and time-dependent learning effects

In this paper we consider the single machine past-sequence-dependent (p-s-d) setup times scheduling problems with general position-dependent and time-dependent learning effects. By the general position-dependent and time-dependent learning effects, we mean that the actual processing time of a job is not only a function of the total normal processing times of the jobs already processed, but also a function of the job’s scheduled position. The setup times are proportional to the length of the already processed jobs. We consider the following objective functions: the makespan, the total completion time, the sum of the θth (θ ? 0) power of job completion times, the total lateness, the total weighted completion time, the maximum lateness, the maximum tardiness and the number of tardy jobs. We show that the problems of makespan, the total completion time, the sum of the θth (θ ? 0) power of job completion times and the total lateness can be solved by the smallest (normal) processing time first (SPT) rule, respectively. We also show that the total weighted completion time minimization problem, the maximum lateness minimization problem, maximum tardiness minimization problem and the number of tardy jobs minimization problem can be solved in polynomial time under certain conditions.     

Scheduling problems with two competing agents to minimize minmax and minsum earliness measures

A relatively new class of scheduling problems consists of multiple agents who compete on the use of a common processor. We focus in this paper on a two-agent setting. Each of the agents has a set of jobs to be processed on the same processor, and each of the agents wants to minimize a measure which depends on the completion times of its own jobs. The goal is to schedule the jobs such that the combined schedule performs well with respect to the measures of both agents. We consider measures of minmax and minsum earliness. Specifically, we focus on minimizing maximum earliness cost or total (weighted) earliness cost of one agent, subject to an upper bound on the maximum earliness cost of the other agent. We introduce a polynomial-time solution for the minmax problem, and prove NP-hardness for the weighted minsum case. The unweighted minsum problem is shown to have a polynomial-time solution.     

Single-machine scheduling with effects of exponential learning and general deterioration

The purpose of this study is to explore the single-machine scheduling with the effects of exponential learning and general deterioration. By the effects of exponential learning and general deterioration, we meant that job processing time is decided by the functions of their starting time and positions in the sequence. Results showed that with the introduction of learning effect and deteriorating jobs to job processing time, single-machine makespan, and sum of completion time (square) minimization problems remained polynomially solvable, respectively. But for the following objective functions: the weighted sum of completion time and the maximum lateness, this paper proved that the weighted smallest basic processing time first (WSPT) rule and the earliest due date first (EDD) rule constructed the optimal sequence under some special cases, respectively.     

Single-machine scheduling problems with time and position dependent processing times

We consider single-machine scheduling problems with time and position dependent job processing times. In many industrial settings, the processing time of a job changes due to either job deterioration over time or machine/worker’s learning through experiences. In the models we study, each job has its normal processing time. However, a job’s actual processing time depends on when its processing starts and how many jobs have completed before its start. We prove that the classical SPT (Shortest Processing Time) rule remains optimal when we minimize the makespan or the total completion time. For problems of minimizing the total weighted completion time, the maximum lateness, and the discounted total weighted completion time, we present heuristic sequencing rules and analyze the worst-case bounds for performance ratios. We also show that these heuristic rules can be optimal under some agreeable conditions between the normal processing times and job due dates or weights.     

Single-machine scheduling with deteriorating functions for job processing times

In many realistic scheduling settings a job processed later consumes more time than when it is processed earlier – this phenomenon is known as scheduling with deteriorating jobs. In the literature on deteriorating job scheduling problems, majority of the research assumed that the actual job processing time of a job is a function of its starting time. In this paper we consider a new deterioration model where the actual job processing time of a job is a function of the processing times of the jobs already processed. We show that the single-machine scheduling problems to minimize the makespan and total completion time remain polynomially solvable under the proposed model. In addition, we prove that the problems to minimize the total weighted completion time, maximum lateness, and maximum tardiness are polynomially solvable under certain agreeable conditions.     

Single machine scheduling with exponential sum-of-logarithm-processing-times based learning effect

In this paper we consider the single machine scheduling problems with exponential sum-of-logarithm-processing-times based learning effect. By the exponential sum-of-logarithm-processing-times based learning effect, we mean that the processing time of a job is defined by an exponent function of the sum of the logarithm of the processing times of the jobs already processed. We consider the following objective functions: the makespan, the total completion time, the sum of the quadratic job completion times, the total weighted completion time and the maximum lateness. We show that the makespan minimization problem, the total completion time minimization problem and the sum of the quadratic job completion times minimization problem can be solved by the smallest (normal) processing time first (SPT) rule, respectively. We also show that the total weighted completion time minimization problem and the maximum lateness minimization problem can be solved in polynomial time under certain conditions.