A modular nanoparticle-based system for reagentless small molecule biosensing

Metalloprotein tethered CdSe nanoparticles have been generated to provide selective and reagentless maltose biosensing. As opposed to cell or protein detection by semiconducting nanoparticle bioconjugates, a modular method for small-molecule detection using semiconducting nanoparticle bioconjugates has been difficult. Here we report a method for reagentless protein-based semiconducting nanoparticle biosensors. This method uses Ru(II) complex-CdSe nanoparticle interactions and the maltose-induced conformation changes of maltose binding protein to alter the CdSe nanoparticle fluorescence emission intensity. In this proof-of-principle system, the maltose-induced protein conformation changes alter the Ru(II) complex-CdSe nanoparticle interaction, which increases the CdSe emission intensity. Altered CdSe emission intensity effects are best described as electron transfer from the Ru(II) complex to the CdSe excited state forming the nonfluorescent CdSe anion. Four surface-cysteine, Ru(II) complex-attached maltose-binding proteins have been studied for maltose dependent alteration of CdSe emission intensities. With 3.0-3.5 nm diameter CdSe nanoparticles, all ruthenated maltose-binding proteins display similar maltose-dependent increases (1.4-fold) in CdSe emission intensity and maltose binding affinities (KA = 3 x 106 M-1). For these four systems, the only difference was the sample-to-sample variation in maltose-dependent responses. Thus, very few surface cysteine mutations need to be examined to find a successful biosensor, as opposed to analogous systems using organic fluorophores. This strategy generates a unimolecular, or reagentless, semiconducting nanoparticle biosensor for maltose, which could be applied to other proteins with ligand-dependent conformation changes.     

Transparent polymeric hybrid film of ZnO nanoparticle quantum dots and PMMA with high luminescence and tunable emission color

ZnO nanoparticle quantum dots (QDs)/poly(methyl methacrylate) (PMMA) composites are synthesized by conventional radical polymerization in the presence of 3-(trimethoxysilyl)propylmethacrylate (TPM)-modified ZnO nanoparticle QDs. Although unmodified ZnO nanoparticle QDs were precipitated in tetrahydrofuran (THF) and show only weak emissions under UV irradiation, ZnO nanoparticle QDs/PMMA composite is well dispersed in THF and shows high emissions. TPM acts as the stabilizer and promotes the compatibility between the ZnO nanoparticle QDs and the PMMA matrix. After evaporation of THF from the ZnO nanoparticle QDs/PMMA composite solution, transparent polymeric hybrid films of ZnO nanoparticle QDs and PMMA are obtained. These polymeric hybrid films are characterized by photoluminescence (PL) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis. The hybrid film exhibited a high quantum yield and PL emission under ultraviolet excitation. PL emission has been successfully tuned from blue to yellow.     

一种检测肼的纳米粒子探针及其生物成像应用

肼是一种广泛使用的化工原料,但它也是一种有毒化学品,对人类健康和环境安全有着严重威胁。因此,开发一种方便、快速检测肼的方法具有重要的意义。本文制备了一种芘甲醛纳米粒子探针,其能和肼快速反应,从而使探针的荧光信号发生变化,实现对肼的荧光检测。该探针检测肼具有高选择性和灵敏度,并成功地应用于HeLa细胞和斑马鱼中肼的成像。     

Spontaneous emission control of CdSe/ZnS nanoparticle monolayer in polymer nanosheet waveguide assembled on a one-dimensional silver grating surface

We present spontaneous emission control of a core-shell CdSe/ZnS nanoparticle array assembled with polymer ultrathin films consisting of polymer nanosheets on a silver grating substrate, which served as a unique and simple photonic cavity. The grating-coupled waveguide modes enabled 10(3) order luminescence enhancement and one-fourth spectral narrowing. The light emission from a CdSe/ZnS nanoparticle array can be controlled by tuning the film thickness of hybrid polymer nanoassemblies, which provides multiple emission performance with good tuning ability from red to green at low-power continuous wave laser excitation (～μW).     

Selective, reversible, reagentless maltose biosensing with core-shell semiconducting nanoparticles

Reagentless and reversible maltose biosensors are demonstrated using ZnS coated CdSe (CdSe@ZnS) nanoparticle emission intensities. This method is based on electron transfer quenching of unimolecular protein-CdSe@ZnS nanoparticle assemblies, which is provided by a protein-attached Ru(II) complex. This Ru(II) complex is presumed to reduce a valence band hole of the CdSe@ZnS excited state by tunneling through the ZnS overcoating. The Ru(II) complex mediated quenching of CdSe@ZnS nanoparticle emission was only decreased 1.2-fold relative to the CdSe nanoparticle systems. While four different Ru(II) complex attachment sites provided different amounts of nanoparticle emission quenching (1.20 to 1.75-fold decrease), all of these attachment sites yielded maltose-dependent intensity changes (1.1 to 1.4-fold increase upon maltose addition). Maltose dissociation constants for these four biosensing systems range from 250 nM to 1.0 microM, which are similar to the maltose-maltose binding protein dissociation constant that these sensors are based on. The increased fluorescence intensity was found to only occur in the presence of maltose. Furthermore, the ability of these reagentless protein-nanoparticle assemblies to perform maltose biosensing reversibly is demonstrated with the addition of alpha-glucosidase. Three 50 microM maltose additions after alpha-glucosidase addition showed increases of 2.2 microM, 600 nM, and 150 nM maltose. This result demonstrates a fluorometric method for examining alpha-glucosidase activity. Using maltose binding protein to control Ru(II) complex interactions with CdSe@ZnS nanoparticle surfaces provide a novel class of highly fluorescent, photostable biosensors that are selective for maltose.     

Red–Green–Blue Trichromophoric Nanoparticles with Dual Fluorescence Resonance Energy Transfer: Highly Sensitive Fluorogenic Response Toward Polyanions

A red–green–blue (RGB) trichromophoric fluorescent organic nanoparticle exhibiting multi‐colour emission was constructed; the blue‐emitting cationic oligofluorene nanoparticle acted as an energy‐donor scaffold to undergo fluorescence resonance energy transfer (FRET) to a red‐emitting dye embedded in the nanoparticle (interior FRET) and to a green‐emitting dye adsorbed on the surface through electrostatic interactions (exterior FRET). Each FRET event occurs independently and is free from sequential FRET, thus the resultant dual‐FRET system exhibits multi‐colour emission, including white, in aqueous solution and film state. A characteristic white‐emissive nanoparticle showed visible responses upon perturbation of the exterior FRET efficiency by acceptor displacement, leading to highly sensitive responses toward polyanions in a ratiometric manner. Specifically, our system exhibits high sensitivity toward heparin with an extremely low detection limit.     

Quenching of CdSe quantum dot emission, a new approach for biosensing

The emission of CdSe quantum dots linked to the 5'-end of a DNA sequence is efficiently quenched by hybridisation with a complementary DNA strand with a gold nanoparticle attached at the 3'-end; contact of the quantum dot and gold nanoparticle occurs.     

金纳米粒子表面自组装巯基十一烷醇单分子层体系的制备及其光散射特性研究

采用柠檬酸钠还原法制备了水相金纳米粒子, 通过巯基的自组装, 成功获得了巯基十一烷醇(MUN)单分子层保护的金纳米粒子. 用紫外可见光谱、透射电子显微镜、激光散射粒度分析、同步散射光谱和发射光谱等手段对组装前后的金纳米粒子的性质进行了研究. 结果表明: 制备的金纳米粒子最大吸收波长518 nm, 形状规则, 粒度均匀, 平均粒径为14.6 nm, 每个粒子含有约9.64×10⁴原子; 组装之后的金纳米粒子表面等离子体共振吸收峰红移17.0 nm, 平均粒径增大为20.2 nm, 组装层的平均厚度2.8 nm, 与MUN分子长度相当, 结合量实验证明每一个金纳米粒子可以结合约7.52×10³个MUN, 表面覆盖率为83.6%, 粒子分散均匀, 稳定性增强可长期保存; 同步散射光谱变化和发射光谱中分频、差频和倍频峰的存在证明, 金纳米粒子组装前后均具有非线性光学特性.     

A quantum mechanical theory for single molecule-single nanoparticle surface enhanced Raman scattering

Single molecule-single nanoparticle surface enhanced Raman scattering event is analyzed using a quantum mechanical approach, resulting in an analytical expression for the electromagnetic enhancement factor that succinctly elucidates the fundamental aspects of SERS. The nanoparticle is treated as a dielectric spherical cavity, and the resulting increase in the spontaneous emission rate of a molecule adsorbed onto the surface of the nanoparticle is examined. The overall enhancement in Raman scattering is due to both the increased local electromagnetic field and the Purcell effect. The predictions of the present model are in agreement with the simulation results of the classical model.     

碳纳米微粒的共振散射光谱研究

液相碳纳米微粒的共振散射光谱实验表明,当碳浓度小于360mg/L时,它在400、470、510和940nm产生4个共振散射峰;浓度大于900mg/L时无共振散射、碳微粒浓度在0．45－45mg/L范围内与共振散射光强度I470nm成良好的性关系,研究了光源和扫描速度对液相碳纳米微粒共振散射光谱的影响。结果表明,光源的发射强度分布不一是产生共振散射光谱峰的一个重要因素,并结合已有的实验结果提出了界面共振吸收和黑白纳米微粒共振散射概念,解释了碳纳米微粒体系的共振散射光谱。     

Electron donor solvent effects provide biosensing with quantum dots

A palmitate biosensor that uses the emission intensity of a semiconducting nanoparticle to report palmitate concentration is presented. This method uses electron transfer to quench the emission from a ZnS-coated CdSe nanoparticle. The fatty acid binding pocket of intestinal fatty acid binding protein is used to modulate the electron transfer properties of [Ru(L)(NH3)4](PF6)2 (L = 5-maleimido-1,10-phenanthroline) that is covalently attached within this pocket. Once the metal-complex-modified protein is attached to ZnS-coated CdSe nanoparticles, palmitate addition excludes water from around the metal complex and increases the electron transfer from the metal complex to the valence band hole of the nanoparticle excited state. A 1.6-fold change in emission intensity is observed upon adding a saturated amount (500 nM) of sodium palmitate. The dissociation constant was calculated as 5 nM with a 1 nM lower limit of detection. Since palmitate does not alter the global conformation of intestinal fatty acid binding protein, palmitate-mediated changes in pocket solvation are suggested. This represents a new method in biosensor construction with semiconducting nanoparticles. Including previous conformation-dependent biosensors, there are thousands of potential analytes that can be detected with these strategies. Such biosensors will provide fluorescence contrast imaging reagents for small molecule analytes.     

Nanoscale coupling of photons to vibrational excitation of Ag nanoparticle 2D array studied by scanning tunneling microscope light emission spectroscopy

Scanning tunneling microscope light emission (STM-LE) spectroscopy has been utilized to elucidate the luminescence phenomena of Ag nanoparticles capped with myristate (myristate-capped AgNP) and 2-methyl-1-propanethiolate (C(4)S-capped AgNP) on the dodecanethiol-precovered Au substrate. The STM imaging revealed that myristate-capped AgNPs form an ordered hexagonal array whereas C(4)S-capped AgNPs show imperfect ordering, indicating that a shorter alkyl chain of C(4)S-capped AgNP is not sufficient to form rigid interdigitation. It should be noted that such a nanoparticle ordering affects the luminescence properties of the Ag nanoparticle. We found that the STM-LE is only detected from the Ag nanoparticles forming the two-dimensional superlattice. This indicates that the STM-LE of the Ag nanoparticle is radiated via the collective excitation of the local surface plasmon resonance (LSPR) spread over the Ag nanoparticles. Note that the STM-LE spectra of the Ag nanoparticles exhibit spike-like peaks superimposed on the broad light emission peak. Using Raman spectroscopy, we concluded that the spike-like structure appearing in the STM-LE spectra is associated with the vibrational excitation of the molecule embedded between Ag nanoparticles.     

On-line monitoring of composite nanoparticles synthesized in a pre-industrial laser pyrolysis reactor using Laser-Induced Breakdown Spectroscopy

Laser-Induced Breakdown Spectroscopy (LIBS) was employed for on-line and real time process monitoring during nanoparticle production by laser pyrolysis. Laser pyrolysis has proved to be a reliable and versatile method for nanoparticle production. However, an on-line and real time monitoring system could greatly enhance the process optimization and accordingly improve its performances. For this purpose, experiments aiming at demonstrating the feasibility of an on-line monitoring system for silicon carbide nanoparticle production using the LIBS technique were carried out. Nanosecond laser pulses were focused into a cell through which part of the nanoparticle flux diverted from the production process was flowed for LIBS analysis purposes. The nanoparticles were vaporized within the laser-induced plasma created in argon used as background gas in the process. Temporally-resolved emission spectroscopy measurements were performed in order to monitor nanoparticle stoichiometry. Promising results were obtained and on-line Si/C_x stoichiometry was successfully observed. These results put forward the possibility of real time correction of the nanoparticle stoichiometry during the production process.     

纳米CdSe与聚4-乙烯基吡啶盐的复合与表征

用巯基乙酸作稳定剂在水相中合成了CdSe纳米颗粒. 聚4-乙烯基吡啶季铵盐(PVPNI)通过静电作用与CdSe纳米颗粒复合形成了纳米复合材料.该复合材料通过红外光谱数据（IR）、电感耦合等离子发射光谱（ICP-AES）、透射电镜（TEM）等方法进行了表征,并通过紫外可见吸收光谱(UV-Vis)和荧光光谱(PL)对其光学性质进行了研究.结果表明,复合材料的形成,改善了纳米CdSe的分散性,并提高了纳米CdSe的荧光强度.     

On Ultrasmall Nanocrystals

Ultrasmall nanocrystals are a growing sub-class of traditional nanocrystals that exhibit new properties at diameters typically below 2 nm. In this review, we define what constitutes an ultrasmall nanoparticle while distinguishing between ultrasmall and magic-size nanoparticles. After a brief overview of ultrasmall nanoparticles, including ultrasmall gold clusters, our recent work is presented covering the optical properties, structure, and application of ultrasmall CdSe nanocrystals. This unique material has potential application in solid state lighting due to its balanced white emission. This section is followed by a discussion on the blurring boundary between what can be considered a nanoparticle and a molecule.     

Assessment of functional changes in nanoparticle-exposed neuroendocrine cells with amperometry: exploring the generalizability of nanoparticle-vesicle matrix interactions

Using two of the most commonly synthesized noble metal nanoparticle preparations, citrate-reduced Au and Ag, the impacts of short-term accidental nanoparticle exposure are examined in primary culture murine adrenal medullary chromaffin cells. Transmission electron microscopy (TEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Alamar Blue viability studies revealed that nanoparticles are taken up by cells but do not decrease cell viability within 48 hours of exposure. Carbon-fiber microelectrode amperometry (CFMA) examination of exocytosis in nanoparticle-exposed cells revealed that nanoparticle exposure does lead to decreased secretion of chemical messenger molecules, of up to 32.5% at 48 hours of Au exposure. The kinetics of intravesicular species liberation also slows after nanoparticle exposure, between 30 and 50% for Au and Ag, respectively. Repeated stimulation of exocytosis demonstrated that these effects persisted during subsequent stimulations, meaning that nanoparticles do not interfere directly with the vesicle recycling machinery but also that cellular function is unable to recover following vesicle content expulsion. By comparing these trends with parallel studies done using mast cells, it is clear that similar exocytosis perturbations occur across cell types following noble metal nanoparticle exposure, supporting a generalizable effect of nanoparticle-vesicle interactions.     

Carrier recombination dynamics in anatase TiO2 nanoparticles

We present an experimental study of the radiative recombination dynamics in size-controlled TiO₂ nanoparticles in the range 20–130 nm. Time-integrated photoluminescence spectra clearly show a dominance of self-trapped exciton (STE) emission, with main features not dependent on the nanoparticle size and on its environment. From picosecond time-resolved experiments as a function of the excitation density and the nanoparticle size we address the STE recombination dynamics as the result of two main processes related to the direct STE formation and to the indirect STE formation mediated by non-radiative surface states.     

Excitation Energy Transfer from Semi‐Conducting Polymer Nanoparticles to Surface‐Bound Fluorescent Dyes

Summary: The first examples of the dye‐coated semi‐conducting polymer nanoparticles as well as experiments to demonstrate the excitation energy transfer from the excited chromophor of the nanoparticle to the fluorescent dye are described. We have demonstrated that the blue fluorescence of the dye‐coated polyfluorene nanoparticles is only slightly quenched after dye deposition. However, a new emission band of the surface‐bound dye (Rhodamine 6G or Rhodamine TM) appears in the wavelength region of 530–600 nm. These results clearly indicate an effective excitation energy transfer from the excited PF chromophores to the fluorescent dye.

Emission spectra of PF2/6 nanoparticle dispersion and of Rhodamine 6G‐coated nanoparticle dispersion.     

Enhanced stability of Janus nanoparticles by covalent cross-linking of surface ligands

A mercapto derivative of diacetylene was used as the hydrophilic ligand to prepare Janus nanoparticles by using hydrophobic hexanethiolate-protected gold (AuC6, diameter 5 nm) nanoparticles as the starting materials. The amphiphilic surface characters of the Janus nanoparticles were verified by contact angle measurements, as compared to those of the bulk-exchange counterparts where the two types of ligands were distributed rather homogeneously on the nanoparticle surface. Dynamic light scattering studies showed that the Janus nanoparticles formed stable superstructures in various solvent media that were significantly larger than those by the bulk-exchange counterparts. This was ascribed to the amphiphilic characters of the Janus nanoparticles that rendered the particles to behave analogously to conventional surfactant molecules. Notably, because of the close proximity of the diacetylene moieties on the Janus nanoparticle surface, exposure to UV irradiation led to effective covalent cross-linking between the diacetylene moieties of neighboring ligands, as manifested in UV-vis and fluorescence measurements where the emission characteristics of dimers and trimers of diacetylene were rather well-defined, in addition to the monomeric emission. In contrast, for bulk-exchange nanoparticles, no trimer emission could be identified, and the intensity of dimer emission was markedly lower (though the intensity increased with increasing diacetylene coverage on the particle surface) under the otherwise identical experimental conditions. This is largely because the diacetylene ligands were distributed on the entire particle surface, and it was difficult to find a large number of ligands situated closely so that the stringent topochemical principles for the polymerization of diacetylene derivatives could be met. Importantly, the cross-linked Janus nanoparticles were found to exhibit marked enhancement of the structural integrity, which was attributable to the impeded surface diffusion of the thiol ligands on the nanoparticle surface, as manifested in fluorescence measurements of aged nanoparticles.     

Dynamic and static quenching of fluorescence by 1-4 nm diameter gold monolayer-protected clusters

How the efficiency of molecular quenching by Au nanoparticles depends on nanoparticle size is reported for (a) dynamic (collisional) quenching of four different fluorophores by three Au nanoparticles having similar protective layers but differing core diameters (1.1, 1.6, and 2.0 nm) and (b) static quenching in the electrostatic association between [Ru(bpy)3]2+ and five tiopronin-protected Au nanoparticles having core diameters from 1.3 to 3.9 nm. The quenching constants systematically increase with core size. In (a), the dynamic constants scale with the molar absorbance coefficients of the nanoparticles, showing the essentially of the absorbance/emission spectral overlap, and the associated nanoparticle core density of electronic states, in energy-transfer quenching. In (b), the fluorescence of the Au nanoparticle itself was enhanced by energy transfer from the [Ru(bpy)3]2+ fluorophore.