计及Hall和离子滑移电流的旋转流体在与时间相关初值条件下的MHDCouette流动

考虑Hall和离子滑移电流的影响,在旋转系统中研究导电流体非稳定的MHD Couette流动．在小数值磁场Reynolds数假定下,推导出基本的控制方程,使用著名的Laplace变换技术,数值地求解该基本方程．分两种情况:磁场相对于流体或者移动平板固定时,得到速度和表面摩擦力统一的闭式表达式．用图形讨论了问题的不同参数,对速度和表面摩擦力的影响．所得结果显示,主流速度u和次生速度v随着Hall电流而增大．离子滑移电流的增大,也会导致主流速度u的增大,但会使次生速度v减小．还给出了旋转、Hall和离子滑移参数的综合影响,确定了次生运动对流体流动的贡献．     

微极流体薄膜层通过以滑移速度移动的可渗透无限平板时流体特性变化和热辐射对流动和热传导的影响

微极流体薄膜层通过按滑移速度移动的可渗透无限竖直平板时,研究热辐射对混合对流薄膜层流动和热传导的影响.假定流体粘度和热传导率变化是温度的一个函数.对一些典型的可变参数值,应用Chebyshev谱方法,数值求解流动的控制方程.将所得结果与已发表文献的结果进行比较,结果是一致的.绘出并讨论了可变参数对速度、微旋转速度、温度分布曲线、表面摩擦因数和Nusselt数的影响.     

不对称柔性壁管道内幂律流体蠕动传输的精确解

在不对称管道内,研究了壁面柔曲性对非Newton流体蠕动流的影响.流变学性质由幂律流体本构方程表征.在数学表达中,采用了长波和低Reynolds数近似.得到了流函数和速度的精确解.给出了流线图及其俘获现象.对所讨论的流动,陈列了关键参数的显著特征,并最后给出了主要结论.     

微极流体润滑在径向轴承中应用

本文从微极流体场方程出发,在润滑层的通常假设下,把它化简为两个独立的常微分方程组,并求得速度、微转动角速度的解析表达式.推导了微极流体润滑的雷诺方程,把它应用于有限长径向轴承的求解.通过数值计算得到了微极效应对各种动力参数、几何参数下轴承的压力分布、承载力、流量系数和摩擦系数的影响,并析了它的实际意义,使微极流体理论应用到工程问题又接近了一步.     

在柱坐标系下研究由拉伸缸引起的Casson纳米流体流动与传热传质现象

首次利用柱坐标研究速度滑移和对流表面边界条件下,由拉伸缸引起的稳态层流Casson纳米流体流动、传热及传质现象.采用恰当的相似变换将偏微分控制方程转化为高阶非线性耦合常微分方程,并通过打靶法进行数值求解,图示并详细分析了不同物理参数对速度、温度及浓度分布的影响.结果显示,速度受滑移参数的影响较大,温度和浓度分别受Biot数和Lewis数的影响较大;随着Casson参数的增大,速度下降而温度和浓度都增加;温度随着Brown(布朗)运动参数或热泳参数的增加而上升;浓度随着Brown运动参数的增大而减小,随着热泳参数的增大而增大,当热泳参数较大时,浓度出现了"回流"现象.     

微极液体在两个多孔圆盘间的MHD流动及其热传导

两个平行的无限大多孔圆盘,圆盘表面有均匀注入时,数值地研究圆盘间不可压缩导电微极流体,在横向外加磁场作用下的轴对称稳定层流.运用von Krmn的相似变换,将非线性运动的控制方程转化为无量纲形式.使用基于有限差分格式的算法,在相应的边界条件下,求解简化后耦合的常微分方程组.讨论Reynolds数、磁场参数、微极参数和Prandtl数,对流动速度和温度分布的影响.在特殊情况下,所得结果与已有文献的工作有着很好的一致性.研究表明,圆盘表面的传热率随着Rynolds数、磁场参数和Prandtl数的增加而增加;剪切应力随着注入的增加而减少,但它随着外部磁场的加强而增加.和Newton流体相比较,微极流体的剪切应力因素较弱,有利于聚合体加工过程中流动和温度的控制.     

基于二阶滑移边界的MHD在可渗透延伸壁面上的驻点流研究

研究了多孔介质中带二阶滑移边界的不可压缩MHD粘性流体在可渗透指数延伸壁面上的驻点流问题.通过相似变换将描述驻点流的控制方程转换为非线性常微分方程,并利用MATLAB的bvp5c函数求解非线性问题.分析并讨论了一、二阶滑移参数,抽吸/喷注参数以及渗透参数对速度分布和壁面剪切力的影响.结果显示在多孔介质中当壁面延伸速度小于外界主流速度时,随着一阶滑移参数、二阶滑移参数绝对值、抽吸/喷注参数以及渗透参数的增大,速度增大,壁面剪切力减小且均为正数;而当壁面延伸速度大于外界主流速度时形成一个反边界层,速度减小,壁面剪切力绝对值也减小且均为负数;二阶滑移参数对速度剖面和壁面剪切力的影响略大于一阶滑移参数的影响,抽吸/喷注参数对速度剖面和壁面剪切力的影响明显大于渗透参数或磁场参数的影响.     

柔性圆柱形微管道内的电动流动及传热研究

研究了在纯压力驱动下,流体通过壁面带有某种电荷的聚电解质层（PEL）的微管道，即柔性微管道的电动流动和热传输特性.基于先前得到的电势和速度的解析解以及流向势的数值解,在热充分发展的情况下, 假设壁面热流恒定,利用有限差分法求解了包括黏性耗散和Joule(焦耳)热影响下的能量方程，获得了无量纲温度数值解.通过数值计算，给出了相关的无量纲参数对速度、温度以及Nusselt(努赛尔)数的影响.研究表明,当其他参数固定时,无量纲速度和温度随着无量纲聚电解质层厚度d的增大而减小,随着聚电解质层中等效双电层厚度与双电层厚度之比K_λ的增大而增大；Nusselt数随着Joule热系数S的增大而减小,随无量纲聚电解质层厚度d的增大而减小,随着K_λ的增大而增大.     

四阶流体在一个倾斜有局部滑移的非对称通道中作有热交换的蠕动流

分析研究滑移和热交换对四阶流体作磁流体动力学蠕动流的影响.首先建立模型的控制方程,然后在长波长的假设下,采用标准的摄动法近似值求解;给出的解包括:流函数、速度、压力梯度、温度和热交换系数的显式表达式;分析了滑移参数增大时泵输送性质的变化,及其潴留现象.进而对所出现的变化参数,得到了温度分布曲线和热交换系数;讨论了这些参数对所考虑流动特性的影响;并与以往发表的无滑移情况相比较,结果基本一致.     

滑移和感应磁场对Johnson-Segalman流体蠕动传输的影响

存在感应磁场和滑移条件下,研究Johnson-Segalman(J-S)流体在平面通道中的蠕动流.通道中的流动认为是对称的,并在剪切应力项中考虑了速度的滑移条件.首先给出问题的数学公式,然后在长波长和低Reynolds数近似下,求解该方程组得到摄动解,确定沿管道截面的压力增量、轴向速度、微转动分量、流函数、磁力函数、轴向感应磁场和电流密度分布公式.导出了小数值Weis-senberg数时解的表达式,分析并勾画出诸流动物理量的有趣变化.     

幂律速度运动表面上磁流体在驻点附近的滑移流动

从理论上研究了具有非线性延伸表面的磁流体在滑移流区的动量传输问题.通过Lie群变换把控制方程组转化为常微分方程组,利用同伦分析方法求得了问题的近似解析解.获得的级数解与文献中的数值解吻合得较好.另外,利用级数解分析滑移参数、磁场强度、速度比率参数、吸入喷注参数和幂律指数对流动的影响.结果显示这些参数对壁剪切力和边界层内流场有较大的影响.     

等宽多孔介质壁面管道中磁流体的流动

研究等宽管道中,磁场、可渗透壁面、Darcy速度和滑动参数,对流体稳定流动的综合影响.假设管道中流动的流体是均匀的、不可压缩的Newton流体.利用Beavers-Joseph滑动边界条件,得到控制方程的解析解.详细地讨论了磁场、可渗透性、Darcy速度和滑动参数对轴向速度、滑动速度和剪应力的影响.可以看出,Hartmann数、Darcy速度、多孔参数和滑动参数,在改变流动方向,进而改变剪应力方面,起着至关重要的作用.     

存在滑移时两圆球间的幂律流体挤压流动

基于Reynolds润滑理论分析了壁面滑移对任意圆球颗粒间幂律流体的挤压流动的影响。研究表明有壁面滑移时挤压流动的粘性力可通过引进本文定义的滑移修正系数分离出无滑移解。推导出的挤压力滑移修正系数是一积分表达式，依赖于滑移参数、幂律指数、球间隙和积分上限。一般地壁面滑移导致粘性力减小，粘性力的减小量随幂律指数的增大而增大，表明壁面滑移对剪切增稠流变材料有更大的影响；粘性力的减小量还随着滑移参数的增大而增加，而这恰与假设相符合；粘性力的减小量又随球间隙减小或积分上限的增大（从液桥情况到完全浸渍）而减小直到趋于常数，这一特性在离散元模拟时可以有效地减少计算量。     

DTM-BF方法和可渗透收缩壁面上带滑移速度的非稳态磁流体力学流动

研究了运动的粘性导电流体中可渗透收缩壁面上非稳态磁流体边界层流动,利用解析和数值方法对问题进行了研究,并考虑了壁面速度滑移的影响．提出了一个新的解析方法（DTM-BF）,并将其应用于求解带有无穷远边界条件的非线性控制方程的近似解析解．对所有的解析结果和数值结果进行了对比,结果显示两者非常吻合,从而证明了DTM-BF方法的有效性．另外,对不同的参数,得到了控制方程双解和单解的存在范围．最后,分别讨论了滑移参数、非稳态参数、磁场参数、抽吸/喷注参数和速度比例参数对壁面摩擦、唯一解速度分布和双解速度分布的影响．     

Hydrodynamic and thermal slip flow boundary layers over a flat plate with constant heat flux boundary condition

In this paper the boundary layer flow over a flat plat with slip flow and constant heat flux surface condition is studied. Because the plate surface temperature varies along the x direction, the momentum and energy equations are coupled due to the presence of the temperature gradient along the plate surface. This coupling, which is due to the presence of the thermal jump term in Maxwell slip condition, renders the momentum and energy equations non-similar. As a preliminary study, this paper ignores this coupling due to thermal jump condition so that the self-similar nature of the equations is preserved. Even this fundamental problem for the case of a constant heat flux boundary condition has remained unexplored in the literature. It was therefore chosen for study in this paper. For the hydrodynamic boundary layer, velocity and shear stress distributions are presented for a range of values of the parameter characterizing the slip flow. This slip parameter is a function of the local Reynolds number, the local Knudsen number, and the tangential momentum accommodation coefficient representing the fraction of the molecules reflected diffusively at the surface. As the slip parameter increases, the slip velocity increases and the wall shear stress decreases. These results confirm the conclusions reached in other recent studies. The energy equation is solved to determine the temperature distribution in the thermal boundary layer for a range of values for both the slip parameter as well as the fluid Prandtl number. The increase in Prandtl number and/or the slip parameter reduces the dimensionless surface temperature. The actual surface temperature at any location of x is a function of the local Knudsen number, the local Reynolds number, the momentum accommodation coefficient, Prandtl number, other flow properties, and the applied heat flux.     

Flow and heat transfer of a non-Newtonian fluid past a stretching sheet with partial slip

The entrained flow and heat transfer of a non-Newtonian third grade fluid due to a linearly stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equations into ordinary differential equations. The issue of paucity of boundary conditions is addressed and an effective second order numerical scheme has been adopted to solve the obtained differential equations even without augmenting any extra boundary conditions. The important finding in this communication is the combined effects of the partial slip and the third grade fluid parameter on the velocity, skin-friction coefficient and the temperature field. It is interesting to find that the slip and the third grade fluid parameter have opposite effects on the velocity and the thermal boundary layers.     

Effects of partial slip,viscous dissipation and Joule heating on Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid

The steady Von Kármán flow and heat transfer of an electrically conducting non-Newtonian fluid is extended to the case where the disk surface admits partial slip. The fluid is subjected to an external uniform magnetic field perpendicular to the plane of the disk. The constitutive equation of the non-Newtonian fluid is modeled by that for a Reiner–Rivlin fluid. The momentum equations give rise to highly non-linear boundary value problem. Numerical solutions for the governing non-linear equations are obtained over the entire range of the physical parameters. The effects of slip, magnetic parameter and non-Newtonian fluid characteristics on the velocity and temperature fields are discussed in detail and shown graphically. Emphasis has been laid to study the effects of viscous dissipation and Joule heating on the thermal boundary layer. It is interesting to find that the non-Newtonian cross-viscous parameter has an opposite effect to that of the slip and the magnetic parameter on the velocity and the temperature fields.     

Entropy Generation and Thermal Radiation Effects on Nanofluid over Permeable Stretching Sheet

In the present paper, effects of entropy generation and nonlinear thermal radiation on Jeffery nanofluid over permeable stretching sheet with partial slip effect were analyzed. The suitable similarity transformation is utilized for the reduction of a set of governing equations, which are solved by using Differential Transformation Method (DTM) with the help of symbolic software MATHEMATICA. The accuracy of impact of slip parameter on coefficient of skin friction by using DTM and numerical method (Shooting technique with fourth-order Runge-Kutta) is illustrated and good agreement is found. Further, velocity, temperature, nanoparticle volume fraction and entropy generation profiles are shown graphically and studied in detail for various physical parameters. We notice that, as slip parameter rises the velocity and entropy generation profile rises. Enhancement in the effect of nonlinear thermal radiation reduces the entropy generation.     

Three‐dimensional Stokes flow caused by a translating–rotating sphere bisected by a free surface bounding a semi‐infinite micropolar fluid

Explicit velocity and microrotation components and systematic calculation of hydrodynamic quasistatic drag and couple in terms of nondimensional coefficients are presented for the flow problem of an incompressible asymmetrical steady semi‐infinite micropolar fluid arising from the motion of a sphere bisected by a free surface bounding a semi‐infinite micropolar fluid. Two asymmetrical cases are considered for the motion of the sphere: parallel translation to the free surface and rotation about a diameter which is lying in the free surface. The speed of the translational motion and the angular speed for the rotational motion of the sphere are assumed to be small so that the nonlinear terms in the equations of motion can be neglected under the usual Stokesian approximation. A linear slip, Basset‐type, boundary condition has been used. The variation of the resistance coefficients is studied numerically and plotted versus the micropolarity parameter and slip parameter. The two limiting cases of no‐slip and perfect slip are then recovered. Copyright © 2008 John Wiley & Sons, Ltd.     

Unsteady Slip Flow and Heat Transfer Analysis of Oldroyd-B Fluid Over the Stretching Wedge北大核心CSCD

研究了在速度滑移现象存在下,上随体Oldroyd-B流体绕加热的楔形体的非稳态流动。采用松弛-延迟热通量模型,模拟了传热过程和热延迟时间对传热的影响,通过考虑浮升力、热辐射和对流换热边界条件,进一步研究了流动及传热特性。利用同伦分析方法获得常微分方程组的近似解析解,发现滑移参数的增大可以促进流体的流动,以及流体的温度随热辐射参数增大而升高。此外还发现,温度场在热松弛时间和热延迟时间中出现相反的变化趋势。