用于苯选择加氢制环己烯的非晶态合金Ru-La-B/ZrO2催化剂的失活与再生

 研究了在中试装置上经长期运转后的非晶态合金Ru-La-B/ZrO2催化剂的失活原因与再生方法. 结果表明: 催化剂失活不是由微孔堵塞、比表面积减小、晶粒长大或催化剂中毒而引起的,而是由于在长期运转过程中催化剂吸附了反应浆液中的Zn2+ 和反应器壁引入的Fe2+ , 通过酸洗的方法可以使催化剂的活性和选择性基本恢复.     

Impact of ageing on the distribution of platinum group elements and catalyst poisoning elements in automobile catalysts

The distribution of platinum group elements (PGEs) and catalyst poisoning elements (Pb, Zn, P and S) on the surface of gasoline and diesel automobile catalysts was investigated within this study. Laser ablation–inductively coupled plasma mass spectrometry (LA–ICPMS) provides both the sensitivity and the spatial resolution required for the surface analysis of sectioned automobile catalysts, and scanning along channels reveals the distribution of longitudinal changes in PGE and catalyst poisoning elements. Changes in catalyst surface features were studied for fresh catalysts and after ageing of the catalyst up to 80 000 km for both types of catalysts studied. The PGEs in the gasoline catalyst were found to decrease at the front of the catalyst after ageing, whereas the diesel catalyst presented a more constant loss along the catalyst. The fraction of poisoning elements (Pb, P and Zn for the gasoline catalyst and P and Zn for the diesel catalyst) retained by the catalyst is distributed non‐uniformly over the length of the catalyst. This could indicate different ageing mechanisms for gasoline and diesel catalysts. Copyright © 2003 John Wiley & Sons, Ltd.     

合成1,5-苯并二氮杂卓衍生物的催化剂研究进展

根据催化剂种类的不同,综述了近十年在1,5-苯并二氮杂(草)衍生物的合成过程中使用的催化剂的研究进展,包括路易斯酸、布朗斯特酸、有机酸、负载催化剂、离子液体催化剂、哌啶类催化剂、介孔材料等,分析了各方法的优缺点,期望能够为探索出更好的催化剂提供启发.     

聚烯烃催化剂的发展及我们的对策

评述了聚烯烃催化剂的几个重要发展阶段，讨论了Ziegler-Natta催化剂，茂金属催化剂及非茂有机金属催化剂的组成及特征，提出了我国在聚烯烃催化剂开发方面的对策。     

氯对钌基氨合成催化剂的影响

氯离子的脱除是制备高性能钌催化剂的一个重要步骤。本文综述了新型钌基氨合成催化剂制备过程中的脱氯环节。介绍了以RuCl₃·3H₂O作为活性前驱体的钌催化剂中氯离子的来源、氯在催化剂中的存在方式、它对催化剂的毒害作用以及去除氯离子的方法。     

合成低碳醇用超细Mo-Co-K催化剂的XPS研究

 采用XPS技术对氧化态及还原态超细Mo－Co－K催化剂进行了研究．结果表明,在氧化态超细Mo－Co－K催化剂中,钼和钴分别以Mo6＋和Co2＋物种存在,催化剂中各物种之间存在着相互作用;随着Co／Mo比的增大,还原态催化剂中Mo4＋物种的含量逐渐增大并出现极大值;催化剂上合成低碳醇反应性能与其表面的Mo4＋物种有关．将催化剂表面的Mo4＋物种含量与其合成低碳醇选择性进行关联,发现二者存在着很好的对应关系．此外,对超细Mo－Co－K催化剂上合成低碳醇反应的活性中心进行了初步探讨．     

费托合成中Co/ZrO2/SiO2催化剂的失活行为

 采用等体积分步浸渍法制备了费托合成用Co/ZrO2/SiO2催化剂,并用XRD,TPR和N2-吸附等手段对催化剂进行了表征. 考察了催化剂在费托反应过程中的结构变化和失活行为. 结果表明,反应过程中硅酸钴物种的生成是催化剂失活的主要原因,且硅酸钴的生成与产物水的分压有关; 晶粒长大也可能是催化剂失活的原因之一.     

结焦催化剂上焦炭氢碳比的测定方法

提出了一种测定裂化结焦催化剂上焦碳H/C的方法--酸溶-元素分析法。该方法主要利用HF和HCl将焦碳从催化剂上进行剥离，然后利用元素分析仪测定焦碳中的碳含量和氢含量，从而可以得到结焦催化剂上焦碳的H/C质量比。这种测定方法避免了在测氢过程中催化剂结晶水和吸附水对测定结果的影响，大大提高了催化剂上焦碳H/C的测定精度。     

Numerical simulation of the ordered catalyst layer in cathode of proton exchange membrane fuel cells

A steady-state, one-dimensional numerical model based on cylindrical electrode structure is presented to analyze the performance of the ordered cathode catalyst layer in Proton Exchange Membrane Fuel Cells. The model equations account for the Tafel kinetics of oxygen reduction reaction, proton migration, oxygen diffusion in the cylindrical electrolyte and the gas pores, oxygen distribution at the gas/electrolyte interface. The simulation results reveal that ordered catalyst layers have better performance than conventional catalyst layers due to the improvements of mass transport and the uniformity of the electrochemical reaction rate across the whole width of the catalyst layer. The influences of oxygen diffusivity in gas phase and electrolyte, and the proton conductivity have been shown. The limitation by oxygen diffusion in gas phase drives the active region of the catalyst layer to the catalyst layer/gas diffuser interface. The limitation by proton migration confines the active region of the catalyst layer to the membrane/catalyst layer interface. The limitation due to oxygen diffusion in electrolyte film maintains the uniform distribution of the active region throughout the ordered catalyst layer.     

在超临界正己烷介质中的F-T合成反应行为

在固定床反应器中,以正己烷为超临界介质,研究了三种Co催化剂（浸渍、喷雾干燥、双模催化剂）上的F-T合成反应行为。在相同的Co质量分数下,喷雾干燥催化剂和双模催化剂的活性接近,都高于浸渍催化剂。在喷雾干燥催化剂上CO的转化率显著高于浸渍催化剂。喷雾干燥催化剂F-T产物中具有高的低碳选择性和低的1-烯烃质量分数,然而在相近的CO转化率下,喷雾干燥和浸渍催化剂具有类似的1-烯烃质量分数。对于浸渍催化剂,当Co质量分数从5％增加到15％,CO转化率从8.3％增加到43.6％。含Co5％的催化剂比质量分数为10％、15％、20％催化剂的甲烷选择性低2.0%～3.0%,但产物中1-烯烃的质量分数明显要高。     

HZSM-5在线提质生物油及催化剂失活机理分析

对不同使用时间的HZSM-5分子筛在线催化提质制取的生物油进行理化特性和成分分析,从生物油品质角度对HZSM-5的催化性能进行评价;并采用TG、BET、XRD、SEM和TEM等方法对失活的HZSM-5催化剂进行表征分析,探讨了HZSM-5催化提质生物油的失活机理,并进行再生研究。研究表明,HZSM-5分子筛可转化生物油中的酸类、醛类和酮类等"非期望"有机物,生成较多"期望"有机物,如酚类和芳烃类物质,降低生物油的氧含量及酸性,提高生物油的热值;HZSM-5使用80 min后,生物油品质明显变差,催化剂活性明显降低;失活催化剂上沉积的焦炭主要呈纤维状,同时,还存在少量石墨状焦炭,焦炭总量达14.12%,且使用过程中催化剂的比表面积和孔容均下降,晶粒的团聚现象加剧,结晶度下降;在催化提质过程中,在孔道内生成的石墨状焦炭及在表面形成的纤维状焦炭大量覆盖活性位点,使得催化剂失活。经550℃再生后,催化剂可恢复催化性能。     

Synthesis of Chiral Metal Complexes of Unsymmetrical Schiff Bases

Recently, in asymmetric catalyst research the great developments of chiral Salen complexes have been made, but the report on unsymmetrical schiff bases is deficient. The unsymmetrical schiff bases complexes are an effective system in catalytically selective Olefin-epoxidations1. At the same time, unsymmetrical schiff bases was immobilized onto polymer supports for heterogenization2. The potential benefits of the catalyst include facilitation of catalyst separation from reagents, simplification of methods for catalyst recycle, and the possible adaptation of the immobilized catalyst to continuous-flow processes. A series of new unsymmetrical schiff bases was synthesized to study the relations between unsymmetry and enantioselectivity and select better catalyst. The following is the route:     

合成条件对磷钨杂多酸季铵盐催化剂性能的影响

 采用廉价的季铵盐［C16H33(CH3)3(70%)+C18H37(CH3)3(30%)］N+Cl-(简记为Q+Cl-)代替［C5H5NC16H33］+Cl-作为相转移剂,制备了一种新型的反应控制相转移催化剂,详细考察了制备过程中各因素对催化剂性能的影响,确定了适宜的催化剂制备条件,同时对催化剂的 31P NMR上的各峰进行了归属. 研究结果表明,在1-辛烯环氧化反应中,催化剂各组分在双氧水作用下能够相互转化形成合适比例的多组分复合催化剂,催化活性较高,但任一组分单独作用时催化活性则较低.     

烷基化催化剂表面酸性及催化性能的动力学研究

在确定关联升温速率、脱附峰温和脱附峰覆盖率的程序升温脱附动力学模型的基础上，通过TPD实验和模型参数估值，建立了表征催化剂酸密度、酸强度及强度分布情况的方法。研究表明，随着活化温度的提高，固体酸催化剂表面酸中心强度分布先变宽后趋于均匀，350?℃活化催化剂的强度分布最宽；催化剂表面酸强度和酸密度随活化温度提高均呈先增大后降低、分别在350 ℃和250 ℃活化温度达到极大值的变化规律。催化剂酸性与催化性能关联的结果表明，随着活化温度的提高，烷基化反应速率常数与总脱附量的变化趋势相同，而催化剂失活速率常数与脱附活化能变化趋势相同；催化剂活性稳定性随其酸强度的增大而变差，催化剂活性与催化剂酸量和酸强度有关。     

Characteristics of membrane-electrode assemblies of hydrogen-air fuel cells with PtCoCr/C catalyst

A cathodic catalyst, which can replace monoplatinum commercial catalyst, is developed and investigated. New catalyst combines a smaller consumption of platinum with a higher mass activity and corrosion resistance. A method of fabrication of ternary (PtCoCr/C) catalyst is improved in order to obtain the catalytic system containing 45–50 wt % platinum. This is necessary to form thinner active layers of cathodes of membrane-electrode assemblies of hydrogen-air fuel cells. The activity of the synthesized PtCoCr/C catalyst is by 1.2–1.5 times higher than that of the monoplatinum catalyst containing 60–70 wt % Pt. According to the accelerated-test data, the corrosion resistance of PtCoCr/C catalyst is also higher than that of Pt/C system.     

Catalytic features of a low-temperature reduced alumina-supported platinum catalyst. Activity and selectivity in the liquid-phase hydrogenation of benzaldehyde and nitrobenzene

A low-temperature reduced (LR) supported platinum catalyst was used for the hydrogenation of benzaldehyde, nitrobenzene and their mixture in ethanol, and compared with a high-temperature reduced (HR) catalyst. For benzaldehyde the LR catalyst was highly active to the formation of benzyl alcohol and did not give benzaldehyde diethyl acetal, which was largely formed by the HR catalyst. For the mixture, benzylideneaniline was selectively produced by the LR catalyst, while the HR catalyst gave benzylaniline and the acetal.     

干气制乙苯结炭沸石催化剂烧炭再生研究

以苯和炼厂干气中的乙烯合成乙苯结炭催化剂为研究对象，对结炭催化剂上积炭的性质及不同温度下的烧炭情况进行了研究，考察了再生前后催化剂的酸性、活性、晶相、比表面及孔结构等性能的变化。结果表明，催化剂孔的内表面积炭占据了酸性中心，致使催化剂活性降低；在烧炭时温度大于300 ℃才开始烧炭，最佳烧炭温度应控制在500℃～550℃，600 ℃可将炭完全烧净。程序升温脱附（TPD）实验表明，550 ℃实验室烧炭后催化剂酸种类及其比例可完全恢复，酸量可恢复到95%。晶相、孔结构基本未变，催化剂的活性得到良好恢复。     

甲烷氧化偶联W-Mn催化剂的制备及表征

本文详细报道了制备因素对Na-W-Mn—O/SiO_2催化剂反应性能的影响,并用O_2-TPD,XRD,FT-IR,LRS等方法对催化剂进行了表征。结果表明,该催化剂的最佳组成是Mn 0.32wt％—Na_2WO_4 4wt％/SiO_2,由混浆法制备的催化剂具有较好的稳定性,连续反应30 h后,其甲烷转化活性和C_2烃收率均保持不变。催化剂的结构研究表明,Na_2WO_4与SiO_2发生了相互作用,形成有Si参与的表面钨氧物种,该催化剂具有较好的催化活性与表面钨氧物种的形成相关联,Mn的加入,可能大大提高了该催化剂中表面晶格氧的浓度,从而加快了CH_4的活化速度。     

Kinetics studies of nano-structured iron catalyst in Fischer-Tropsch synthesis

Kinetic parameters of nano-structured iron catalyst in Fischer-Tropsch synthesis (FTS) were studied in a wide range of synthesis gas conversions and compared with conventional catalyst. The conventional Fe/Cu/La catalyst was prepared by co-precipitation of Fe and Cu nitrates in aqueous media and Fe/Cu/La nanostructure catalyst was prepared by co-precipitation in a water-in-oil micro-emulsion. Nano-structured iron catalyst shows higher FTS activity. Kinetic results indicated that in FTS rate expression, the rate constant (k) increased and adsorption parameter (b) decreased by decreasing the catalyst particle size from conventional to nano-structured. Since increasing in the rate constant and decreasing in the adsorption parameter affected the FTS rate in parallel direction, the particle size of catalyst showed complicated effects on kinetic parameters of FTS reaction.     

偏钒酸钠对甲酸在Pd/C催化剂上氧化的电催化性能影响的机理

直接甲酸燃料电池的两大问题是Pd催化剂对甲酸氧化的电催化稳定性不好和Pd能催化甲酸分解。研究发现,当Pd/C在偏钒酸钠溶液中浸泡后能吸附上VO3-,吸附上VO3-的Pd/C催化剂对甲酸分解的催化性能会大大降低,由甲酸分解产生的CO的量也大大降低,使Pd/C催化剂被CO毒化的几率也大大降低,因此,在偏钒酸钠溶液中浸泡后的Pd/C催化剂对甲酸氧化的峰电流密度要比没有浸泡的Pd/C催化剂高13%左右。计时电流曲线的测量表明,6000 s时在偏钒酸钠溶液中浸泡后的Pd/C催化剂对甲酸氧化的峰电流密度要比没有浸泡的Pd/C催化剂高42%左右。结果证明,在偏钒酸钠溶液中浸泡能提高Pd/C催化剂对甲酸氧化的电催化活性,特别是电催化稳定性。