Palladium(II)‐N‐Heterocyclic Carbene Complexes: Efficient Catalysts for the Direct C‐H Bond Arylation of Furans with Aryl Halides

This paper contains the synthesis and characterization of the seven new benzimidazolium salts and their corresponding new palladium(II)‐NHC complexes with the general formula [PdX₂(NHC)₂], (NHC = N‐heterocyclic carbene, X = Cl or Br), and also their catalytic activity in direct C‐H bond arylation of 2‐substituted furan derivatives with aryl bromides and aryl chlorides. Under the optimal conditions, these palladium(II)‐NHC complexes showed the good catalytic performance for the direct C‐H bond arylation of 2‐substituted furans with (hetero)aryl bromides, and with readily available and inexpensive aryl chlorides. The C‐H bond arylation regioselectively produced C5‐arylated furans by using 1 mol% of the palladium(II)‐NHC catalysts in moderate to high yields.     

Synthesis of poly(ether ketone amide)s containing 4‐aryl‐2,6‐ diphenylpyridine moieties by a heterogeneous palladium‐catalyzed polycondensation of aromatic diiodides,aromatic diamines,and carbon monoxide

New aromatic poly(ether ketone amide)s containing 4‐aryl‐2,6‐diphenylpyridine units were prepared by the heterogeneous palladium‐catalyzed carbonylative polymerization of aromatic diiodides with ether ketone units, aromatic diamines bearing pyridine groups, and carbon monoxide. Polymerizations were performed in N,N‐dimethyl‐ acetamide (DMAc) at 120°C in the presence of a magnetic nanoparticles‐supported bidentate phosphine palladium complex [Fe₃O₄@SiO₂‐2P‐PdCl₂] as catalyst with 1,8‐diazabicycle[5,4,0]‐7‐undecene (DBU) as base and generated poly(ether ketone amide)s with inherent viscosities up to 0.79 dL/g. All the polymers were soluble in many organic solvents. These polymers showed glass transition temperatures between 219°C and 257°C and 10% weight loss temperatures ranging from 467°C to 508°C in nitrogen. These polyamides could be cast into transparent, flexible, and strong films from DMAc solution with tensile strengths of 86.4 to 113.7 MPa, tensile moduli of 2.34 to 3.19 GPa, and elongations at break of 5.2% to 6.9%. These polymers also exhibited good optical transparency with an ultraviolet‐visible absorption cut‐off wavelength in the 371 to 384‐nm range. Importantly, the new heterogeneous palladium catalyst can easily be recovered from the reaction mixture by simply applying an external magnet and recycled at least 8 times without significant loss of activity. Our catalytic system not only avoids the use of an excess of PPh₃ and prevents the formation of palladium black, but also solves the basic problems of palladium catalyst recovery and reuse.     

Triphenylphosphinopalladium(II) complexes with ONO‐donor ligands: syntheses,structures and catalytic applications in C?C cross‐coupling reactions

Reactions of 1‐((2‐hydroxy‐5‐R‐phenylimino)methyl)naphthalen‐2‐ols (H₂Lⁿ , n  = 1–3 for R = H, Me, Cl, respectively) with [Pd(PPh₃)₂Cl₂] and Et₃N in toluene under reflux produced three new mononuclear square‐planar palladium(II) complexes with the general formula [Pd(Lⁿ )(PPh₃)] ( 1 , R = H; 2 , R = Me; 3 , R = Cl). All the complexes were characterized using elemental analysis, solution conductivity and various spectroscopic (infrared, UV–visible and NMR) measurements. Molecular structures of 1 , 2 , 3 were confirmed using single‐crystal X‐ray diffraction analysis. In each complex, the fused 5,6‐membered chelate rings forming phenolate‐O, azomethine‐N and naphtholate‐O donor (Lⁿ )²⁻ and the PPh₃ form a square‐planar ONOP coordination environment around the metal centre. Infrared and NMR spectroscopic features of 1 , 2 , 3 are consistent with their molecular structures. Electronic spectra of the three complexes display several strong primarily ligand‐centred absorption bands in the range 322–476 nm. All the complexes were found to be effective catalysts for carbon–carbon cross‐coupling reactions of arylboronic acids with aromatic and heteroaromatic aldehydes to form the corresponding diaryl ketones. Copyright © 2016 John Wiley & Sons, Ltd.     

A new strategy to design a graphene oxide supported palladium complex as a new heterogeneous nanocatalyst and application in carbon–carbon and carbon‐heteroatom cross‐coupling reactions

The palladium nanoparticles were successfully stabilized with an average diameter of 6–7 nm through the coordination of palladium and terpyridine‐based ligands grafted on graphene oxide surface. The graphene oxide supported palladium nanoparticles were thoroughly characterized and applied as an efficient heterogeneous catalyst in carbon–carbon (Suzuki‐Miyaura, Mizoroki‐Heck coupling reactions) and carbon–heteroatom (C‐N and C‐O) bond‐forming reactions. The catalyst was simply recycled from the reaction mixture and was reused consecutive four times with small drop in catalytic activity.     

Synthesis of new fluorinated aromatic poly (ether ketone amide)s containing cardo structures by a heterogeneous palladium‐catalyzed carbonylative polycondensation

New fluorinated aromatic poly (ether ketone amide)s containing cardo structures were prepared by a heterogeneous palladium‐catalyzed polycondensation of fluorinated aromatic diiodides with ether ketone units, aromatic diamines containing cardo groups, and CO. Polymerizations were conducted in N,N‐dimethylacetamide at 120°C using 6 mol% of magnetic nanoparticles‐supported bidentate phosphine palladium (II) complex [Fe₃O₄@SiO₂‐2P‐PdCl₂] as catalyst and 1,8‐diazabicyclo[5,4,0]‐7‐undecene as base and resulted in fluorinated cardo poly (ether ketone amide)s with inherent viscosities up to 0.75 dL/g. All the polymers were readily soluble in many organic solvents and could afford transparent, flexible, and strong films by solution casting. These polymers showed good thermal stability with the glass transition temperature of 237°C–258°C, the temperature at 5% weight loss of 462°C–477°C in nitrogen. These polymer films also exhibited good mechanical properties, excellent electrical and dielectric performance, and high optical transparency. The incorporation of bulky fluorinated groups and cardo structures into polymer backbone has played an important role in the improvement of solubility, dielectric performance, and optical properties. Importantly, the heterogeneous palladium catalyst can easily be recovered from the reaction mixture by simply applying an external magnet and recycled up to 7 times without significant loss of catalytic activity.     

C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands prepared by different in situ bonding mechanisms and their use in catalytic (co)polymerization of norbornene and styrene

Two C–C bridged Ni(II) complexes bearing β‐keto‐9‐fluorenyliminato ligands with electron‐withdrawing groups (─CF₃), Ni{PhC(O)CHC[N(9‐fluorenyl)]CF₂}₂ (Ni 1 ) and Ni{CF₃C(O)CHC[N(9‐fluorenyl)]Ph}₂ (Ni 2 ), were synthesized by metal coordination reaction and different in situ bonding mechanisms. The C–C bridged bonds of Ni 1 were formed by in situ intramolecular trifluoromethyl and 9‐fluorenyl carbon–carbon cross‐coupling reaction and those of Ni 2 were formed by in situ intramolecular 9‐fluorenyl carbon–carbon radical coupling reaction mechanism. The obtained complexes were characterized using ¹H NMR spectroscopy and elemental analyses. The crystal and molecular structures of Ni 1 and Ni 2 with C–C bridged configuration were determined using X‐ray diffraction. Ni 1 and Ni 2 were used as catalysts for norbornene (NB) polymerization after activation with B(C₆F₅)₃ and the catalytic activities reached 10⁶ g_polymer mol_Ni^?1 h^?1. The copolymerization of NB and styrene catalyzed by the Ni 1 /B(C₆F₅)₃ system showed high activity (10⁵ g_polymer mol_Ni^?1 h^?1) and the catalytic activities decreased with increasing feed content of styrene. All vinyl‐type copolymers exhibited high molecular weight (10⁴ g mol^?1), narrow molecular weight distribution (M_w/M_n = 1.71–2.80), high styrene insertion ratios (11.13–50.81%) and high thermal stability (T_d > 380°C) and could be made into thin films with high transparency in the visible region (400–800 nm).     

Investigation of catalytic properties of two new orthopalladated complexes supported on montmorillonite: Synthesis,characterization and application in aerobic oxidation of alcohols

Two new complexes, [Pd(L₁)(C,N)]NO₃ ( 1 ) and [Pd(L₂)(C,N)]NO₃ ( 2 ) (L₁ = 5‐nitro‐1,10‐phenanthroline, L₂ = 4‐methyl‐1,10‐phenanthroline, C,N = benzylamine), have been synthesized and characterized using infrared and NMR spectroscopies and elemental analysis. Montmorillonite (MMT‐K10 clay) was used as a solid support for incorporating the cationic part of complexes 1 and 2 to produce catalysts 1 and 2 , respectively, as heterogeneous catalysts. Catalyst 1 was identified using powder X‐ray diffraction and scanning and transmission electron microscopies, and the content of palladium obtained from inductively coupled plasma analysis. By changing the electron‐donating group on the L₁ ligand with an electron‐withdrawing one, a minor improvement was observed in the catalytic properties. Catalyst 1 showed better efficiency for oxidation of benzyl alcohol in comparison with catalyst 2 , so catalyst 1 was used for the aerobic oxidation of alcohols to corresponding aldehydes or ketones without over‐oxidation (with and without bubbling of air). This catalytic system showed high activity towards alcohols under mild conditions. Finally, the reusability of catalyst 1 was investigated with multiple reuses of the supported catalyst in subsequent alcohol oxidation reactions.     

A mild and efficient palladium–triethylsilane system for reduction of olefins and carbon–carbon double bond isomerization

The versatility of palladium(II) acetate and palladium on activated charcoal catalysts with triethylsilane has been investigated in the hydrogenation and the isomerization of carbon–carbon double bond of 1‐alkenes. The reduction of 1‐alkenes was carried out in the presence of triethylsilane, ethanol and a catalytic amount of palladium(II) acetate or palladium on activated charcoal, at room temperature. This facile and efficient method affords high yields for hydrogenation of unsaturated alkenes to the corresponding alkanes. Then the carbon–carbon double bond isomerization of 1‐alkenes was tested using the same catalysts in the absence of solvent. The system palladium(II) acetate‐triethylsilane was found to be more effective compared with palladium on an activated charcoal–triethylsilane system at room temperature, while comparable results were obtained at 50 °C for both catalysts. Copyright © 2006 John Wiley & Sons, Ltd.     

Highly branched polyethylene graft copolymers prepared by means of migratory insertion polymerization combined with TEMPO‐mediated controlled radical polymerization

New families of highly branched polyethylenes containing alkyl short chain branches as well as polar and non‐polar long‐chain branches were prepared by combining migratory insertion copolymerization with controlled radical graft copolymerization. Key intermediate was a novel alkoxyamine‐functionalized 1‐alkene which was copolymerized with ethylene using a palladium catalyst. The resulting highly branched polyethylene with alkoxyamine‐functionalized short chain branches was used as macroinitiator to initiate controlled radical graft copolymerization of styrene and styrene/acrylonitrile. Novel polyethylene graft copolymers with molecular masses of M_w >100 000 g/mol and narrow polydispersities were obtained. Transmission electron microscopic studies (TEM) and the presence of two glass transition temperatures at –67 and +100°C indicated microphase separation.     

Synthesis of novel palladium N‐heterocyclic‐carbene complexes as catalysts for Heck and Suzuki cross‐coupling reactions

Novel palladium‐1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene (2a–c) and palladium‐1,3‐dialkylimidazolin‐2‐ylidene complexes (4a,b) have been prepared and characterized by C, H, N analysis, ¹H‐NMR and ¹³C‐NMR. Styrene or phenylboronic acid reacts with aryl halide derivatives in the presence of catalytic amounts of the new palladium‐carbene complexes, PdCl₂(1,3‐dialkylperhydrobenzimidazolin‐2‐ylidene) or PdCl₂(1,3‐dialkylimidazolin‐2‐ylidene) to give the corresponding C? C coupling products in good yields. Copyright © 2006 John Wiley & Sons, Ltd.     

Palladium nanoparticles deposited on a graphene–benzimidazole support as an efficient and recyclable catalyst for aqueous‐phase Suzuki–Miyaura coupling reaction

Graphene oxide was functionalized with benzimidazole for palladium immobilization. The resultant graphene–benzimidazole‐supported palladium composite (G‐BI‐Pd) was characterized using infrared and Raman spectroscopies, transmission electron microscopy and energy‐dispersive X‐ray spectroscopy. G‐BI‐Pd showed excellent catalytic activity and fast reaction kinetics in the aqueous‐phase Suzuki–Miyaura reaction of aryl iodides and bromides with phenylboronic acid under relatively mild conditions (5–25 min, 80 °C). The catalyst can be used several times without any significant loss of its catalytic activity.     

Catalytic Reduction of CN−, CO,and CO2 by Nitrogenase Cofactors in Lanthanide‐Driven Reactions

Nitrogenase cofactors can be extracted into an organic solvent to catalyze the reduction of cyanide (CN⁻), carbon monoxide (CO), and carbon dioxide (CO₂) without using adenosine triphosphate (ATP), when samarium(II) iodide (SmI₂) and 2,6‐lutidinium triflate (Lut‐H) are employed as a reductant and a proton source, respectively. Driven by SmI₂, the cofactors catalytically reduce CN⁻ or CO to C₁–C₄ hydrocarbons, and CO₂ to CO and C₁–C₃ hydrocarbons. The C C coupling from CO₂ indicates a unique Fischer–Tropsch‐like reaction with an atypical carbonaceous substrate, whereas the catalytic turnover of CN⁻, CO, and CO₂ by isolated cofactors suggests the possibility to develop nitrogenase‐based electrocatalysts for the production of hydrocarbons from these carbon‐containing compounds.     

A Three‐Dimensional Capsule‐like Carbon Nanocage as a Segment Model of Capped Zigzag [12,0] Carbon Nanotubes: Synthesis,Characterization, and Complexation with C70

Herein we report the synthesis and photophysical and supramolecular properties of a novel three‐dimensional capsule‐like hexa‐peri‐hexabenzocoronene (HBC)‐containing carbon nanocage, tripodal‐[2]HBC, which is the first synthetic model of capped zigzag [12,0] carbon nanotubes (CNTs). Tripodal‐[2]HBC was synthesized by the palladium‐catalyzed coupling of triboryl hexabenzocoronene and L‐shaped cyclohexane units, followed by nickel‐mediated C−Br/C−Br coupling and subsequent aromatization of the cyclohexane moieties. The physical properties of tripodal‐[2]HBC and its supramolecular host–guest interaction with C₇₀ were further studied by UV/Vis and fluorescence spectroscopy. Theoretical calculations revealed that the strain energy of tripodal‐[2]HBC was as high as 55.2 kcal mol⁻¹.     

A Three‐Dimensional Capsule‐like Carbon Nanocage as a Segment Model of Capped Zigzag [12,0] Carbon Nanotubes: Synthesis,Characterization, and Complexation with C70

Herein we report the synthesis and photophysical and supramolecular properties of a novel three‐dimensional capsule‐like hexa‐peri‐hexabenzocoronene (HBC)‐containing carbon nanocage, tripodal‐[2]HBC, which is the first synthetic model of capped zigzag [12,0] carbon nanotubes (CNTs). Tripodal‐[2]HBC was synthesized by the palladium‐catalyzed coupling of triboryl hexabenzocoronene and L‐shaped cyclohexane units, followed by nickel‐mediated C?Br/C?Br coupling and subsequent aromatization of the cyclohexane moieties. The physical properties of tripodal‐[2]HBC and its supramolecular host–guest interaction with C₇₀ were further studied by UV/Vis and fluorescence spectroscopy. Theoretical calculations revealed that the strain energy of tripodal‐[2]HBC was as high as 55.2 kcal mol^?1.     

Baeckeins J and K,Two Novel C‐Methylated Biflavonoids from the Roots of Baeckea frutescens and Their Cytoprotective Activities

Baeckea frutescens is an aromatic shrub used as ornamentals and as food flavor spices in the southern part of P. R. China. Two novel C‐methylated biflavonoids named baeckeins J ( 1 ) and K ( 2 ) were isolated from the roots of B. frutescens, which possessed the unique carbon skeleton conjugated of a flavonol and one isoflavanonol molecule via the linkages of C(2)–C(8*) and C(3)–O–C(7*). The structures of compounds 1 and 2 were elucidated by analysis of 1D‐ and 2D‐NMR, and HR‐ESI‐MS spectral data, and the absolute configuration for chiral C‐atoms C(2) and C(3) were assigned by CD spectrometry combined with quantum chemical calculations. In the bioassay, baeckeins J and K exhibited strong cytoprotective effects on H₂O₂‐induced oxidative cell death in PC12 cells.     

Electrochemical properties of LiFePO4/C synthesized using polypyrrole as carbon source

LiFePO₄/C composites were synthesized by pyrolysis of LiFePO₄/polypyrrole (PPy), which was obtained by an in situ chemical polymerization involving pyrrole monomer and hydrothermal synthesis LiFePO₄. All samples were characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, cyclic voltammetry, and galvanostatic charge–discharge techniques. The results showed the LiFePO₄/C sintered at 800 °C containing 2.8 wt.% carbon exhibited a higher discharge capacity of 49.6 mAh·g⁻¹ at 0.1 C, and bare LiFePO₄ only delivered 11.6 mAh·g⁻¹ in 2 M LiNO₃ aqueous electrolyte. The possible reason for the improvement of electrochemical performance was discussed and could be attributed to the formation of aromatic compounds during the carbonization of PPy.     

Conversion of Triple Bonds into Single Bonds in a Domino Carbopalladation with Norbornene

A domino carbopalladation reaction of haloalkynes is presented. Remarkably, the four‐time carbopalladation process converts the carbon‐carbon triple bonds of haloalkynes stepwise into carbon–carbon double bonds, and finally to carbon‐carbon single bonds. Features of this reaction are that the carbon‐carbon double bonds of stable vinyl palladium intermediates are transformed into carbon‐carbon single bonds with the generation of unstable alkyl palladium intermediates. The subsequently formed π‐allylpalladium species are independently trapped by N ‐tosylhydrazones, boronic acids, and B₂pin₂ in a highly diastereoselective manner, delivering the corresponding polycyclic and twisted products with a bicyclo[3.2.1]oct‐2‐en‐3‐yl)tricyclo[3.2.1.0^2,4]octane core skeleton in moderate to good yields via C−C and C−B bond formations. Significantly, the dual roles of norbornenes, ring construction and ring expansion, and the identification of electron‐rich tri(2‐furyl)phosphine as the ligand are found to be critical for the success of these transformations.     

Bifunctional coordination polymers as efficient catalysts for carbon dioxide conversion

The multidentate ligand H₂ L upon complexation with Zn (II) and Cd (II) provide a one‐dimensional polymeric networks. These coordination polymers (CPs) CP‐1 and CP‐2 containing Zn (II) and Cd (II) metals respectively are well characterized. The single crystal structural analysis confirms the formation of one‐dimensional coordination polymer with zigzag fashion in CP‐1 and ladder chain CP‐2 . Both the CPs are applied as catalysts to synthesize various cyclic carbonates from epoxides and carbon dioxide. The catalysts are giving better conversion under solvent‐free and additive‐free condition using 10 bar CO₂ and 100 °C as optimized pressure and temperature. The detailed kinetic experiments suggesting the first order kinetics, the energy of activation (Ea) is calculated for this catalytic conversion.     

Prefunctionalized Porous Organic Polymers: Effective Supports of Surface Palladium Nanoparticles for the Enhancement of Catalytic Performances in Dehalogenation

Three porous organic polymers (POPs) containing H, COOMe, and COO^? groups at 2,6‐bis(1,2,3‐triazol‐4‐yl)pyridyl (BTP) units (i.e., POP‐1, POP‐2, and POP‐3, respectively) were prepared for the immobilization of metal nanoparticles (NPs). The ultrafine palladium NPs are uniformly encapsulated in the interior pores of POP‐1, whereas uniform‐ and dual‐distributed palladium NPs are located on the external surface of POP‐2 and POP‐3, respectively. The presence of carboxylate groups not only endows POP‐3 an outstanding dispersibility in H₂O/EtOH, but also enables the palladium NPs at the surface to show the highest catalytic activity, stability, and recyclability in dehalogenation reactions of chlorobenzene at 25 °C. The palladium NPs on the external surface are effectively stabilized by the functionalized POPs containing BTP units and carboxylate groups, which provides a new insight for highly efficient catalytic systems based on surface metal NPs of porous materials.     

Spectral,crystallographic, theoretical and antibacterial studies of palladium(II)/platinum(II) complexes with unsymmetric diphosphine ylides

The reaction of α‐keto‐stabilized diphosphine ylides [Ph₂P(CH₂)_nPPh₂═C(H)C(O)C₆H₄‐p‐CN] (n = 1 (Y¹); n = 2 (Y²)) with dibromo(1,5‐cyclooctadiene) palladium(II)/platinum(II) complexes, [Pd/PtBr₂(cod)], in equimolar ratio gave the new cyclometalated Pd(II) and Pt(II) complexes [Br₂Pd(κ²‐Y¹)] ( 1 ), [Br₂Pt(κ²‐Y¹)] ( 2 ), [Br₂Pd(κ²‐Y²)] ( 3 ) and [Br₂Pt(κ²‐Y²)] ( 4 ). These compounds were screened in a search for novel antibacterial agents and characterized successfully using Fourier transfer infrared and NMR (¹H, ¹³C and ³¹P) spectroscopic methods. Also, the structures of complexes 1 and 2 were characterized using X‐ray crystallography. The results showed that the P,C‐chelated complexes 1 and 2 have structures consisting of five‐membered rings, while 3 and 4 have six‐membered rings, formed by coordination of the ligand through the phosphine group and the ylidic carbon atom to the metal centre. Also, a theoretical study of the structures of complexes 1 – 4 was conducted at the BP86/def2‐SVP level of theory. The nature of metal–ligand bonds in the complexes was investigated using energy decomposition analyses (EDA) and extended transition state combined with natural orbitals for chemical valence analyses. The results of EDA confirmed that the main portions of ΔE_int, about 57–58%, in the complexes are allocated to ΔE_elstat.