Magnetic Fe3O4 nanoparticles supported imine/Thiophene‐nickel (II) complex: A new and highly active heterogeneous catalyst for the synthesis of polyhydroquinolines and 2, 3‐dihydroquinazoline‐4(1H)‐ones

A new magnetically separable nickel catalyst (Ni(NO₃)_2?Imine/Thiophene‐Fe₃O₄@SiO₂) was readily prepared and structurally characterized by Fourier transform infrared spectroscopy (FT‐IR), Scanning electron microscopy (SEM), Energy‐dispersive X‐ray spectroscopy (EDX), Vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD) and Atomic absorption spectroscopy (AAS). The Ni(NO₃)_2?Imine/Thiophene‐Fe₃O₄@SiO₂ exhibited efficient catalytic activity in the synthesis of 2,3‐dihydroquinazoline‐4(1H)‐ones and polyhydroquinolines. Catalysis research under water and solvent‐free conditions makes also this synthetic protocol ideal and fascinating from the environmental point of view. The catalyst can be magnetically recovered after the reaction and can be reused for many times without appreciable decrease in activity.     

Preparation of 1,2,4,5‐tetrasubstituted imidazoles over magnetic core–shell titanium dioxide nanoparticles

Magnetic core–shell titanium dioxide nanoparticles (Fe₃O₄@SiO₂@TiO₂) were applied for the efficient preparation of 1,2,4,5‐tetrasubstituted imidazole derivatives by the one‐pot multi‐component condensation of benzil with aldehydes, primary amines and ammonium acetate under solvent‐free conditions. The catalyst was synthesized and studied using several techniques including X‐ray diffraction, transmission electron microscopy, field‐emission scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

Design,preparation and characterization of Cu/GA/Fe3O4@SiO2 nanoparticles as a catalyst for the synthesis of benzodiazepines and imidazoles

The synthesis and characterization of an efficient and reusable nanocatalyst, Cu/GA/Fe₃O₄@SiO₂, obtained by ultrasonic‐assisted grafting of guanidineacetic acid on modified Fe₃O₄@SiO₂ core–shell nanocomposite spheres and subsequent immobilization of Cu(II), are described. The catalyst was characterized by means of X‐ray diffraction, scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, elemental analysis, thermogravimetric analysis, Fourier transform infrared spectroscopy, vibrating sample magnetometry and inductively coupled plasma optical emission spectrometry. The prepared nanocatalyst facilitated an efficient and straightforward friendly procedure for the synthesis of benzodiazepines and imidazoles in ethanol and under solvent‐free conditions, respectively. The nanocatalyst can be easily recovered using a magnet and reused several times without any significant loss of activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Magnetically recoverable copper nanorods and their catalytic activity in Ullmann cross‐coupling reaction

A novel polydentate ligand supported on Fe₃O₄@SiO₂ was designed and demonstrated for the synthesis of Cu nanorods. The Fe₃O₄@SiO₂/EP.EN.EG@Cu was characterized using X‐ray diffraction, thermogravimetric analysis, transmission electron microscopy, energy‐dispersive X‐ray spectroscopy and vibrating sample magnetometry. The Fe₃O₄@SiO₂/EP.EN.EG@Cu showed excellent catalytic efficiency for the cross‐coupling reaction of nitrogen‐containing heterocycles with aryl halides. The catalyst could be effectively separated from the reaction mixture by simply applying an external magnetic field and reused at least five times without loss of activity.     

A highly reactive and magnetic recyclable catalyst based on silver nanoparticles supported on ferrite for N‐monoalkylation of amines with alcohols

Fe₃O₄@SiO₂‐Ag catalyst was found to be highly active and selective in the N ‐alkylation of amines with a variety of aromatic and linear alcohols. The heterogeneous nature of the Fe₃O₄@SiO₂‐Ag catalyst allows easy recovery and regeneration by applying an external magnet for six subsequent reaction cycles. The prepared catalyst was characterized using electron microscopy techniques, X‐ray diffraction, vibrating sample magnetometry and atomic absorption spectroscopy.     

Synthesis of a novel and reusable biological urea based acidic nanomagnetic catalyst: Application for the synthesis of 2‐amino‐3‐cyano pyridines via cooperative vinylogous anomeric based oxidation

In the current study, a novel and reusable biological urea based nano magnetic catalyst namely Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was designed and synthesized. The structure of the titled catalyst was fully characterized using several skills including Fourier transform infrared (FT‐IR) spectroscopy, energy dispersive X‐ray (EDX) analysis, X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo gravimetric analysis/differential thermal analysis (TG/DTG) and vibrating sample magnetometer (VSM). Then, the catalytic performance of Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was successfully inspected towards the multicomponent synthesis of 2‐amino‐3‐cyano pyridine derivatives through a vinylogous anomeric based oxidation pathway.     

Fe3O4@SiO2@l‐arginine@Pd(0): a new magnetically retrievable heterogeneous nanocatalyst with high efficiency for C–C bond formation

The surface of Fe₃O₄@SiO₂ nanoparticles was modified using l ‐arginine as a green and available amino acid to trap palladium nanoparticles through a strong interaction between the metal nanoparticles and functional groups of the amino acid. The proposed green synthetic method takes advantage of nontoxic reagents through a simple procedure. Characterization of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) was done using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analysis. The catalytic activity of Fe₃O₄@SiO₂@l ‐arginine@Pd(0) as a new nanocatalyst was investigated in C – C coupling reactions. Waste‐free, use of green medium, efficient synthesis leading to high yield of products, eco‐friendly and economic catalyst, excellent reusability of the nanocatalyst and short reaction time are the main advantages of the method presented. Copyright © 2016 John Wiley & Sons, Ltd.     

Gallic acid grafted to amine‐functionalized magnetic nanoparticles as a proficient catalyst for environmentally friendly synthesis of α‐aminonitriles

An effective approach of one‐pot catalytic Strecker reaction between aromatic aldehydes, aniline or toluidine and trimethylsilyl cyanide in the presence of amine‐functionalized Fe₃O₄@SiO₂ nanoparticles grafted with gallic acid (GA) as a powerful catalyst was developed. The fabricated reusable catalyst demonstrated high efficiency in the synthesis of α‐aminonitriles along with facile work‐up procedure. Fe₃O₄@SiO₂‐NH₂‐GA was characterized by Fourier transform‐infrared spectroscopy, scanning electron microscopy image, vibrating‐sample magnetometer curve, energy‐dispersive X‐ray analysis and thermogravimetric analysis.     

Nano‐Fe3O4@SiO2‐SO3H: A magnetic,reusable solid‐acid catalyst for solvent‐free reduction of oximes to amines with the NaBH3CN/ZrCl4 system

In this study, the immobilization of sulfonic acid on silica‐layered magnetite was carried out by the reaction of ClSO₃H with silica‐layered magnetite. The prepared magnetic nanoparticles of Fe₃O₄@SiO₂‐SO₃H were then characterized using scanning electron microscopy, energy dispersive X‐ray spectroscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, vibrating sample magnetometry, and transmission electron microscopy. The sulfonated nanocomposite exhibited excellent catalytic activity and reusability in the reduction of various aldoximes and ketoximes with NaBH₃CN in the presence of ZrCl₄. All reactions were carried out under solvent‐free conditions (r.t. or 75–80°C) within 3–70 min to afford amines in high to excellent yields.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Green,cost‐effective and efficient procedure for Heck and Sonogashira coupling reactions using palladium nanoparticles supported on functionalized Fe3O4@SiO2 by polyvinyl alcohol as a highly active,durable and reusable catalyst

A novel heterogenized organometallic catalyst was synthesized by coordinating palladium with polyvinyl alcohol‐functionalized Fe₃O₄@SiO₂ nanospheres. This novel catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscope, field emission scanning electron microscope, dynamic light scattering, UV–vis spectroscopy, X‐ray photoelectron spectroscopy, energy dispersive X‐ray analysis, thermogravimetric analysis and inductively coupled plasma analysis. The prepared palladium nanoparticles supported on polyvinyl alcohol functionalized Fe₃O₄@SiO₂ nanoparticles were successfully applied as a magnetically recyclable catalyst in Heck and Sonogashira coupling reactions in water. They showed remarkable activity toward aryl halides (I, Br, Cl) using very low palladium loading in excellent yields and demonstrated high TONs (mmol of product per mmol of catalyst). Also, the catalyst could be magnetically separated and reused seven times without any appreciable loss of catalytic activity.     

MgBr2 supported on Fe3O4@SiO2 ~ urea nanoparticle: An efficient catalyst for ortho‐formylation of phenols and oxidation of benzylic alcohols

Urea was successfully immobilized on the surface of chloropropyl‐modified Fe₃O₄@SiO₂ core–shell magnetic nanoparticles, then supported by MgBr₂ and acts as a unique catalyst for oxidation of benzylic alcohols to aldehydes and ketones, and ortho‐formylation of phenols to salicylaldehydes. The prepared catalyst was characterized by FT‐IR, transmission electron microscopy, scanning electron microscopy, X‐ray powder diffraction, dispersive X‐ray spectroscopy, CHN and TGA. It was found that Fe₃O₄@SiO₂ ~ urea/MgBr₂ showed higher catalytic activity than homogenous MgBr₂, and could be reused several times without significant loss of activity.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

The first urea‐based ionic liquid‐stabilized magnetic nanoparticles: an efficient catalyst for the synthesis of bis(indolyl)methanes and pyrano[2,3‐d]pyrimidinone derivatives

Urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles, {Fe₃O₄@SiO₂@(CH₂)₃‐Urea‐SO₃H/HCl}, as an unexceptionable and smooth releasing urea fertilizer in alkali soils was synthesized and fully characterized using Fourier transform infrared, UV–visible and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, atomic force microscopy and thermogravimetric analysis. The nanostructure catalyst as a novel, green and efficient catalyst was applied for the synthesis of bis(indolyl)methane derivatives via the condensation reaction between 2‐methylindole and aldehydes at room temperature under solvent‐free conditions. Also, pyrano[2,3‐d]pyrimidinone derivatives were prepared in the presence of the nanomagnetic urea‐based catalyst by the one‐pot three‐component condensation reaction of 1,3‐dimethylbarbituric acid, aldehydes and malononitrile under solvent‐free conditions at 60 °C. To the best of our knowledge, this is the first report of the synthesis of urea‐based ionic liquid stabilized on silica‐coated Fe₃O₄ magnetic nanoparticles. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of task‐specific fertilizer‐based nanomagnetic ionic liquids with desirable properties as unexceptionable substances for sustainable processes. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel CuFe2O4@SiO2‐OP2O5H magnetic nanoparticles: Preparation,characterization and first catalytic application to the synthesis of 1,8‐dioxo‐octahydroxanthenes

New functionalized magnetic core–shell nanoparticles, CuFe₂O₄@SiO₂‐OP₂O₅H, were prepared by grafting of phosphorus pentoxide on CuFe₂O₄@SiO₂ nanoparticles and characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma optical emission spectrometry and vibrating sample magnetometry. The catalytic activity of CuFe₂O₄@SiO₂‐OP₂O₅H as a novel catalyst was evaluated in the synthesis of 1,8‐dioxo‐octahydroxanthenes under solvent‐free conditions. The results showed that the catalyst has high activity and the desired products are obtained in high yields within short reaction times. The catalyst is readily recovered using magnetic decantation and can be used at least four times without noticeable deterioration in catalytic activity.     

Synthesis and characterization of a bifunctional nanomagnetic solid acid catalyst (Fe3O4@CeO2/SO42−) and investigation of its efficiency in the protection process of alcohols and phenols via hexamethyldisilazane under solvent‐free conditions

In this research, Fe₃O₄@CeO₂ (FC) was synthesized using the coprecipitation method and functionalized by an ammonium sulfate solution to achieve a heterogeneous solid acid Fe₃O₄@CeO₂/SO₄^2? (FCA) catalyst. The synthesized bifunctional catalyst was used in the protection process of alcohols and phenols using hexamethyldisilazane (HMDS) at ambient temperature under solvent‐free conditions. Due to its excellent magnetic properties, FCA can easily be separated from the reaction mixture and reused several times without significant loss in its catalytic activity. Excellent yield and selectivity, simple separation, low cost, and high recyclability of the nanocatalyst are outstanding advantages of this procedure. The characterization was carried out using different techniques such as Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), X‐ray diffraction (XRD), and vibrating sample magnetometry (VSM).     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.