The effects of polymer gel electrolyte composition on performance of quasi-solid-state dye-sensitized solar cells

Polymer gel electrolytes based on poly(acrylic acid)-poly(ethylene glycol) (PAA–PEG) hybrid have been prepared and applied to developed quasi-solid-state dye-sensitized solar cells (DSCs). PAA–PEG hybrid was synthesized by polymerization reaction. Quasi-solid-state DSCs were fabricated with synthesized PAA–PEG electrolyte. The effects of alkali iodides LiI, KI, and I₂ concentrations on liquid electrolyte absorbency and ionic conductivity of PAA–PEG were investigated. The evolution of the solar cell parameters with polymer gel electrolyte compositions was revealed. DSCs based on PAA–PEG with optimized KI/I₂ concentrations showed better performances than those with optimized LiI/I₂ concentrations. The electrochemical impedance spectroscopy technique was employed to examine the electron lifetime in the TiO₂ electrode and quantify charge transfer resistances at the TiO₂/dye/electrolyte interface and the counter electrode in the solar cells based on the PAA–PEG hybrid gels. A maximum conversion efficiency of 4.96% was obtained for DSCs using KI based quasi-solid electrolyte under 100 mW cm⁻². Our work suggests that KI can be the promising alkali metal iodide for improving the performance of PAA–PEG hybrid gel DSCs.     

P(VDF-HFP)基凝胶电解质染料敏化纳米TiO2薄膜太阳电池

采用循环伏安法(CV)研究了凝胶电解质中I₃-/I-氧化还原行为,凝胶电解质中I₃-/I-的表观扩散系数和相应的稳态扩散电流明显低于液体电解质.通过对阴/阳离子的结合能和孔穴阻塞作用的研究解释了凝胶电解质电导率较液体电解质发生变化的原因.制备的凝胶电解质电池具有较高的光电转换效率(6.6%),其短路电流密度(Jsc)仅比液体电解质电池低0.3-0.4 mA/cm²,电池效率也仅低约0.6%.     

Polyethyleneoxide (PEO)-based, anion conducting solid polymer electrolyte for PEC solar cells

Solid polymer electrolyte membranes were prepared by complexing tetrapropylammoniumiodide (Pr₄N⁺I^?) salt with polyethylene oxide (PEO) plasticized with ethylene carbonate (EC), and these were used in photoelectrochemical (PEC) solar cells fabricated with the configuration glass/FTO/TiO₂/dye/electrolyte/Pt/FTO/glass. The PEO/Pr₄N⁺I^?+I₂?=?9:1 ratio gave the best room temperature conductivity for the electrolyte. For this composition, the plasticizer EC was added to increase the conductivity, and a further conductivity enhancement of four orders of magnitude was observed. An abrupt increase in conductivity occurs around 60–70 wt% EC; the room temperature conductivity was 5.4?×?10^?7 S cm^?1 for 60 wt% EC and 4.9?×?10^?5 S cm^?1 for the 70 wt% EC. For solar cells with electrolytes containing PEO/Pr₄N⁺I^?+I₂?=?9:1 and EC, IV curves and photocurrent action spectra were obtained. The photocurrent also increased with increasing amounts of EC, up to three orders of magnitude. However, the energy conversion efficiency of this cell was rather low.     

A novel composite polymer electrolyte containing room-temperature ionic liquids and heteropolyacids for dye-sensitized solar cells

A novel composite polymeric gel comprising room-temperature ionic liquids (1-butyl-3-methyl-imidazolium-hexafluorophosphate, BMImPF₆) and heteropolyacids (phosphotungstic acid, PWA) in poly(2-hydroxyethyl methacrylate) matrix was successfully prepared and employed as a quasi-solid state electrolyte in dye-sensitized solar cells (DSSCs). These composite polymer electrolytes offered specific benefits over the ionic liquids and heteropolyacids, which effectively enhanced the ionic conductivity of the composite polymer electrolyte. Unsealed devices employing the composite polymer electrolyte with the 3% content of PWA achieved the solar to electrical energy conversion efficiency of 1.68% under irradiation of 50 mW cm⁻² light intensity, increasing by a factor of more than three compared to a DSSC with the blank BMImPF₆-based polymer electrolyte without PWA. It is expected that these composite polymer electrolytes are an attractive alternative to previously reported hole transporting materials for the fabrication of the long-term stable quasi-solid state or solid state DSSCs.     

A polymer electrolyte containing ionic liquid for possible applications in photoelectrochemical solar cells

Various iodide ion conducting polymer electrolytes have been studied as candidate materials for fabricating photoelectrochemical (PEC) solar cells and energy storage devices. In this study, enhanced ionic conductivity values were obtained for the ionic liquid tetrahexylammonium iodide containing polyethylene oxide (PEO)-based plasticized electrolytes. The analysis of thermal properties revealed the existence of two phases in the electrolyte, and the conductivity measurements showed a marked conductivity enhancement during the melting of the plasticizer-rich phase of the electrolyte. Annealed electrolyte samples showed better conductivity than nonannealed samples, revealing the existence of hysteresis. The optimum conductivity was shown for the electrolytes with PEO:salt = 100:15 mass ratio, and this sample exhibited the minimum glass transition temperature of 72.2 °C. For this optimum PEO to salt ratio, the conductivity of nonannealed electrolyte was 4.4 × 10⁻⁴ S cm⁻¹ and that of the annealed sample was 4.6 × 10⁻⁴ S cm⁻¹ at 30 °C. An all solid PEC solar cell was fabricated using this annealed electrolyte. The short circuit current density (I _SC), the open circuit voltage (V _OC), and the power conversion efficiency of the cell are 0.63 mA cm⁻², 0.76 V, and 0.47% under the irradiation of 600 W m⁻² light.     

Preparation of a novel polymer gel electrolyte based on N-methyl-quinoline iodide and its application in quasi-solid-state dye-sensitized solar cell

Using poly(acrylonitrile-co-styrene) as polymer host, 1,2-propanediol carbonate, dimethyl carbonate and ethylene carbonate as mixture solvent, N-methyl-quinoline iodide and iodine as the source of I⁻/I₃ ⁻, a novel polymer gel electrolyte with ionic conductivity of 5.12 × 10⁻³ S· cm⁻¹ at 25°C was prepared by sol-gel and hydrothermal methods. Based on the polymer gel electrolyte, a quasi-solid-state dye-sensitized solar cell was fabricated. The solar cell possess better long-term stability and light-to-electrical energy conversion efficiency of 4.04% under irradiation of 100 mW· cm⁻². The influences of polymer host, solvent, N-methyl-quinoline iodide and temperature on ionic conductivity of the polymer gel electrolyte and the performance of the dye-sensitized solar cell was discussed.     

Freezing points,osmotic coefficients,and activity coefficients of some salts in ethylene carbonate: A high dielectric constant solvent without hydrogen bonding

The freezing points, conductivities, and densities of NaI, KI, CsI, Bu₄NCl, Bu₄NBr, Bu₄NI, Et₄NBr, and Pr₄NBr (where Et = ethyl, Pr = propyl, and Bu =n-butyl) in ethylene carbonate have been measured. Osmotic and activity coefficients were calculated from the results. All of the salts studied are strong electrolytes. The trends in the osmotic coefficients of the alkali metal iodides are NaI>KI>CsI, showing that Na⁺ is more solvated by ethylene carbonate than Cs⁺. For the tetraalkylammonium halides, the order of osmotic coefficients are Et₄NBrPr₄NBrBu₄NCl>Bu₄NBr>Bu₄NI. This is the same order as observed in two other high-dielectric-constant solvents, water andN-methylacetamide. The results indicate that the smaller anions are more solvated than the larger anions in ethylene carbonate in contrast to the usual behavior of dipolar aprotic (basic) solvents, such as dimethyl sulfoxide.     

Electrical and Structural Properties of Poly (Methyl Methacrylate) Doped Potassium Iodide (KI) Solid Polymer Electrolyte

A high-conducting salt-doped polymer electrolyte layer has been created here for use in photocell technologies. The solution casting method is used to produce ion conducting film where poly (methyl methacrylate) (PMMA) is used as the host polymer and potassium iodide (KI) as the dopant. The conductivity and amorphic increases of the polymer electrolytes with the addition of salt concentrations helps in the enhancement of the charge transfer properties. Using electrochemical impedance spectroscopy (EIS), ionic conductivity is evaluated where maximum conductivity is 3.99 × 10⁻⁶ S cm^-1 at 20 wt% KI concentration. Polarized optical microscopy (POM) shows the reduction in crystallinity by salt doping, while Fourier transforms infrared spectroscopy (FTIR) shows the complexation as well as composite nature of the film. Ionic transference number (t_ion) measurement shows the predominantly ionic nature of this polymer electrolyte.     

Photovoltaic performance of dye-sensitized solar cells assembled by in-situ chemical cross-linking

Quasi-solid state dye-sensitized solar cells (DSSCs) were assembled by in-situ chemical cross-linking of a gel electrolyte precursor containing liquid electrolyte. The DSSCs assembled with this cross-linked gel polymer electrolyte showed higher open circuit voltage and lower short-circuit photocurrent density than those of DSSCs with liquid electrolyte. Addition of SiO₂ nanoparticles into the cross-linked gel polymer electrolyte significantly improved the photovoltaic performance and long-term stability of the DSSCs. The optimized quasi-solid state DSSC showed high conversion efficiency, 6.2% at 100 mW cm^?2 with good durability.     

Quantum dot doped solid polymer electrolyte for device application

ZnS capped CdSe quantum dots embedded in PEO:KI:I₂ polymer electrolyte matrix have been synthesized and characterized for dye sensitized solar cell (DSSC) application. The complex impedance spectroscopy shows enhance in ionic conductivity (σ) due to charges provide by quantum dots (QD) while AFM affirm the uniform distribution of QD into polymer electrolyte matrix. Cyclic voltammetry revealed the possible interaction between polymer electrolyte, QD and iodide/iodine. The photovoltaic performances of the DSSC containing quantum dots doped polymer electrolyte was also found to improve.     

High performance dye-sensitized solar cell based on 2-mercaptobenzimidazole doped poly(vinylidinefluoride-co-hexafluoropropylene) based polymer electrolyte

In this work, the influence of 2-mercaptobenzimidazole (2-MCBI) on poly(vinylidinefluoride-co-hexafluoropropylene)/KI/I₂ (PVDF-HFP/KI/I₂) polymer electrolytes were studied. The pure and different weight percentage ratios (20, 30, 40 and 50%) of 2-MCBI doped PVDF-HFP/KI/I₂ electrolytes were prepared by a solution casting technique. The as-prepared polymer electrolyte films were characterized using various techniques such as Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), X-ray diffractometer (XRD), alternating current (AC)-impedance analysis. The addition of 2-MCBI with pure PVDF-HFP/KI/I₂ was found to increase the ionic conductivity of electrolyte. Among the various additions, 30 wt% 2-MCBI doped PVDF-HFP/KI/I₂ showed the highest room temperature ionic conductivity values than the others. The dye-sensitized solar cell (DSSC) fabricated using this optimized polymer electrolyte achieved a high power conversion efficiency of 4.40% than the pure PVDF-HFP/KI/I₂ (1.74%) at similar experimental conditions. Thus, the 2-MCBI doped polymer electrolyte has proven to be an effective substitute to the liquid electrolyte in DSSCs.     

Halide-Free Synthesis of New Difluoro(oxalato)borate [DFOB]−-Based Ionic Liquids and Organic Ionic Plastic Crystals

The implementation of next-generation batteries requires the development of safe, compatible electrolytes that are stable and do not cause safety problems. The difluoro(oxalato)borate ([DFOB]⁻) anion has been used as an electrolyte additive to aid with stability, but such an approach has most commonly been carried out using flammable solvent electrolytes. As an alternative approach, utilisation of the [DFOB]⁻ anion to make ionic liquids (ILs) or Organic Ionic Plastic Crystals (OIPCs) allows the advantageous properties of ILs or OIPCs, such as higher thermal stability and non-volatility, combined with the benefits of the [DFOB]⁻ anion. Here, we report the synthesis of new [DFOB]⁻-based ILs paired with triethylmethylphosphonium [P₁₂₂₂]⁺, and diethylisobutylmethylphosphonium [P_122i4]⁺. We also report the first OIPCs containing the [DFOB]⁻ anion, formed by combination with the 1-ethyl-1-methylpyrrolidinium [C₂mpyr]⁺ cation, and the triethylmethylammonium [N₁₂₂₂]⁺ cation. The traditional synthetic route using halide starting materials has been successfully replaced by a halide-free tosylate-based synthetic route that is advantageous for a purer, halide free product. The synthesised [DFOB]⁻-based salts exhibit good thermal stability, while the ILs display relatively high ionic conductivity. Thus, the new [DFOB]⁻-based electrolytes show promise for further investigation as battery electrolytes both in liquid and solid-state form.     

Photoelectrochemical studies of ionic liquid-containing solar cells sensitized with different polypyridyl–ruthenium complexes

The efficiency of dye-sensitized nanocrystalline solar cells containing ionic liquids, composed of organic sulfonium or imidazolium iodides, or a standard organic-liquid-based electrolyte was studied, while using sensitizers based on different polypyridyl–ruthenium complexes. The dyes N-719, [cis-Ru(II)(H₂dcbpy)₂(NCS)₂(TBA)₂] and Z-907, [cis-Ru(II)(H₂dcbpy)(dnbpy)(NCS)₂, Z-907 having a more hydrophobic character, as well as a bidentate β-diketonato complex, [(dcbpy)₂Ru(acetylacetonate)]Cl⁻, was studied. Solar cells sensitized with the dye N-719 were more efficient than the Z-907 cells, for all electrolytes studied. Adding a co-adsorbent, the amphiphilic hexadecylmalonic acid (HDMA), to Z-907 solar cells containing an organic-liquid electrolyte resulted in increased overall light-to-electricity conversion efficiencies, from 3.7% to 4.0%, (100 W m⁻², AM 1.5). Possibly, this is caused by an insulating hydrophobic barrier formed to suppress unwanted electron losses. By applying TiO₂ (P25) nanoparticles, assumed to support electron transfer reactions, to the organic-liquid electrolyte, the conversion efficiency was increased from 4.1% to 4.6% (100 W m⁻², AM 1.5). In 1000 W m⁻² illumination, the highest overall short-circuit current density, 9.3 mA cm⁻², was achieved with the N-719 sensitized cells, with the TiO₂ nanocomposite-containing organic-liquid-based electrolyte. For solar cells sensitized with N-719, Z-907 or the β-diketonato complex, and containing imidazolium or sulfonium iodide ionic liquids, no improvements of the overall conversion efficiency could be noticed at addition of HDMA to the dye or nanoparticles to the electrolyte.     

Enhancement of photocurrent of polymer‐gelled dye‐sensitized solar cell by incorporation of exfoliated montmorillonite nanoplatelets

Poly(n‐isopropylacrylamide) (PNIPAAm) and its nanocomposite with exfoliated montmorillonite (MMT) were prepared by soap‐free emulsion polymerization and individually applied to gel the electrolyte systems for the dye‐sensitized solar cells (DSSCs). Each exfoliated MMT nanoplatelet had a thickness of ～ 1 nm, carried ～ 1.8 cation/nm², and acted like a two‐dimensional electrolyte. The DSSC with the LiI/I₂/tertiary butylpyridine electrolyte system gelled by this polymer nanocomposite had higher short‐circuit current density (J_sc) compared to that gelled by the neat PNIPAAm. The former has a J_sc of 12.6 mA/cm², an open circuit voltage (V_oc) of 0.73 V, and a fill factor (FF) of 0.59, which harvested 5.4% electricity conversion efficiency (η) under AM 1.5 irradiation at 100 mW/cm², whereas the latter has J_sc = 7.28 mA/cm², V_oc = 0.72 V, FF = 0.60, and η = 3.17%. IPCE of the nanocomposite‐gelled DSSC were also improved. Electrochemical impedance spectroscopy of the DSSCs revealed that the nanocomposite‐gelled electrolytes significantly decreased the impedances in three major electric current paths of DSSCs, that is, the resistance of electrolytes and electric contacts, impedance across the electrolytes/dye‐coated TiO₂ interface, and Nernstian diffusion within the electrolytes. The results were also consistent with the increased molar conductivity of nanocomposite‐gelled electrolytes. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 47–53, 2008     

A 7.72% efficient dye sensitized solar cell based on novel necklace-like polymer gel electrolyte containing latent chemically cross-linked gel electrolyte precursors

Novel necklace-like polymer gel electrolytes containing latent chemically cross-linked gel electrolyte precursors were prepared for quasi-solid dye sensitized solar cells with a highest efficiency of 7.72% and an active area of 0.25 cm2 under AM1.5 condition at 100 mW cm(-2) irradiation.     

Conductance of electrolytes in 1-propanol solutions from −40 to 25°C

Conductance data for solutions of LiCl, NaBr, NaI, KI, KSCN, RbI, Et₄NI, Pr₄NI, Bu₄NI, Bu₄NClO₄, n-Am₄NI, i-Am₄NI, n-Hept₄NI, Me₂Bu₂NI, MeBu₃NI, EtBu₃NI, i-Am₃BuNI, and i-Am₃BuNBPh₄ in 1-propanol at –40, –30, –20, –10, 0, 10, and 25°C are communicated and discussed. Evaluation of the data is performed on the basis of a conductance equation that includes a term in c^3/2. Single ion conductances at 25 and 10°C are determined with the help of transference numbers t _o ⁺ (KSCN/PrOH); the data are compared to data estimated by other methods. Ion-pair association constants and their temperature dependence are discussed in terms of contact and solvent separated ion pairs, and the role of non-coulombic forces is shown with the help of an appropriate splitting of the Gibbs energy of ion-pair formation.     

New lithium-conducting gel electrolytes containing superbranched polymers

New polymer gel electrolytes containing superbranched polymers were developed. The gel electrolyte containing 20 wt % superbranched polymer, 6 wt % methylmethacrylate, 4 wt % triethyleneglycol dimethacrylate, and 70 wt % 1 M propylene carbonate solution of LiClO₄ was found to have a maximum conductivity of ～9 × 10^?4 S/cm at room temperature and an effective activation energy of conductivity of 18 kJ/mol. The physicochemical properties of the gel electrolyte were correlated with its composition using electrochemical impedance spectroscopy, thermomechanics, and differential scanning calorimetry. The glass-transition temperature of these electrolytes depended only on the liquid electrolyte content and decreased from ?80 to ?93°C when the concentration of 1 M LiClO₄/PC increased from 60 to 80 wt %. As the content of the superbranched polymer increased from 0 to 20 wt % at positive temperatures, the modulus of elasticity decreased, while the conductivity increased. When the content of the superbranched polymer increased at the expense of the liquid electrolyte, the conductivity of the system decreased.     

A novel deep eutectic solvent-based ionic liquid used as electrolyte for dye-sensitized solar cells

We utilize a quaternary ammonium salt-derivative ionic liquid called G.CI which is a eutectic mixture of glycerol and choline iodide as electrolyte for dye-sensitized solar cells. Such eutectic compound belongs to a new series of ionic liquid called deep eutectic solvents (DES), which possess many outstanding features compared to the traditional imidazolium-based ionic liquids including cheap raw materials, simple preparation procedures and better biocompatibility. Current–voltage characteristics of the G.CI/PMII-based binary electrolytes stand at 0.533 V on V_oc, 12.0 mA cm^?2 on J_sc, 0.582 on fill factor, and 3.88% cell efficiency under AM 1.5, 100 mW/cm² illuminations. The comparable cell performance together with all the above advantages makes G.CI as a strong candidate for future electrolyte development for dye-sensitized solar cells (DSSCs).     

Cross-linking copolymers of acrylates’ gel electrolytes with high conductivity for lithium-ion batteries

The cross-linking gel copolymer electrolytes containing alkyl acrylates, triethylene glycol dimethacrylate, and liquid electrolyte were prepared by in situ thermal polymerization. The gel polymer electrolytes containing 15 wt% polymer content and 85 wt% liquid electrolyte content with sufficient mechanical strength showed the high ionic conductivity around 5?×?10^?3 Scm^?1 at room temperature. The gel electrolytes containing different polymer matrices were prepared, and their physical observation and conductivity were discussed carefully. The cross-linking copolymer gel electrolytes of alkyl acrylates with other monomers were designed and synthesized. The results showed that copolymerization can improve the mechanical properties and ionic conductivities of the gel electrolytes. The polymer matrices of gels had excellent thermal stability and electrochemical stability. The scanning electron microscope analysis showed the gel electrolyte was the homogeneous structure, and the cross-linking polymer host was the porous three-dimensional network structure, which demonstrated the high conductivity of the gel electrolytes. The gel polymer Li-ion battery was prepared by this in situ thermal polymerization. The cell exhibited high charge-discharge efficiency at 0.1 C. The results of LiFePO4-PEA-Li cell and graphite-PEA-Li cell showed that gel polymer electrolytes have good compatibility with the battery electrodes materials.     

The heat of mixing electrolytes: The cross-square rule in the solvent N-methylacetamide

The six possible heats of mixing of the system Na⁺, Pr₄N⁺?Br^?, I^? have been measured at 35°C in the solvent N-methylacetamide at an ionic strength of 0.5. The cross-square rule of T. F. Young^(1,2) does not hold accurately, and there are strong attractive forces between a cation and an anion. The largest effect in the heats of mixing is the formation of tetra-n-propylammonium iodide interactions. The data is compared to that of the Na⁺,K⁺?Cl^?,NO ₃ ^? system in water.