溶剂对SEBS/PMMA共混物薄膜形态的影响

采用原子力显微镜研究了聚（苯乙烯嵌-乙烯／丁烯嵌-苯乙烯）（SEBS）和聚甲基丙烯酸甲酯（PMMA）共混物不同溶剂旋转涂膜的表面形态和相分离行为。结果表明,用共混物的氯仿溶液旋转涂膜,可见明显的共混物的宏观相分离和SEBS的微观相分离形态。改变选择性溶剂可使旋涂膜具有不同的均匀度和形态结构,其相区的尺寸和形状相差甚大,有海岛型、网状、双连续状结构。AFM显示用环己烷／丁酮混合溶剂旋转涂膜,共混物的相分离最为彻底;用选择性溶剂氯仿时次之,但有明显的相分离;对SEBS和PMMA均无选择性的单一溶剂或混合溶剂则无明显相分离。     

氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物及其马来酸酐接枝共聚物增韧聚对苯二甲酸乙醇酯共混材料的辐射效应

采用双螺杆熔融共混的方法制备了含三羟甲基丙烷三丙烯酸酯(TMPTA)的聚对苯二甲酸乙二酯/氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物（PET/SEBS）和聚对苯二甲酸乙二酯/马来酸酐接枝氢化苯乙烯-丁二烯-苯乙烯嵌段共聚物（PET/SEBS-g-MAH）共混材料,并在Co-60源中对其进行辐照。 通过对共混材料的力学性能、相态结构测和凝胶含量分析,对比研究了辐射对以上2种共混材料结构及性能的影响。 扫描电子显镜观察和凝胶含量分析结果表明,在适量TMPTA存在时,辐射有效地改善了PET/SEBS体系的相容性。 冲击强度的变化证实了这种增容效应,当SEBS的质量分数为20%、TMPTA质量分数为1%,经50 kGy辐照后,冲击强度达到17.3 kJ/m2。 当在SEBS分子链上引入马来酸酐官能团,辐照后,体系的相态结构变化并不明显,冲击强度最大值仅为11.5 kJ/m2,明显低于不含马来酸酐官能团的体系。     

原子力显微镜与透射电镜对比研究嵌段共聚物微相分离形态

嵌段共聚物微观相分离形态结构由于其理论与应用中的重要性一直是人们研究的热点 [1] .本文研究的聚苯乙烯 -聚乙烯 /聚丁烯 -聚苯乙烯三嵌段共聚物 (SEBS)为聚苯乙烯 -聚丁二烯 -聚苯乙烯 (SBS)饱和加氢后的产物 .由于中间嵌段中的双键大多已加氢饱和 ,过去一直没有合适的染色剂进行染色 ,所以在 2 0世纪 80年代中期以前 ,SEBS形态结构未见文献报道 [1] .近年来 ,由于新型染色剂 Ru O4 的应用 ,使得用透射电镜 (TEM)观察其微相分离形态成为可能 .　　随着对嵌段共聚物形态结构认识程度深入 ,人们迫切希望能有新的手段提供更加丰富的…     

分子间相互作用对聚肽共聚物/聚苯乙烯衍生物共混体系自组装形貌影响的研究

合成了两亲性的聚(γ-苄基-L-谷氨酸酯)-b-聚乙二醇(PBLG-b-PEG)聚肽刚-柔嵌段共聚物和聚苯乙烯(PS)均聚物及多种聚苯乙烯衍生物,包括聚(4-乙酰氧基苯乙烯)(PAS)均聚物、聚(4-羟基苯乙烯)(PVPh)均聚物和聚(苯乙烯-co-4-乙酰氧基苯乙烯)(P(S-co-AS))共聚物.用傅里叶变换红外光谱(FTIR)、核磁共振氢谱(1H-NMR)和凝胶渗透色谱(GPC)等表征了聚合物的结构、分子量及分布.采用共溶剂溶解、选择性溶剂透析的方法,制备了PBLG-b-PEG嵌段共聚物与不同PS衍生物(包括PS均聚物)共混体系的自组装聚集体,利用透射电子显微镜(TEM)和扫描电子显微镜(SEM)等表征了自组装体的形貌和结构.研究发现,不同的分子间相互作用(如π-π共轭作用、偶极-偶极相互作用、氢键作用等)对共混体系的自组装形貌有显著的影响.PBLG-b-PEG/PS共混体系自组装可形成表面具有条纹结构的"毛线球"聚集体,该体系中PBLG和PS之间形成π-π共轭作用,相互作用强度相对较弱;PBLG-b-PEG/PAS共混体系自组装可形成表面基本光滑并有轻微凹陷的球形聚集体,该体系中PBLG和PAS之间除了π-π共轭作用,还可形成相对较强的偶极-偶极相互作用;而PBLG-b-PEG/PVPh共混体系自组装得到了囊泡,该体系中PBLG与PVPh之间可形成π-π共轭和氢键作用,相互作用强度进一步增强.对于PBLG-b-PEG/P(S-co-AS)共混体系,可通过改变P(S-co-AS)共聚物中AS摩尔分数和制备温度来调控自组装聚集体表面的条纹形貌.根据PBLG链段与不同PS衍生物(包括PS均聚物)之间不同的分子间相互作用,提出了上述聚集体形貌转变的机理.     

三嵌段共聚物在气-液界面的有序组装

将氢化的苯乙烯(PS)/丁二烯(PB)/苯乙烯(PS)三嵌段共聚物(SEBS)磺化,得到磺化的SEBS(S－SEBS),在水亚相上铺展了S－SEBS的Langmuir膜,研究其π－A特性.制备S－SEBS的Langmuir－Blodgett(LB)膜,用原子力显微镜(AFM)对其表面形态进行了研究,并以芘作为荧光探针研究了溶液和膜中S－SEBS聚集态的变化.研究结果表明,S－SEBS在气－液界面可以形成由两亲性的纳米小球组装而成的有序的二维和三维的纳米结构.对纳米结构形成的机理进行了初步分析.     

聚甲基丙烯酸甲酯/聚(苯乙烯-丙烯腈)共混体系相分离的特征动态流变响应

采用动态流变学方法,结合小角激光光散射(SALLS)测定,对聚甲基丙烯酸甲酯(PMMA)/聚(苯乙烯－丙烯腈)(SAN)共混体系的动态流变行为与相分离的关系进行了研究.发现在低频区域,时温叠加失效与共混物体系发生相分离有关,时温叠加失效温度T_b与用SALLS测定的浊点温度T_c一致,用低频区域动态储能模量G'与频率的关系[1gG'～lg(α_T)]偏离线性粘弹模型或时温叠加失效温度表征PMMA/SAN共混体系的相分离是有效的.     

SiO_2粒子对PMMA/SAN共混体系相分离行为的影响

采用小角激光光散射(SALLS)并结合动态流变学方法,考察了气相法二氧化硅(SiO2)粒子的加入对聚甲基丙烯酸甲酯/苯乙烯-丙烯腈无规共聚物(PMMA/SAN)共混体系相行为的影响,得到了添加SiO2粒子前后的相图,发现SiO2粒子对基体相行为的影响与基体的组成有关.对PMMA/SAN(60/40)体系,加入SiO2粒子后相分离温度上升,但并未改变相分离机理,仍为亚稳单相分解过程(spinodal decomposition,SD);而对于PMMA/SAN(30/70)体系,加入SiO2粒子后却降低了体系的相分离温度.该现象可能是SiO2粒子和基体组分界面间组成与PMMA/SAN共混物基体组成的差异造成的.     

聚甲基丙烯酸甲酯/聚(苯乙烯-马来酸酐)共混体系相分离的流变学行为

采用动态流变学方法, 对聚甲基丙烯酸甲酯(PMMA)/聚(苯乙烯-马来酸酐)(PSMA)共混体系的相行为进行了研究. 相分离温度由动态储能模量对温度曲线斜率的转折点确定. 结果表明， 表观相分离温度有很大的频率依赖性, 因此， 动态流变学方法应用于相分离温度测定时要外推到频率为零.     

PMMA/超支化聚(酯-酰胺)共混物薄膜中柱状相结构的形成

利用相差显微镜、三维形貌测量仪对聚甲基丙烯酸甲酯 超支化聚 (酯 酰胺 ) (PMMA HBP)共混物薄膜在玻璃基板作用下的相分离行为进行了研究 .结果表明 ,不同组分比的共混物薄膜会呈现不同的相形态和相分离过程 .当薄膜厚度在 5 0 0nm左右 ,HBP为低组分时 ,发现了一种特殊的分散相为圆柱状的相形态 ,并对该相形态出现的条件进行了研究 .认为基板与组分之间的相互作用和薄膜厚度决定了圆柱状结构形成 .     

嵌段共聚物苯乙烯-丁二烯-苯乙烯(SBS)/苯酰化聚苯醚共混分相动力学

<正> 对高分子-高分子共混体系相分离动力学过程的研究,人们一般局限于均聚物-均聚物,均聚物-无规共聚物共混体系,对于均聚物-嵌段共聚物共混体系的分相过程很少涉及。原因其一是很难找到具有临界相行为的嵌段共聚物-均聚物共混体系,其二是嵌段共聚物存在微相分离,使得宏观相分离动力学过程研究变得复杂。Paul的工作似乎为这方面的研究工作开辟了道路。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).