Eliminate the influence of zero-order diffraction for wavefront reconstruction with selectable magnification in digital holographic

The objective surface is considered as the scattering plane; frequency spectrum of a digital hologram transmission light is studied when the reference light and reconstruction wave are spherical waves. The relation between relevant parameters and the object light, conjugate object light and zero-order diffraction wave frequency spectrum distribution. The research results show that: each frequency spectrum of the diffracted wave broadens to various degrees as the radius of the reconstruction wavefront decreases, and frequency aliasing is generated under certain conditions. Based on the research results, a new method that carries out high-pass filtering processing without zero-order diffraction interference upon digital hologram is proposed and the reconstruction experimental proof for eliminating the interferential changeable magnification wave is given.     

基于频域方法的三维物体分层重现

基于频域方法实现了数字记录和再现三维物体离轴全息图.通过频谱对应关系求得各个面的频谱分布,使用数字滤波方法,成功地消除了零级衍射和共轭像;通过改变再现距离,分别获取了三维物体各个截面的再现像.     

用改进的Fienup迭代算法进行数字全息重建

数字全息成像中往往包括再现像、共轭像和零级项,再现像的分离是常见而又难以彻底解决的问题。提出一种新的全息图重建算法,即利用相干衍射成像（CDI）中的迭代方法处理数字全息图,实现仅有一个实像的再现结果,从而彻底解决该问题。该方法包括两个步骤：首先通过CCD分别测量样品单独存在、样品和参考光同时存在以及参考光的远场衍射分布;然后通过计算机进行迭代运算。由于干涉光的存在,该算法比传统的CDI算法有更快的收敛速度和重建质量。同时进行了数值模拟验证并对生物切片进行了物像重建。     

三维场景相息图的白光再现研究

讨论了相息图白光再现的可行性,得到采用在相息图和观察者之间加入狭缝的方法可实现相息图的白光再现的结论.提出了一种通过对彩虹全息图进行复数滤波来制作相息图的方法.根据彩虹全息图中物光的频谱宽度设计有限脉冲响应数字滤波器.对该滤波器进行移频,得到与通带位置物光的频谱位置一致的复系数带通滤波器.对全息图进行空域滤波,去除共轭像和零级,求出调制后物光的位相分布,制作场景相息图.实验观察到了经过此方法制作的相息图在白光下的再现像,表明本文的理论分析正确,所提出的方法可行.     

像面数字全息的重建相位误差分析和改善

像面数字全息是数字全息技术中常用的测量和成像方式,它通常采用离散傅里叶变换和频率滤波的方法进行物光波的重建.本文讨论了这些算法对重建相位的影响.首先分析了频谱泄露对于相位误差的影响,结果表明当采样周期为整数时,重建相位误差很小,因此具有极高的相位重建精度;而当不满足整周期采样时,相位重建误差有了明显的增加.为了改善频谱泄露所引起的相位误差,采用Hanning函数对数字全息图进行了预处理,结果表明Hanning窗的加入能够有效地提高重建相位的准确程度.     

数字全息波前重建中的像平面滤波技术研究

基于数字全息图的频谱平面滤波及像平面滤波技术,最近出现两种可变放大率的物光波前重建方法.为适应数字全息精细检测的要求,对两种滤波方法进行了研究,导出让局部重建图像布满重建平面的表达式.研究结果表明,像平面滤波技术优于频谱平面滤波技术,基于像平面滤波技术的重建方法能够按照需要的放大率高质量地重建局部物光场.给出彩色数字全...     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

Twin-image problem in digital holography—a survey(Invited Paper)

Zero-order and twin images are a serious obstacle in achieving a high-quality output in in-line digital holography （DH）. They decrease the useful bandwidth of the off-axis DH. Over the years the twin image removal problem was approached both by instrumental and numerical means. The paper provides an extended survey of the proposed solutions with their pros and cons as a guide for further advance in this field. Processing of a single spatial carrier fringe pattern involves spatial filtering in the frequency domain, spatial phase-shifting （PS） or wavelet transform. A point source digital holographic microscopy （DHM）, introduction of calibration measurements or various modifications of PS technique are instrumental solutions to the twin image problem for in-line DH. Numerical solutions to the same problem include iterative and non-iterative approaches, diffraction-based and inverse problem solutions, reconstruction of purely real or phase objects and of complex objects, reconstruction of plane and volume objects. Elimination only of the zero-order image relies on non-linear filtering or additional calibration measurements.     

基于图像处理的频域有限差分法用于实际光子晶体光纤的研究

提出了一种基于图像处理算法和频域有限差分法相结合研究实际光子晶体光纤的数值分析方法.该方法针对实际光子晶体光纤由于结构不规则难以进行数值分析的缺点.采取首先对光子品体光纤的电镜扫描图像使用阈值分割和维纳滤波等图像处理算法获得光纤截面的几何网像.然后使用图像插值及构造均值移动窗口滤波等方法实现了网格划分和介电系数平均等步骤,最后结合频域有限差分法对光纤特性进行分析计算.结果表明,该方法能够精确分析实际光子晶体光纤的色散特性.模拟得到的实际光子晶体光纤的模场分布与实验结果吻合很好.     

基于有限脉冲响应滤波器的数字全息零级像消除

针对数字全息中零级像的存在影响数字再现像的质量,分析数字全息图的记录、再现原理及频谱特性,提出了一种利用有限脉冲响应滤波器消除全息图数字再现中零级像的方法.该方法只需记录一幅数字全息图,不需要相移器材或其他辅助设备,直接利用数字图像处理对数字全息图在空域进行预处理,消除全息再现时的零级像干扰.对比了数字模拟和实验拍摄到的全息图在应用有限脉冲响应滤波器消除零级像前后的再现结果,表明该方法可消除零级衍射像,改善重建像质量,并且算法简单.     

The elimination of zero-order diffraction of 10.6 μm infrared digital holography

A new method of eliminating the zero-order diffraction in infrared digital holography has been raised in this paper. Usually in the reconstruction of digital holography, the spatial frequency of the infrared thermal imager, such as microbolometer, cannot be compared to the common visible CCD or CMOS devices. The infrared imager suffers the problems of large pixel size and low spatial resolution, which cause the zero-order diffraction a severe influence of the reconstruction process of digital holograms. The zero-order diffraction has very large energy and occupies the central region in the spectrum domain. In this paper, we design a new filtering strategy to overcome this problem. This filtering strategy contains two kinds of filtering process which are the Gaussian low-frequency filter and the high-pass phase averaging filter. With the correct set of the calculating parameters, these filtering strategies can work effectively on the holograms and fully eliminate the zero-order diffraction, as well as the two crossover bars shown in the spectrum domain. Detailed explanation and discussion about the new method have been proposed in this paper, and the experiment results are also demonstrated to prove the performance of this method.     

提高数字全息再现像像质的两步相移迭代算法

在两步相移数字全息术中,相移误差直接影响着零级像和共轭像的消除.为了消除相移误差,获得实际相移值,提出了一种基于相位统计特性的两步相移迭代算法.首先利用全息图的相位统计特性计算出初始相移值,然后用数字全息图再现像抽样点强度偏差之和作为评价标准,通过迭代计算寻找参考光的真正相移值.该算法能对任意未知相移量进行提取,从而有效地消除零级像和共轭像,提高了再现像质量.理论分析和光学实验结果证明了该方法的可行性和有效性.     

Stokes参量数字全息法实现相位物体成像

为实现对相位物体的无损检测和成像,克服数字同轴全息相位物体成像技术在消除零级像和孪生像的干扰时存在的系列问题,提出一种基于Stokes参量的新的数字同轴全息技术。该方法区别于传统的利用干涉光场来记录原始像项的数字全息方法,通过测量物参光合成光束的Stokes参量来分别得到这两束光的振幅和相位差,从而准确、唯一地获得原始像项;再利用数字再现即可重构物光的振幅和相位信息。实验中对弱吸收的相位样品进行了测量,得到样品清晰的振幅和相位分布。结果表明,采用该方法对相位物体进行数字全息再现,可以克服传统同轴全息图中零级像和共轭像对相位物体信息的严重干扰,对于提取相位物体的振幅和相位信息是可行和有效的。     

相移同轴无透镜傅里叶数字全息的分析与实验

应用菲涅耳衍射和全息理论，详细分析了无透镜傅里叶变换数字全息图的记录、再现方法和再现像的特点，分析了相移数字全息图的记录和再现方法，并进行了相应的实验验证。结果表明：直接对无透镜傅里叶数字全息图进行傅里叶逆变换可同时得到与物体完全相同的再现像及其共轭像；同轴无透镜傅里叶数字全息术能最大程度满足CCD对采样条件的要求，从而可以增大记录物体的尺寸，减小记录距离，明显提高再现像的清晰度和分辨率；相移数字全息术能有效地消除数字再现光场中的零级光场和共轭像，显著提高再现像的信噪比。条件许可时，相移同轴无透镜傅里叶数字全息术是目前解决数字全息术中再现像的分离与满足采样条件之间矛盾的最佳方法。     

Dual plane in-line digital holographic microscopy

We report a dual plane in-line digital holographic microscopy technique that exploits the method of subtraction of average intensity of the entire hologram to suppress the zero-order diffracted wave. Two interferograms are recorded at different planes to eliminate the conjugate image. The experimental results demonstrate successful reconstruction of phase objects as well as of amplitude objects. The two interferograms can be recorded simultaneously, using two CCD or CMOS sensors, in order to increase the acquisition rate. This enhanced acquisition rate, together with the improved reconstruction capability of the proposed method, may find applications in biomedical research for visualization of rapid dynamic processes at the cellular level.     

Reducing phase retrieval errors in Fourier analysis of 2-dimensional digital model interferograms

In order to measure the displacements of facets on a growing spherical Cu_2−δSe crystal with sub-nanometre resolution, we investigated the reliability and accuracy of standard method of Fourier analysis of digital laser interferograms. Guided by realistic experimental conditions (two-dimensional (2D) interferograms), starting from 2D model interferograms and using original custom designed Gaussian filtering window and multistage unwrapping procedure of the retrieved phase, we demonstrate for a considerable parameter range the non-negligible inherent phase retrieval error due to non-integer number of fringes within the digital image. Our results indicate an intermediate parameter range where the error is acceptably small. We introduce an algorithm modification that significantly reduces the error, especially for low and high fringe densities. In the experimentally most common case of diagonal fringes the reduced error is an order of magnitude smaller than for nearly one-dimensional case within almost entire parameter space.     

A novel coding method for high vividness three-dimensional holographic display

The quality of the reconstructed holographic three-dimensional image is seriously influenced by the noise. A novel encoded algorithm combining the Burch code with the four-step phase shifting method is presented to remove the noise and improve the contrast and resolution of the reconstructed image. The reconstructed three-dimensional images are compared with the results of the median filtering. The performance parameters of two methods are analyzed. The experimental results show that the zero-order light spot, conjugate image and speckle noise are suppressed effectively. The quality of the reconstructed image is noticeably improved.     

基于Hilbert变换实现数字全息高精度相位重建

为了提高数字全息相位重建精度,研究了基于Hilbert变换重建相位的理论和方法,并通过像面数字全息实验对该方法的有效性进行了验证,同时与数字全息常规重建方法得到的结果进行了比较.结果表明:Hilbert变换本身具有消除直流项的作用,对利用频域滤波滤除零级谱后的全息图进行Hilbert变换,能够彻底消除零级衍射项的干扰,从而提高相位重建精度.与常规重建结果相比,基于Hilbert变换的相位重建结果的标准偏差降低了14.0%.本文结果对提高数字全息相位重建精度具有重要的指导意义.     

散射光彩色数字全息光学系统及波面重建算法研究

令物体表面为散射面,参考光及重建光为球面波,详细研究了离轴数字全息物光场重建平面的光波场.导出物光、共轭物光及零级衍射光分布与光学系统参数的关系.根据彩色数字全息的特点,提出抑制零级衍射干扰的光学系统设计方法,并且对一种能够避免插值误差的波面重建算法进行了优化研究,给出了相应的实验证明.     

Research on three-dimensional shape reconstruction of circular cylindrical flaw

In this article, three-dimensional Born inverse scattering method is modified to convenient form for a cylindrical specimen that includes three-dimensional defect. One aluminum cylinder with flaw model is prepared and ultrasonic measurements are carried out. The measurement area in the modified methods is restricted in the plane perpendicular to the axis of cylindrical specimen. That’s to say that the method is modified to convenient form to use measured waveforms in the x₁ − x₂ plane. The measured wave data are fed into the inversion method and cross-sectional images are obtained. Then, three-dimensional shape reconstruction of flaw model in aluminum specimen is performed by piling up the cross-sectional images. At the same time, we get the numerical results from all directions by finite element method.