Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Vinyl polymerization of norbornene with nickel catalysts bearing [N,N] six-membered chelate ring: Important influence of ligand structure on activity

Norbornene polymerizations with nickel complexes bearing [N,N] six-membered chelate ring activated with methylaluminoxane were investigated. The influence of ligand structure such as β-diimine, β-diketiminate, fluorinated β-diketiminate, and anilido-imine ligand on catalytic activities for norbornene polymerization was evaluated in detail. Ligands led to different electrophilicity of the nickel metal center, and a relatively positive nickel metal center would result in high catalytic activities for norbornene polymerization. The influences of polymerization temperature and Al/Ni ratio on norbornene polymerization with nickel catalysts bearing β-diimine, β-diketiminate, and fluorinated β-diketiminate ligands were also examined. All of the obtained polymers catalyzed by these nickel catalysts bearing [N,N] ligand are vinylic addition polynorbornenes with different molecular weights.     

Metathesis polymerization of norbornene and terminal acetylenes catalyzed by bis(acetonitrile) complexes of molybdenum and tungsten

The ring-opening metathesis polymerization (ROMP) of norbornene catalyzed by bis(acetonitrile) molybdenum and tungsten complexes, [M(η³-C₃H₅)Cl(CO)₂(NCMe)₂] (1-Mo: M = Mo, 1-W: M = W), which have two labile acetonitrile ligands, has been investigated. These complexes catalyzed the ROMP of norbornene as a single-component initiator. The highly cis-selective polymerization proceeded in a THF solution (95% for 1-Mo and 96% for 1-W), whereas polymerization in CH₂Cl₂ or toluene resulted in lower cis selectivity. The polymerization of terminal acetylenes using these complexes was also examined. The tungsten complex 1-W showed a high catalytic activity for the polymerization of terminal acetylenes, such as phenyl- and tert-butylacetylene. A highly active catalytic system for the ROMP of norbornene was achieved by the activation of the tungsten complex, 1-W, with one equivalent of phenylacetylene, giving poly(norbornene) with a high molecular weight (M_n = 391 × 10⁴) and a high cis selectivity (cis  89%).     

Benchmarking of ruthenium initiators for the ROMP of a norbornenedicarboxylic acid ester

The kinetic study of ring-opening metathesis polymerization (ROMP) of a diester functionalised norbornene derivative, (±)-exo,endo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid diethyl ester, with a series of ruthenium benzylidene complexes revealed the applicability of these initiators for well defined polymerization reactions. Values for the rate of initiation as well as the rate of propagation of the initiators were determined and correlated to the molecular weight and polydispersity of the isolated polymers. As the only initiator providing an entry to virtually monodisperse polymers the classical “first generation Grubbs-catalyst” was identified, while N-heterocyclic carbene based initiators polymerized with a rate of propagation much higher than the rate of initiation yielding polymers with a broader molecular weight distribution.     

Polymerization induced phase separation (PIPS) in a polymer dispersed liquid crystal (PDLC) system: A Monte-Carlo simulation approach

The polymerization induced phase separation (PIPS) process in a polymer dispersed liquid crystal (PDLC) system was studied by using Monte-Carlo (MC) simulation methods. In particular, the dependence of the phase separation between liquid crystal and polymer on the parameters, such as temperature γ = ε/kT, polymerization reactivity p and curing time t_c, was examined. It was found that the pair correlation function G(a, t) decreases with the decrease of temperature when the polymerization reactivity p is fixed. Our results also revealed that at a constant temperature, the final value of G(a) first increases with the increasing of p, and finally approaches a constant value. This observation provides us an effective way of controlling the size of liquid crystal droplets as well as their distributions. It was observed that the equilibrium value of G(a) increases as the curing time increases when both temperature and p are kept constant. This is another way of controlling the size of liquid crystal droplets.     

Vinyl-polymerization of norbornene with novel anilido–imino nickel complexes/methylaluminoxane: Abnormal influence of polymerization temperature on molecular weight of polynorbornenes

Herein reported are investigations of norbornene polymerization by novel anilido–imino nickel complexes [(Ar¹NCHC₆H₄NAr²)NiBr]₂ (Ar¹ = Ar² = 2,6-dimethylphenyl, 1; Ar¹ = 2,6-dimethylphenyl, Ar² = 2,6-diisopropylphenyl, 2; Ar¹ = Ar² = 2,6-diisopropylphenyl, 3; Ar¹ = 2,6-diisopropylphenyl, Ar² = 2,6-dimethylphenyl, 4) activated with methylaluminoxane (MAO). It was found that at polymerization temperatures below 50 °C, the average molecular weights of the obtained polynorbornenes catalyzed by these four catalytic systems increase with raising temperature, displaying bimodal distribution in GPC curves. The abnormal influence of polymerization temperature could be attributed to the existence of two kinds of catalytic species: heterobimetallic species LNi(II)(μ-Me)₂AlMe₂ (I) and monometallic species LNi(II)Me (II) (L = anilido–imino ligand) at lower temperature. The former affords a lower molecular weight polymer and the latter higher molecular weight one. With raising polymerization temperature above 50 °C, the species I disappears and only species II exists in polymerization systems, resulting in a normal relation of molecular weight to polymerization temperature. From a kinetic study of the norbornene polymerization catalyzed by 1/MAO catalyst at 70 °C, the polymerization rate (R_p) can be expressed by the formulation: R_p = k[NBE]^1.93[Ni]^0.88. Moreover, the mechanism of the norbornene polymerization using the anilido–imino nickel complexes activated with MAO is also presented and discussed.     

四丁基碘化铵催化甲基丙烯酸甲酯的可逆-休眠自由基溶液聚合

以四丁基碘化铵(BNI) 为有机催化剂, 碘单质(I₂) 与偶氮二异庚腈(ABVN) 原位生成的碘代异庚腈为引发剂, 进行甲基丙烯酸甲酯(MMA) 的溶液聚合. 以甲苯为溶剂, MMA:I₂:ABVN的摩尔比为200:1:1.7, 考察了催化剂用量对聚合的影响. 结果表明, 加入催化剂可以缩短诱导期, 当I₂:BNI摩尔比为1:1时聚合反应的诱导期最短(1.7 h); 当BNI:I₂摩尔比为0.25:1~2:1之间时, 聚合物实测分子量与理论值十分接近, 分子量分布较窄, 分子量分布指数(M_w/M_n) 多在1.2以下. 考察了在N,N'-二甲基甲酰胺(DMF)、 四氢呋喃(THF)、 苯甲醚、 苯和甲苯5种溶剂中的聚合反应, 发现在苯和甲苯中聚合可控性最佳, M_w/M_n多在1.2以下; 苯甲醚和THF中聚合速率较快, 聚合物分子量分布较苯中的略宽. 以DMF为溶剂时所得聚合物分子量分布很宽, 聚合可控性差. 核磁共振分析聚合物为碘封端结构, 碘原子封端的聚合物链所占比为91.6%.     

苯胺基桥联双芳氧基稀土金属配合物的合成、表征及催化性能

通过配体前体苯胺基桥联双酚（PhN｛CH₂-（2-HO-C₆H₂-B{\mathrm{u}}_{\mathrm{2}}^t-3,5）｝₂,L¹H₂）与三硅胺基稀土金属配合物的质子交换反应,合成了苯胺基桥联双芳氧基稀土金属配合物,发现反应介质对反应的产物有明显的影响。L¹H₂与Ln［N（TMS）₂］₃（μ-Cl）Li（THF）₃以物质的量比1∶1在甲苯中90 ℃下反应,可以得到预期的苯胺基桥联双芳氧基稀土金属胺化物L¹LnN（TMS）₂（THF） （Ln=Yb（1）,Sm（2））。而L¹H₂与Sm［N（TMS）₂］₃（μ-Cl）Li（THF）₃以1∶1的物质的量比在四氢呋喃（THF）中50 ℃下反应,则得到钐-锂杂双金属配合物（THF）LiL¹₂Sm （3）。这些配合物均经过了红外光谱、元素分析和单晶结构测定的表征。发现配合物1和2可以有效地催化L-丙交酯和D,L-丙交酯的开环聚合,得到高相对分子质量的聚丙交酯。其中,配合物1对D,L-丙交酯的开环聚合显示很好的选择性,可以得到杂同含量（Pr）达到0.87的聚丙交酯。     

Synthesis and coordination of 2-diphenylphosphinopicolinamide

The synthesis and coordination of 2-diphenylphosphinopicolinamide (dpppa 1) is reported. Coordination complexes with Pd, Pt, Ru, Rh, Ir and Au are described. The ligand behaves as a monodentate P donor in complexes such as [PtCl₂(dpppa-P₂)], [PdCl(allyl)(dpppa-P)], [RuCl₂(p-Cymene)(dpppa-P)], cis-[PtCl₂(dpppa-P)(PR₃)] and [AuCl(dpppa-P)]. Bidentate P, O coordination was accomplished by reaction of BuLi with [RuCl₂(p-Cymene)(dpppa-P)], to give [RuCl(p-Cymene)(dpppa-P,O). P,N donor behaviour was achieved by reaction of a monodentate complex with a halide abstractor [AgBF₄] generating [RuCl(p-Cymene)(dpppa-P,N)][ClO₄] and[RhCl(η⁵-C₅Me₅)(dpppa-P,N)][BF₄]. The X-ray structures of dpppa, dpppaO, dpppaS, four monodentate complexes and [RuCl(p-Cymene)(dpppa-P,O) are reported. All of the structures contain intramolecular N–HN hydrogen bonding.     

硅烷类外给电子体对丙烯-丁烯序贯聚合的调控作用

外给电子体(ED)作为负载型Ziegler-Natta催化剂的一个重要组分, 在影响α-烯烃的催化活性及聚合物的立构规整性方面发挥着重要作用. 本文研究了4种不同结构及电子密度的硅烷类外给电子体[二甲基二甲氧基硅烷(D1)、 二丁基二甲氧基硅烷(D2)、 二苯基二甲氧基硅烷(D3)及二环戊基二甲氧基硅烷(D4)]对丙烯均聚及丙烯(一段)-丁烯(二段)序贯聚合的影响. 结果表明, ED对烯烃聚合的催化活性、 活性中心数及活性中心定向能力都具有显著的影响. 密度泛函理论(DFT)模拟计算表明, 随着ED的空间位阻和电子密度增加, ED在MgCl₂表面的吸附能降低, 吸附稳定性降低; ED的空间位阻和电子密度增加有利于提高丙烯聚合活性中心的定向能力, 当n(D4)/n(Ti)=20时, 合成的聚丙烯(PP)中的等规聚丙烯(iPP)组分含量达到92.8%. 当n(ED)/n(Ti)=15时, 丙烯聚合的聚合速率常数达到最大值; 具有更大空间位阻和电子密度的ED使得丙烯-丁烯序贯聚合的活性中心具有更强的定向能力, ED对丁烯(二段)聚合活性及聚丙烯/聚丁烯合金（PBA）中等规聚丁烯(iPB)组分的熔点影响更显著.     

Thermal cis—trans isomerization of bis(diamine) cobalt(III) and chromium(III) complexes in a solid phase

Thermal cis—trans isomerization of the simple bis(diamine) complexes [MX₂(aa or bb)₂]X · HX · n H₂O and the mixed bis(diamine) complexes [MX₂(aa)(bb)]X · HX · n H₂O was investigated in a solid phase, where M = Co(III) or Cr(III) ion, X = Cl or Br, aa and bb are one of the diamines selected from ethylenediamine (en), d, l-1,2-propane-diamine (pn), d,l-2,3-butanediamine (dl-bn), d,l-1,2-cyclohexanediamine (chxn), 1,3-propanediamine (ln) and d,l-2,4-pentanediamine (ptn), and n = 0–2. The information obtained may be summarized as follows. (1) The features of isomerization are considerably dependent upon the kind of metal ions, halide ions and diamines contained in the complexes. (2) Trans-cis isomerization was identified in the simple bis(diamine) complexes containing en, pn, dl-bn or chxn which can form five-membered chelate rings with metal ions, whereas cis-trans isomerization was detected in the simple bis(diamine) complexes containing tn or ptn which forms six-membered rings; all the mixed bis(diamine) complexes isomerize from trans to cis even when they have a combination of five- and six-membered chelate rings. (3) The cobalt(III) complexes isomerize in a temperature range of dehydration and/or dehydrohalogenation with activation energies of about 100 kJ mole⁻¹, whereas the chromium(III) complexes usually isomerize in the anhydrous state and the activation energies amount to as much as 150–190 kJ mole⁻¹. (4) “Aquation-anation” and “bond rupture” were proposed for the isomerization of the cobalt(III) and the chromium(III) complexes, respectively.     

具有三核Cd(Ⅱ)簇单元和螺旋链的脯氨酸类单一手性金属-有机框架材料的合成、 结构和性质

在溶剂热反应条件下, 使用含氮辅助配体1,4-二(4-吡啶基)苯(1,4-DPB)和半刚性脯氨酸衍生物配体(R)-5-(2-羧基吡咯烷-1-羰基)间苯二甲酸[(R)-H₃PIA]或(S)-5-(2-羧基吡咯烷-1-羰基)间苯二甲酸[(S)-H₃PIA]与Cd²⁺构筑了单一手性金属-有机框架材料[Cd_1.5((R)-PIA)(1,4-DPB)_1.5]·0.75H₂O·xGuest(1-D)和[Cd_1.5((S)-PIA)(1,4-DPB)_1.5]·0.75 H₂O·xGuest(1-L). 配合物1-D和1-L呈具有开放孔道的三维柱层式框架结构, 含有三核镉簇单元 Cd₃(CO₂)₆与两种螺旋链构建的波浪形Cd-PIA层. 分别对上述化合物进行了粉末X射线衍射、 热重分析、 圆二色谱和荧光光谱等测试. 测试结果显示配合物1-D和1-L都是以纯晶体的形式存在, 2种配合物的热失重曲线接近, 圆二色谱有明显的正负吸收峰, 符合其对映体的结构特征.     

Rod-like liquid crystals of organic transition metal complexes. I. Reversible transformation between blue smectogen and red nematogen

Two novel types of transition-metal-containing liquid crystals, bis(p-n-koxydithiobenzoato)nickel(II) (abbreviated as (C_nO-DTB)₂Ni), and (p-n-alkoxydithiobenzoato)(p-n-alkoxyperthiobenzoato)nickel(II) (abbreviated as (C_nO-DTB)(C_nO-PTB)Ni), were synthesized. It was found that the (C_nO-DTB)₂Ni complex for n = 8 has smectic H and C mesophases, and that the (C_nO-DTB)₂Ni complexes for n = 4 and 8 easily transform into the corresponding monoperthio complexes, _nO-PTB)Ni, by heating at temperatures between 230°C and 285°C. It was confirmed that the transformation originates from an intermolecular reaction between the (C_nO-DTB)₂Ni complexes at high temperatures, and that the origin of the extra sulphurs in the resulting (C_nO-DTB)(C_nO-PTB)Ni complexes is the neighbouring (C_nO-DTB)₂Ni complexes. Interestingly, each of the (C_nO-DTB)(C_nO-PTB)Ni complexes (n = 4 and 8), has nematic mesophase and exhibits a unique double melting behaviour via the nematic phase, which is the first example in liquid crystals. The reversible transformation between the blue smectic rod-like (C_nO-DTB)₂Ni complex and the red nematic Λ-like (C_nO-DTB)(C_nO-PTB)Ni complex is possible.     

Novel liquid-crystalline derivatives of transition metals. The effect of the molecular geometry of the ligands on the mesogenic properties of tetracoordinated copper(II) complexes

The synthesis, characterization and thermal behaviour of several new series of copper(II) complexes derived from carbonylic compounds and their Schiff's bases are reported. The complexes are of two types; [Cu(C₆H₃O(R)-C(X) = O)₂], (type I) and [Cu(C₆H₃O(R)-C(X) = N-R')₂] (type II) where R = - OOC-C₆H₄OC₁₀H₂₁-p, and the position of R is 4 or 5; R' = CH₃, n-C₁₀H₂₁, p-n-C₁₀H₂₁O(C₆H₄)-; X = H, CH₃. In type I complexes, only the compound with X = H and R in position 5 showed mesomorphism. For type II complexes, all the Schiff's bases complexes of copper(II) derived from 2,4-dihydroxybenzaldehyde showed thermotropic mesophases (smectic C and nematic), whereas the complexes derived from 2,5-dihydroxybenzaldehyde were only mesogenic when the imine was derived from methylamine. None of the complexes derived from the ketone (2,4 or 2,5-dihydroxy derivatives) showed liquid-crystalline properties. X-ray studies of four complexes of type II were carried out. The anisotropy of the magnetic susceptibility has a negative sign for complexes with R in position 4 and a positive sign for 2,5-derivative complexes. The relationship between molecular structure and mesomorphic behaviour is discussed.     

桥连双(酮亚胺)和双(二酮亚胺)及其铝配合物的合成与催化活性

通过桥连双β-二酮类化合物与取代苯胺反应, 合成了5个新的桥连双(β-单酮亚胺)化合物(1~5)和2个新的桥连双(β-二酮亚胺)化合物(6,7), 它们与三甲基铝反应, 得到了相应的3个双(β-酮亚胺基)二铝配合物(8~10)和2个双(β-二酮亚胺基)二铝配合物(11,12). 采用核磁共振、 红外光谱和质谱等对这些化合物进行了表征, 通过X射线单晶衍射分析证实了铝配合物的结构, 并考察了这些铝配合物在ε-己内酯开环聚合反应中的催化活性.     

Single-crystal X-ray structural refinement of the ‘tetragonal'' C60 polymer

The single crystals of the ‘tetragonal' C₆₀ polymer were prepared by the polymerization of C₆₀ single crystals under a pressure of 2.5 GPa at 500 °C. The X-ray structural analysis resulted in the orthorhombic space group Immm; a=9.026(2) Å, b=9.083(2) Å, c=15.077(3) Å, and Z=2; R1/wR2=0.0731/0.1719 for 654 observed reflections and 74 variables. The crystal structure represents a pseudo-tetragonal packing of translationally identical adjacent two-dimensional (2D) layers formed by the polymerization of C₆₀ molecules via [2+2] cycloaddition.     

The effect of trace levels of cyanide on the formation of mercury-iodide complexes

The interference of trace levels of cyanide with the formation of iodo-mercury complexes is made the basis of a method of trace analysis for cyanide. The decrease in absorbance of the iodo-mercury complexes is a linear function of total cyanide concentration up to about 5 × 10⁻⁵M in 0.1M sodium hydroxide medium when the iodide and mercury total concentrations are 0.05M and 3 × 10⁻⁵M respectively. Several cyano-mercury complexes are formed simultaneously, and quite a large fraction of the cyanide remains uncomplexed.     

Novel catalyst compositions for the syndiospecific polymerization of styrene prepared by the combination of cyclopentadenyl complexes of group IIA or group IIIA elements with titanium alkoxides

A highly reactive catalyst system, which induces the syndiospecific polymerization of styrene with high activity, has been found by the combination of cyclopentadienyl (Cp) complexes of group IIA or group IIIA elements with titanium alkoxides. The ¹H NMR monitoring of these reactions reveals the occurrence of a novel Cp‐transfer reaction that leads to the generation of Cp‐containing titanium complexes as catalysts for promoting the syndiospecific polymerization of styrene. Detailed in situ ¹H NMR studies reveal that the rate of the Cp‐transfer reaction is highly dependent on the steric bulkiness of the titanium alkoxide complexes, the structures of the Cp complexes of group IIA or group IIIA elements, and the polymerization temperature. Styrene polymerization studies also reveal that a more effective Cp‐transfer reaction can typically lead to the generation of a more highly reactive catalyst for sPS polymerization. This study provides a convenient method for the in situ generation of variable structures of Cp/titanium alkoxide complexes, which are difficult to synthesize by other methods. Most importantly, the mixture of a catalyst precursor can be directly used as an sPS polymerization catalyst without isolation and purification of Cp/titanium complexes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2304–2315, 2005     

Synthesis, characterization and antifungal activity of copper (II) complexes of sterically hindered o-diphenol derivatives

Cu (II) complexes with 3,5-di(tert-butyl)-1,2-benzenediol (I), 4,6-di(tert-butyl)-1,2,3-benzentriol (II) and sulfur-containing sterically hindered o-diphenol derivatives such as 4,6-di(tert-butyl)-3-(2-hydroxyethylsulfanyl)-1,2-benzenediol (III) and 2-[4,6-di(tert-butyl)-2,3-dihydroxyphenylsulfanyl]acetic acid (IV) have been synthesized and characterized by means of elemental analysis, TG/DTA, FT-IR, ESR, XPS, XPD and conductivity measurements. Antifungal activities of these ligands and their respective Cu (II) complexes have been determined against Aspergillus niger, Fusarium sp., Penicillium lividum, Mucor sp. and Botrytis cinerea. Most of the compounds (both the free ligands and the complexes) exert pronounced antifungal activities (RI  70%), and virtually all of them (apart from the Cu(L^II)₂ complex) have the highest inhibitory properties (RI = 100%) against B. cinerea.     

Oxidative addition of organic halides to zerovalent palladium complexes containing rigid bidentate nitrogen ligands

Zerovalent complexes of the type Pd(Ar-BIAN)(alkene), i.e. complexes containing the rigid bidentate nitrogen ligands bis(arylimino) acenaphthene (Ar = p-Tol, p-MeOC₆H₄, o-Tol,o,o′-Me₂C₆H₃, o,o′-ⁱPr₂C₆H₃) and an electron-poor alkene have been shown to react with a variety of (organic) halides RX, including methyl, benzyl, aryl, acyl and allylic halides, to give the corresponding square planar divalent Pd(R)X(Ar-BIAN) or [Pd(η³-allyl)(Ar-BIAN)]X complexes. The new complexes obtained have been fully characterized and their fluxional behaviour in solution studied by ¹H NMR spectroscopy. The rate of oxidative addition of iodomethane to Pd(p-Tol-BIAN)(alkene) complexes was found to decrease with increasing Pd-alkene bond strength, i.e. dimethyl fumarate fumaronitrile, but oxidative addition to the fumaronitrile complex was accelerated by irradiation with a mercury lamp. Oxidative addition of allylic ha