A Surface Enhanced Raman Scattering (SERS) microdroplet detector for trace levels of crystal violet

We report on a microfluidic platform that integrates a winding microdroplet chip and a surface-enhanced Raman scattering (SERS) detection system for trace determination of crystal violet (CV). Colloidal silver was applied to generate SERS. Compared to the continuous flow microfluidic system, the microdroplet based detection described here effectively eliminates any memory effects. Effects of flow pattern, droplet size, surfactant, and position of detection were optimized. Under optimal conditions, there is a linear correlation between signal and the concentration of CV in the 10 nM to 800 nM range, with a correlation coefficient (R²) of 0.9967. The limit of detection in water is 3.6 nM.

Waveguide confined Raman spectroscopy for microfluidic interrogation

We report the first implementation of the fiber based microfluidic Raman spectroscopic detection scheme, which can be scaled down to micrometre dimensions, allowing it to be combined with other microfluidic functional devices. This novel Raman spectroscopic detection scheme, which we termed as Waveguide Confined Raman Spectroscopy (WCRS), is achieved through embedding fibers on-chip in a geometry that confines the Raman excitation and collection region which ensures maximum Raman signal collection. This results in a microfluidic chip with completely alignment-free Raman spectroscopic detection scheme, which does not give any background from the substrate of the chip. These features allow a WCRS based microfluidic chip to be fabricated in polydimethylsiloxane (PDMS) which is a relatively cheap material but has inherent Raman signatures in fingerprint region. The effects of length, collection angle, and fiber core size on the collection efficiency and fluorescence background of WCRS were investigated. The ability of the device to predict the concentration was studied using urea as a model analyte. A major advantage of WCRS is its scalability that allows it to be combined with many existing microfluidic functional devices. The applicability of WCRS is demonstrated through two microfluidic applications: reaction monitoring in a microreactor and detection of analyte in a microdroplet based microfluidic system. The WCRS approach may lead to wider use of Raman spectroscopy based detection in microfluidics, and the development of portable, alignment-free microfluidic devices.     

Determination of Saxitoxin by Aptamer-Based Surface-Enhanced Raman Scattering

Saxitoxin is one of the most harmful paralytic shellfish toxins due to its high toxicity and adverse effects on the environment and human health. Aptasensors provide simple detection procedures because they have the advantages of chemical stability, easy synthesis and modification, and high convenience in signal transformation. Surface-enhanced Raman scattering (SERS) is an analytical technique that amplifies the analytical signals of molecules at extremely low concentrations, or even at the single molecule level, when the analyte is very close to rough metal surfaces or nanostructures. In this study, an SERS aptasensor is reported for the determination of saxitoxin for the first time. The optimized saxitoxin aptamer (M-30f) was modified on gold nanoparticles and served as the recognition element. Crystal violet was used as the Raman reporter without chemical bounding. The analytical principles of the aptasensor are that saxitoxin destabilized the conformations of the aptamer at high temperature conditions and altered the binding of crystal violet on the gold nanoparticles. In the presence of saxitoxin, the conformation of aptamer containing the G-quadruplex that selectively bound crystal violet unfolded to a large extent and hence the crystal violet molecules were released from gold nanoparticles with a reduced SERS signal. The effects of the gold nanoparticle size, the amount of DNA, aptamer density, sodium chloride concentration, and operation temperature upon the SERS determination were optimized. The resulting simple SERS aptasensor was developed with a satisfactory limit of detection (11.7?nM) and selectivity. The application for the analysis of real shellfish samples with simple procedures demonstrates that this SERS aptasensor is promising for on-site applications.     

Fast and sensitive trace analysis of malachite green using a surface-enhanced Raman microfluidic sensor

A rapid and highly sensitive trace analysis technique for determining malachite green (MG) in a polydimethylsiloxane (PDMS) microfluidic sensor was investigated using surface-enhanced Raman spectroscopy (SERS). A zigzag-shaped PDMS microfluidic channel was fabricated for efficient mixing between MG analytes and aggregated silver colloids. Under the optimal condition of flow velocity, MG molecules were effectively adsorbed onto silver nanoparticles while flowing along the upper and lower zigzag-shaped PDMS channel. A quantitative analysis of MG was performed based on the measured peak height at 1615 cm⁻¹ in its SERS spectrum. The limit of detection, using the SERS microfluidic sensor, was found to be below the 1–2 ppb level and this low detection limit is comparable to the result of the LC-Mass detection method. In the present study, we introduce a new conceptual detection technology, using a SERS microfluidic sensor, for the highly sensitive trace analysis of MG in water.     

Convenient formation of nanoparticle aggregates on microfluidic chips for highly sensitive SERS detection of biomolecules

Microfluidic chips combined with surface-enhanced Raman spectroscopy (SERS) offer an outstanding platform for rapid and high-sensitivity chemical analysis. However, it is nontrivial to conveniently form nanoparticle aggregrates (as SERS-active spots for SERS detection) in microchannels in a well-controlled manner. Here, we present a rapid, highly sensitive and label-free analytical technique for determining bovine serum albumin (BSA) on a poly(dimethylsiloxane) (PDMS) microfluidic chip using SERS. A modified PDMS pneumatic valve and nanopost arrays at the bottom of the fluidic microchannel are used for reversibly trapping gold nanoparticles to form gold aggregates, creating SERS-active spots for Raman detection. We fabricated a chip that consisted of a T-shaped fluidic channel and two modified pneumatic valves, which was suitable for fast loading of samples. Quantitative analysis of BSA is demonstrated with the measured peak intensity at 1,615 cm⁻¹ in the surface-enhanced Raman spectra. With our microfluidic chip, the detection limit of Raman can reach as low as the picomolar level, comparable to that of normal mass spectrometry.     

A microfluidic surface-enhanced Raman scattering (SERS) sensor for microRNA in extracellular vesicles with nucleic acid-tyramine cascade amplification

Exosomal microRNA (miRNA) is an ideal candidate of noninvasive biomarker for the early diagnosis of cancer. Sensitive and accurate sensing of abnormal exosomal miRNA plays essential role for clinical promotion due to its close correlation with tumor proliferation and progression. Herein, a microfluidic surface-enhanced Raman scattering (SERS) sensor was proposed for an on-line detection of exosomal miRNA based on rolling circle amplification (RCA) and tyramine signal amplification (TSA) strategy. The microfluidic chip consists of a magnetic enrichment chamber, a serpentine fluidic mixer and a plasmonic SERS substrate functionalized with capture probes. The released miRNA activates the capture probe, triggers RCA reaction, and generates a large number of single-stranded DNA products to drive the catalysis of nanotags deposition via TSA, producing numerous “hot spots” to enhance the SERS signals. In merit of the microfluidics chip and nucleic acid-tyramine cascade amplification, the developed SERS sensor significantly improves the sensitivity for the exosomal miRNA assay, resulting in a limit of detection (LOD) as low as 1 pmol/L and can be successfully applied in the analysis of exosomes secreted from breast tumor cells, which demonstrates the potential utility in practical applications.     

Towards quantitatively reproducible substrates for SERS

There is a need for a method to facilitate the development of novel, reproducible colloidal surface-enhanced Raman scattering (SERS) substrates to encourage the use of SERS in applied studies. In this study we show for the first time that by using suitably designed SERS experiments in conjunction with multivariate analysis of variance (MANOVA), an objective assessment of colloidal SERS reproducibility can be made. This is demonstrated with the analyte cresyl violet, but could be extended to any analyte of interest for which reproducible SERS data are needed.     

用表面增强拉曼散射研究电解法制备的纳米银膜

用一种廉价的电解方法制备了纳米银膜,并详细研究了在这种银膜上的表面增强拉曼散射效果．结晶紫为本实验的检测性分子．通过实验发现,这种银膜用便携式拉曼光谱仪测试并计算出的表面增强拉曼散射的增强因子为603,并对结晶紫的最小检出限为0．1nmol／L．     

SERS decoding of micro gold shells moving in microfluidic systems

In this study, in situ surface‐enhanced Raman scattering (SERS) decoding was demonstrated in microfluidic chips using novel thin micro gold shells modified with Raman tags. The micro gold shells were fabricated using electroless gold plating on PMMA beads with diameter of 15 μm. These shells were sophisticatedly optimized to produce the maximum SERS intensity, which minimized the exposure time for quick and safe decoding. The shell surfaces produced well‐defined SERS spectra even at an extremely short exposure time, 1 ms, for a single micro gold shell combined with Raman tags such as 2‐naphthalenethiol and benzenethiol. The consecutive SERS spectra from a variety of combinations of Raman tags were successfully acquired from the micro gold shells moving in 25 μm deep and 75 μm wide channels on a glass microfluidic chip. The proposed functionalized micro gold shells exhibited the potential of an on‐chip microfluidic SERS decoding strategy for micro suspension array.     

Au-coated ZnO nanorods on stainless steel fiber for self-cleaning solid phase microextraction-surface enhanced Raman spectroscopy

Solid phase microextraction-surface enhanced Raman spectroscopy (SPME–SERS), combining the pretreatment and determination functions, has been successfully used in environmental analysis. In this work, Au-coated ZnO nanorods were fabricated on stainless steel fiber as a self-cleaning SERS-active SPME fiber. The ZnO nanorods grown on stainless steel fiber were prepared via a simple hydrothermal approach. Then the obtained nanostructures were decorated with Au nanoparticles through ion-sputtering at room temperature. The obtained SERS-active SPME fiber is a reproducible sensitivity sensor. Taking p-aminothiophenol as the probe molecule, the RSD value of the SERS-active SPME fiber was 8.9%, indicating the fiber owned good uniformity. The qualitative and quantitative detection of crystal violet and malachite green was also achieved. The log–log plot of SERS intensity to crystal violet and malachite green concentration showed a good linear relationship. Meanwhile, this SERS-active SPME fiber can achieve self-cleaning owning to the excellent photocatalytic performance of ZnO nanorods. Crystal violet was still successfully detected even after five cycles, which indicated the high reproducibility of this SERS-active SPME fiber.     

Highly sensitive signal detection of duplex dye-labelled DNA oligonucleotides in a PDMS microfluidic chip: confocal surface-enhanced Raman spectroscopic study

Rapid and highly sensitive detection of duplex dye-labelled DNA sequences in a PDMS microfluidic channel was investigated using confocal surface enhanced Raman spectroscopy (SERS). This method does not need either an immobilization procedure or a PCR amplification procedure, which are essential for a DNA microarray chip. Furthermore, Raman peaks of each dye-labelled DNA can be easily resolved since they are much narrower than the corresponding broad fluorescence bands. To find the potential applicability of confocal SERS for sensitive bio-detection in a microfluidic channel, the mixture of two different dye-labelled (TAMRA and Cy3) sex determining Y genes, SRY and SPGY1, was adsorbed on silver colloids in the alligator teeth-shaped PDMS microfluidic channel and its SERS signals were measured under flowing conditions. Its major SERS peaks were observable down to the concentration of 10(-11) M. In the present study, we explore the feasibility of confocal SERS for the highly sensitive detection of duplex dye-labelled DNA oligonucleotides in a PDMS microfluidic chip.     

Detection of Exhaled Volatile Organic Compounds Improved by Hollow Nanocages of Layered Double Hydroxide on Ag Nanowires

To detect biomarkers from human exhalation, air flow dynamics on the nanoparticle surface were explored by a surface‐enhanced Raman scattering (SERS) sensor. A hollow Co‐Ni layered double hydroxide (LDH) nanocage on Ag nanowires (Ag@LDH) was prepared. Ag nanowires provided amplified Raman signals for trace determination; hollow LDH nanocages served as the gaseous confinement cavity to improve capture and adsorption of gaseous analytes. The Raman intensity and logarithmic analyte concentration exhibit an approximately linear relationship; the detection limit of SERS sensors for aldehyde is 1.9×10^?9 v/v (1.9 ppb). Various aldehydes in mixed mimetic gas are distinguished by Raman spectra statistical analysis assisted by multivariate methods, including principal component analysis and hierarchical cluster analysis. The information was recorded in a barcode, which can be used for the design and development of a desktop SERS sensor analysis system for large‐scale lung cancer detection.     

The ultratrace detection of crystal violet using surface enhanced Raman scattering on colloidal Ag nanoparticles prepared by electrolysis

Highly active,stable and affordable surface enhanced Raman scattering(SERS) substrates were obtained by electrolyzing a mixture of AgNO_3(4×10~(-4) mol/L) and Na_3C_6H_5O_7·H_2O(6×10~(-5) mol/L) for 1,2,3 and 4h at 7V.With crystal violet(CV) as a test molecule,a portable Raman spectrometer with 785 nm laser excitation was employed to carry out the SERS detection.Colloidal Ag nanoparticles prepared by electrolyzing for 3 h with the particle size of(65±17) nm is a perfect SERS substrate for the ultratrace ...     

结晶紫与卤素或卤酸根离子共吸附的近红外表面增强喇曼散射

采用近红外激光（１０６４ｎｍ）激发和扫描式双光栅单色仪研究了卤素、卤酸根离子及吡啶对结晶紫近红外表面增强喇曼散射光谱（ＮＩＲ－ＳＥＲＳ）的影响．揭示了这些离子（或分子）与结晶紫及银表面的相互作用．Ｃｌ－、Ｂｒ－、Ｉ－、ＢｒＯ－３离子及吡啶均能引起结晶紫ＮＩＲ－ＳＥＲＳ的明显增强，而ＣｌＯ－３和ＩＯ－３离子则不能．观察到ＮＩＲ－ＳＥＲＳ中化学增强的直接证据，并估算了化学增强因子．Ｃｌ－、Ｂｒ－、Ｉ－和ＢｒＯ－３离子引起结晶紫ＮＩＲ－ＳＥＲＳ的化学增强因子分别约为４９、７７、１５和３６．     

Recent strategies toward microfluidic‐based surface‐enhanced Raman spectroscopy

Surface‐enhanced Raman spectroscopy (SERS) is an extremely powerful analytical tool, which not only yields information about the molecular structure of the analyte in the form of characteristic vibrational spectrum but also gives sensitivities approaching those in fluorescence spectroscopy. The SERS measurement on the microfluidic platform provides possibility to manufacture the device with design perfectly fulfilling the needs of the application with minimal sample consumption. This review aims at describing basic strategies for SERS measurement in microfluidic devices published in the last decade and covers current trends in microfluidics with SERS detection in the field of bioanalysis and approaches toward on‐line coupling of liquid‐based separation techniques with SERS detection.     

Non-labeling multiplex surface enhanced Raman scattering (SERS) detection of volatile organic compounds (VOCs)

In this paper, we report multiplex SERS based VOCs detection with a leaning nano-pillar substrate. The VOCs analyte molecules adsorbed at the tips of the nano-pillars produced SERS signal due to the field enhancement occurring at the localized surface plasmon hot spots between adjacent leaning nano-pillars. In this experiment, detections of acetone and ethanol vapor at different concentrations were demonstrated. The detection limits were found to be 0.0017 ng and 0.0037 ng for ethanol and acetone vapor molecules respectively. Our approach is a non-labeling method such that it does not require the incorporation of any chemical sensing layer for the enrichment of gas molecules on sensor surface. The leaning nano-pillar substrate also showed highly reproducible SERS signal in cyclic VOCs detection, which can reduce the detection cost in practical applications. Further, multiplex SERS detection on different combination of acetone and ethanol vapor was also successfully demonstrated. The vibrational fingerprints of molecular structures provide specific Raman peaks for different VOCs contents. To the best of our knowledge, this is the first multiplex VOCs detection using SERS. We believe that this work may lead to a portable device for multiplex, specific and highly sensitive detection of complex VOCs samples that can find potential applications in exhaled breath analysis, hazardous gas analysis, homeland security and environmental monitoring.     

Metal-polymer nanocomposites for integrated microfluidic separations and surface enhanced Raman spectroscopic detection

The widespread development of microfluidics (microfluidics) has allowed the extension of efficient separations, fluid handling, and hyphenation with many detection modes to a small, portable, highly controllable physico-chemical platform. Surface enhanced Raman spectroscopy (SERS) offers the powerful advantage of obtaining vibrational spectroscopic information about analytes in an aqueous matrix with negligible background. The mating of electrophoretic separations with vibrational spectroscopy on a microfluidic device will allow the chromatographic efficiency of capillary electrophoresis (CE) with the unequivocal analyte "fingerprinting" capability of detailed structural information. By utilizing SERS as a means of detection, this work promises to yield redress for the hindrances of electrophoretic separations, including uncertainty in analyte band identification due to changing migration times as well as compromised detection sensitivity for non-fluorescent analytes. Our work represents the first steps toward developing CE-SERS on a microfluidic platform with a region of novel metal-pliable polymer nanocomposite SERS substrate fabricated directly into the device. The device fabrication material has been extensively employed by the microfluidics community for over five years. SERS detection can be achieved in real time or after the separations, with on-column laser-induced fluorescence employed as a secondary detection mode used for confirmation of efficiencies and band locations.     

In situ Raman spectroscopy of surfaces modified by ion soft landing

The design and characterization of a system for in situ Raman analysis of surfaces prepared by ion soft landing (SL) is described. The performance of the new high vacuum compatible, low cost, surface analysis capability is demonstrated with surface enhanced Raman spectroscopy (SERS) of surfaces prepared by soft landing of ions of crystal violet, Rhodamine 6G, methyl orange and copper phthalocyanine. Complementary in situ mass spectrometric information is recorded for the same surfaces using a previously implemented secondary ion mass spectrometer (SIMS). Imaging of the modified surfaces is achieved using 2D Raman imaging as demonstrated for the case of Rhodamine 6G soft landing. The combination of the powerful molecular characterization tools of SERS and SIMS in a single instrument fitted with in-vacuum sample transport capabilities, facilitates in situ analysis of surfaces prepared by ion SL. In particular, information is provided on the charge state of the soft landed species. In the case of crystal violet the SERS data suggest that the positively charged ions being landed retain their charge state on the surface under vacuum. By contrast, in the case of methyl orange which is landed as an anion, the SERS spectra suggest that the SL species has been neutralized.     

Quantitative Determination of Urine Glucose: Combination of Laminar Flow in Microfluidic Chip with SERS Probe Technique

A surface-enhanced Raman scattering(SERS) sensing approach for urine glucose was developed based on the laminar flow technology in a cross-type microfluidic chip with SERS probes, 4-mercaptophenylboronic acid (MPBA) functionalized Ag nanoparticles. MPBA as the glucose receptor can identify and bind up with glucose at a molar ratio of 2:1, which can cause the aggregation of SERS probes at a certain position of the chip channel and further enhance the SERS signal of MPBA significantly. Thus, the quantitative SERS detection of glucose was achieved indirectly. No sample pretreatment and separation were needed in this method since the SERS detection was achieved in the gradient diffusion and molecular recognition processes between urine glucose and SERS probe in the laminar flow, which simplified the sample treatment procedures, saved detection time and made it feasible for clinic applications. This method shows a good linear relationship within human body's normal physiological range and has high sensitivity and selectivity. The lowest detection concentration can reach 1.0 mg/dL.     

Surface-enhanced Raman scattering (SERS) optrodes for multiplexed on-chip sensing of nile blue A and oxazine 720

The fabrication and on-chip integration of surface-enhanced Raman scattering (SERS) optrodes are presented. In the optrode configuration, both the laser excitation and the back-scattered Raman signal are transmitted through the same optical fiber. The SERS-active component of the optrode was fabricated through the self-assembly of silver nanoparticles on the tip of optical fibers. The application of SERS optrodes to detect dyes in aqueous solution indicated a limit of quantification below 1 nM, using nile blue A as a molecular probe. Using the optrode-integrated microfluidic chip, it was possible to detect several different dyes from solutions sequentially injected into the same channel. This approach for sequential detection of different analytes is applicable to monitoring on-chip chemical processes. The narrow bandwidth of the vibrational information generated by SERS allowed solutions of different compositions of two chemically similar dyes to be distinguished using a dilution microfluidic chip. These results demonstrate the advantages of the SERS-optrode for microfluidics applications by illustrating the potential of this vibrational method to quantify components in a mixture.