An ionic surfactant-mediated Langmuir-Blodgett method to construct gold nanoparticle films for surface-enhanced Raman scattering

A gold nanoparticle film for surface-enhanced Raman scattering (SERS) was successfully constructed by an ionic surfactant-mediated Langmuir-Blodgett (LB) method. The gold film was formed by adding ethanol to a gold colloid/hexane mixture in the presence of dodecyltrimethylammonium bromide (DTAB). Consequently, gold nanoparticles (AuNPs) assembled at the water/hexane interface due to the decrease in surface charge density of AuNPs. Since DTAB binds the gold surface by a coulombic force, rather than a chemical bonding, it is easily replaced by target molecules for SERS purposes. The SERS enhancement factor of the 80 nm gold nanoparticle film was approximately 1.2 × 10(6) using crystal violet (CV) as a Raman dye. The SERS signal from the proposed DTAB-mediated film was approximately 10 times higher than that from the octanethiol-modified gold film, while the reproducibility and stability of this film compared to an octanethiol-modified film were similar. This method can also be applied to other metal nanostructures to fabricate metal films for use as a sensitive SERS substrate with a higher enhancement factor.     

Electrochemical Aptasensor for the Determination of Cocaine Incorporating Gold Nanoparticles Modification

A novel electrochemical aptasensor incorporating a signal enhancement for the determination of cocaine was designed. Gold nanoparticles were self‐assembled onto the surface of a gold electrode through 1,6‐hexanedithiol. A bifunctional derivative of the 32‐base cocaine‐binding aptamer with a redox‐active ferrocene moiety and a thiol linker group at the termini of the strand was self‐assembled onto the surface of gold nanoparticles. The oxidation peak current is linearly related to the concentration of cocaine from 1.0 to 15.0 μM with a detection limit of 0.5 μM. It was found that the sensitivity of the aptasensor with gold nanoparticles modification was ca. 10‐fold higher than that of the aptasensor without gold nanoparticles modification. This work demonstrates that gold nanoparticles‐assembled gold electrode provides a promising platform for immobilizing aptamer and enhancing the sensitivity.     

A novel electrochemiluminescence aptasensor for protein based on a sensitive N-(aminobutyl)-N-ethylisoluminol-functionalized gold nanoprobe

A novel electrochemiluminescence (ECL) aptasensor for platelet-derived growth factor B chain (PDGF-BB) assay was developed by assembling N-(aminobutyl)-N-ethylisoluminol functionalized gold nanoparticles (ABEI-AuNPs) with aptamers as nanoprobes. In the protocol, the biotinylated aptamer capture probes were first immobilized on a streptavidin coated gold nanoparticle (AuNPs) modified electrode, afterwards, the target PDGF-BB and the ABEI-AuNPs tagged aptamer signal probe were successively attached to the modified electrode by virtue of the dimer structure of PDGF-BB to fabricate a "sandwich" conjugate modified electrode, i.e. an aptasensor. ECL measurement was carried out with a double-step potential in carbonate buffer solution containing H(2)O(2). The aptasensor showed high sensitivity and selectivity toward PDGF-BB and specificity toward PDGF-BB aptamer. The detection limit was as low as 2.7 × 10(-14) M. In this work, the ABEI-AuNPs synthesized by a simple seed growth method have been successfully used as aptamer labels, which greatly amplified the ECL signal by binding numbers of ABEI molecules on the surface of AuNPs. The ABEI-AuNPs signal amplification is superior to other reported signal amplification strategies based on aptamer-related polymerase chain reaction or functionalized nanoparticles in simplicity, stability, labeling property and practical applicability. And the ABEI-AuNPs based nanoprobe is more sensitive than the luminol functionalized AuNPs based nanoprobe. Moreover, such an ultra-sensitive and low-cost assay can be accomplished with a simple and fast procedure by using a simple ECL instrumentation. The aptasensor was also applied for the detection of PDGF-BB in human serum samples, showing great application potential. Given these advantages, the ECL aptasensor is well suited for the direct, sensitive and rapid detection of protein in complex clinical samples.     

Ultrasensitive SERS Detection of Lysozyme by a Target‐Triggering Multiple Cycle Amplification Strategy Based on a Gold Substrate

An ultrasensitive surface enhanced Raman scattering (SERS) method has been designed to selectively and sensitively detect lysozyme. The gold chip as the detection substrate, the aptamer‐based target‐triggering cascade multiple cycle amplification, and gold nanoparticles (AuNPs) bio‐barcode Raman probe enhancement on the gold substrate are employed to enhance the SERS signals. The cascade amplification process consists of the nicking enzyme signaling amplification (NESA), the strand displacement amplification (SDA), and the circular‐hairpin‐assisted exponential amplification reaction (HA‐EXPAR). With the involvement of an aptamer‐based probe, two amplification reaction templates, and a Raman probe, the whole circle amplification process is triggered by the target recognition of lysozyme. The products of the upstream cycle (NESA) could act as the “DNA trigger” of the downstream cycle (SDA and circular HA‐EXPAR) to generate further signal amplification, resulting in the immobility of abundant AuNPs Raman probes on the gold substrate. “Hot spots” are produced between the Raman probe and the gold film, leading to significant SERS enhancement. This detection method exhibits excellent specificity and sensitivity towards lysozyme with a detection limit of 1.0×10^?15 M . Moreover, the practical determination of lysozyme in human serum demonstrates the feasibility of this SERS approach in the analysis of a variety of biological specimens.     

SERS Enhancement on the Basis of Temperature‐Dependent Chemisorption: Microcalorimetric Evidence

The mechanism of surface‐enhanced Raman spectroscopy (SERS) is not very clear in view of the magnitude of the contribution of electromagnetic factor as well as the chemical mechanism. This report presents the extent of adsorption at different temperatures in terms of signal enhancements in SERS employing silver nanoparticles (AgNPs) of various shapes as substrate and dye molecules, crystal violet or Rhodamine 6G, as model Raman probes. Initially, the SERS signal increases with increasing temperature until a maximum intensity is reached, before it gradually decreases with increasing temperature. This trend is independent of the shape of the Raman substrates and probes. However, the temperature at which maximum intensity is obtained may depend upon the nature of the Raman probe. The energetics involved in the chemisorption process between dye molecules and AgNPs were determined through isothermal titration calorimetry and their implications for the observed SERS signals were assessed. The maximum heat change occurred at the temperature at which the maximum signal enhancement in SERS was obtained and the enhanced interaction at optimum temperature was confirmed by absorption spectroscopy.     

Raman reporter-coated gold nanorods and their applications in multimodal optical imaging of cancer cells

We report the preparation of a kind of surface-enhanced Raman scattering (SERS) tags and explore their applications in multifunctional optical imaging of cancer cells. The proposed nanoparticles (SERS tags) are prepared by connecting dye molecules directly onto the surfaces of gold nanorods through Au–S or Au–N interactions. The dye molecules are used as Raman reporters, while gold nanorods are used as enhanced materials due to their localized surface plasmon resonance effect. Multilayered polymers are further coated onto the surfaces of the nanoparticles to reach better stability and biocompatibility. Gold nanorods with different aspect ratios and different dye molecules conjugated are compared in order to achieve the diversity of SERS tags and find out the optimized condition of SERS tags with the highest signal intensity. Our experiments show that the resulting nanoparticles, which are uptaken by cancer cells, can provide not only dark field cells images but also multiplexing SERS images.     

Determination of Lysozyme by Thiol-Terminated Aptamer-Based Surface Plasmon Resonance

A sensitive and selective surface plasmon resonance (SPR) aptasensor has been developed for the real-time determination of lysozyme. The thiol-terminated lysozyme aptamer was covalently attached to the surface of sensor through Au–S bonding. In the presence of lysozyme, the aptamer captured lysozyme on the surface and enhanced the SPR signal that was proportional to the concentration of lysozyme. Under the optimized conditions, the SPR signal was linear with lysozyme concentration from 1 to 100?µmol/L. The detection limit for lysozyme was 0.5?µmol/L. The aptasensor also provided high specificity for lysozyme and was unaffected by other proteins. This aptasensor provides rapid, simple, and sensitive determination of lysozyme detection and a promising strategy for other proteins.     

Surface-enhanced Raman Scattering Technology Based on WO3 Film for Detection of VEGF

With the advancement of nanomaterials for surface-enhanced Raman scattering(SERS) detection, a deeper understanding of the chemical mechanism(CM) and further applications has been achieved. Herein, we prepared a porous tungsten trioxide(WO₃) film by the pulse electrodeposition method, and constructed a WO₃ film SERS aptasensor. With methylene blue(MB) as the adsorption molecule, the developed WO₃ film SERS aptasensor revealed remarkable Raman activity. Through experimental data and theoretical calculations, we found that the significant SERS enhancement[enhancement factor(EF)=1.5×10⁶] was due to the CM based on charge transfer and molecular resonance. Utilizing the Raman response of MB on the WO₃ film and specific aptamers, we successfully developed the aptamer sensor by covalently attaching the MB modified aptamer to the WO₃ film. The sensor realized the specific and sensitive determination of vascular endothelial growth factor(VEGF) with the detection limit down to 8.7 pg/mL. In addition, the developed aptasensor indicated the excellent selectivity among other interferences, such as metal ions, reactive oxygen species(ROS), and proteins. This WO₃ film SERS aptasensor not only contributed to the study of the enhancement mechanism of semiconductor material, but also provided a powerful platform for the sensitive detection of VEGF, possessing a great potential in the real-time monitoring of biomarkers of glioblastoma in vitro.     

Aptamer‐Based SERS Assay of ATP and Lysozyme by Using Primer Self‐Generation

A simple bifunctional surface‐enhanced Raman scattering (SERS) assay based on primer self‐generation strand‐displacement polymerization (PS‐SDP) is developed to detect small molecules or proteins in parallel. Triphosphate (ATP) and lysozyme are used as the models of small molecules and proteins. Compared to traditional bifunctional methods, the method possesses some remarkable features as follows: 1) by virtue of the simple PS‐SDP reaction, a bifunctional aptamer assembly binding of trigger 1 and trigger 2 was used as a functional structure for the simultaneous sensing of ATP or lysozyme. 2) The concept of isothermal amplification bifunctional detection has been first introduced into SERS biosensing applications as a signal‐amplification tool. 3) The problem of high background induced by excess bio‐barcodes is circumvented by using magnetic beads (MBs) as the carrier of signal‐output products and massive of hairpin DNA binding with SERS active bio‐barcodes relied on Au nanoparticles (Au NPs), SERS signal is significantly enhanced. Overall, with multiple amplification steps and one magnetic‐separation procedure, this flexible biosensing system exhibited not only high sensitivity and specificity, with the detection limits of ATP and lysozyme of 0.05 nM and 10 fM , respectively.     

Au-coated ZnO nanorods on stainless steel fiber for self-cleaning solid phase microextraction-surface enhanced Raman spectroscopy

Solid phase microextraction-surface enhanced Raman spectroscopy (SPME–SERS), combining the pretreatment and determination functions, has been successfully used in environmental analysis. In this work, Au-coated ZnO nanorods were fabricated on stainless steel fiber as a self-cleaning SERS-active SPME fiber. The ZnO nanorods grown on stainless steel fiber were prepared via a simple hydrothermal approach. Then the obtained nanostructures were decorated with Au nanoparticles through ion-sputtering at room temperature. The obtained SERS-active SPME fiber is a reproducible sensitivity sensor. Taking p-aminothiophenol as the probe molecule, the RSD value of the SERS-active SPME fiber was 8.9%, indicating the fiber owned good uniformity. The qualitative and quantitative detection of crystal violet and malachite green was also achieved. The log–log plot of SERS intensity to crystal violet and malachite green concentration showed a good linear relationship. Meanwhile, this SERS-active SPME fiber can achieve self-cleaning owning to the excellent photocatalytic performance of ZnO nanorods. Crystal violet was still successfully detected even after five cycles, which indicated the high reproducibility of this SERS-active SPME fiber.     

Immunoassay using surface-enhanced Raman scattering based on aggregation of reporter-labeled immunogold nanoparticles

A one-step homogenous sensitive immunoassay using surface-enhanced Raman scattering (SERS) has been developed. This strategy is based on the aggregation of Raman reporter-labeled immunogold nanoparticles induced by the immunoreaction with corresponding antigens. The aggregation of gold nanoparticles results in a SERS signal increase of the Raman reporter. Therefore, human IgG could be directly determined by measuring the Raman signal of the reporter. The process of aggregation was investigated by transmission electron microscopy (TEM) and UV-Vis absorption spectroscopy. The effects of the temperature, time, and size of gold nanoparticles on the sensitivity of the assay were examined. Using human IgG as a model protein, a wide linear dynamic range (0.1-15 microg mL(-1)) was reached with low detection limit (0.1 microg mL(-1)) under optimized assay conditions. The successful test suggests that the application of the proposed method holds promising potential for simple, fast detection of proteins in the fields of molecular biology and clinical diagnostics.     

Label Free Determination of Potassium Ions Using Crystal Violet and Thrombin-Binding Aptamer

A label-free method for sensitive determination of potassium ions was developed. The most commonly studied thrombin-binding aptamer was used as the molecular probe and crystal violet was chosen as a fluorescence signal reporter. The fluorescence of crystal violet was significantly enhanced when the crystal violet solution was mixed with the single-stranded thrombin-binding aptamer. However, in the presence of potassium ions, due to the formation of potassium induced G-quadruplex structures, the fluorescence decreased. Potassium ions were determined using the change in fluorescence. The conformational transformation was investigated by circular dichroism, and interferences caused by sodium ions were studied. This label-free method offers a simple procedure that induces minimum effects on the G-quadruplex formation. Under the optimized conditions, the method exhibited a linear range from 30–420 µM for potassium ions with a detection limit of 6 µM.     

表面增强拉曼光谱研究以4,4''''-联吡啶为标记分子的免疫检测

通过表面增强拉曼光谱(SERS)研究了标记分子4,4'-联吡啶在金溶胶上的吸附行为,并将其与山羊抗小鼠IgG结合,获得SERS标记免疫金溶胶.在固相基底上组装抗体,两者组装得到固相抗体-抗原-标记抗体“三明治”结构.在单组分和双组分体系中借助抗体上标记金纳米粒子所带的SERS信号达到免疫检测的目的.     

表面增强拉曼光谱研究以4,4'-联吡啶为标记分子的免疫检测

通过表面增强拉曼光谱(SERS)研究了标记分子4,4'-联吡啶在金溶胶上的吸附行为, 并将其与山羊抗小鼠IgG结合, 获得SERS标记免疫金溶胶. 在固相基底上组装抗体, 两者组装得到固相抗体-抗原-标记抗体“三明治”结构. 在单组分和双组分体系中借助抗体上标记金纳米粒子所带的SERS信号达到免疫检测的目的.     

Enhancing the SERS properties of nanoworms by matrix formation

A highly SERS-active substrate was fabricated by trapping gold "nanoworms" on commercially available filter membranes providing significant enhancement of the Raman signal as a result of the remarkable electromagnetic couplings induced by the dense packing. The resultant substrate provides a simple and cost-effective porous SERS surface for use and quantitative analytical procedures.     

Liposome-mediated enhancement of the sensitivity in immunoassay based on surface-enhanced Raman scattering at gold nanosphere array substrate

A novel immunoassay based on surface-enhanced Raman scattering (SERS) has been developed. The method exploits the SERS-derived signal from reporter molecules (crystal violet, CV) encapsulated in antibody-modified liposome particles. The antigen is firstly captured by the primary antibody immobilized in microwell plates and then sandwiched by secondary antibody-modified liposome. The CV molecules are released from the liposome and transferred to specially designed substrate of gold nanosphere arrays with sub-10-nm gaps. The concentration of the antigen is indirectly read out by the SERS intensity of the CVs. The substrate used could substantially improve the sensitivity and reproducibility of SERS measurement. The SERS intensity responses are linearly correlated to logarithm of antigen concentration in the range of 1.0 x 10(-8) to 1.0 x 10(-4) gm L(-1) with a detection limit of 8 ng mL(-1). To our knowledge, this is the first report describing liposome-mediated enhancement of the sensitivity in immunoassay based on surface-enhanced Raman scattering. Experimental results show that the proposed method illustrates a potential prospect of applications in immunoassay.     

Aptamer-based electrochemical approach to the detection of thrombin by modification of gold nanoparticles

This paper presents a simple electrochemical approach for the detection of thrombin, using aptamer-modified electrodes. The use of gold nanoparticles results in significant signal enhancement for subsequent detection. 1,6-Hexanedithiol was used as the medium to link Au nanoparticles to a bare gold electrode. Anti-thrombin aptamers were immobilized on the gold nanoparticles’ surfaces by self-assembly. The packing density of aptamers was determined by cyclic voltammetric (CV) studies of redox cations (e.g., [Ru(NH₃)₆]³⁺) which were electrostatically bound to the DNA phosphate backbones. The results indicate that the total amount of aptamer probes immobilized on the gold nanoparticle surface is sixfold higher than that on the bare electrode, leading to increased sensitivity of the aptasensor and a detection limit of 1 pmol L⁻¹. Based on the Langmuir model, the sensor signal displayed an almost perfect linear relationship over the range of 1 pmol L⁻¹ to 30 nmol L⁻¹. Moreover, the proposed aptasensor is highly selective and stable. In summary, this biosensor is simple, highly sensitive, and selective, which is beneficial to the ever-growing interest in fabricating portable bio-analytical devices with simple electrical readout procedures.     

Aptameric SERS sensor for Hg~(2+) analysis using silver nanoparticles

Aptamer–silver nanoparticles (AgNPs) based surface-enhanced Raman scattering (SERS) sensor has been developed for Hg²⁺ detection by employing the structure-switching aptamer in the presence of spermine. This simple method shows excellent sensitivity and selectivity owing to the sensitive SERS detection technique and high specificity of aptamer for binding Hg²⁺.     

Silver nanocubes monolayers as a SERS substrate for quantitative analysis

Surface-enhanced Raman scattering (SERS) is a powerful spectroscopic tool in quantitative analysis of molecules, where the substrate plays a critical role in determining the detection performance. Herein, a silver nanocubes/polyelectrolyte/gold film sandwich structure was prepared as a reproducible, high-performance SERS substrate by the water/oil interfacial assembly method. In addition to the hot spots on the nanocubes surface, the edge-to-edge interspace of the Ag nanocubes led to marked enhancement of the SERS intensity, with a limit of detection of 10^?11 mol/L and limit of quantitation of 10^?10 mol/L for crystal violet. When rhodamine 6G and crystal violet were co-adsorbed on the Ag nanocube surfaces, the characteristic SERS peaks of the two molecules remained well resolved and separated, and the peak intensities varied with the respective concentration, which could be exploited for concurrent detection of dual molecules. Results from this work indicate that organized ensembles of Ag nanocubes can serve as effective SERS substrate can for sensitive analysis for complex molecular systems.     

金纳米粒子修饰的氨基硅胶整体柱的制备及超灵敏表面增强拉曼散射检测

采用溶胶-凝胶法结合超分子模板技术, 以四乙氧基硅烷(TEOS)和3-氨丙基三乙氧基硅烷(APTES)作为反应前体, 以十六烷基三甲基溴化铵(CTMAB)为超分子模板, 简单快速地制备了一种新型氨基硅胶整体柱, 通过氨基将金纳米粒子组装在整体柱材料孔表面并用于表面增强拉曼散射(SERS)光谱分析. 以对巯基苯胺(PATP)和结晶紫(CV)为拉曼探针, 考察了金纳米粒子修饰的氨基硅胶整体柱用作SERS活性基底的性能. 结果表明, 该整体柱基底具有良好的SERS增强效应, 可检测到的PATP和CV的最低浓度分别为10^-9和10^-11 mol/L. 与金溶胶SERS基底相比, 本文制备的整体柱基底的检测灵敏度显著提高, 并具有良好的信号均一性, 是一种具有现场痕量检测应用潜力的SERS活性基底.