Determination of traces of fluorine or sulfur by x-ray analysis

New X-ray methods have been developed for the determination of as little as 1 μg of fluorine or as little as 0.1 μg of sulfur. Fluorine as fluoride is precipitated as lanthanum fluoride in 75% ethanol-water mixture and determined by measuring the amount of lanthanum present in the precipitate. Sulfur as sulfate is precipitated as barium sulfate from a barium sulfate saturated 50% ethanol-buffer mixture, using selenate as a coprecipitant, and determined by measuring the amount of sulfur present. Sulfur as sulfide is precipitated as cadmium sulfide and determined by measuring the amount of sulfur or cadmium in the precipitate.     

咪草烟分子印迹聚合物的制备及其选择性吸附性能的研究

以丙烯酸为聚合单体,TMPTA为交联剂,AIBN为引发剂,咪草烟为模板分子,采用在低温光聚合的方法,制备了对咪草烟分子具有选择性识别能力的分子印迹聚合物．通过IR和HPLC表征,咪草烟分子印迹聚合物对咪草烟分子具有良好的识别作用．     

Enzyme-based biocatalysis for the treatment of organic pollutants and bioenergy production

Enzyme-based biocatalysis is emerging as an advanced technique to develop green processes that help to maintain the sustainability of the environment. The bioremediation of toxic organic pollutants and waste to bioenergy production using enzymes as biocatalysts is rapidly growing due to its eco-friendly and sustainable nature. Additionally, a range of microbial species that typically grow on organic wastes can be used to produce these enzymes in an efficient manner. This is seen as a potential strategy for the development of cost-effective manufacturing for a number of biotechnological applications. The present study discusses biocatalysis as a promising and sustainable method toward the bioremediation of hazardous organic pollutants as well as for bioenergy production, based on the immense potential of enzymes as biocatalysts. Emphasis has been placed on evaluating the critical elements that can enhance the production of enzymes used as biocatalysts, as well as their functional effectiveness and stability.     

Macromolecular chemistry and medicine

Macromolecular substances are used in medicine both as materials and as reagents. In the former category polymers serve as replacements for soft tissue, as cardiovascular and orthopedic implants, and as adhesives. When employed as reagents, macromolecules interact with living tissue and play an active part in bodily repair processes.     

Extraordinary atomic mobility of Au{111} at 80 Kelvin: effect of styrene adsorption

We describe how the presence of styrene, a weakly adsorbed molecule, dramatically restructures the Au{111} surface at temperatures as low as 80 K. The restructuring manifests itself both in mobility of step-edge atoms, as well as changes in the position of the herringbone reconstruction over time. These effects are explained in terms of the preferential adsorption sites of styrene allowing it to assist in atom detachment from step edges, as well as lowering of the energetic barrier for movement of the herringbone reconstruction. This work has important consequences for studies in which Au is used as a support for or as an electrical contact to molecules.     

Combining enabling techniques in organic synthesis: continuous flow processes with heterogenized catalysts

The concepts article describes enabling techniques (solid-phase assisted synthesis, new reactor design, microwave irradiation and new solvents) in organic chemistry and emphasizes the combination of several of them for creating new synthetic technology platforms. Particular focus is put on the combination of immobilized catalysts as well as biocatalysts with continuous flow processes. In this context, the PASSflow continuous flow technique fulfils both chemical as well as chemical engineering requirements. It combines reactor design with optimized, monolithic solid phases as well as reversible immobilization techniques for performing small as well as large scale synthesis with heterogenized catalysts under continuous flow conditions.     

Chemical reaction and Soret effects on MHD convective flow of second grade fluid through an absorbent medium with ramped wall temperature as well as ramped surface concentration

In the present paper, the heat generating and/or absorption as well as thermo-diffusion on the unsteady free convection MHD gyrating flow of radiation and chemical reactive second grade fluid past an unbounded perpendicular plate during absorbent medium have been discussed. Here, it is assumed that, the confining plate has the ramped wall temperature with ramped surface concentration and isothermal temperature with ramped surface concentration. The analytical solutions for the governing equations are found by utilization of Laplace transformation methodology. The velocity, temperature and concentration profiles are analyzed with quite few figures. It is determined that, velocity, temperature and concentration distribution sketches in case of ramped temperature as well as ramped surface concentration are not as much of as those of isothermal temperature as well as ramped surface concentration. In addition to the idioms of skin friction, Nusselt number as well as Sherwood number are achieved and characterized numerically with tabular format.     

Polylactic acid (PLA) synthesis and modifications: a review

This article reviews various methods of synthesizing polycondensation and ring-opening polymerization and modifying properties of polylactic acid (PLA), which may be used as biomaterials, such as a drug carrier in a drug delivery system, as a cell scaffold and suture in tissue engineering, and as packaging materials in packaging engineering field. Copolymerization of lactide with other monomers or polymers such as malic acid, polyethylene glycol (PEG), polyglycolic acid (PGA), or dextran, as well as blending polylactide with natural derivatives and other methods of modification are discussed. Surface modifications of PLA-type copolymers, such as surface coating, chemical modification, and plasma treatment are described.     

双氧水氧化环己烯催化合成己二酸研究进展

评述了近年来以环己烯为底物,双氧水为氧源,分别采用钨酸盐、钨酸、杂多酸及杂多酸盐、功能化分子筛和负载离子液体等为催化剂催化合成己二酸的研究进展.     

Controlled release of volatiles under mild reaction conditions: from nature to everyday products

Volatile organic compounds serve in nature as semiochemicals for communication between species, and are often used as flavors and fragrances in our everyday life. The quite limited longevity of olfactive perception has led to the development of pro-perfumes or pro-fragrances--ideally nonvolatile and odorless fragrance precursors which release the active volatiles by bond cleavage. Only a limited amount of reaction conditions, such as hydrolysis, temperature changes, as well as the action of light, oxygen, enzymes, or microorganisms, can be used to liberate the many different chemical functionalities. This Review describes the controlled chemical release of fragrances and discusses additional challenges such as precursor stability during product storage as well as some aspects concerning toxicity and biodegradability. As the same systems can be applied in different areas of research, the scope of this Review covers fragrance delivery as well as the controlled release of volatiles in general.     

三明治式双极膜的制备及其光催化性能

以Cr3+交联羧甲基纤维素钠(CMC)作为阳膜层,戊二醛改性壳聚糖(CS)作为阴膜层,纳米TiO2光催化剂作为双极膜的中间层,在TiO2上涂布光敏剂八羟基喹啉（Oxine）以增强其光催化解离水的性能,制备了三明治式的双极膜（mCMC/TiO2-Oxine/mCS BPM)。 该双极膜在紫外光照射下,具有高的水解离效率,优良的亲水性能,双极膜阻抗小,工作电压低,当工作电流密度达0.12 A/cm2时,电槽工作电压小于5.0 V。     

The reactivities of diarylbutadienes towards the benzoyloxy radical: the cases of 1-(1′-naphthyl)-4-phenylbuta-l,3-diene and 1,4-Di (1′-Naphthyl)buta-1,3-Diene

A study has been made of end-groups in poly(methyl methacrylate) prepared using benzoyl peroxide as initiator and either 1-(1′-naphthyl)4-phenylbuta-1,3-diene or 1,4-di(1′-naphthyl)buta-1,3-diene as additive. At 60°C, these dienes are 500–600 times as effective as methyl methacrylate in capturing benzoyloxy radicals and more than twice as effective as 1,4-diphenylbuta-1,3-diene.     

New monomers and polymers via Diels-Alder cycloaddition

The series of new bis(naphthalic anhydrides) was prepared through Diels-Alder cycloaddition. The Diels-Alder cycloaddition was used as a synthetic route to new phenylated monomers as well as to polymers. All polymers synthesized revealed to be soluble in a wide range of organic solvents such as toluene, THF, chloroform, and displayed high thermostability. Therefore, they can be processed easily and are promising candidates for advanced coating systems as well as for electrooptical applications.     

Reaction of Oximes of α-Diketones with Diphosphorous Tetraiodide for Preparation of Oxadiazoles and Nitriles

The utility of diphosphorous tetraiodide as a new, mild, condensing agent for synthesis of oxadiazole is described. These data indicate the simple dehydration of oximes to 1,2,5-oxadiazole as well as the rearrangements of oximes to normal Beckmann product 1,2,4-oxadiazole. However, mono-oxime of benzil undergoes abnormal Beckman rearrangement to benzaldehyde as major product. The described method is simple and important for the synthesis of the oxadiazoles as well as for nitriles.     

香豆素-3-羧酸分子印迹聚合物复合膜对底物的结合及渗透选择性质的研究

在光照和引发剂的作用下, 模板分子香豆素-3-羧酸、 功能单体丙烯酰胺和交联剂乙二醇二甲基丙烯酸酯(EDMA)或三甲氧基丙烷三甲基丙烯酸(TRIM)在聚偏氟乙烯(PVDF)微孔滤膜表面聚合形成分子印迹聚合物复合膜. 用高效液相色谱仪测定了分别以TRIM和EDMA为交联剂制备的分子印迹聚合物膜在不同溶剂中对混合底物的结合和渗透选择性. 结果表明, 以TRIM为交联剂的印迹膜对模板分子具有更高的结合和渗透选择性. 另外, 以乙腈或乙腈/水作为溶剂对分子印迹膜所作的实验和讨论有助于为从复杂样品中分离模板分子奠定理论和实验基础.     

Eka-elements as chemical pure possibilities

From Mendeleev’s time on, the Periodic Table has been an attempt to exhaust all the chemical possibilities of the elements and their interactions, whether these elements are known as actual or are not known yet as such. These latter elements are called “eka-elements” and there are still some of them in the current state of the Table. There is no guarantee that they will be eventually discovered, synthesized, or isolated as actual. As long as the actual existence of eka-elements is predicted, they cannot be considered as actual but only as purely possible. Given that eka-elements are chemical pure possibilities, a possibilist approach, entitled “panenmentalism,” can gain support as well as an important implication.     

Experimental and theoretical challenges in the chemistry of noncovalent intermolecular interaction and clustering

The weak, noncovalent interactions among molecules at long range and as close as van der Waals contact form a crucial contemporary frontier for chemical physics, one with many challenges for experimental as well as theoretical investigation. Certain of these challenges have been met in the last two decades, but as recognition of the complexity of phenomena governed or affected by weak interaction has grown, new challenges have arisen. We discuss a number of these challenges in the context of recent developments and progress, highlighting both disparate objectives of theory and experiment in this area as well as their crucial interplay.     

Size-exclusion chromatographic behavior of bovine serum albumin in uni-uni valent ions solutions

Summary Molecular interaction between uni-uni valent ions and bovine serum albumin was investigated by size-exclusion chromatography. Elution profiles are first presented for salt and protein solutions as samples with water as the mobile phase; then for water and protein as samples with salt solutions as the mobile phase. The results suggest the existence of a dynamic equilibrium between the salt ions and the protein ions as reactants and the ion-pair (salt-protein) complex as a product.     

Advances and challenges of MOF derived carbon-based electrocatalysts and photocatalyst for water splitting: A review

Environmental pollution and energy shortage are substantial fears to the modern world's long-term sustainability. Water splitting is an essential technique for eco - friendly and sustainable energy storage, as well as a pollution-free method to produce hydrogen. In this regards Metal–organic frameworks have emerged as the most competent multifunctional materials in recent times, due to its large surface areas, adjustable permeability, easy compositional alteration, and capability for usage as precursors with a wide range of morphological forms. Further, MOF-derived carbon-based nanomaterials also offer significant benefits in terms of tunable morphological features and hierarchical permeability, as well as ease of functionalization, making them extremely effective as catalysts or catalysts supports for a wide variety of important reactions. Recent developments in carbon-based MOFs as catalysts for overall water splitting are discussed in this review. We explore how MOFs and carbon-based MOFs might well be beneficial, as well as which methods should be explored for future development. We divided our review into two sections: photocatalytic and electrocatalytic water splitting, and we gathered published literature on carbon-based MOFs materials for their outstanding activity, offers helpful methods for catalysts design and analysis, as well as difficulties This study highlights the developments in MOF derived materials as photo and electro catalysts by explaining respective approaches for their use in overall water splitting.