膨胀石墨/聚苯胺/Fe_3O_4复合材料的制备及吸波性能

采用原位聚合方法制备了膨胀石墨/聚苯胺(EG/PANI)复合材料,将Fe_3O_4负载于EG/PANI表面,得到具有电磁吸收性能的EG/PANI/Fe_3O_4复合材料.通过扫描电子显微镜(SEM)、X射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)及矢量网络分析仪(VNA)等对复合材料的形貌、成分和吸波性能进行了研究.吸波性能分析结果表明,当掺杂浓度为0.05 mol/L,匹配厚度d=2 mm时,样品的最小反射损耗(RLmin)在8.64 GHz处达到-37 dB.随着掺杂浓度的增加,最小反射损耗峰向低频移动,对应的匹配厚度逐渐变厚.材料的介电弛豫极化、涡流损耗及λ/4模型的干涉相消现象出现的双峰,使EG/PANI/Fe_3O_4复合材料在电磁波吸收领域有一定的应用前景.     

ZnO/Ag微米球的合成与光催化性能

用微波辅助多元醇法对预先制备的ZnO微米球进行修饰,合成了载银氧化锌微米球（ZnO/Ag）. 利用X射线衍射仪、场发射扫描电子显微镜、透射电子显微镜、X射线光电子能谱仪、紫外-可见双光束分光光度计和光致发光光谱仪等对样品的结构、形貌和光学性能进行了表征. 在紫外光照射下,通过亚甲基蓝的降解反应研究了样品的光催化活性. 结果表明,所制备的ZnO/Ag微米球是由面心立方的Ag纳米颗粒附着在纤锌矿结构的ZnO球表面形成;与ZnO相比,ZnO/Ag的紫外-可见光吸收光谱发生明显红移,在紫外和可见光范围均有较强的吸收;随着Ag含量的增加,ZnO/Ag荧光光谱强度先减弱后增强;与ZnO相比,ZnO/Ag的光催化活性明显提高,AgNO₃ 浓度为0.05 mol/L时制得的ZnO/Ag光催化活性最高.     

中空结构聚苯胺/Fe_3O_4/炭黑复合材料的制备及吸波性能

采用界面聚合和Pickering乳液聚合相结合的方法制备了具有微米尺寸的中空聚苯胺/Fe_3O_4/炭黑微球复合材料,研究了其形貌、电磁性能和吸波性能.结果表明,中空聚苯胺/Fe_3O_4/炭黑微球的平均粒径约为2.0μm;在2~4 GHz范围内的磁损耗主要是自然共振和交换共振,而在4~18 GHz范围内的磁损耗主要是涡流损耗;在2~18 GHz范围内,随着涂层厚度增加,反射损耗峰向低频方向移动,当涂层厚度增大到5.0mm时,反射损耗曲线出现2个反射损耗峰,分别位于C波段(4~8 GHz)和Ku波段(12~18 GHz),说明中空聚苯胺/Fe_3O_4/炭黑微球复合材料可作为特定频段的吸波材料.     

Polyaniline/Au composite hollow spheres: synthesis, characterization, and application to the detection of dopamine

Polyaniline (PANI)/Au composite hollow spheres were successfully synthesized using polystyrene/sulfonated polystyrene core/shell gel particle templates. The PANI shell thickness and the number of Au nanoparticles decorating the PANI could be controlled effectively by adjusting the experimental conditions. The morphology, composition, and optical properties of the resulting products were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and ultraviolet-visible absorption spectra. It was found that the electrical conductivity of the PANI/Au composite hollow spheres was more than 3 times higher than that of the pure PANI hollow spheres. Furthermore, PANI/Au composites were immobilized on the surface of a glassy carbon electrode (GCE) and applied to construct a sensor. The obtained PANI/Au-modified GCEs showed one pair of redox peaks and high catalytic activity for the oxidation of dopamine. The possible formation mechanism of the PANI/Au composite hollow spheres was also discussed.     

Synthesis and Characterization of PANI/ZnO Nanocomposites

This paper presents our results on the successful fabrication of HCl‐doped polyaniline (PANI)/ZnO nanocomposites via an electrochemical synthesis route. Different weight percents of ZnO nanoparticles were uniformly dispersed in the PANI matrix. The interaction between the dispersed ZnO nanoparticle and PANI was studied using X‐ray diffraction, ultraviolet–visible absorption spectroscopy, photoluminescence (PL) spectroscopy, X‐ray photoelectron spectroscopy, atomic force microscopy, thermogravimetry, and transmission electron microscopy. It is shown that the doping state of the PANI/ZnO nanocomposite is highly improved as compared to that of PANI. The dispersed PANI/ZnO nanocomposites exhibit enhanced PL behavior and thermal stability.     

ZnO纳米颗粒锚定的亚微米碳纤维的制备及其吸波性能

使用静电纺丝技术结合水热法制备了表面锚定ZnO纳米颗粒的亚微米碳纤维（ZnO/SDCFs）复合物,并详细研究了反应溶液的pH值对复合物的结构、组成、电磁特性和吸波性能的影响。结果显示,随着pH值的升高,ZnO的含量增加,介电常数、介电损耗以及电磁衰减能力均下降,但阻抗匹配程度提高。相比于纯碳纤维,所有ZnO/SDCFs复合物的吸波性能均得到不同程度的加强。其中,pH值等于8时所制备的ZnO/SDCFs-8复合物拥有最好的吸波性能,主要归因于电磁衰减能力和阻抗匹配间的更好平衡。当ZnO/SDCFs-8的填充量仅为2.5%（质量分数）、厚度为1.7 mm时,相应吸波涂层的最小反射损耗达到-44.1 dB,低于-10 dB的有效吸收带宽为6.1 GHz,频率范围为11.9~18 GHz;当厚度为3.0 mm时,有效吸收带宽可提高到11.8 GHz（6.2~18 GHz）。     

Single‐Crystalline ZnO Nanowire Bundles: Synthesis,Mechanism and Their Application in Dielectric Composites

Single‐crystalline ZnO nanowire bundles have been synthesized in large‐scale by an improved microemulsion method in the presence of excessive hydrate hydrazine and dodecyl benzene sulfonic acid sodium salt (DBS) in xylene. The product is characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and high‐resolution transmission electron microscopy (HRTEM). The result shows that the bundle is composed by many oriented single‐crystalline ZnO nanowires with a length of about 1 μm and a diameter of about 20–30 nm. The influence of DBS, hydrazine and the reaction time on the morphology of final product and the formation mechanism of such nanostructures were discussed; the application in the dielectric composites is also studied.     

单分散P(St-BA-AN)/PANI核壳结构复合微球的制备与电性能

以苯乙烯(St)、丙烯酸丁酯(BA)和丙烯腈(AN)为单体, 采用乳液聚合的方法制备出单分散苯乙烯-丙烯酸丁酯-丙烯腈三元共聚物[P(St-BA-AN)]种子微球, 再在该种子微球表面包覆聚苯胺(PANI), 制得P(St-BA-AN)/PANI核壳结构复合微球. 采用扫描电镜(SEM)、透射电镜(TEM)、傅里叶变换红外透射光谱(FTIR)和漫反射光谱等测试手段对所制备的种子微球和复合微球的形态、结构和形成机理进行了研究, 并用四探针法测定了核壳结构复合物的导电性. 研究结果表明, 通过改变种子乳液共聚物的组成和加入苯胺的量及氧化剂的量等条件可调控复合微球的电导率. 与P(St-BA)/PANI核壳结构复合微球相比, 在核组成中引入了氰基的P(St-BA-AN)/PANI核壳结构复合微球的电导率明显提高, 当加入苯胺的量为P(St-BA-AN)种子微球与苯胺单体总质量分数的40%时, 其电导率可达到0.71 S/cm. 红外光谱结果证实了P(St-BA-AN)种子微球中的氰基和壳层中聚苯胺的胺基之间存在某种相互作用, 导致核壳结构复合物电导率的提高.     

Thermomechanical behaviors and dielectric properties of polyaniline‐doped para‐toluene sulfonic acid/epoxy resin composites

Composites based on conductive organic/inorganic fillers dispersed in insulating matrix have been widely investigated because of their widespread applications such as electromagnetic shielding, electrostatic discharge, and sensors. In this context, novel composite materials based on epoxy resin matrix charged with polyaniline (PANI)‐doped para‐toluene sulfonic acid were elaborated. Fourier transform infrared spectroscopy, X‐ray diffraction and scanning electron microscopy were used to check the structure and the morphology of the samples. Viscoelastic behavior and thermal stability of the composites were explored by dynamic mechanical thermal analysis and thermogravimetric analysis. It was shown that the PANI particles exhibited a partial crystalline structure and were homogeneously dispersed in epoxy matrix. Consequently, this structure affected the thermal stability and viscoelastic properties of the composites. Furthermore, the dielectric and electrical properties were investigated up to 1 MHz. Measurements of dielectric properties revealed that with loading fillers in matrix, the dielectric parameters increased to high values at low frequency then decreased at values around 40 and 32 of real and imaginary parts, respectively, at 1 MHz with 15% of PANI content. Copyright © 2011 John Wiley & Sons, Ltd.     

Ku-band EMI shielding effectiveness and dielectric properties of Polyaniline-Y2O3 composites

Electromagnetic interference (EMI) shielding has become a phenomenon of great concern and there is growing demand towards the synthesis of materials with better EMI shielding effectiveness (EMI SE). This work highlights the preparation of Polyaniline-Yttrium Oxide (PANI-Y₂O₃) composites for EMI shielding applications in the frequency range from 12.4 to 18 GHz (Ku-band). The structure and morphology of the composites were investigated by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). EMI SE, microwave absorption and reflection, dielectric properties of the composites are discussed in detail. All the computations were based on microwave scattering parameters measured by transmission line waveguide technique. The observed results show absorption dominant EMI shielding in these composites with EMI SE of ?19 to ?20 dB, which mainly depends on the dielectric loss of the composites. Through the results of our observations, we propose these composites to be potential materials for microwave absorption and EMI shielding applications.     

尺寸可控的聚苯胺复合微球的电纺制备与表征

以十二烷基苯磺酸(DBSA)掺杂的导电聚苯胺与聚乙二醇(PEG)及Fe3O4的混合氯仿溶液,采用静电纺丝(spinning technology)方法制备含Fe3O4纳米颗粒的导电聚苯胺(PANI)/PEG/Fe3O4复合微球.SEM结果表明,电纺所得的PANI/PEG/Fe3O4复合微球结构依赖于PEG聚合物浓度、静...     

聚苯胺/石墨烯涂覆型阴离子交换固定相的制备及表征

该文以聚苯胺/石墨烯复合材料为涂覆材料,制备了一种涂覆型阴离子交换固定相。首先以苯胺和石墨烯为原料制备聚苯胺/石墨烯复合材料,并通过物理吸附涂覆在聚苯乙烯-二乙烯苯微球表面;然后以聚苯胺中的氮原子为反应位点,通过季铵化制备一系列具有不同交换容量的涂覆型阴离子交换固定相。通过扫描电镜(SEM)、傅里叶红外光谱(FT-IR)和元素分析(EA)对该涂覆型阴离子交换固定相进行表征,结果表明聚苯胺/石墨烯成功地涂覆在微球表面且发生了季铵化。通过分离常规阴离子和有机酸,对自制阴离子交换色谱柱的色谱性能进行评价。结果显示,8次季铵化的聚苯胺/石墨烯涂覆聚苯乙烯-二乙烯苯阴离子交换色谱柱对常规阴离子和有机酸呈现良好的分离效果。     

静电纺丝制备Tb-PEG+Eu-PEG/PANI/PAN荧光导电相变三功能复合纤维

以聚丙烯腈(PAN)为载体基质、 以铕-聚乙二醇(Eu-PEG)和铽-聚乙二醇(Tb-PEG)为相变荧光材料, 加入掺杂的导电聚苯胺(PANI), 采用静电纺丝技术制得Tb-PEG+Eu-PEG/PANI/PAN复合纤维. 采用扫描电子显微镜(SEM)、 荧光光谱(FL) 仪、 差示扫描量热(DSC)仪及宽频介电松驰谱(BDS)仪等方法对相变荧光导电复合纤维的性能进行分析. 研究结果表明, 复合纤维具备良好的荧光、 相变及导电性能. 在294 nm紫外光激发下, 通过调节Tb-PEG和Eu-PEG的质量比可调节复合纤维的发光强度和颜色, 同时复合纤维的相变温度在5467 ℃之间. 复合纤维的电导率达到10^-6 S/cm, 随着PANI含量的增加, 电导率和介电常数增加. 通过调节Tb-PEG, Eu-PEG和PANI的比例及PEG的分子量, 可以实现复合纤维荧光、 导电及相变性能的可控调整.     

低压近场静电纺丝ZnO/PVDF复合微米纤维阵列的制备及压力传感性

利用低压近场静电纺丝技术制备了ZnO/PVDF(聚二偏氟乙烯)微米纤维平行阵列, 通过光学显微镜、扫描电子显微镜(SEM)和X射线能量色散光谱(EDS)对ZnO/PVDF微米纤维进行了表征. 该复合纤维的平均直径约为40 μm. EDS分析测试证明ZnO纳米颗粒已经掺杂进入了平行微米纤维中. 压电性能和电学性能测试结果表明, ZnO/PVDF微米纤维阵列的压电性能增强. 研究结果表明, 近场电纺丝ZnO/PVDF复合微米纤维阵列在压电型压力传感器和纳米发电机领域具有潜在的应用价值.     

三维球状ZnO纳米簇的微波辅助合成与微波增强光催化降解染料

采用微波辅助合成方法制备了具有高光催化活性的三维球状ZnO纳米簇, 通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)以及氮气吸附-脱附测定等手段对材料进行了表征. 结果表明, 纳米ZnO具有纤锌矿晶型结构, 在微波辐射作用下形成了直径约为3~4 μm的球状纳米簇. 该纳米簇内外结构不同, 表面由尺寸均一的ZnO纳米棒紧密整齐排列, 内核由许多ZnO粒子组成的层状骨架构成. 该纳米簇属介孔材料, 其比表面积在微波作用下显著增大. 以染料罗丹明B为模型分子考察了纳米ZnO在微波辐射下的光催化活性, 结果显示, 微波辅助合成球状ZnO纳米簇在微波增强光催化条件下, 催化活性明显高于未经微波处理的ZnO样品和市售P25, 其对多种染料均有显著的降解效果, 40 min内对染料(除甲基橙外)的降解率可达90%以上.     

Development of an optical ammonia sensor based on polyaniline/epoxy resin (SU-8) composite

Polyaniline (PANI)/glycidyl ether of bisphenol A (SU-8) composite film is elaborated in order to detect ammonia gas. These composite films are characterized by ultraviolet-visible (UV-vis) spectroscopy, Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The sensitivity to ammonia is measured by optical absorption changes. The ammonia sensing properties of PANI/SU-8 composite films are studied, and then are compared to pure PANI films elaborated by chemical way. Experimental results show that the PANI/SU-8 optical sensor has simultaneously a rapid response to ammonia gas and regenerates easily, that is advantageous compared to pure PANI films.     

多孔羰基铁/CoFe2O4/聚苯胺复合材料的制备及吸波机理

通过金属点蚀技术制备了表面多孔形貌的羰基铁粉（PCIP）,并采用共沉淀及原位聚合方法,将CoFe₂O₄与聚苯胺（PANI）负载于多孔羰基铁表面,得到具有电磁吸收性能的PCIP/CoFe₂O₄/PANI复合材料.通过扫描电子显微镜（SEM）、X射线衍射仪（XRD）、傅里叶变换红外光谱仪（FTIR）、热重分析仪（TGA）及矢量网络分析仪（VNA）等对复合材料的形貌、成分和吸波性能进行了研究.结果表明,CoFe₂O₄/PANI团聚于PCIP表面,显著提升了复合材料电损耗能力,促进了低频电磁波的1/4波长干涉相消.当苯胺添加量为0.5 mL,复合材料在频率为5.7 GHz时,反射损耗达到-22.9 dB,低频吸波性能得到大幅提升.利用1/4波长干涉相消理论及电磁波界面反射模型对复合材料低频吸波性能提升的内在原因进行了分析.     

A Template‐Free Method toward Urchin‐Like Polyaniline Microspheres

Urchin‐like PANI microspheres with an average diameter of 5–10 µm have been successfully prepared. Their surfaces consist of highly oriented nanofibers of ≈30 nm diameter and 1 µm length. The solvent composition plays an important role in the formation process of urchin‐like PANI microspheres. The structure of the products has been characterized by FT‐IR, UV‐vis, and XRD. To investigate the self‐assembly of urchin‐like PANI microspheres, the effect of polymerization time on the morphology of the products has been studied. The morphological evolution process indicates that the urchin‐like microspheres originate from the self‐assembly of nanoplates, which then grow into urchin‐like microstructures with nanofibers on the surface.

     

Strong Structural and Electronic Binding of Bovine Serum Albumin to ZnO via Specific Amino Acid Residues and Zinc Atoms

ZnO biointerfaces with serum albumin have attracted noticeable attention due to the increasing interest in developing ZnO-based materials for biomedical applications. ZnO surface morphology and chemistry are expected to play a critical role on the structural, optical, and electronic properties of albumin-ZnO complexes. Yet there are still large gaps in the understanding of these biological interfaces. Herein we comprehensively elucidate the interactions at such interfaces by using atomic force microscopy and nanoshaving experiments to determine roughness, thickness, and adhesion properties of BSA layers adsorbed on the most typical polar and non-polar ZnO single-crystal facets. These experiments are corroborated by force field (FF) and density-functional tight-binding (DFTB) calculations on ZnO-BSA interfaces. We show that BSA adsorbs on all the studied ZnO surfaces while interactions of BSA with ZnO are found to be considerably affected by the atomic surface structure of ZnO. BSA layers on the surface have the highest roughness and thickness, hinting at a specific upright BSA arrangement. BSA layers on surface have the strongest binding, which is well correlated with DFTB simulations showing atomic rearrangement and bonding between specific amino acids (AAs) and ZnO. Besides the structural properties, the ZnO interaction with these AAs also controls the charge transfer and HOMO-LUMO energy positions in the BSA-ZnO complexes. This ZnO facet-specific protein binding and related structural and electronic effects can be useful for improving the design and functionality of ZnO-based materials and devices.     

Microwave Absorption and Infrared Stealth Characteristics of Bamboo Charcoal/Silver Composites Prepared by Chemical Reduction Method

Bamboo charcoal coated with silver (BC/Ag) was prepared by activation and chemical reduction processes at different AgNO₃ contents (10‐30 wt.%). The spectroscopic characterizations of the formation processes of BC/Ag composites were studied using X‐ray diffraction, scanning electron microscopy and transmission electron microscopy. These composites were introduced in epoxy resin to be a microwave absorber and mixed polyethylene to be an infrared stealth plate. Microwave absorbing properties were investigated by measuring complex permittivity, complex permeability and reflection loss in the 2‐18 and 18‐40 GHz microwave frequency range using the free space method. The thermal extinction measurements in the 3‐5 and 8‐12 μm were done to evaluate the shielding affectivity of infrared. The results showed that a significant thermal extinction and a wider absorption frequency range could be obtained by adding silver to bamboo charcoal.