双金属金属有机骨架材料的制备及性能研究进展

金属有机骨架材料(MOFs)具有拓扑结构的多样性和丰富的比表面积,使其在催化和吸附领域具有潜在的应用价值。 双金属MOFs具有两种金属中心,较之单金属MOFs具有更加多元的催化活性位点和吸附位点,因此吸附选择性、选择催化性以及结构稳定性等均得到了提升。 本文就如何制备性能优异的双金属MOFs材料,以及这种材料的结构特点、性能提升和应用前景展开了概述。     

金属有机框架材料吸附性能应用的研究

金属有机框架材料(MOFs)是一种多孔聚合物材料,其相关研究近年来取得迅速发展。MOFs是以金属离子为中心,桥连的有机配体作为支撑经延伸形成的一类具有周期性网络结构的晶态多孔材料[1]。由于其较强的功能性、较高的比表面积、超高的孔隙率以及可调控的孔道结构[2],MOFs在储气、分离、催化、载药和光学等领域受到了极大的重视,并具有广泛的应用前景。本文从MOFs材料的结构设计出发,介绍近几年MOFs材料在能源气体(H2、CH4)的储存,H2S、CO2、有机气体分子的捕集以及医学领域(对于一些药物的吸附装载)的研究进展,并对MOFs材料在应用上存在的问题进行了阐述,对其未来的发展趋势作出展望。     

用于电解水制氢的过渡金属有机骨架基催化剂

金属有机骨架(MOFs)材料因具有无机和有机的杂合性质、高度有序的多孔性、结构可修饰性、比表面积大和孔隙率高等特点,在催化领域具有广阔的应用前景。本文从氢能的开发利用角度出发,在纯MOFs、MOFs复合及衍生材料三个方面对近十年来过渡金属MOFs基催化剂在电解水制氢方面的重要研究进展进行了综述,着重针对材料的合成进行了探讨,以及在基础研究和产业应用的角度指出当前过渡金属MOFs基制氢催化剂面临的挑战和机遇,对其应用前景进行展望。     

功能化金属有机骨架材料去除饮用水污染物的研究进展

金属有机骨架(MOFs)材料是一类以过渡金属为中心、含杂原子的有机物为配体、通过配位作用形成的周期性网络多孔晶体材料。与其他的多孔材料相比,MOFs配体种类繁多,比表面积极大,孔径大小可调控且具有特殊(饱和或不饱和)的金属位点,在气体存储、催化、吸附与分离等领域有广阔的应用前景。近年来,功能化MOFs对污染物的富集和去除成为学者关注的热点。这是由于通过对MOFs进行功能化修饰,能够改变MOFs的孔径大小、表面带电性质等物化性质,从而实现对目标物更高效的吸附。该文综述了近年来功能化MOFs对饮用水污染物吸附的研究进展,包括饮用水污染物的类型及危害、功能化MOFs的制备方法以及去除饮用水污染物的应用,并对今后的发展前景进行了展望。     

羧基配体金属有机骨架材料作为催化剂的研究进展

<正>金属有机骨架材料(MOFs)是由无机金属中心与多齿有机配体通过配位键形成的立体网络结构多孔晶体材料[1].MOFs具有多孔性、大比表面积、结构规整、有机配体的可修饰性、金属离子的可选择性等特点,在气体吸附、气体分离、磁性材料、光学材料和催化剂等领域得到广泛的应用[2-6].尤其是在催化方面,MOFs结合了金属有机配合物和分子筛的优点,可以直接用作催化剂,也可作为催化剂载体使用.     

金属-有机框架材料在液相催化化学制氢中的研究进展

金属-有机框架(MOFs)材料是由金属簇节点或金属离子与有机配体连接而成的典型的无机-有机杂合物, 作为一类新兴的无机多孔晶态材料, MOFs因具有高度有序的多孔性、 结构可裁剪性、 高比表面积及灵活多变的骨架类型等优点而在工业合成、 能源开发、 环境治理和生物制药等领域展现出广阔的应用前景. 本文从氢能源的开发利用出发, 总结了近年来MOFs基纳米复合材料在催化化学制氢方面的研究进展. 讨论了常见的含氢量高的化学储氢材料, 包括氨硼烷、 甲酸和水合肼等; 催化材料主要有单一MOFs、 MOF基贵金属和非贵金属复合材料及MOF基衍生材料等. 最后, 对MOF基复合材料在液相催化化学储氢中的应用前景进行了展望.     

金属有机框架材料在环境化学中的研究进展

金属有机框架(MOFs)是一类由有机桥连配体与无机金属中心通过自组装形成的新型多孔材料.相比传统的多孔材料,MOFs具有比表面积高、孔径均一、结构可调节等优点,在基础理论研究和实际应用方面都表现出巨大的潜力.近年来,环境问题日益突出,开发新型材料解决环境问题迫在眉睫,MOFs材料在环境化学中的应用受到了广泛关注.本文主要介绍MOFs材料在催化、气体存储、气体吸附与分离、气敏传感和水体净化等多个领域的理论研究与应用现状,并进一步讨论了MOFs材料在该领域面临的挑战和发展趋势.     

金属有机骨架材料在氨低温催化还原氮氧化物反应中的应用

氮氧化物(NO _x )是造成大气污染的主要污染物之一,工业窑炉和燃煤电厂等固定源以及以机动车为代表的移动源所排放的氮氧化物对生态环境造成了一系列的危害。为此控制并降低NO _x 排放是当前十分艰巨的任务。金属有机骨架材料(MOFs)这种新型的多孔聚合材料由于其多活性位点、高比表面积、结构可修饰、易于功能化而表现出突出的多相催化性能近年来在低温工业脱硝领域逐渐受到关注。本文总结了MOFs材料在氨低温催化还原氮氧化物反应中的应用进展,重点阐述了单金属和双金属的MOFs材料的应用以及MOFs衍生物催化剂的研究。最后对MOFs在低温脱硝领域中目前存在的问题并对其发展方向和前景进行了展望。     

金属-有机骨架材料在催化氧化反应中的应用

本文综述了近几年金属-有机骨架(metal-organic frameworks,MOFs)材料在催化氧化反应中的研究进展。由于MOFs材料在结构上常具有特殊活性位点、孔隙率高、比表面积大且孔尺寸与性质可调等特点,在催化上有极大的应用潜力。本文主要介绍了MOFs材料自身作为催化剂和其作为载体负载具有催化活性组分的催化氧化反应。其中,着重介绍了具有配位不饱和金属位点的MOFs和MOFs做为载体负载金属纳米颗粒、多金属氧酸盐和金属卟啉用于催化的氧化反应,包括一些有机分子如烷烃、苄基化合物、烯烃、醇、酚、硫化物和无机小分子CO、水的催化氧化,也介绍了相关仿生催化和有机染料的催化氧化。MOFs和MOFs载体的催化性能主要从稳定性、非均相性、尺寸选择性及活性位的析出四个方面进行了评价。同时,对MOFs材料在催化应用中的发展趋势作了展望。     

MOFs在催化有机分子转化中的应用

金属有机框架化合物（MOF）,又称多孔性配位聚合物,是有机配体与金属离子自组装而成的一类新型有机-无机杂化多孔材料,是纳米材料的重要组成部分。与其他多孔材料相比,MOFs具有较大的比表面积、高的孔隙率以及结构和性质可调等特性,使其在非均相催化领域具有良好的应用前景。本文首先对MOFs催化的背景进行简述,然后对近年来报道的MOFs用于有机分子催化转化反应的进展进行了综述及展望,以期为MOFs催化有机反应的设计和开发提供参考。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.