含不同柔性链的(甲基)丙烯酸酯类液晶高分子的合成及其液晶行为研究

通过改变侧链中柔性间隔基的长度,合成了一系列含有两个手性中心的侧链液晶（甲基）丙烯酸酯类聚合物.红外、核磁和GPC表征各中间体、单体及聚合物的结构和分子量.通过DSC和热台偏光显微镜系统地研究了单体和聚合物的液晶态织构.结果表明,含有六个碳的柔性间隔基的丙烯酸酯类聚合物表现为近晶SA和手性近晶SC^＊液晶相.     

侧链含有蓝相液晶基元的聚硅氧烷液晶的合成及表征

采用蓝相小板块液晶单体反式-4-乙烯基-反式-4′-丙基双环己烷（3HHV）和反式-4-丙烯基-反式-4′-丙基双环己烷（4HHV）同时接枝到聚甲基含氢硅氧烷上,制备了聚硅氧烷侧链液晶聚合物。采用红外光谱和核磁共振氢谱对液晶单体及相应的聚合物进行结构表征,采用热台偏光显微镜,X-射线衍射和热分析对单体和聚合物的液晶行为及热性能进行研究。结果表明：液晶单体3HHV显示蓝相镶嵌织构,液晶单体4HHV显示胆甾相油纹状织构,它们的介晶区间温度分别为30.6°C和49.7°C,且均在低于室温就显示出液晶性。相应的液晶聚合物显示向列相纹影织构,介晶区间温度为192.6°C,在低于室温时也显示出液晶性,且热分解温度达到310°C以上,比其他环芳烃类介晶基元接枝聚硅氧烷主链的液晶聚合物具有更优越的热稳定性。     

新型手性液晶单体、交联剂及其弹性体的合成与表征

报道了一种含薄荷基的手性单体(MLC)、液晶交联剂(CA)及胆甾弹性体(LCE),采用FT-IR与1 H-NMR等手段表征了它们的化学结构,液晶的热性能与光学织构采用DSC、TGA、POM等仪器进行测试研究。结果表明:单体MLC呈现手性近晶C相的破碎扇形织构及胆甾相的油丝织构和焦锥织构,交联剂CA在升降温过程中均呈现典型的近晶A相的扇形织构和向列相的线状织构,而弹性体LCE呈现胆甾相的Grandjean彩色织构,为互变热致液晶聚合物,此外,轻度的化学交联并没有显著影响弹性体的液晶性质,其对应的玻璃化温度和清亮点分别是10.5℃和176.2℃。TGA表明液晶弹性体具有良好的热稳定性,热分解温度为339℃。     

侧基横挂偶极单元的液晶聚苯撑乙炔的合成与表征

为了制备电致偏振光发光材料, 以对苯二乙炔和2,5-二溴苯衍生物为单体,通过Sonogashira偶联反应, 采用不同Pd催化剂, 合成了一种侧基横挂偶极基团的液晶聚苯撑乙炔. 单体的化学结构通过IR, NMR和元素分析等方法得到确证. 聚合物外观为黄色粉状固体, 室温下溶于CHCl3和THF等有机溶剂. 将聚合物加热到各自的玻璃化转变温度以上都能形成液晶态并显示双向液晶性. 考察了不同催化剂对合成的聚合物的分子量、聚合物链中单体单元的结构排列以及液晶性质的影响. 结果表明, 两种不同的Pd催化剂对合成的聚合物的分子量以及液晶态温度范围影响不大, 但对聚合物的立构规整性以及聚合物的液晶态织构有较大的影响. Pd(PPh3)4作催化剂合成的聚合物中单体单元的结构排列较单一, 可以观察到清晰的液晶态织构. 以PdCl2(PPh3)2为催化剂合成的聚合物链中单体单元的结构排列相对复杂, 液晶态织构不明显. 变温X 射线衍射研究证实聚合物均为向列相液晶.     

具有液晶性新型聚芳醚酮的合成与表征

通过联苯二酚(介晶基元)、取代对苯二酚(破坏结晶基元)与4,4'-二氟二苯酮的亲核取代反应合成了一系列具有液晶性的新型聚芳醚酮,采用DSC、PLM和WAXD等方法对聚合物的研究表明:联苯含量为70%时聚合物表现为向列相,联苯含量为50%时聚合物出现近晶相,在外力场作用下,向列相液晶容易形成明暗交替的条带织构.     

非线性光学活性的侧链型聚丙二酸酯液晶的合成和性质

通过熔融缩聚法合成了含非线性光学活性硝基偶氮苯液晶基元的聚丙二酸酯侧链液晶聚合物 ,采用FTIR、NMR对其结构进行了表征 ,DSC确定其液晶转变温度 ,并用变温WAXD及偏光显微镜 (POM )研究其液晶性质 ,该聚合物为近晶型液晶聚合物 ,POM观察到典型焦锥织构 ,近晶相WAXD有对应层间距为2 74nm和 1 35nm的两个衍射峰 .聚合物旋涂膜经电晕极化 ,紫外光谱测试求得其取向序参数 =0 33 .     

光致变色液晶高分子的研究(Ⅰ)─含胆甾介晶基无侧链聚硅氧烷及其单体的液晶行为

用POM、DSC和WAXD研究了十一烯酸胆甾酯及含胆甾介晶基元侧链聚硅氧烷的液晶行为。单体呈现明甾相的油条及螺旋织构,单致变近晶相的扇形织构和固-固相变。均聚物显示S_A相的扇形织构。     

3,5-二氨基苯甲酸-4′-联苯酯及含液晶侧链的聚酰亚胺的合成与表征

合成了含液晶基元侧基的二氨基化合物——— 3,5 二氨基苯甲酸 4′ 联苯酯 ,并以 3,3′ 4,4′ 二苯醚四羧酸二酐 (ODPA)、二氨基二苯醚 (ODA)为共聚单体 ,制备了具有液晶侧链原位复合自增强功能的新型聚酰亚胺 (PI)薄膜材料 .这种含液晶基元侧链的PI能溶解在极性非质子有机溶剂中 ,显示出良好的可加工性能 .由于液晶基元侧链的原位复合自增强作用 ,该类膜材料显示出良好的力学性能和热稳定性能在热台偏光显微镜下观察 ,该类聚合物在较高的温度区域内显示液晶行为 ,并呈现向列相织构     

聚丙烯酸酯型高分子侧链液晶的合成及其对聚乙烯成核结晶行为的影响

基于聚烯烃用成核剂的结构特征设计合成了两种极性基团和非极性基团交替排列的乙烯基单体,并利用自由基引发聚合,制备出相应的侧链型液晶聚合物.采用元素分析、红外光谱和核磁共振氢谱对所合成单体和聚合物的结构进行了确认.并采用热失重(TGA)和差示扫描量热仪(DSC)研究了聚合物的热稳定性和相转变温度.结果表明,所合成聚合物的起始热分解温度均在337℃以上,具有优异的热稳定性;液晶相变温度区间可达186 K,具有较宽的液晶态温度范围.热台偏光显微镜(HS-POM)研究结果表明,聚合物均呈现出纹影织构,证明所合成的聚合物均为热致向列型侧链液晶高分子.采用DSC和HS-POM研究了所合成的侧链液晶聚合物对高密度聚乙烯(HDPE)异相成核结晶行为的影响.结果表明,侧链型液晶聚合物在提高HDPE结晶温度、结晶度以及降低HDPE晶粒的尺寸及分布方面均有优异的效果,是一类HDPE有效的成核剂.     

光致变色液晶高分子的研究（Ⅰ）—含胆甾介晶基元侧链聚硅氧烷…

用ＰＯＭ、ＤＳＣ和ＷＡＸＤ研究了十一烯酸胆甾酯及含胆甾介晶基元侧链聚硅氧烷的液晶行为。单体呈现胆甾相的油条及螺旋织构，单致变近晶相的扇形织构和固－固相变。均聚物显示ＳＡ相的扇形织构。     

Studies on the Side Chain Liquid Crystalline Copolymer Containing Nonlinear Optical Groups *

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｏｒｇａｎｉｃｎｏｎｌｉｎｅａｒｏｐｔｉｃａｌｍａｔｅｒｉａｌｓａｒｅｃｕｒｒｅｎｔｌｙｔｈｅｓｕｂｊｅｃｔｏｆｍａｎｙｒｅｓｅａｒｃｈｐｒｏ－ｇｒａｍｓ,ｏｗｉｎｇｔｏｔｈｅｉｒｐｏｔｅｎｔｉａｌａｐｐｌｉｃａｔｉｏｎ...     

Director fields of disclinations in the nematic mesophase decorated by focal‐conic texture for side‐chain liquid crystalline polymers

A new decoration method termed as focal‐conic texture decoration has been established to map the director field of disclinations of nematic mesophases for a side‐chain liquid crystalline polymer (SCLCP) based on its transition from nematic to smectic phase with focal‐conic texture observed under a polarizing optical microscope. FT‐IR microscopy was used to ascertain the relationship between the mesogenic orientation direction and the orientation direction of focal‐conic texture, which exhibits consequently the director field of a disclination.     

含联苯结构侧链液晶聚合物的合成及相行为的研究

液晶聚合物从结构上可分为3种:侧链型、主链型和主侧链型。侧链型液晶聚合物主要是聚丙烯酸酯类、聚硅氧烷类以及磷腈聚合物类。Gray等对聚丙烯酸酯类含不同取代基的联苯结构液晶聚合物进行了研究,结果表明无间隔基且取代基为氰基和饱和脂肪基时,该聚合物呈现近晶型液晶行为。为了增加介晶单元的长径比及刚性,本文在聚甲基丙烯酸酯侧链     

Direct decoration of disclinations by solidification-induced band texture for a nematic side chain liquid crystalline polymer

For a nematic polymethacrylate side chain liquid crystalline polymer, g 154 N 298 I (°C), the solidification-induced band texture has been observed aligned along the disclination under a polarizing optical microscope, when the specimen was quenched from 280°C to room temperature. The decoration technique of solidification-induced band texture, which is usually reported for main chain liquid crystalline polymers, was then introduced to reveal the director field pattern along a disclination for this side chain liquid crystalline polymer. It was found by infra-red dichroism measurements that the director orientation is parallel with the direction of the band. On this basis, disclinations with strength s=±1/2 and s=±1 were mapped according to the corresponding pattern of solidification-induced band texture. In addition, two types of inversion wall, loop-like and splay-type walls, were also found to be decorated by the solidification-induced band texture.     

有机硅侧链液晶研究进展

综述了国内外有机硅侧链液晶近年来的研究进展，对近晶型、席夫碱型、向列型、胆甾型、偶氮苯型、鱼骨型以及光学非线性型几种主要类型的有机硅侧链液晶进行了详细介绍，并对近年来受到重视的有机硅侧链液晶电流性和离聚物研究进展作了较全面的总结，最后对其应用前景进行了展望。     

Synthesis and mesomorphic behaviour of novel chiral nematic side chain liquid crystalline polysiloxanes

A series of novel thermotropic side chain liquid crystalline polymers was synthesized by grafting copolymerization of a mesogenic monomer, 4-allyloxybenzoyl-4′?-(4-n-alkylbenzoyl)–p-benzenediol bisate and a chiral monomer, menthyl undecylenate. The mesogenic monomers exhibited nematic threadlike textures during heating and cooling. The polymers showed thermotropic liquid crystalline properties with a broad mesomorphic region over a range of 100°C. The polymers exhibited a cholesteric mesophase with a colourful Grand-Jean texture when the content of chiral units was greater than 15?mol?%; the others exhibited nematic threadlike textures. All of the polymers were thermally stable over 300°C, and most were laevorotatory as the chiral monomer.     

Liquid crystalline side chain polymer with a poly (Geraniol-co-MMA) backbone and phenylbenzoate mesogenic group: synthesis and characterization

A new side chain liquid crystalline polymers have been synthesized and characterized in which [geraniol-co-MMA] polymer are used as a backbone linked via polymethylene spacer to phenyl benzoate mesogenic group. The polymer exhibits enantiotropic liquid crystallinity with nematic phase and does not exhibit side chain crystallization .A clear difference between the nature of the mesophase is evidenced between [Geraniol-co-MMA] main chain and methacrylate polymers .The LC polymer exhibit glass transition at 40 °C. In a comparative analysis, we discuss the relevance of polymer backbone in the synthesis of side chain liquid crystalline polymers.     

聚硅氧烷侧链液晶高分子的合成与表征

研究以对－烯丙氧基苯甲酸对－氰基苯酚酯为单体的聚硅氧烷侧链液晶高分子的合成方法。首先利用Williamson反应生成醚、羧酸酰化、酯化反应得到单体,然后利用硅氢化反应将单体接枝到聚甲基氢硅氧烷上得到目标产物。用IR,NMR及热台偏光显微镜等方法对单体和聚合物进行了结构表征和液晶行为分析。优化了对－烯丙氧基苯甲酸对－氰基苯酯为单体的聚硅氧烷侧链液晶高分子的合成工艺条件,提高了产率。样品表征结果证明单体和聚合物均呈现近晶液晶相,为特殊功能材料提供了原料。     

聚丙烯酸酯侧链液晶聚合物的合成与表征

以对羟基苯甲酸、氯乙醇和丙烯酸为主要原料,经醚化、酯化和酰氯化反应合成了中间体和含液晶基元的丙烯酸酯单体,后者经自由基聚合合成了聚丙烯酸酯侧链液晶聚合物。用偏光显微镜观察了单体和聚合物的织态结构,用DSC和IR对聚合物进行了表征。结果表明,单体和聚合物均呈现向列型液晶织态结构,聚合物在较宽的温度范围内有很好的液晶性。     

Preparation and properties of siloxane liquid crystalline elastomers with a mesogenic crosslinking agent

A mesogenic crosslinking agent M-1 was synthesized to minimize the perturbations of non-mesogenic crosslinking agents in liquid crystalline elastomers. The synthesis of new side chain liquid crystalline elastomers containing the rigid mesogenic crosslinking agent M-1 and nematic monomer M-2 by a one-step hydrosilylation reaction is described. The chemical structures of the monomers and network polymers obtained were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties and phase behaviour were investigated by differential scanning calorimetry, polarizing optical microscopy, and X-ray diffraction. The influence of the crosslinking units on phase behaviour is discussed. Liquid crystalline elastomers containing less than 15 mol % of the crosslinking units showed elasticity, reversible phase transitions and a threaded texture. The experimental results demonstrated that the glass transition temperature of polymers P-1-7 increased with increasing concentration of crosslinking agent M-1; but the isotropic temperature and liquid crystalline range decreased slightly.